static ACPI_STATUS
AcpiPsGetAmlOpcode (
ACPI_WALK_STATE *WalkState)
{
ACPI_FUNCTION_TRACE_PTR (PsGetAmlOpcode, WalkState);
WalkState->AmlOffset = (UINT32) ACPI_PTR_DIFF (WalkState->ParserState.Aml,
WalkState->ParserState.AmlStart);
WalkState->Opcode = AcpiPsPeekOpcode (&(WalkState->ParserState));
/*
* First cut to determine what we have found:
* 1) A valid AML opcode
* 2) A name string
* 3) An unknown/invalid opcode
*/
WalkState->OpInfo = AcpiPsGetOpcodeInfo (WalkState->Opcode);
switch (WalkState->OpInfo->Class)
{
case AML_CLASS_ASCII:
case AML_CLASS_PREFIX:
/*
* Starts with a valid prefix or ASCII char, this is a name
* string. Convert the bare name string to a namepath.
*/
WalkState->Opcode = AML_INT_NAMEPATH_OP;
WalkState->ArgTypes = ARGP_NAMESTRING;
break;
case AML_CLASS_UNKNOWN:
/* The opcode is unrecognized. Just skip unknown opcodes */
ACPI_ERROR ((AE_INFO,
"Found unknown opcode 0x%X at AML address %p offset 0x%X, ignoring",
WalkState->Opcode, WalkState->ParserState.Aml, WalkState->AmlOffset));
ACPI_DUMP_BUFFER (WalkState->ParserState.Aml, 128);
/* Assume one-byte bad opcode */
WalkState->ParserState.Aml++;
return_ACPI_STATUS (AE_CTRL_PARSE_CONTINUE);
default:
/* Found opcode info, this is a normal opcode */
WalkState->ParserState.Aml += AcpiPsGetOpcodeSize (WalkState->Opcode);
WalkState->ArgTypes = WalkState->OpInfo->ParseArgs;
break;
}
return_ACPI_STATUS (AE_OK);
}
static ACPI_STATUS
AcpiPsGetAmlOpcode (
ACPI_WALK_STATE *WalkState)
{
ACPI_FUNCTION_TRACE_PTR (PsGetAmlOpcode, WalkState);
WalkState->AmlOffset = (UINT32) ACPI_PTR_DIFF (WalkState->ParserState.Aml,
WalkState->ParserState.AmlStart);
WalkState->Opcode = AcpiPsPeekOpcode (&(WalkState->ParserState));
/*
* First cut to determine what we have found:
* 1) A valid AML opcode
* 2) A name string
* 3) An unknown/invalid opcode
*/
WalkState->OpInfo = AcpiPsGetOpcodeInfo (WalkState->Opcode);
switch (WalkState->OpInfo->Class)
{
case AML_CLASS_ASCII:
case AML_CLASS_PREFIX:
/*
* Starts with a valid prefix or ASCII char, this is a name
* string. Convert the bare name string to a namepath.
*/
WalkState->Opcode = AML_INT_NAMEPATH_OP;
WalkState->ArgTypes = ARGP_NAMESTRING;
break;
case AML_CLASS_UNKNOWN:
/* The opcode is unrecognized. Complain and skip unknown opcodes */
if (WalkState->PassNumber == 2)
{
ACPI_ERROR ((AE_INFO,
"Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
WalkState->Opcode,
(UINT32) (WalkState->AmlOffset + sizeof (ACPI_TABLE_HEADER))));
ACPI_DUMP_BUFFER ((WalkState->ParserState.Aml - 16), 48);
#ifdef ACPI_ASL_COMPILER
/*
* This is executed for the disassembler only. Output goes
* to the disassembled ASL output file.
*/
AcpiOsPrintf (
"/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
WalkState->Opcode,
(UINT32) (WalkState->AmlOffset + sizeof (ACPI_TABLE_HEADER)));
/* Dump the context surrounding the invalid opcode */
AcpiUtDumpBuffer (((UINT8 *) WalkState->ParserState.Aml - 16),
48, DB_BYTE_DISPLAY,
(WalkState->AmlOffset + sizeof (ACPI_TABLE_HEADER) - 16));
AcpiOsPrintf (" */\n");
#endif
}
/* Increment past one-byte or two-byte opcode */
WalkState->ParserState.Aml++;
if (WalkState->Opcode > 0xFF) /* Can only happen if first byte is 0x5B */
{
WalkState->ParserState.Aml++;
}
return_ACPI_STATUS (AE_CTRL_PARSE_CONTINUE);
default:
/* Found opcode info, this is a normal opcode */
WalkState->ParserState.Aml += AcpiPsGetOpcodeSize (WalkState->Opcode);
WalkState->ArgTypes = WalkState->OpInfo->ParseArgs;
break;
}
return_ACPI_STATUS (AE_OK);
}
ACPI_STATUS
AcpiPsParseLoop (
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status = AE_OK;
ACPI_PARSE_OBJECT *Op = NULL; /* current op */
const ACPI_OPCODE_INFO *OpInfo;
ACPI_PARSE_OBJECT *Arg = NULL;
ACPI_PARSE2_OBJECT *DeferredOp;
UINT32 ArgCount; /* push for fixed or var args */
UINT32 ArgTypes = 0;
UINT32 AmlOffset;
UINT16 Opcode;
ACPI_PARSE_OBJECT PreOp;
ACPI_PARSE_STATE *ParserState;
UINT8 *AmlOpStart;
FUNCTION_TRACE_PTR ("PsParseLoop", WalkState);
ParserState = WalkState->ParserState;
#ifndef PARSER_ONLY
if (WalkState->WalkType & WALK_METHOD_RESTART)
{
/* We are restarting a preempted control method */
if (AcpiPsHasCompletedScope (ParserState))
{
/*
* We must check if a predicate to an IF or WHILE statement
* was just completed
*/
if ((ParserState->Scope->ParseScope.Op) &&
((ParserState->Scope->ParseScope.Op->Opcode == AML_IF_OP) ||
(ParserState->Scope->ParseScope.Op->Opcode == AML_WHILE_OP)) &&
(WalkState->ControlState) &&
(WalkState->ControlState->Common.State ==
CONTROL_PREDICATE_EXECUTING))
{
/*
* A predicate was just completed, get the value of the
* predicate and branch based on that value
*/
Status = AcpiDsGetPredicateValue (WalkState, NULL, TRUE);
if (ACPI_FAILURE (Status) &&
((Status & AE_CODE_MASK) != AE_CODE_CONTROL))
{
if (Status == AE_AML_NO_RETURN_VALUE)
{
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Invoked method did not return a value, %s\n",
AcpiFormatException (Status)));
}
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "GetPredicate Failed, %s\n",
AcpiFormatException (Status)));
return_ACPI_STATUS (Status);
}
Status = AcpiPsNextParseState (WalkState, Op, Status);
}
AcpiPsPopScope (ParserState, &Op, &ArgTypes, &ArgCount);
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", Op));
}
else if (WalkState->PrevOp)
{
/* We were in the middle of an op */
Op = WalkState->PrevOp;
ArgTypes = WalkState->PrevArgTypes;
}
}
#endif
/*
* Iterative parsing loop, while there is more aml to process:
*/
while ((ParserState->Aml < ParserState->AmlEnd) || (Op))
{
if (!Op)
{
/* Get the next opcode from the AML stream */
AmlOpStart = ParserState->Aml;
AmlOffset = ParserState->Aml - ParserState->AmlStart;
Opcode = AcpiPsPeekOpcode (ParserState);
/*
* First cut to determine what we have found:
* 1) A valid AML opcode
* 2) A name string
* 3) An unknown/invalid opcode
*/
OpInfo = AcpiPsGetOpcodeInfo (Opcode);
switch (ACPI_GET_OP_TYPE (OpInfo))
{
case ACPI_OP_TYPE_OPCODE:
/* Found opcode info, this is a normal opcode */
ParserState->Aml += AcpiPsGetOpcodeSize (Opcode);
ArgTypes = OpInfo->ParseArgs;
break;
case ACPI_OP_TYPE_ASCII:
case ACPI_OP_TYPE_PREFIX:
/*
* Starts with a valid prefix or ASCII char, this is a name
* string. Convert the bare name string to a namepath.
*/
Opcode = AML_INT_NAMEPATH_OP;
ArgTypes = ARGP_NAMESTRING;
break;
case ACPI_OP_TYPE_UNKNOWN:
/* The opcode is unrecognized. Just skip unknown opcodes */
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Found unknown opcode %lX at AML offset %X, ignoring\n",
Opcode, AmlOffset));
DUMP_BUFFER (ParserState->Aml, 128);
/* Assume one-byte bad opcode */
ParserState->Aml++;
continue;
}
/* Create Op structure and append to parent's argument list */
if (OpInfo->Flags & AML_NAMED)
{
PreOp.Value.Arg = NULL;
PreOp.Opcode = Opcode;
while (GET_CURRENT_ARG_TYPE (ArgTypes) != ARGP_NAME)
{
Arg = AcpiPsGetNextArg (ParserState,
GET_CURRENT_ARG_TYPE (ArgTypes),
&ArgCount);
AcpiPsAppendArg (&PreOp, Arg);
INCREMENT_ARG_LIST (ArgTypes);
}
/* We know that this arg is a name, move to next arg */
INCREMENT_ARG_LIST (ArgTypes);
if (WalkState->DescendingCallback != NULL)
{
/*
* Find the object. This will either insert the object into
* the namespace or simply look it up
*/
Status = WalkState->DescendingCallback (Opcode, NULL, WalkState, &Op);
if (Op == NULL)
{
continue;
}
Status = AcpiPsNextParseState (WalkState, Op, Status);
if (Status == AE_CTRL_PENDING)
{
Status = AE_OK;
goto CloseThisOp;
}
if (ACPI_FAILURE (Status))
{
goto CloseThisOp;
}
}
AcpiPsAppendArg (Op, PreOp.Value.Arg);
AcpiGbl_Depth++;
if (Op->Opcode == AML_REGION_OP)
{
DeferredOp = (ACPI_PARSE2_OBJECT *) Op;
/*
* Defer final parsing of an OperationRegion body,
* because we don't have enough info in the first pass
* to parse it correctly (i.e., there may be method
* calls within the TermArg elements of the body.
*
* However, we must continue parsing because
* the opregion is not a standalone package --
* we don't know where the end is at this point.
*
* (Length is unknown until parse of the body complete)
*/
DeferredOp->Data = AmlOpStart;
DeferredOp->Length = 0;
}
}
else
{
/* Not a named opcode, just allocate Op and append to parent */
OpInfo = AcpiPsGetOpcodeInfo (Opcode);
Op = AcpiPsAllocOp (Opcode);
if (!Op)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
if (OpInfo->Flags & AML_CREATE)
{
/*
* Backup to beginning of CreateXXXfield declaration
* BodyLength is unknown until we parse the body
*/
DeferredOp = (ACPI_PARSE2_OBJECT *) Op;
DeferredOp->Data = AmlOpStart;
DeferredOp->Length = 0;
}
AcpiPsAppendArg (AcpiPsGetParentScope (ParserState), Op);
if ((WalkState->DescendingCallback != NULL))
{
/*
* Find the object. This will either insert the object into
* the namespace or simply look it up
*/
Status = WalkState->DescendingCallback (Opcode, Op, WalkState, &Op);
Status = AcpiPsNextParseState (WalkState, Op, Status);
if (Status == AE_CTRL_PENDING)
{
Status = AE_OK;
goto CloseThisOp;
}
if (ACPI_FAILURE (Status))
{
goto CloseThisOp;
}
}
}
Op->AmlOffset = AmlOffset;
if (OpInfo)
{
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
"Op=%p Opcode=%4.4lX Aml %p Oft=%5.5lX\n",
Op, Op->Opcode, ParserState->Aml, Op->AmlOffset));
}
}
/* Start ArgCount at zero because we don't know if there are any args yet */
ArgCount = 0;
if (ArgTypes) /* Are there any arguments that must be processed? */
{
/* get arguments */
switch (Op->Opcode)
{
case AML_BYTE_OP: /* AML_BYTEDATA_ARG */
case AML_WORD_OP: /* AML_WORDDATA_ARG */
case AML_DWORD_OP: /* AML_DWORDATA_ARG */
case AML_QWORD_OP: /* AML_QWORDATA_ARG */
case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */
/* fill in constant or string argument directly */
AcpiPsGetNextSimpleArg (ParserState,
GET_CURRENT_ARG_TYPE (ArgTypes), Op);
break;
case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */
AcpiPsGetNextNamepath (ParserState, Op, &ArgCount, 1);
ArgTypes = 0;
break;
default:
/* Op is not a constant or string, append each argument */
while (GET_CURRENT_ARG_TYPE (ArgTypes) && !ArgCount)
{
AmlOffset = ParserState->Aml - ParserState->AmlStart;
Arg = AcpiPsGetNextArg (ParserState,
GET_CURRENT_ARG_TYPE (ArgTypes),
&ArgCount);
if (Arg)
{
Arg->AmlOffset = AmlOffset;
AcpiPsAppendArg (Op, Arg);
}
INCREMENT_ARG_LIST (ArgTypes);
}
/* For a method, save the length and address of the body */
if (Op->Opcode == AML_METHOD_OP)
{
DeferredOp = (ACPI_PARSE2_OBJECT *) Op;
/*
* Skip parsing of control method or opregion body,
* because we don't have enough info in the first pass
* to parse them correctly.
*/
DeferredOp->Data = ParserState->Aml;
DeferredOp->Length = (UINT32) (ParserState->PkgEnd -
ParserState->Aml);
/*
* Skip body of method. For OpRegions, we must continue
* parsing because the opregion is not a standalone
* package (We don't know where the end is).
*/
ParserState->Aml = ParserState->PkgEnd;
ArgCount = 0;
}
break;
}
}
/*
* Zero ArgCount means that all arguments for this op have been processed
*/
if (!ArgCount)
{
/* completed Op, prepare for next */
OpInfo = AcpiPsGetOpcodeInfo (Op->Opcode);
if (OpInfo->Flags & AML_NAMED)
{
if (AcpiGbl_Depth)
{
AcpiGbl_Depth--;
}
if (Op->Opcode == AML_REGION_OP)
{
DeferredOp = (ACPI_PARSE2_OBJECT *) Op;
/*
* Skip parsing of control method or opregion body,
* because we don't have enough info in the first pass
* to parse them correctly.
*
* Completed parsing an OpRegion declaration, we now
* know the length.
*/
DeferredOp->Length = (UINT32) (ParserState->Aml -
DeferredOp->Data);
}
}
if (OpInfo->Flags & AML_CREATE)
{
/*
* Backup to beginning of CreateXXXfield declaration (1 for
* Opcode)
*
* BodyLength is unknown until we parse the body
*/
DeferredOp = (ACPI_PARSE2_OBJECT *) Op;
DeferredOp->Length = (UINT32) (ParserState->Aml -
DeferredOp->Data);
}
/* This op complete, notify the dispatcher */
if (WalkState->AscendingCallback != NULL)
{
Status = WalkState->AscendingCallback (WalkState, Op);
Status = AcpiPsNextParseState (WalkState, Op, Status);
if (Status == AE_CTRL_PENDING)
{
Status = AE_OK;
goto CloseThisOp;
}
}
CloseThisOp:
/*
* Finished one argument of the containing scope
*/
ParserState->Scope->ParseScope.ArgCount--;
/* Close this Op (may result in parse subtree deletion) */
if (AcpiPsCompleteThisOp (WalkState, Op))
{
Op = NULL;
}
switch (Status)
{
case AE_OK:
break;
case AE_CTRL_TRANSFER:
/*
* We are about to transfer to a called method.
*/
WalkState->PrevOp = Op;
WalkState->PrevArgTypes = ArgTypes;
return_ACPI_STATUS (Status);
break;
case AE_CTRL_END:
AcpiPsPopScope (ParserState, &Op, &ArgTypes, &ArgCount);
Status = WalkState->AscendingCallback (WalkState, Op);
Status = AcpiPsNextParseState (WalkState, Op, Status);
AcpiPsCompleteThisOp (WalkState, Op);
Op = NULL;
Status = AE_OK;
break;
case AE_CTRL_TERMINATE:
Status = AE_OK;
/* Clean up */
do
{
if (Op)
{
AcpiPsCompleteThisOp (WalkState, Op);
}
AcpiPsPopScope (ParserState, &Op, &ArgTypes, &ArgCount);
} while (Op);
return_ACPI_STATUS (Status);
break;
default: /* All other non-AE_OK status */
if (Op == NULL)
{
AcpiPsPopScope (ParserState, &Op, &ArgTypes, &ArgCount);
}
WalkState->PrevOp = Op;
WalkState->PrevArgTypes = ArgTypes;
/*
* TEMP:
*/
return_ACPI_STATUS (Status);
break;
}
/* This scope complete? */
if (AcpiPsHasCompletedScope (ParserState))
{
AcpiPsPopScope (ParserState, &Op, &ArgTypes, &ArgCount);
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", Op));
}
else
{
Op = NULL;
}
}
/* ArgCount is non-zero */
else
{
/* complex argument, push Op and prepare for argument */
AcpiPsPushScope (ParserState, Op, ArgTypes, ArgCount);
Op = NULL;
}
} /* while ParserState->Aml */
/*
* Complete the last Op (if not completed), and clear the scope stack.
* It is easily possible to end an AML "package" with an unbounded number
* of open scopes (such as when several AML blocks are closed with
* sequential closing braces). We want to terminate each one cleanly.
*/
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Package complete at Op %p\n", Op));
do
{
if (Op)
{
if (WalkState->AscendingCallback != NULL)
{
Status = WalkState->AscendingCallback (WalkState, Op);
Status = AcpiPsNextParseState (WalkState, Op, Status);
if (Status == AE_CTRL_PENDING)
{
Status = AE_OK;
goto CloseThisOp;
}
if (Status == AE_CTRL_TERMINATE)
{
Status = AE_OK;
/* Clean up */
do
{
if (Op)
{
AcpiPsCompleteThisOp (WalkState, Op);
}
AcpiPsPopScope (ParserState, &Op, &ArgTypes, &ArgCount);
} while (Op);
return_ACPI_STATUS (Status);
}
else if (ACPI_FAILURE (Status))
{
AcpiPsCompleteThisOp (WalkState, Op);
return_ACPI_STATUS (Status);
}
}
AcpiPsCompleteThisOp (WalkState, Op);
}
AcpiPsPopScope (ParserState, &Op, &ArgTypes, &ArgCount);
} while (Op);
return_ACPI_STATUS (Status);
}
