AVL_DVBSx_ErrorCode AVL6211_Initialize(struct AVL_DVBSx_Chip * pAVLChip,struct AVL_Tuner * pTuner)
{
struct AVL_DVBSx_Diseqc_Para sDiseqcPara;
struct AVL_DVBSx_MpegInfo sMpegMode;
AVL_DVBSx_ErrorCode r = AVL_DVBSx_EC_OK;
struct AVL_Demod_Tuner_Configuration_t *pDemodTunerConfig = &g_DemodTuner_Config[g_nDemodTunerArrayIndex];
struct AVL_DVBSx_VerInfo VerInfo;
//AVL_uint32 uiTemp;
AVL_uint32 uiDeviceID=0;
#if 0
//This function should be implemented by customer.
//This function should be called before all other functions to prepare everything for a BSP operation.
r = AVL_DVBSx_IBSP_Initialize();
if( AVL_DVBSx_EC_OK != r )
{
printf("BSP Initialization failed !\n");
return (r);
}
#endif
pAVLChip->m_uiBusId=pDemodTunerConfig->m_ChannelId;
// This function should be called after bsp initialized to initialize the chip object.
r = Init_AVL_DVBSx_ChipObject(pAVLChip, pDemodTunerConfig->m_uiDemodAddress);
if( AVL_DVBSx_EC_OK != r )
{
printf("Chip Object Initialization failed !\n");
return (r);
}
//Judge the chip ID of current chip.
//r = AVL_DVBSx_II2C_Read32(pAVLChip, rom_ver_addr, &uiTemp);
r= AVL_DVBSx_IRx_GetDeviceID( pAVLChip, &uiDeviceID);
printk("r is %x,uiDeviceID is %x\n",r,uiDeviceID);
if (AVL_DVBSx_EC_OK != r)
{
printf("Get Chip ID failed !\n");
return (r);
}
//if ( uiTemp != Chip_ID )
if(uiDeviceID != Chip_ID )
{
printf("Chip ID isn't correct !\n");
return AVL_DVBSx_EC_GeneralFail;
}
//This function should be called after chip object initialized to initialize the IBase,using reference clock as 10M. Make sure you pickup the right pll_conf since it may be modified in BSP.
r = AVL_DVBSx_IBase_Initialize(&(pll_conf[pDemodTunerConfig->m_DemodReferenceClk]), ucPatchData, pAVLChip);
if( AVL_DVBSx_EC_OK != r )
{
printf("IBase Initialization failed !\n");
return (r);
}
AVL_DVBSx_IBSP_Delay(100); //Wait 100 ms to assure that the AVL_DVBSx chip boots up.This function should be implemented by customer.
//This function should be called to verify the AVL_DVBSx chip has completed its initialization procedure.
r = AVL_DVBSx_IBase_GetStatus(pAVLChip);
if( AVL_DVBSx_EC_OK != r )
{
printf("Booted failed !\n");
return (r);
}
printf("Booted !\n");
//Get Chip ID, Patch version and SDK version.
AVL_DVBSx_IBase_GetVersion( &VerInfo, pAVLChip);
printf("Chip Ver:{%d}.{%d}.{%d} API Ver:{%d}.{%d}.{%d} Patch Ver:{%d}.{%d}.{%d} \n",
VerInfo.m_Chip.m_Major, VerInfo.m_Chip.m_Minor, VerInfo.m_Chip.m_Build,
VerInfo.m_API.m_Major, VerInfo.m_API.m_Minor, VerInfo.m_API.m_Build,
VerInfo.m_Patch.m_Major, VerInfo.m_Patch.m_Minor, VerInfo.m_Patch.m_Build);
//This function should be called after IBase initialized to initialize the demod.
r = AVL_DVBSx_IRx_Initialize(pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("Demod Initialization failed !\n");
return (r);
}
//This function should be called after demod initialized to set RF AGC polar.
//User does not need to setup this for Sharp tuner since it is the default value. But for other tuners, user may need to do it here.
r |= AVL_DVBSx_IRx_SetRFAGCPola(pDemodTunerConfig->m_TunerRFAGC, pAVLChip);
r |= AVL_DVBSx_IRx_DriveRFAGC(pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("Set RF AGC Polar failed !\n");
return (r);
}
//This function should be called after demod initialized to set spectrum polar.
r = AVL_DVBSx_IBase_SetSpectrumPolarity(pDemodTunerConfig->m_Tuner_IQ_SpectrumMode, pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("Set Spectrum Polar failed !\n");
return (r);
}
//Setup MPEG mode parameters.
sMpegMode.m_MpegFormat = pDemodTunerConfig->m_TSFormat;
sMpegMode.m_MpegMode = pDemodTunerConfig->m_TSOutPutMode;
sMpegMode.m_MpegClockPolarity = pDemodTunerConfig->m_TSClockPolarity;
//This function should be called after demod initialized to set MPEG mode.(These parameters will be valid after call lock channel function)
r = AVL_DVBSx_IRx_SetMpegMode(&sMpegMode,pAVLChip );
if(sMpegMode.m_MpegMode == AVL_DVBSx_MPM_Serial)
{
AVL_DVBSx_IRx_SetMpegSerialPin(pAVLChip,pDemodTunerConfig->m_SerDataPin);
}
if(AVL_DVBSx_EC_OK != r)
{
printf("Set MPEG output mode failed !\n");
return (r);
}
// Enable the MPEG output (this function call has no effect for the AVL_DVBSxLG and AVL_DVBSxLGa devices)
r = AVL_DVBSx_IRx_DriveMpegOutput(pAVLChip);
//Setup tuner parameters for tuner initialization.
pTuner->m_uiSlaveAddress = pDemodTunerConfig->m_uiTunerAddress;
pTuner->m_uiI2CBusClock_kHz = pDemodTunerConfig->m_uiTuner_I2Cbus_clock;
pTuner->m_pParameters = 0;
pTuner->m_pAVLChip = pAVLChip;
pTuner->m_pInitializeFunc = pDemodTunerConfig->m_pInitializeFunc;
pTuner->m_pLockFunc = pDemodTunerConfig->m_pLockFunc;
pTuner->m_pGetLockStatusFunc = pDemodTunerConfig->m_pGetLockStatusFunc;
//This function should be called after IBase initialized to initialize the tuner.
r = pTuner->m_pInitializeFunc(pTuner);
if(AVL_DVBSx_EC_OK != r)
{
printf("Tuner Initialization failed !\n");
return (r);
}
//Setup DiSEqC parameters for DiSEqC initialization.
sDiseqcPara.m_RxTimeout = AVL_DVBSx_DRT_150ms;
sDiseqcPara.m_RxWaveForm = AVL_DVBSx_DWM_Normal;
sDiseqcPara.m_ToneFrequency_kHz = Diseqc_Tone_Frequency;
sDiseqcPara.m_TXGap = AVL_DVBSx_DTXG_15ms;
sDiseqcPara.m_TxWaveForm = AVL_DVBSx_DWM_Normal;
//The DiSEqC should be initialized if AVL_DVBSx need to supply power to LNB. This function should be called after IBase initialized to initialize the DiSEqC.
r = AVL_DVBSx_IDiseqc_Initialize(&sDiseqcPara, pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("DiSEqC Initialization failed !\n");
}
return (r);
}
AVL_DVBSx_ErrorCode Initialize(struct AVL_DVBSx_Chip * pAVLChip)
{
struct AVL_DVBSx_Diseqc_Para sDiseqcPara;
AVL_DVBSx_ErrorCode r=AVL_DVBSx_EC_OK;
struct AVL_DVBSx_VerInfo VerInfo;
//AVL_uint32 uiTemp;
AVL_uint32 uiDeviceID=0;
/*
//This function should be implemented by customer.
//This function should be called before all other functions to prepare everything for a BSP operation.
r = AVL_DVBSx_IBSP_Initialize();
if( AVL_DVBSx_EC_OK !=r )
{
printf("BSP Initialization failed !\n");
return (r);
}
*/
// This function should be called after bsp initialized to initialize the chip object.
r = Init_AVL_DVBSx_ChipObject(pAVLChip, AVL_DVBSx_SA_0);
if( AVL_DVBSx_EC_OK !=r )
{
printf("Chip Object Initialization failed !\n");
return (r);
}
//Judge the chip ID of current chip.
r= AVL_DVBSx_IRx_GetDeviceID( pAVLChip, &uiDeviceID);
//r = AVL_DVBSx_II2C_Read32(pAVLChip, rom_ver_addr, &uiTemp);
if (AVL_DVBSx_EC_OK != r)
{
printf("Get Chip ID failed !\n");
return (r);
}
//if ( uiTemp != Chip_ID )
if(uiDeviceID != Chip_ID )
{
printf("uiDeviceID:0x%x,Chip ID isn't correct!\n",uiDeviceID);
return AVL_DVBSx_EC_GeneralFail;
}
//This function should be called after chip object initialized to initialize the IBase,using reference clock as 10M. Make sure you pickup the right pll_conf since it may be modified in BSP.
r = AVL_DVBSx_IBase_Initialize(const_cast<AVL_DVBSx_PllConf *>(pll_conf+2), ucPatchData, pAVLChip);
if( AVL_DVBSx_EC_OK !=r )
{
printf("IBase Initialization failed !\n");
return (r);
}
AVL_DVBSx_IBSP_Delay(100); //Wait 100 ms to assure that the AVLDVBSx chip boots up.This function should be implemented by customer.
//This function should be called to verify the AVLDVBSx chip has completed its initialization procedure.
r = AVL_DVBSx_IBase_GetStatus(pAVLChip);
if( AVL_DVBSx_EC_OK != r )
{
printf("Booted failed !\n");
return (r);
}
printf("Booted !\n");
//Get Chip ID, Patch version and SDK version.
AVL_DVBSx_IBase_GetVersion( &VerInfo, pAVLChip);
printf("Chip Ver:{%d}.{%d}.{%d} API Ver:{%d}.{%d}.{%d} Patch Ver:{%d}.{%d}.{%d} \n",
VerInfo.m_Chip.m_Major, VerInfo.m_Chip.m_Minor, VerInfo.m_Chip.m_Build,
VerInfo.m_API.m_Major, VerInfo.m_API.m_Minor, VerInfo.m_API.m_Build,
VerInfo.m_Patch.m_Major, VerInfo.m_Patch.m_Minor, VerInfo.m_Patch.m_Build);
//This function should be called after IBase initialized to initialize the demod.
r = AVL_DVBSx_IRx_Initialize(pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("Demod Initialization failed !\n");
return (r);
}
//This function should be called after demod initialized to set RF AGC polar.
//User does not need to setup this for Sharp tuner since it is the default value. But for other tuners, user may need to do it here.
r |= AVL_DVBSx_IRx_SetRFAGCPola(AVL_DVBSx_RA_Invert, pAVLChip);
r |= AVL_DVBSx_IRx_DriveRFAGC(pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("Set RF AGC Polar failed !\n");
return (r);
}
//This function should be called after demod initialized to set spectrum polar.
r = AVL_DVBSx_IBase_SetSpectrumPolarity(AVL_DVBSx_Spectrum_Normal, pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("Set Spectrum Polar failed !\n");
return (r);
}
//Setup DiSEqC parameters for DiSEqC initialization.
sDiseqcPara.m_RxTimeout = AVL_DVBSx_DRT_150ms;
sDiseqcPara.m_RxWaveForm = AVL_DVBSx_DWM_Normal;
sDiseqcPara.m_ToneFrequency_kHz = DiSEqC_Tone_Frequency;
sDiseqcPara.m_TXGap = AVL_DVBSx_DTXG_15ms;
sDiseqcPara.m_TxWaveForm = AVL_DVBSx_DWM_Normal;
//This function should be called after IBase initialized to initialize the DiSEqC.
r = AVL_DVBSx_IDiseqc_Initialize(&sDiseqcPara, pAVLChip);
if(AVL_DVBSx_EC_OK != r)
{
printf("DiSEqC Initialization failed !\n");
}
return (r);
}