//===========================================================================
// create a tmp AAS area from a leaf node
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
tmp_node_t *AAS_CreateArea(node_t *node)
{
int pside;
int areafaceflags;
portal_t *p;
tmp_face_t *tmpface;
tmp_area_t *tmparea;
tmp_node_t *tmpnode;
//create an area from this leaf
tmparea = AAS_AllocTmpArea();
tmparea->tmpfaces = NULL;
//clear the area face flags
areafaceflags = 0;
//make aas faces from the portals
for (p = node->portals; p; p = p->next[pside])
{
pside = (p->nodes[1] == node);
//don't create faces from very small portals
// if (WindingArea(p->winding) < 1) continue;
//if there's already a face created for this portal
if (p->tmpface)
{
//add the back side of the face to the area
AAS_AddFaceSideToArea(p->tmpface, 1, tmparea);
} //end if
else
{
tmpface = AAS_AllocTmpFace();
//set the face pointer at the portal so we can see from
//the portal there's a face created for it
p->tmpface = tmpface;
//FIXME: test this change
//tmpface->planenum = (p->planenum & ~1) | pside;
tmpface->planenum = p->planenum ^ pside;
if (pside) tmpface->winding = ReverseWinding(p->winding);
else tmpface->winding = CopyWinding(p->winding);
#ifdef L_DEBUG
//
AAS_CheckFaceWindingPlane(tmpface);
#endif //L_DEBUG
//if there's solid at the other side of the portal
if (p->nodes[!pside]->contents & (CONTENTS_SOLID | CONTENTS_PLAYERCLIP))
{
tmpface->faceflags |= FACE_SOLID;
} //end if
//else there is no solid at the other side and if there
//is a liquid at this side
else if (node->contents & (CONTENTS_WATER|CONTENTS_SLIME|CONTENTS_LAVA))
{
tmpface->faceflags |= FACE_LIQUID;
//if there's no liquid at the other side
if (!(p->nodes[!pside]->contents & (CONTENTS_WATER|CONTENTS_SLIME|CONTENTS_LAVA)))
{
tmpface->faceflags |= FACE_LIQUIDSURFACE;
} //end if
} //end else
//if there's ladder contents at other side of the portal
if ((p->nodes[pside]->contents & CONTENTS_LADDER) ||
(p->nodes[!pside]->contents & CONTENTS_LADDER))
{
//NOTE: doesn't have to be solid at the other side because
// when standing one can use a crouch area (which is not solid)
// as a ladder
// imagine a ladder one can walk underthrough,
// under the ladder against the ladder is a crouch area
// the (vertical) sides of this crouch area area also used as
// ladder sides when standing (not crouched)
tmpface->faceflags |= FACE_LADDER;
} //end if
//if it is possible to stand on the face
if (AAS_GroundFace(tmpface))
{
tmpface->faceflags |= FACE_GROUND;
} //end if
//
areafaceflags |= tmpface->faceflags;
//no aas face number yet (zero is a dummy in the aasworld faces)
tmpface->aasfacenum = 0;
//add the front side of the face to the area
AAS_AddFaceSideToArea(tmpface, 0, tmparea);
} //end else
} //end for
qprintf("\r%6d", tmparea->areanum);
//presence type in the area
tmparea->presencetype = ~node->expansionbboxes & cfg.allpresencetypes;
//
tmparea->contents = 0;
if (node->contents & CONTENTS_CLUSTERPORTAL) tmparea->contents |= AREACONTENTS_CLUSTERPORTAL;
if (node->contents & CONTENTS_MOVER) tmparea->contents |= AREACONTENTS_MOVER;
if (node->contents & CONTENTS_TELEPORTER) tmparea->contents |= AREACONTENTS_TELEPORTER;
if (node->contents & CONTENTS_JUMPPAD) tmparea->contents |= AREACONTENTS_JUMPPAD;
if (node->contents & CONTENTS_DONOTENTER) tmparea->contents |= AREACONTENTS_DONOTENTER;
if (node->contents & CONTENTS_WATER) tmparea->contents |= AREACONTENTS_WATER;
if (node->contents & CONTENTS_LAVA) tmparea->contents |= AREACONTENTS_LAVA;
if (node->contents & CONTENTS_SLIME) tmparea->contents |= AREACONTENTS_SLIME;
if (node->contents & CONTENTS_NOTTEAM1) tmparea->contents |= AREACONTENTS_NOTTEAM1;
if (node->contents & CONTENTS_NOTTEAM2) tmparea->contents |= AREACONTENTS_NOTTEAM2;
//store the bsp model that's inside this node
tmparea->modelnum = node->modelnum;
//sorta check for flipped area faces (remove??)
AAS_FlipAreaFaces(tmparea);
//check if the area is ok (remove??)
AAS_CheckArea(tmparea);
//
tmpnode = AAS_AllocTmpNode();
tmpnode->planenum = 0;
tmpnode->children[0] = 0;
tmpnode->children[1] = 0;
tmpnode->tmparea = tmparea;
//
return tmpnode;
} //end of the function AAS_CreateArea
tmp_node_t *AAS_CreateArea( node_t *node ) {
int pside;
int areafaceflags;
portal_t *p;
tmp_face_t *tmpface;
tmp_area_t *tmparea;
tmp_node_t *tmpnode;
vec3_t up = {0, 0, 1};
// vec3_t mins, maxs;
// qboolean allowFreeIfSmall = 1;
// VectorClear( mins );
// VectorClear( maxs );
//create an area from this leaf
tmparea = AAS_AllocTmpArea();
tmparea->tmpfaces = NULL;
//clear the area face flags
areafaceflags = 0;
//make aas faces from the portals
for ( p = node->portals; p; p = p->next[pside] )
{
pside = ( p->nodes[1] == node );
//don't create faces from very small portals
// if (WindingArea(p->winding) < 1) continue;
//if there's already a face created for this portal
if ( p->tmpface ) {
//add the back side of the face to the area
AAS_AddFaceSideToArea( p->tmpface, 1, tmparea );
} //end if
else
{
tmpface = AAS_AllocTmpFace();
//set the face pointer at the portal so we can see from
//the portal there's a face created for it
p->tmpface = tmpface;
//FIXME: test this change
//tmpface->planenum = (p->planenum & ~1) | pside;
tmpface->planenum = p->planenum ^ pside;
if ( pside ) {
tmpface->winding = ReverseWinding( p->winding );
} else { tmpface->winding = CopyWinding( p->winding );}
#ifdef L_DEBUG
//
AAS_CheckFaceWindingPlane( tmpface );
#endif //L_DEBUG
//if there's solid at the other side of the portal
if ( p->nodes[!pside]->contents & ( CONTENTS_SOLID | CONTENTS_PLAYERCLIP | CONTENTS_MONSTERCLIP ) ) {
tmpface->faceflags |= FACE_SOLID;
} //end if
//else there is no solid at the other side and if there
//is a liquid at this side
else if ( node->contents & ( CONTENTS_WATER | CONTENTS_SLIME | CONTENTS_LAVA ) ) {
tmpface->faceflags |= FACE_LIQUID;
//if there's no liquid at the other side
if ( !( p->nodes[!pside]->contents & ( CONTENTS_WATER | CONTENTS_SLIME | CONTENTS_LAVA ) ) ) {
tmpface->faceflags |= FACE_LIQUIDSURFACE;
} //end if
} //end else
//if there's ladder contents at other side of the portal
if ( ( p->nodes[pside]->contents & CONTENTS_LADDER ) ||
( p->nodes[!pside]->contents & CONTENTS_LADDER ) ) {
//NOTE: doesn't have to be solid at the other side because
// when standing one can use a crouch area (which is not solid)
// as a ladder
// imagine a ladder one can walk underthrough,
// under the ladder against the ladder is a crouch area
// the (vertical) sides of this crouch area area also used as
// ladder sides when standing (not crouched)
tmpface->faceflags |= FACE_LADDER;
} //end if
//if it is possible to stand on the face
if ( AAS_GroundFace( tmpface ) ) {
tmpface->faceflags |= FACE_GROUND;
} //end if
//
areafaceflags |= tmpface->faceflags;
//no aas face number yet (zero is a dummy in the aasworld faces)
tmpface->aasfacenum = 0;
//add the front side of the face to the area
AAS_AddFaceSideToArea( tmpface, 0, tmparea );
} //end else
/*
// RF, add this face to the bounds
if (p->tmpface->faceflags & FACE_GROUND) {
WindingBounds( p->winding, mins, maxs );
}
// RF, if this face has a solid at the other side, and it is not a GROUND, then we cannot free if its too small
if (allowFreeIfSmall && (p->tmpface->faceflags & FACE_SOLID) && !(p->tmpface->faceflags & FACE_GROUND)) {
// make sure it's not a ceiling
if (!(DotProduct(cfg.phys_gravitydirection, mapplanes[p->tmpface->planenum].normal) > cfg.phys_maxsteepness)) {
allowFreeIfSmall = 0;
}
}
*/
} //end for
qprintf( "\r%6d", tmparea->areanum );
//presence type in the area
tmparea->presencetype = ~node->expansionbboxes & cfg.allpresencetypes;
//
tmparea->contents = 0;
if ( node->contents & CONTENTS_CLUSTERPORTAL ) {
tmparea->contents |= AREACONTENTS_CLUSTERPORTAL;
}
if ( node->contents & CONTENTS_MOVER ) {
tmparea->contents |= AREACONTENTS_MOVER;
}
if ( node->contents & CONTENTS_TELEPORTER ) {
tmparea->contents |= AREACONTENTS_TELEPORTER;
}
if ( node->contents & CONTENTS_JUMPPAD ) {
tmparea->contents |= AREACONTENTS_JUMPPAD;
}
if ( node->contents & CONTENTS_DONOTENTER ) {
tmparea->contents |= AREACONTENTS_DONOTENTER;
}
if ( node->contents & CONTENTS_DONOTENTER_LARGE ) {
tmparea->contents |= AREACONTENTS_DONOTENTER_LARGE;
}
if ( node->contents & CONTENTS_WATER ) {
tmparea->contents |= AREACONTENTS_WATER;
}
if ( node->contents & CONTENTS_LAVA ) {
tmparea->contents |= AREACONTENTS_LAVA;
}
if ( node->contents & CONTENTS_SLIME ) {
tmparea->contents |= AREACONTENTS_SLIME;
}
/*
// RF, if we are using only ground areas, then ignore areas that arent grounded or attached to ladders, or underwater
if (groundonly && !(areafaceflags & (FACE_GROUND|FACE_LADDER)) && !(tmparea->contents & (AREACONTENTS_WATER|AREACONTENTS_SLIME|AREACONTENTS_LAVA))) {
numGroundOnlyFreed++;
tmparea->invalid = true;
}
*/
/*
// RF, if this is a really small area, and it is surrounded by non-solid portals, then nuke it
if (allowFreeIfSmall && !(areafaceflags & (FACE_LADDER)) && VectorDistance( mins, maxs ) < 32) {
numTinyFreed++;
tmparea->invalid = true;
}
*/
//store the bsp model that's inside this node
tmparea->modelnum = node->modelnum;
//sorta check for flipped area faces (remove??)
AAS_FlipAreaFaces( tmparea );
//check if the area is ok (remove??)
AAS_CheckArea( tmparea );
//
tmpnode = AAS_AllocTmpNode();
tmpnode->planenum = 0;
tmpnode->children[0] = 0;
tmpnode->children[1] = 0;
tmpnode->tmparea = tmparea;
//
return tmpnode;
} //end of the function AAS_CreateArea
//===========================================================================
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
void AAS_SplitArea( tmp_area_t *tmparea, int planenum, tmp_area_t **frontarea, tmp_area_t **backarea ) {
int side;
tmp_area_t *facefrontarea, *facebackarea, *faceotherarea;
tmp_face_t *face, *frontface, *backface, *splitface, *nextface;
winding_t *splitwinding;
plane_t *splitplane;
/*
#ifdef AW_DEBUG
int facesplits, groundsplits, epsilonface;
Log_Print("\n----------------------\n");
Log_Print("splitting area %d\n", areanum);
Log_Print("with normal = \'%f %f %f\', dist = %f\n", normal[0], normal[1], normal[2], dist);
AAS_TestSplitPlane(areanum, normal, dist, &facesplits, &groundsplits, &epsilonface);
Log_Print("face splits = %d\nground splits = %d\n", facesplits, groundsplits);
if (epsilonface) Log_Print("aaahh epsilon face\n");
#endif //AW_DEBUG*/
//the original area
AAS_FlipAreaFaces( tmparea );
AAS_CheckArea( tmparea );
//
splitplane = &mapplanes[planenum];
/* //create a split winding, first base winding for plane
splitwinding = BaseWindingForPlane(splitplane->normal, splitplane->dist);
//chop with all the faces of the area
for (face = tmparea->tmpfaces; face && splitwinding; face = face->next[side])
{
//side of the face the original area was on
side = face->frontarea != tmparea->areanum;
plane = &mapplanes[face->planenum ^ side];
ChopWindingInPlace(&splitwinding, plane->normal, plane->dist, 0); // PLANESIDE_EPSILON);
} //end for*/
splitwinding = AAS_SplitWinding( tmparea, planenum );
if ( !splitwinding ) {
/*
#ifdef DEBUG
AAS_TestSplitPlane(areanum, normal, dist, &facesplits, &groundsplits, &epsilonface);
Log_Print("\nface splits = %d\nground splits = %d\n", facesplits, groundsplits);
if (epsilonface) Log_Print("aaahh epsilon face\n");
#endif //DEBUG*/
Error( "AAS_SplitArea: no split winding when splitting area %d\n", tmparea->areanum );
} //end if
//create a split face
splitface = AAS_AllocTmpFace();
//get the map plane
splitface->planenum = planenum;
//store the split winding
splitface->winding = splitwinding;
//the new front area
( *frontarea ) = AAS_AllocTmpArea();
( *frontarea )->presencetype = tmparea->presencetype;
( *frontarea )->contents = tmparea->contents;
( *frontarea )->modelnum = tmparea->modelnum;
( *frontarea )->tmpfaces = NULL;
//the new back area
( *backarea ) = AAS_AllocTmpArea();
( *backarea )->presencetype = tmparea->presencetype;
( *backarea )->contents = tmparea->contents;
( *backarea )->modelnum = tmparea->modelnum;
( *backarea )->tmpfaces = NULL;
//add the split face to the new areas
AAS_AddFaceSideToArea( splitface, 0, ( *frontarea ) );
AAS_AddFaceSideToArea( splitface, 1, ( *backarea ) );
//split all the faces of the original area
for ( face = tmparea->tmpfaces; face; face = nextface )
{
//side of the face the original area was on
side = face->frontarea != tmparea;
//next face of the original area
nextface = face->next[side];
//front area of the face
facefrontarea = face->frontarea;
//back area of the face
facebackarea = face->backarea;
//remove the face from both the front and back areas
if ( facefrontarea ) {
AAS_RemoveFaceFromArea( face, facefrontarea );
}
if ( facebackarea ) {
AAS_RemoveFaceFromArea( face, facebackarea );
}
//split the face
AAS_SplitFace( face, splitplane->normal, splitplane->dist, &frontface, &backface );
//free the original face
AAS_FreeTmpFace( face );
//get the number of the area at the other side of the face
if ( side ) {
faceotherarea = facefrontarea;
} else { faceotherarea = facebackarea;}
//if there is an area at the other side of the original face
if ( faceotherarea ) {
if ( frontface ) {
AAS_AddFaceSideToArea( frontface, !side, faceotherarea );
}
if ( backface ) {
AAS_AddFaceSideToArea( backface, !side, faceotherarea );
}
} //end if
//add the front and back part left after splitting the original face to the new areas
if ( frontface ) {
AAS_AddFaceSideToArea( frontface, side, ( *frontarea ) );
}
if ( backface ) {
AAS_AddFaceSideToArea( backface, side, ( *backarea ) );
}
} //end for
if ( !( *frontarea )->tmpfaces ) {
Log_Print( "AAS_SplitArea: front area without faces\n" );
}
if ( !( *backarea )->tmpfaces ) {
Log_Print( "AAS_SplitArea: back area without faces\n" );
}
tmparea->invalid = true;
/*
#ifdef AW_DEBUG
for (i = 0, face = frontarea->tmpfaces; face; face = face->next[side])
{
side = face->frontarea != frontarea->areanum;
i++;
} //end for
Log_Print("created front area %d with %d faces\n", frontarea->areanum, i);
for (i = 0, face = backarea->tmpfaces; face; face = face->next[side])
{
side = face->frontarea != backarea->areanum;
i++;
} //end for
Log_Print("created back area %d with %d faces\n", backarea->areanum, i);
#endif //AW_DEBUG*/
AAS_FlipAreaFaces( ( *frontarea ) );
AAS_FlipAreaFaces( ( *backarea ) );
//
AAS_CheckArea( ( *frontarea ) );
AAS_CheckArea( ( *backarea ) );
} //end of the function AAS_SplitArea
//===========================================================================
// try to merge the areas at both sides of the given face
//
// Parameter: seperatingface : face that seperates two areas
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_TryMergeFaceAreas( tmp_face_t *seperatingface ) {
int side1, side2, area1faceflags, area2faceflags;
tmp_area_t *tmparea1, *tmparea2, *newarea;
tmp_face_t *face1, *face2, *nextface1, *nextface2;
tmparea1 = seperatingface->frontarea;
tmparea2 = seperatingface->backarea;
//areas must have the same presence type
if ( tmparea1->presencetype != tmparea2->presencetype ) {
return false;
}
//areas must have the same area contents
if ( tmparea1->contents != tmparea2->contents ) {
return false;
}
//areas must have the same bsp model inside (or both none)
if ( tmparea1->modelnum != tmparea2->modelnum ) {
return false;
}
area1faceflags = 0;
area2faceflags = 0;
for ( face1 = tmparea1->tmpfaces; face1; face1 = face1->next[side1] )
{
side1 = ( face1->frontarea != tmparea1 );
//debug: check if the area belongs to the area
if ( face1->frontarea != tmparea1 &&
face1->backarea != tmparea1 ) {
Error( "face does not belong to area1" );
}
//just continue if the face is seperating the two areas
//NOTE: a result of this is that ground and gap areas can
// be merged if the seperating face is the gap
if ( ( face1->frontarea == tmparea1 &&
face1->backarea == tmparea2 ) ||
( face1->frontarea == tmparea2 &&
face1->backarea == tmparea1 ) ) {
continue;
}
//get area1 face flags
area1faceflags |= face1->faceflags;
if ( AAS_GapFace( face1, side1 ) ) {
area1faceflags |= FACE_GAP;
}
//
for ( face2 = tmparea2->tmpfaces; face2; face2 = face2->next[side2] )
{
side2 = ( face2->frontarea != tmparea2 );
//debug: check if the area belongs to the area
if ( face2->frontarea != tmparea2 &&
face2->backarea != tmparea2 ) {
Error( "face does not belong to area2" );
}
//just continue if the face is seperating the two areas
//NOTE: a result of this is that ground and gap areas can
// be merged if the seperating face is the gap
if ( ( face2->frontarea == tmparea1 &&
face2->backarea == tmparea2 ) ||
( face2->frontarea == tmparea2 &&
face2->backarea == tmparea1 ) ) {
continue;
}
//get area2 face flags
area2faceflags |= face2->faceflags;
if ( AAS_GapFace( face2, side2 ) ) {
area2faceflags |= FACE_GAP;
}
//if the two faces would create a non-convex area
if ( NonConvex( face1, face2, side1, side2 ) ) {
return false;
}
} //end for
} //end for
//if one area has gap faces (that aren't seperating the two areas)
//and the other has ground faces (that aren't seperating the two areas),
//the areas can't be merged
if ( ( ( area1faceflags & FACE_GROUND ) && ( area2faceflags & FACE_GAP ) ) ||
( ( area2faceflags & FACE_GROUND ) && ( area1faceflags & FACE_GAP ) ) ) {
// Log_Print(" can't merge: ground/gap\n");
return false;
} //end if
// Log_Print("merged area %d & %d to %d with %d faces\n", tmparea1->areanum, tmparea2->areanum, newarea->areanum, numfaces);
// return false;
//
//AAS_CheckArea(tmparea1);
//AAS_CheckArea(tmparea2);
//create the new area
newarea = AAS_AllocTmpArea();
newarea->presencetype = tmparea1->presencetype;
newarea->contents = tmparea1->contents;
newarea->modelnum = tmparea1->modelnum;
newarea->tmpfaces = NULL;
//add all the faces (except the seperating ones) from the first area
//to the new area
for ( face1 = tmparea1->tmpfaces; face1; face1 = nextface1 )
{
side1 = ( face1->frontarea != tmparea1 );
nextface1 = face1->next[side1];
//don't add seperating faces
if ( ( face1->frontarea == tmparea1 &&
face1->backarea == tmparea2 ) ||
( face1->frontarea == tmparea2 &&
face1->backarea == tmparea1 ) ) {
continue;
} //end if
//
AAS_RemoveFaceFromArea( face1, tmparea1 );
AAS_AddFaceSideToArea( face1, side1, newarea );
} //end for
//add all the faces (except the seperating ones) from the second area
//to the new area
for ( face2 = tmparea2->tmpfaces; face2; face2 = nextface2 )
{
side2 = ( face2->frontarea != tmparea2 );
nextface2 = face2->next[side2];
//don't add seperating faces
if ( ( face2->frontarea == tmparea1 &&
face2->backarea == tmparea2 ) ||
( face2->frontarea == tmparea2 &&
face2->backarea == tmparea1 ) ) {
continue;
} //end if
//
AAS_RemoveFaceFromArea( face2, tmparea2 );
AAS_AddFaceSideToArea( face2, side2, newarea );
} //end for
//free all shared faces
for ( face1 = tmparea1->tmpfaces; face1; face1 = nextface1 )
{
side1 = ( face1->frontarea != tmparea1 );
nextface1 = face1->next[side1];
//
AAS_RemoveFaceFromArea( face1, face1->frontarea );
AAS_RemoveFaceFromArea( face1, face1->backarea );
AAS_FreeTmpFace( face1 );
} //end for
//
tmparea1->mergedarea = newarea;
tmparea1->invalid = true;
tmparea2->mergedarea = newarea;
tmparea2->invalid = true;
//
AAS_CheckArea( newarea );
AAS_FlipAreaFaces( newarea );
// Log_Print("merged area %d & %d to %d with %d faces\n", tmparea1->areanum, tmparea2->areanum, newarea->areanum);
return true;
} //end of the function AAS_TryMergeFaceAreas
