bool Octree::boxTriangleIntersection(BoundingBox Box, Triangle triangle)
{
//This algorithm is a composition of 13 tests to determine intersection
//if all pass, there is overlap
float min,max,d,p0,p1,p2,rad,fex,fey,fez;
//center the box at (0,0,0) with respect to the triangle
//translate triangle vertices
Vector v0,v1,v2;
//edges of new triangle
Vector e0,e1,e2;
//Vector that goes half the diagonal of the bounding box
Vector boxHalfSize = (Box.boxMaxExtent - Box.boxMinExtent) / 2.0;
point boxCenter( (Box.boxMinExtent.px + Box.boxMaxExtent.px)/2.0,
(Box.boxMinExtent.py + Box.boxMaxExtent.py)/2.0,
(Box.boxMinExtent.pz + Box.boxMaxExtent.pz)/2.0 );
/*v0.set(triangle.Vertex[0].px-boxCenter.px,triangle.Vertex[0].py-boxCenter.py,triangle.Vertex[0].pz-boxCenter.pz);
v1.set(triangle.Vertex[1].px-boxCenter.px,triangle.Vertex[1].py-boxCenter.py,triangle.Vertex[1].pz-boxCenter.pz);
v2.set(triangle.Vertex[2].px-boxCenter.px,triangle.Vertex[2].py-boxCenter.py,triangle.Vertex[2].pz-boxCenter.pz);*/
v0 = triangle.Vertex[0] - boxCenter;
v1 = triangle.Vertex[1] - boxCenter;
v2 = triangle.Vertex[2] - boxCenter;
e0 = v1 - v0;
e1 = v2 - v1;
e2 = v0 - v2;
//the first 9 tests
fex = fabs(e0.px);
fey = fabs(e0.py);
fez = fabs(e0.pz);
AXISTEST_X01(e0.pz, e0.py, fez, fey);
AXISTEST_Y02(e0.pz, e0.px, fez, fex);
AXISTEST_Z12(e0.py, e0.px, fey, fex);
fex = fabs(e1.px);
fey = fabs(e1.py);
fez = fabs(e1.pz);
AXISTEST_X01(e1.pz, e1.py, fez, fey);
AXISTEST_Y02(e1.pz, e1.px, fez, fex);
AXISTEST_Z0(e1.py, e1.px, fey, fex);
fex = fabs(e2.px);
fey = fabs(e2.py);
fez = fabs(e2.pz);
AXISTEST_X2(e2.pz, e2.py, fez, fey);
AXISTEST_Y1(e2.pz, e2.px, fez, fex);
AXISTEST_Z12(e2.py, e2.px, fey, fex);
//now the 3 tests
//X test
FINDMINMAX(v0.px,v1.px,v2.px,min,max);
if(min>boxHalfSize.px || max<-boxHalfSize.px)
return false;
//Y test
FINDMINMAX(v0.py,v1.py,v2.py,min,max);
if(min>boxHalfSize.py || max<-boxHalfSize.py)
return false;
//Z test
FINDMINMAX(v0.pz,v1.pz,v2.pz,min,max);
if(min>boxHalfSize.pz || max<-boxHalfSize.pz)
return false;
Vector normal = e0.crossProduct(e1);
d = -(normal.dotProduct(v0));
if(!planeBoxOverlap(normal,d,boxHalfSize))
return false;
return true;
}
int triBoxOverlap(float boxcenter[3],float boxhalfsize[3],float triverts[3][3])
{
/* use separating axis theorem to test overlap between triangle and box */
/* need to test for overlap in these directions: */
/* 1) the {x,y,z}-directions (actually, since we use the AABB of the triangle */
/* we do not even need to test these) */
/* 2) normal of the triangle */
/* 3) crossproduct(edge from tri, {x,y,z}-directin) */
/* this gives 3x3=9 more tests */
float v0[3],v1[3],v2[3];
// float axis[3];
float min,max,p0,p1,p2,rad,fex,fey,fez; // -NJMP- "d" local variable removed
float normal[3],e0[3],e1[3],e2[3];
/* This is the fastest branch on Sun */
/* move everything so that the boxcenter is in (0,0,0) */
SUB(v0,triverts[0],boxcenter);
SUB(v1,triverts[1],boxcenter);
SUB(v2,triverts[2],boxcenter);
/* compute triangle edges */
SUB(e0,v1,v0); /* tri edge 0 */
SUB(e1,v2,v1); /* tri edge 1 */
SUB(e2,v0,v2); /* tri edge 2 */
/* Bullet 3: */
/* test the 9 tests first (this was faster) */
fex = fabsf(e0[X]);
fey = fabsf(e0[Y]);
fez = fabsf(e0[Z]);
AXISTEST_X01(e0[Z], e0[Y], fez, fey);
AXISTEST_Y02(e0[Z], e0[X], fez, fex);
AXISTEST_Z12(e0[Y], e0[X], fey, fex);
fex = fabsf(e1[X]);
fey = fabsf(e1[Y]);
fez = fabsf(e1[Z]);
AXISTEST_X01(e1[Z], e1[Y], fez, fey);
AXISTEST_Y02(e1[Z], e1[X], fez, fex);
AXISTEST_Z0(e1[Y], e1[X], fey, fex);
fex = fabsf(e2[X]);
fey = fabsf(e2[Y]);
fez = fabsf(e2[Z]);
AXISTEST_X2(e2[Z], e2[Y], fez, fey);
AXISTEST_Y1(e2[Z], e2[X], fez, fex);
AXISTEST_Z12(e2[Y], e2[X], fey, fex);
/* Bullet 1: */
/* first test overlap in the {x,y,z}-directions */
/* find min, max of the triangle each direction, and test for overlap in */
/* that direction -- this is equivalent to testing a minimal AABB around */
/* the triangle against the AABB */
/* test in X-direction */
FINDMINMAX(v0[X],v1[X],v2[X],min,max);
if(min>boxhalfsize[X] || max<-boxhalfsize[X]) return 0;
/* test in Y-direction */
FINDMINMAX(v0[Y],v1[Y],v2[Y],min,max);
if(min>boxhalfsize[Y] || max<-boxhalfsize[Y]) return 0;
/* test in Z-direction */
FINDMINMAX(v0[Z],v1[Z],v2[Z],min,max);
if(min>boxhalfsize[Z] || max<-boxhalfsize[Z]) return 0;
/* Bullet 2: */
/* test if the box intersects the plane of the triangle */
/* compute plane equation of triangle: normal*x+d=0 */
CROSS(normal,e0,e1);
// -NJMP- (line removed here)
if(!planeBoxOverlap(normal,v0,boxhalfsize)) return 0; // -NJMP-
return 1; /* box and triangle overlaps */
}
bool8 AtiTriBoxMoller( const TBM_FLOAT boxcenter[3], const TBM_FLOAT boxhalfsize[3],
const TBM_FLOAT triVert0[3], const TBM_FLOAT triVert1[3],
const TBM_FLOAT triVert2[3])
{
// use separating axis theorem to test overlap between triangle and box
// need to test for overlap in these directions:
// 1) the {x,y,z}-directions (actually, since we use the AABB of the triangle
// we do not even need to test these)
// 2) normal of the triangle
// 3) crossproduct(edge from tri, {x,y,z}-directin)
// this gives 3x3=9 more tests
TBM_FLOAT v0[3], v1[3], v2[3];
TBM_FLOAT min, max, d, p0, p1, p2, rad, fex, fey, fez;
TBM_FLOAT normal[3], e0[3], e1[3], e2[3];
// This is the fastest branch on Sun
// move everything so that the boxcenter is in (0,0,0)
SUB (v0, triVert0, boxcenter);
SUB (v1, triVert1, boxcenter);
SUB (v2, triVert2, boxcenter);
// compute triangle edges
SUB (e0, v1, v0); // tri edge 0
SUB (e1, v2, v1); // tri edge 1
SUB (e2, v0, v2); // tri edge 2
// Bullet 3:
// test the 9 tests first (this was faster)
fex = (TBM_FLOAT)fabs (e0[X]);
fey = (TBM_FLOAT)fabs (e0[Y]);
fez = (TBM_FLOAT)fabs (e0[Z]);
AXISTEST_X01 (e0[Z], e0[Y], fez, fey);
AXISTEST_Y02 (e0[Z], e0[X], fez, fex);
AXISTEST_Z12 (e0[Y], e0[X], fey, fex);
fex = (TBM_FLOAT)fabs (e1[X]);
fey = (TBM_FLOAT)fabs (e1[Y]);
fez = (TBM_FLOAT)fabs (e1[Z]);
AXISTEST_X01 (e1[Z], e1[Y], fez, fey);
AXISTEST_Y02 (e1[Z], e1[X], fez, fex);
AXISTEST_Z0 (e1[Y], e1[X], fey, fex);
fex = (TBM_FLOAT)fabs (e2[X]);
fey = (TBM_FLOAT)fabs (e2[Y]);
fez = (TBM_FLOAT)fabs (e2[Z]);
AXISTEST_X2 (e2[Z], e2[Y], fez, fey);
AXISTEST_Y1 (e2[Z], e2[X], fez, fex);
AXISTEST_Z12 (e2[Y], e2[X], fey, fex);
// Bullet 1:
// first test overlap in the {x,y,z}-directions
// find min, max of the triangle each direction, and test for overlap in
// that direction -- this is equivalent to testing a minimal AABB around
// the triangle against the AABB
// test in X-direction
FINDMINMAX (v0[X], v1[X], v2[X], min, max);
if (min > boxhalfsize[X] || max < -boxhalfsize[X])
{
return FALSE;
}
// test in Y-direction
FINDMINMAX (v0[Y], v1[Y], v2[Y], min, max);
if (min > boxhalfsize[Y] || max < -boxhalfsize[Y])
{
return FALSE;
}
// test in Z-direction
FINDMINMAX (v0[Z], v1[Z], v2[Z], min, max);
if (min > boxhalfsize[Z] || max < -boxhalfsize[Z])
{
return FALSE;
}
// Bullet 2:
// test if the box intersects the plane of the triangle
// compute plane equation of triangle: normal*x+d=0
CROSS (normal, e0, e1);
d = -DOT (normal, v0); // plane eq: normal.x+d=0
return AtiPlaneBoxOverlap (normal, d, boxhalfsize);
}
static bool fast_tri_box_overlap(const Vector3& boxcenter,const Vector3 boxhalfsize,const Vector3 *triverts) {
/* use separating axis theorem to test overlap between triangle and box */
/* need to test for overlap in these directions: */
/* 1) the {x,y,z}-directions (actually, since we use the AABB of the triangle */
/* we do not even need to test these) */
/* 2) normal of the triangle */
/* 3) crossproduct(edge from tri, {x,y,z}-directin) */
/* this gives 3x3=9 more tests */
Vector3 v0,v1,v2;
float min,max,d,p0,p1,p2,rad,fex,fey,fez;
Vector3 normal,e0,e1,e2;
/* This is the fastest branch on Sun */
/* move everything so that the boxcenter is in (0,0,0) */
v0=triverts[0]-boxcenter;
v1=triverts[1]-boxcenter;
v2=triverts[2]-boxcenter;
/* compute triangle edges */
e0=v1-v0; /* tri edge 0 */
e1=v2-v1; /* tri edge 1 */
e2=v0-v2; /* tri edge 2 */
/* Bullet 3: */
/* test the 9 tests first (this was faster) */
fex = Math::abs(e0.x);
fey = Math::abs(e0.y);
fez = Math::abs(e0.z);
AXISTEST_X01(e0.z, e0.y, fez, fey);
AXISTEST_Y02(e0.z, e0.x, fez, fex);
AXISTEST_Z12(e0.y, e0.x, fey, fex);
fex = Math::abs(e1.x);
fey = Math::abs(e1.y);
fez = Math::abs(e1.z);
AXISTEST_X01(e1.z, e1.y, fez, fey);
AXISTEST_Y02(e1.z, e1.x, fez, fex);
AXISTEST_Z0(e1.y, e1.x, fey, fex);
fex = Math::abs(e2.x);
fey = Math::abs(e2.y);
fez = Math::abs(e2.z);
AXISTEST_X2(e2.z, e2.y, fez, fey);
AXISTEST_Y1(e2.z, e2.x, fez, fex);
AXISTEST_Z12(e2.y, e2.x, fey, fex);
/* Bullet 1: */
/* first test overlap in the {x,y,z}-directions */
/* find min, max of the triangle each direction, and test for overlap in */
/* that direction -- this is equivalent to testing a minimal AABB around */
/* the triangle against the AABB */
/* test in X-direction */
FINDMINMAX(v0.x,v1.x,v2.x,min,max);
if(min>boxhalfsize.x || max<-boxhalfsize.x) return false;
/* test in Y-direction */
FINDMINMAX(v0.y,v1.y,v2.y,min,max);
if(min>boxhalfsize.y || max<-boxhalfsize.y) return false;
/* test in Z-direction */
FINDMINMAX(v0.z,v1.z,v2.z,min,max);
if(min>boxhalfsize.z || max<-boxhalfsize.z) return false;
/* Bullet 2: */
/* test if the box intersects the plane of the triangle */
/* compute plane equation of triangle: normal*x+d=0 */
normal=e0.cross(e1);
d=-normal.dot(v0); /* plane eq: normal.x+d=0 */
if(!planeBoxOverlap(normal,d,boxhalfsize)) return false;
return true; /* box and triangle overlaps */
}
inline bool tri_box_overlap(const Aabb& aabb,
const glm::vec3& triv0, const glm::vec3& triv1, const glm::vec3& triv2)
{
/* use separating axis theorem to test overlap between triangle and box */
/* need to test for overlap in these directions: */
/* 1) the {x, y, z}-directions (actually, since we use the AABB of the triangle */
/* we do not even need to test these) */
/* 2) normal of the triangle */
/* 3) crossproduct(edge from tri, {x, y, z}-directin) */
/* this gives 3x3=9 more tests */
/* move everything so that the boxcenter is in (0,0,0) */
glm::vec3 v0, v1, v2;
v0 = triv0 - aabb.center;
v1 = triv1 - aabb.center;
v2 = triv2 - aabb.center;
/* compute triangle edges */
glm::vec3 e0, e1, e2;
e0 = v1 - v0;
e1 = v2 - v1;
e2 = v0 - v2;
float min, max, p0, p1, p2, rad;
/* Bullet 3: */
/* test the 9 tests first (this was faster) */
{
float fex = glm::abs<float>(e0.x);
float fey = glm::abs<float>(e0.y);
float fez = glm::abs<float>(e0.z);
AXISTEST_X01(e0.z, e0.y, fez, fey);
AXISTEST_Y02(e0.z, e0.x, fez, fex);
AXISTEST_Z12(e0.y, e0.x, fey, fex);
}
{
float fex = glm::abs<float>(e1.x);
float fey = glm::abs<float>(e1.y);
float fez = glm::abs<float>(e1.z);
AXISTEST_X01(e1.z, e1.y, fez, fey);
AXISTEST_Y02(e1.z, e1.x, fez, fex);
AXISTEST_Z0(e1.y, e1.x, fey, fex);
}
{
float fex = glm::abs<float>(e2.x);
float fey = glm::abs<float>(e2.y);
float fez = glm::abs<float>(e2.z);
AXISTEST_X2(e2.z, e2.y, fez, fey);
AXISTEST_Y1(e2.z, e2.x, fez, fex);
AXISTEST_Z12(e2.y, e2.x, fey, fex);
}
/* Bullet 1: */
/* first test overlap in the {x, y, z}-directions */
/* find min, max of the triangle each direction, and test for overlap in */
/* that direction -- this is equivalent to testing a minimal AABB around */
/* the triangle against the AABB */
/* test in X-direction */
detail::find_min_max(v0.x, v1.x, v2.x, min, max);
if (min>aabb.half.x || max<-aabb.half.x)
return false;
/* test in Y-direction */
detail::find_min_max(v0.y, v1.y, v2.y, min, max);
if (min>aabb.half.y || max<-aabb.half.y)
return false;
/* test in Z-direction */
detail::find_min_max(v0.z, v1.z, v2.z, min, max);
if (min>aabb.half.z || max<-aabb.half.z)
return false;
/* Bullet 2: */
/* test if the box intersects the plane of the triangle */
/* compute plane equation of triangle: normal*x+d=0 */
glm::vec3 normal = glm::cross(e0, e1);
return detail::plane_box_overlap(normal, v0, aabb.half);
}
/* by Tomas Akenine-Möller */
bool BoundingBox::containsTriangle( const Vec& tv0, const Vec& tv1, const Vec& tv2 ) const
{
Vec boxcenter(center);
Vec boxhalfsize(xExtent, yExtent, zExtent);
int X = 0, Y = 1, Z = 2;
/* use separating axis theorem to test overlap between triangle and box */
/* need to test for overlap in these directions: */
/* 1) the {x,y,z}-directions (actually, since we use the AABB of the triangle */
/* we do not even need to test these) */
/* 2) normal of the triangle */
/* 3) crossproduct(edge from tri, {x,y,z}-directin) */
/* this gives 3x3=9 more tests */
Vec v0,v1,v2;
double min,max,p0,p1,p2,rad,fex,fey,fez;
Vec normal,e0,e1,e2;
/* This is the fastest branch on Sun */
/* move everything so that the box center is in (0,0,0) */
v0=tv0-boxcenter;
v1=tv1-boxcenter;
v2=tv2-boxcenter;
/* compute triangle edges */
e0=v1-v0; /* tri edge 0 */
e1=v2-v1; /* tri edge 1 */
e2=v0-v2; /* tri edge 2 */
/* Bullet 3: */
/* test the 9 tests first (this was faster) */
fex = fabsf(e0[X]);
fey = fabsf(e0[Y]);
fez = fabsf(e0[Z]);
AXISTEST_X01(e0[Z], e0[Y], fez, fey);
AXISTEST_Y02(e0[Z], e0[X], fez, fex);
AXISTEST_Z12(e0[Y], e0[X], fey, fex);
fex = fabsf(e1[X]);
fey = fabsf(e1[Y]);
fez = fabsf(e1[Z]);
AXISTEST_X01(e1[Z], e1[Y], fez, fey);
AXISTEST_Y02(e1[Z], e1[X], fez, fex);
AXISTEST_Z0(e1[Y], e1[X], fey, fex);
fex = fabsf(e2[X]);
fey = fabsf(e2[Y]);
fez = fabsf(e2[Z]);
AXISTEST_X2(e2[Z], e2[Y], fez, fey);
AXISTEST_Y1(e2[Z], e2[X], fez, fex);
AXISTEST_Z12(e2[Y], e2[X], fey, fex);
/* Bullet 1: */
/* first test overlap in the {x,y,z}-directions */
/* find min, max of the triangle each direction, and test for overlap in */
/* that direction -- this is equivalent to testing a minimal AABB around */
/* the triangle against the AABB */
/* test in X-direction */
FINDMINMAX(v0[X],v1[X],v2[X],min,max);
if(min>boxhalfsize[X] || max<-boxhalfsize[X]) return 0;
/* test in Y-direction */
FINDMINMAX(v0[Y],v1[Y],v2[Y],min,max);
if(min>boxhalfsize[Y] || max<-boxhalfsize[Y]) return 0;
/* test in Z-direction */
FINDMINMAX(v0[Z],v1[Z],v2[Z],min,max);
if(min>boxhalfsize[Z] || max<-boxhalfsize[Z]) return 0;
/* Bullet 2: */
/* test if the box intersects the plane of the triangle */
/* compute plane equation of triangle: normal*x+d=0 */
normal = e0 ^ e1;
if(!planeBoxOverlap(normal,v0,boxhalfsize)) return 0;
return 1; /* box and triangle overlaps */
}
int IsTriangleIntersectBox(float boxcenter[3], float boxhalf[3], float triverts[3][3])
{
/* use separating axis theorem to test overlap between triangle and box */
/* need to test for overlap in these directions: */
/* 1) the {x,y,z}-directions (actually, since we use the AABB of the triangle */
/* we do not even need to test these) */
/* 2) normal of the triangle */
/* 3) crossproduct(edge from tri, {x,y,z}-directin) */
/* this gives 3x3=9 more tests */
float v0[3],v1[3],v2[3];
float min,max,d,p0,p1,p2,rad,fex,fey,fez;
float normal[3],e0[3],e1[3],e2[3];
/* 1) first test overlap in the {x,y,z}-directions */
/* find min, max of the triangle each direction, and test for overlap in */
/* that direction -- this is equivalent to testing a minimal AABB around */
/* the triangle against the AABB */
/* test in X */
v0[X]=triverts[0][X]-boxcenter[X];
v1[X]=triverts[1][X]-boxcenter[X];
v2[X]=triverts[2][X]-boxcenter[X];
FINDMINMAX(v0[X],v1[X],v2[X],min,max);
if(min>boxhalf[X] || max<-boxhalf[X]) return 0;
/* test in Y */
v0[Y]=triverts[0][Y]-boxcenter[Y];
v1[Y]=triverts[1][Y]-boxcenter[Y];
v2[Y]=triverts[2][Y]-boxcenter[Y];
FINDMINMAX(v0[Y],v1[Y],v2[Y],min,max);
if(min>boxhalf[Y] || max<-boxhalf[Y]) return 0;
/* test in Z */
v0[Z]=triverts[0][Z]-boxcenter[Z];
v1[Z]=triverts[1][Z]-boxcenter[Z];
v2[Z]=triverts[2][Z]-boxcenter[Z];
FINDMINMAX(v0[Z],v1[Z],v2[Z],min,max);
if(min>boxhalf[Z] || max<-boxhalf[Z]) return 0;
/* 2) */
/* test if the box intersects the plane of the triangle */
/* compute plane equation of triangle: normal*x+d=0 */
SUB(e0,v1,v0); /* tri edge 0 */
SUB(e1,v2,v1); /* tri edge 1 */
CROSS(normal,e0,e1);
d=-DOT(normal,v0); /* plane eq: normal.x+d=0 */
if(!planeBoxOverlap(normal,d,boxhalf)) return 0;
/* compute the last triangle edge */
SUB(e2,v0,v2);
/* 3) */
fex = fabsf(e0[X]);
fey = fabsf(e0[Y]);
fez = fabsf(e0[Z]);
AXISTEST_X01(e0[Z], e0[Y], fez, fey);
AXISTEST_Y02(e0[Z], e0[X], fez, fex);
AXISTEST_Z12(e0[Y], e0[X], fey, fex);
fex = fabsf(e1[X]);
fey = fabsf(e1[Y]);
fez = fabsf(e1[Z]);
AXISTEST_X01(e1[Z], e1[Y], fez, fey);
AXISTEST_Y02(e1[Z], e1[X], fez, fex);
AXISTEST_Z0(e1[Y], e1[X], fey, fex);
fex = fabsf(e2[X]);
fey = fabsf(e2[Y]);
fez = fabsf(e2[Z]);
AXISTEST_X2(e2[Z], e2[Y], fez, fey);
AXISTEST_Y1(e2[Z], e2[X], fez, fex);
AXISTEST_Z12(e2[Y], e2[X], fey, fex);
return 1;
}
int IntersectionTests::triBoxOverlap(float boxhalfsize[3],float v0[3], float v1[3],float v2[3])
{
/* use separating axis theorem to test overlap between triangle and box */
/* need to test for overlap in these directions: */
/* 1) the {x,y,z}-directions (actually, since we use the AABB of the triangle */
/* we do not even need to test these) */
/* 2) normal of the triangle */
/* 3) crossproduct(edge from tri, {x,y,z}-directin) */
/* this gives 3x3=9 more tests */
//double v0[3],v1[3],v2[3];
// double axis[3];
float min,max,d,p0,p1,p2,rad,fex,fey,fez;
float normal[3],e0[3],e1[3],e2[3];
/* This is the fastest branch on Sun */
/* move everything so that the boxcenter is in (0,0,0) */
// SUB(v0,trivertsA,boxcenter);
// SUB(v1,trivertsB,boxcenter);
// SUB(v2,trivertsC,boxcenter);
/* compute triangle edges */
//e0[0] = v1[0] - v0[0]; e0[1] = v1[1] - v0[1]; e0[2] = v1[2] - v0[2];
//e1[0] = v2[0] - v1[0]; e1[1] = v2[1] - v1[1]; e1[2] = v2[2] - v1[2];
//e2[0] = v0[0] - v2[0]; e2[1] = v0[1] - v2[1]; e2[2] = v0[2] - v2[2];
SUB(e0,v1,v0); /* tri edge 0 */
SUB(e1,v2,v1); /* tri edge 1 */
SUB(e2,v0,v2); /* tri edge 2 */
/* Bullet 3: */
/* test the 9 tests first (this was faster) */
fex = e0[X];//fabs(e0[X]);
fey = e0[Y];//fabs(e0[Y]);
fez = e0[Z];//fabs(e0[Z]);
if(e0[X] < 0)
fex = -e0[X];
if(e0[Y] < 0)
fey = -e0[Y];
if(e0[Z] < 0)
fez = -e0[Z];
AXISTEST_X01(e0[Z], e0[Y], fez, fey);
AXISTEST_Y02(e0[Z], e0[X], fez, fex);
AXISTEST_Z12(e0[Y], e0[X], fey, fex);
fex = e1[X];//fabs(e1[X]);
fey = e1[Y];//fabs(e1[Y]);
fez = e1[Z];//fabs(e1[Z]);
if(e1[X] < 0)
fex = -e1[X];
if(e1[Y] < 0)
fey = -e1[Y];
if(e1[Z] < 0)
fez = -e1[Z];
AXISTEST_X01(e1[Z], e1[Y], fez, fey);
AXISTEST_Y02(e1[Z], e1[X], fez, fex);
AXISTEST_Z0(e1[Y], e1[X], fey, fex);
fex = e2[X];//fabs(e2[X]);
fey = e2[Y];//fabs(e2[Y]);
fez = e2[Z];//fabs(e2[Z]);
if(e2[X] < 0)
fex = -e2[X];
if(e2[Y] < 0)
fey = -e2[Y];
if(e2[Z] < 0)
fez = -e2[Z];
AXISTEST_X2(e2[Z], e2[Y], fez, fey);
AXISTEST_Y1(e2[Z], e2[X], fez, fex);
AXISTEST_Z12(e2[Y], e2[X], fey, fex);
/* Bullet 1: */
/* first test overlap in the {x,y,z}-directions */
/* find min, max of the triangle each direction, and test for overlap in */
/* that direction -- this is equivalent to testing a minimal AABB around */
/* the triangle against the AABB */
/* test in X-direction */
FINDMINMAX(v0[X],v1[X],v2[X],min,max);
if(min>boxhalfsize[X] || max<-boxhalfsize[X]) return 0;
/* test in Y-direction */
FINDMINMAX(v0[Y],v1[Y],v2[Y],min,max);
if(min>boxhalfsize[Y] || max<-boxhalfsize[Y]) return 0;
/* test in Z-direction */
FINDMINMAX(v0[Z],v1[Z],v2[Z],min,max);
if(min>boxhalfsize[Z] || max<-boxhalfsize[Z]) return 0;
/* Bullet 2: */
/* test if the box intersects the plane of the triangle */
/* compute plane equation of triangle: normal*x+d=0 */
CROSS(normal,e0,e1);
d=-DOT(normal,v0); /* plane eq: normal.x+d=0 */
if(!planeBoxOverlap(normal,d,boxhalfsize)) return 0;
return 1; /* box and triangle overlaps */
}
// Use separating axis theorem to test overlap between triangle and box
// need to test for overlap in these directions:
// 1) the {x,y,z}-directions (actually, since we use the AABB of the triangle
// we do not even need to test these)
// 2) normal of the triangle
// 3) crossproduct(edge from tri, {x,y,z}-directin)
// this gives 3x3=9 more tests
bool overlapTriangleBox(Vec3r& boxcenter,
Vec3r& boxhalfsize,
Vec3r triverts[3]) {
Vec3r v0, v1, v2, normal, e0, e1, e2;
real min, max, d, p0, p1, p2, rad, fex, fey, fez;
// This is the fastest branch on Sun
// move everything so that the boxcenter is in (0, 0, 0)
v0 = triverts[0] - boxcenter;
v1 = triverts[1] - boxcenter;
v2 = triverts[2] - boxcenter;
// compute triangle edges
e0 = v1 - v0;
e1 = v2 - v1;
e2 = v0 - v2;
// Bullet 3:
// Do the 9 tests first (this was faster)
fex = fabs(e0[X]);
fey = fabs(e0[Y]);
fez = fabs(e0[Z]);
AXISTEST_X01(e0[Z], e0[Y], fez, fey);
AXISTEST_Y02(e0[Z], e0[X], fez, fex);
AXISTEST_Z12(e0[Y], e0[X], fey, fex);
fex = fabs(e1[X]);
fey = fabs(e1[Y]);
fez = fabs(e1[Z]);
AXISTEST_X01(e1[Z], e1[Y], fez, fey);
AXISTEST_Y02(e1[Z], e1[X], fez, fex);
AXISTEST_Z0(e1[Y], e1[X], fey, fex);
fex = fabs(e2[X]);
fey = fabs(e2[Y]);
fez = fabs(e2[Z]);
AXISTEST_X2(e2[Z], e2[Y], fez, fey);
AXISTEST_Y1(e2[Z], e2[X], fez, fex);
AXISTEST_Z12(e2[Y], e2[X], fey, fex);
// Bullet 1:
// first test overlap in the {x,y,z}-directions
// find min, max of the triangle each direction, and test for overlap in
// that direction -- this is equivalent to testing a minimal AABB around
// the triangle against the AABB
// test in X-direction
FINDMINMAX(v0[X], v1[X], v2[X], min, max);
if (min > boxhalfsize[X] || max < -boxhalfsize[X])
return false;
// test in Y-direction
FINDMINMAX(v0[Y], v1[Y], v2[Y], min, max);
if (min > boxhalfsize[Y] || max < -boxhalfsize[Y])
return false;
// test in Z-direction
FINDMINMAX(v0[Z], v1[Z], v2[Z], min, max);
if(min > boxhalfsize[Z] || max < -boxhalfsize[Z])
return false;
// Bullet 2:
// test if the box intersects the plane of the triangle
// compute plane equation of triangle: normal * x + d = 0
normal = e0 ^ e1;
d = -(normal * v0); // plane eq: normal.x + d = 0
if (!overlapPlaneBox(normal, d, boxhalfsize))
return false;
return true; // box and triangle overlaps
}