static void __init com90xx_probe(void)
{
	int count, status, ioaddr, numprint, airq, openparen = 0;
	unsigned long airqmask;
	int ports[(0x3f0 - 0x200) / 16 + 1] =
	{0};
	unsigned long *shmems;
	void __iomem **iomem;
	int numports, numshmems, *port;
	u_long *p;
	int index;

	if (!io && !irq && !shmem && !*device && com90xx_skip_probe)
		return;

	shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long),
			 GFP_KERNEL);
	if (!shmems)
		return;
	iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *),
			 GFP_KERNEL);
	if (!iomem) {
		kfree(shmems);
		return;
	}

	BUGLVL(D_NORMAL) printk(VERSION);

	
	numports = numshmems = 0;
	if (io)
		ports[numports++] = io;
	else
		for (count = 0x200; count <= 0x3f0; count += 16)
			ports[numports++] = count;
	if (shmem)
		shmems[numshmems++] = shmem;
	else
		for (count = 0xA0000; count <= 0xFF800; count += 2048)
			shmems[numshmems++] = count;

	numprint = -1;
	for (port = &ports[0]; port - ports < numports; port++) {
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S1: ");
		}
		BUGMSG2(D_INIT, "%Xh ", *port);

		ioaddr = *port;

		if (!request_region(*port, ARCNET_TOTAL_SIZE, "arcnet (90xx)")) {
			BUGMSG2(D_INIT_REASONS, "(request_region)\n");
			BUGMSG2(D_INIT_REASONS, "S1: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			*port-- = ports[--numports];
			continue;
		}
		if (ASTATUS() == 0xFF) {
			BUGMSG2(D_INIT_REASONS, "(empty)\n");
			BUGMSG2(D_INIT_REASONS, "S1: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			release_region(*port, ARCNET_TOTAL_SIZE);
			*port-- = ports[--numports];
			continue;
		}
		inb(_RESET);	

		BUGMSG2(D_INIT_REASONS, "\n");
		BUGMSG2(D_INIT_REASONS, "S1: ");
		BUGLVL(D_INIT_REASONS) numprint = 0;
	}
	BUGMSG2(D_INIT, "\n");

	if (!numports) {
		BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n");
		kfree(shmems);
		kfree(iomem);
		return;
	}
	numprint = -1;
	for (port = &ports[0]; port < ports + numports; port++) {
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S2: ");
		}
		BUGMSG2(D_INIT, "%Xh ", *port);
	}
	BUGMSG2(D_INIT, "\n");
	mdelay(RESETtime);

	numprint = -1;
	for (index = 0, p = &shmems[0]; index < numshmems; p++, index++) {
		void __iomem *base;

		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S3: ");
		}
		BUGMSG2(D_INIT, "%lXh ", *p);

		if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) {
			BUGMSG2(D_INIT_REASONS, "(request_mem_region)\n");
			BUGMSG2(D_INIT_REASONS, "Stage 3: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			goto out;
		}
		base = ioremap(*p, MIRROR_SIZE);
		if (!base) {
			BUGMSG2(D_INIT_REASONS, "(ioremap)\n");
			BUGMSG2(D_INIT_REASONS, "Stage 3: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			goto out1;
		}
		if (readb(base) != TESTvalue) {
			BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
				readb(base), TESTvalue);
			BUGMSG2(D_INIT_REASONS, "S3: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			goto out2;
		}
		writeb(0x42, base);
		if (readb(base) != 0x42) {
			BUGMSG2(D_INIT_REASONS, "(read only)\n");
			BUGMSG2(D_INIT_REASONS, "S3: ");
			goto out2;
		}
		BUGMSG2(D_INIT_REASONS, "\n");
		BUGMSG2(D_INIT_REASONS, "S3: ");
		BUGLVL(D_INIT_REASONS) numprint = 0;
		iomem[index] = base;
		continue;
	out2:
		iounmap(base);
	out1:
		release_mem_region(*p, MIRROR_SIZE);
	out:
		*p-- = shmems[--numshmems];
		index--;
	}
	BUGMSG2(D_INIT, "\n");

	if (!numshmems) {
		BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n");
		for (port = &ports[0]; port < ports + numports; port++)
			release_region(*port, ARCNET_TOTAL_SIZE);
		kfree(shmems);
		kfree(iomem);
		return;
	}
	numprint = -1;
	for (p = &shmems[0]; p < shmems + numshmems; p++) {
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S4: ");
		}
		BUGMSG2(D_INIT, "%lXh ", *p);
	}
	BUGMSG2(D_INIT, "\n");

	numprint = -1;
	for (port = &ports[0]; port < ports + numports; port++) {
		int found = 0;
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S5: ");
		}
		BUGMSG2(D_INIT, "%Xh ", *port);

		ioaddr = *port;
		status = ASTATUS();

		if ((status & 0x9D)
		    != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
			BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status);
			BUGMSG2(D_INIT_REASONS, "S5: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			release_region(*port, ARCNET_TOTAL_SIZE);
			*port-- = ports[--numports];
			continue;
		}
		ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
		status = ASTATUS();
		if (status & RESETflag) {
			BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
				status);
			BUGMSG2(D_INIT_REASONS, "S5: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			release_region(*port, ARCNET_TOTAL_SIZE);
			*port-- = ports[--numports];
			continue;
		}
		if (!irq) {
			airqmask = probe_irq_on();
			AINTMASK(NORXflag);
			udelay(1);
			AINTMASK(0);
			airq = probe_irq_off(airqmask);

			if (airq <= 0) {
				BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq);
				BUGMSG2(D_INIT_REASONS, "S5: ");
				BUGLVL(D_INIT_REASONS) numprint = 0;
				release_region(*port, ARCNET_TOTAL_SIZE);
				*port-- = ports[--numports];
				continue;
			}
		} else {
			airq = irq;
		}

		BUGMSG2(D_INIT, "(%d,", airq);
		openparen = 1;

#ifdef FAST_PROBE
		if (numports > 1 || numshmems > 1) {
			inb(_RESET);
			mdelay(RESETtime);
		} else {
			
			writeb(TESTvalue, iomem[0]);
		}
#else
		inb(_RESET);
		mdelay(RESETtime);
#endif

		for (index = 0; index < numshmems; index++) {
			u_long ptr = shmems[index];
			void __iomem *base = iomem[index];

			if (readb(base) == TESTvalue) {	
				BUGMSG2(D_INIT, "%lXh)\n", *p);
				openparen = 0;

				
				if (com90xx_found(*port, airq, ptr, base) == 0)
					found = 1;
				numprint = -1;

				
				shmems[index] = shmems[--numshmems];
				iomem[index] = iomem[numshmems];
				break;	
			} else {
				BUGMSG2(D_INIT_REASONS, "%Xh-", readb(base));
			}
		}

		if (openparen) {
			BUGLVL(D_INIT) printk("no matching shmem)\n");
			BUGLVL(D_INIT_REASONS) printk("S5: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
		}
		if (!found)
			release_region(*port, ARCNET_TOTAL_SIZE);
		*port-- = ports[--numports];
	}

	BUGLVL(D_INIT_REASONS) printk("\n");

	
	for (index = 0; index < numshmems; index++) {
		writeb(TESTvalue, iomem[index]);
		iounmap(iomem[index]);
		release_mem_region(shmems[index], MIRROR_SIZE);
	}
	kfree(shmems);
	kfree(iomem);
}
static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *p)
{
	struct net_device *dev = NULL;
	struct arcnet_local *lp;
	u_long first_mirror, last_mirror;
	int mirror_size;

	
	dev = alloc_arcdev(device);
	if (!dev) {
		BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n");
		iounmap(p);
		release_mem_region(shmem, MIRROR_SIZE);
		return -ENOMEM;
	}
	lp = netdev_priv(dev);
	

	mirror_size = MIRROR_SIZE;
	if (readb(p) == TESTvalue &&
	    check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
	    check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
		mirror_size = 2 * MIRROR_SIZE;

	first_mirror = shmem - mirror_size;
	while (check_mirror(first_mirror, mirror_size) == 1)
		first_mirror -= mirror_size;
	first_mirror += mirror_size;

	last_mirror = shmem + mirror_size;
	while (check_mirror(last_mirror, mirror_size) == 1)
		last_mirror += mirror_size;
	last_mirror -= mirror_size;

	dev->mem_start = first_mirror;
	dev->mem_end = last_mirror + MIRROR_SIZE - 1;

	iounmap(p);
	release_mem_region(shmem, MIRROR_SIZE);

	if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)"))
		goto err_free_dev;

	
	if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) {
		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq);
		goto err_release_mem;
	}
	dev->irq = airq;

	
	lp->card_name = "COM90xx";
	lp->hw.command = com90xx_command;
	lp->hw.status = com90xx_status;
	lp->hw.intmask = com90xx_setmask;
	lp->hw.reset = com90xx_reset;
	lp->hw.owner = THIS_MODULE;
	lp->hw.copy_to_card = com90xx_copy_to_card;
	lp->hw.copy_from_card = com90xx_copy_from_card;
	lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1);
	if (!lp->mem_start) {
		BUGMSG(D_NORMAL, "Can't remap device memory!\n");
		goto err_free_irq;
	}

	
	dev->dev_addr[0] = readb(lp->mem_start + 1);

	dev->base_addr = ioaddr;

	BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, "
	       "ShMem %lXh (%ld*%xh).\n",
	       dev->dev_addr[0],
	       dev->base_addr, dev->irq, dev->mem_start,
	 (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);

	if (register_netdev(dev))
		goto err_unmap;

	cards[numcards++] = dev;
	return 0;

err_unmap:
	iounmap(lp->mem_start);
err_free_irq:
	free_irq(dev->irq, dev);
err_release_mem:
	release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
err_free_dev:
	free_netdev(dev);
	return -EIO;
}
示例#3
0
/* Set up the struct net_device associated with this card.  Called after
 * probing succeeds.
 */
static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *p)
{
	struct net_device *dev = NULL;
	struct arcnet_local *lp;
	u_long first_mirror, last_mirror;
	int mirror_size;

	/* allocate struct net_device */
	dev = alloc_arcdev(device);
	if (!dev) {
		BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n");
		iounmap(p);
		release_mem_region(shmem, MIRROR_SIZE);
		return -ENOMEM;
	}
	lp = netdev_priv(dev);
	/* find the real shared memory start/end points, including mirrors */

	/* guess the actual size of one "memory mirror" - the number of
	 * bytes between copies of the shared memory.  On most cards, it's
	 * 2k (or there are no mirrors at all) but on some, it's 4k.
	 */
	mirror_size = MIRROR_SIZE;
	if (readb(p) == TESTvalue &&
	    check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
	    check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
		mirror_size = 2 * MIRROR_SIZE;

	first_mirror = shmem - mirror_size;
	while (check_mirror(first_mirror, mirror_size) == 1)
		first_mirror -= mirror_size;
	first_mirror += mirror_size;

	last_mirror = shmem + mirror_size;
	while (check_mirror(last_mirror, mirror_size) == 1)
		last_mirror += mirror_size;
	last_mirror -= mirror_size;

	dev->mem_start = first_mirror;
	dev->mem_end = last_mirror + MIRROR_SIZE - 1;

	iounmap(p);
	release_mem_region(shmem, MIRROR_SIZE);

	if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)"))
		goto err_free_dev;

	/* reserve the irq */
	if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) {
		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq);
		goto err_release_mem;
	}
	dev->irq = airq;

	/* Initialize the rest of the device structure. */
	lp->card_name = "COM90xx";
	lp->hw.command = com90xx_command;
	lp->hw.status = com90xx_status;
	lp->hw.intmask = com90xx_setmask;
	lp->hw.reset = com90xx_reset;
	lp->hw.owner = THIS_MODULE;
	lp->hw.copy_to_card = com90xx_copy_to_card;
	lp->hw.copy_from_card = com90xx_copy_from_card;
	lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1);
	if (!lp->mem_start) {
		BUGMSG(D_NORMAL, "Can't remap device memory!\n");
		goto err_free_irq;
	}

	/* get and check the station ID from offset 1 in shmem */
	dev->dev_addr[0] = readb(lp->mem_start + 1);

	dev->base_addr = ioaddr;

	BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, "
	       "ShMem %lXh (%ld*%xh).\n",
	       dev->dev_addr[0],
	       dev->base_addr, dev->irq, dev->mem_start,
	 (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);

	if (register_netdev(dev))
		goto err_unmap;

	cards[numcards++] = dev;
	return 0;

err_unmap:
	iounmap(lp->mem_start);
err_free_irq:
	free_irq(dev->irq, dev);
err_release_mem:
	release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
err_free_dev:
	free_netdev(dev);
	return -EIO;
}
示例#4
0
static void __init com90xx_probe(void)
{
	int count, status, ioaddr, numprint, airq, openparen = 0;
	unsigned long airqmask;
	int ports[(0x3f0 - 0x200) / 16 + 1] =
	{0};
	unsigned long *shmems;
	void __iomem **iomem;
	int numports, numshmems, *port;
	u_long *p;
	int index;

	if (!io && !irq && !shmem && !*device && com90xx_skip_probe)
		return;

	shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long),
			 GFP_KERNEL);
	if (!shmems)
		return;
	iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *),
			 GFP_KERNEL);
	if (!iomem) {
		kfree(shmems);
		return;
	}

	BUGLVL(D_NORMAL) printk(VERSION);

	/* set up the arrays where we'll store the possible probe addresses */
	numports = numshmems = 0;
	if (io)
		ports[numports++] = io;
	else
		for (count = 0x200; count <= 0x3f0; count += 16)
			ports[numports++] = count;
	if (shmem)
		shmems[numshmems++] = shmem;
	else
		for (count = 0xA0000; count <= 0xFF800; count += 2048)
			shmems[numshmems++] = count;

	/* Stage 1: abandon any reserved ports, or ones with status==0xFF
	 * (empty), and reset any others by reading the reset port.
	 */
	numprint = -1;
	for (port = &ports[0]; port - ports < numports; port++) {
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S1: ");
		}
		BUGMSG2(D_INIT, "%Xh ", *port);

		ioaddr = *port;

		if (!request_region(*port, ARCNET_TOTAL_SIZE, "arcnet (90xx)")) {
			BUGMSG2(D_INIT_REASONS, "(request_region)\n");
			BUGMSG2(D_INIT_REASONS, "S1: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			*port-- = ports[--numports];
			continue;
		}
		if (ASTATUS() == 0xFF) {
			BUGMSG2(D_INIT_REASONS, "(empty)\n");
			BUGMSG2(D_INIT_REASONS, "S1: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			release_region(*port, ARCNET_TOTAL_SIZE);
			*port-- = ports[--numports];
			continue;
		}
		inb(_RESET);	/* begin resetting card */

		BUGMSG2(D_INIT_REASONS, "\n");
		BUGMSG2(D_INIT_REASONS, "S1: ");
		BUGLVL(D_INIT_REASONS) numprint = 0;
	}
	BUGMSG2(D_INIT, "\n");

	if (!numports) {
		BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n");
		kfree(shmems);
		kfree(iomem);
		return;
	}
	/* Stage 2: we have now reset any possible ARCnet cards, so we can't
	 * do anything until they finish.  If D_INIT, print the list of
	 * cards that are left.
	 */
	numprint = -1;
	for (port = &ports[0]; port < ports + numports; port++) {
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S2: ");
		}
		BUGMSG2(D_INIT, "%Xh ", *port);
	}
	BUGMSG2(D_INIT, "\n");
	mdelay(RESETtime);

	/* Stage 3: abandon any shmem addresses that don't have the signature
	 * 0xD1 byte in the right place, or are read-only.
	 */
	numprint = -1;
	for (index = 0, p = &shmems[0]; index < numshmems; p++, index++) {
		void __iomem *base;

		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S3: ");
		}
		BUGMSG2(D_INIT, "%lXh ", *p);

		if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) {
			BUGMSG2(D_INIT_REASONS, "(request_mem_region)\n");
			BUGMSG2(D_INIT_REASONS, "Stage 3: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			goto out;
		}
		base = ioremap(*p, MIRROR_SIZE);
		if (!base) {
			BUGMSG2(D_INIT_REASONS, "(ioremap)\n");
			BUGMSG2(D_INIT_REASONS, "Stage 3: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			goto out1;
		}
		if (readb(base) != TESTvalue) {
			BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
				readb(base), TESTvalue);
			BUGMSG2(D_INIT_REASONS, "S3: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			goto out2;
		}
		/* By writing 0x42 to the TESTvalue location, we also make
		 * sure no "mirror" shmem areas show up - if they occur
		 * in another pass through this loop, they will be discarded
		 * because *cptr != TESTvalue.
		 */
		writeb(0x42, base);
		if (readb(base) != 0x42) {
			BUGMSG2(D_INIT_REASONS, "(read only)\n");
			BUGMSG2(D_INIT_REASONS, "S3: ");
			goto out2;
		}
		BUGMSG2(D_INIT_REASONS, "\n");
		BUGMSG2(D_INIT_REASONS, "S3: ");
		BUGLVL(D_INIT_REASONS) numprint = 0;
		iomem[index] = base;
		continue;
	out2:
		iounmap(base);
	out1:
		release_mem_region(*p, MIRROR_SIZE);
	out:
		*p-- = shmems[--numshmems];
		index--;
	}
	BUGMSG2(D_INIT, "\n");

	if (!numshmems) {
		BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n");
		for (port = &ports[0]; port < ports + numports; port++)
			release_region(*port, ARCNET_TOTAL_SIZE);
		kfree(shmems);
		kfree(iomem);
		return;
	}
	/* Stage 4: something of a dummy, to report the shmems that are
	 * still possible after stage 3.
	 */
	numprint = -1;
	for (p = &shmems[0]; p < shmems + numshmems; p++) {
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S4: ");
		}
		BUGMSG2(D_INIT, "%lXh ", *p);
	}
	BUGMSG2(D_INIT, "\n");

	/* Stage 5: for any ports that have the correct status, can disable
	 * the RESET flag, and (if no irq is given) generate an autoirq,
	 * register an ARCnet device.
	 *
	 * Currently, we can only register one device per probe, so quit
	 * after the first one is found.
	 */
	numprint = -1;
	for (port = &ports[0]; port < ports + numports; port++) {
		int found = 0;
		numprint++;
		numprint %= 8;
		if (!numprint) {
			BUGMSG2(D_INIT, "\n");
			BUGMSG2(D_INIT, "S5: ");
		}
		BUGMSG2(D_INIT, "%Xh ", *port);

		ioaddr = *port;
		status = ASTATUS();

		if ((status & 0x9D)
		    != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
			BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status);
			BUGMSG2(D_INIT_REASONS, "S5: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			release_region(*port, ARCNET_TOTAL_SIZE);
			*port-- = ports[--numports];
			continue;
		}
		ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
		status = ASTATUS();
		if (status & RESETflag) {
			BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
				status);
			BUGMSG2(D_INIT_REASONS, "S5: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
			release_region(*port, ARCNET_TOTAL_SIZE);
			*port-- = ports[--numports];
			continue;
		}
		/* skip this completely if an IRQ was given, because maybe
		 * we're on a machine that locks during autoirq!
		 */
		if (!irq) {
			/* if we do this, we're sure to get an IRQ since the
			 * card has just reset and the NORXflag is on until
			 * we tell it to start receiving.
			 */
			airqmask = probe_irq_on();
			AINTMASK(NORXflag);
			udelay(1);
			AINTMASK(0);
			airq = probe_irq_off(airqmask);

			if (airq <= 0) {
				BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq);
				BUGMSG2(D_INIT_REASONS, "S5: ");
				BUGLVL(D_INIT_REASONS) numprint = 0;
				release_region(*port, ARCNET_TOTAL_SIZE);
				*port-- = ports[--numports];
				continue;
			}
		} else {
			airq = irq;
		}

		BUGMSG2(D_INIT, "(%d,", airq);
		openparen = 1;

		/* Everything seems okay.  But which shmem, if any, puts
		 * back its signature byte when the card is reset?
		 *
		 * If there are multiple cards installed, there might be
		 * multiple shmems still in the list.
		 */
#ifdef FAST_PROBE
		if (numports > 1 || numshmems > 1) {
			inb(_RESET);
			mdelay(RESETtime);
		} else {
			/* just one shmem and port, assume they match */
			writeb(TESTvalue, iomem[0]);
		}
#else
		inb(_RESET);
		mdelay(RESETtime);
#endif

		for (index = 0; index < numshmems; index++) {
			u_long ptr = shmems[index];
			void __iomem *base = iomem[index];

			if (readb(base) == TESTvalue) {	/* found one */
				BUGMSG2(D_INIT, "%lXh)\n", *p);
				openparen = 0;

				/* register the card */
				if (com90xx_found(*port, airq, ptr, base) == 0)
					found = 1;
				numprint = -1;

				/* remove shmem from the list */
				shmems[index] = shmems[--numshmems];
				iomem[index] = iomem[numshmems];
				break;	/* go to the next I/O port */
			} else {
				BUGMSG2(D_INIT_REASONS, "%Xh-", readb(base));
			}
		}

		if (openparen) {
			BUGLVL(D_INIT) printk("no matching shmem)\n");
			BUGLVL(D_INIT_REASONS) printk("S5: ");
			BUGLVL(D_INIT_REASONS) numprint = 0;
		}
		if (!found)
			release_region(*port, ARCNET_TOTAL_SIZE);
		*port-- = ports[--numports];
	}

	BUGLVL(D_INIT_REASONS) printk("\n");

	/* Now put back TESTvalue on all leftover shmems. */
	for (index = 0; index < numshmems; index++) {
		writeb(TESTvalue, iomem[index]);
		iounmap(iomem[index]);
		release_mem_region(shmems[index], MIRROR_SIZE);
	}
	kfree(shmems);
	kfree(iomem);
}
示例#5
0
文件: com90xx.c 项目: nhanh0/hah
/* Set up the struct net_device associated with this card.  Called after
 * probing succeeds.
 */
static int __init com90xx_found(struct net_device *dev0, int ioaddr, int airq,
                                u_long shmem)
{
    struct net_device *dev = dev0;
    struct arcnet_local *lp;
    u_long first_mirror, last_mirror;
    int mirror_size, err;

    /* allocate struct net_device if we don't have one yet */
    if (!dev && !(dev = dev_alloc("arc%d", &err))) {
        BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n");
        return err;
    }
    lp = dev->priv = kmalloc(sizeof(struct arcnet_local), GFP_KERNEL);
    if (!lp) {
        BUGMSG(D_NORMAL, "Can't allocate device data!\n");
        goto err_free_dev;
    }
    /* find the real shared memory start/end points, including mirrors */

    /* guess the actual size of one "memory mirror" - the number of
     * bytes between copies of the shared memory.  On most cards, it's
     * 2k (or there are no mirrors at all) but on some, it's 4k.
     */
    mirror_size = MIRROR_SIZE;
    if (isa_readb(shmem) == TESTvalue
            && isa_readb(shmem - mirror_size) != TESTvalue
            && isa_readb(shmem - 2 * mirror_size) == TESTvalue)
        mirror_size *= 2;

    first_mirror = last_mirror = shmem;
    while (isa_readb(first_mirror) == TESTvalue)
        first_mirror -= mirror_size;
    first_mirror += mirror_size;

    while (isa_readb(last_mirror) == TESTvalue)
        last_mirror += mirror_size;
    last_mirror -= mirror_size;

    dev->mem_start = first_mirror;
    dev->mem_end = last_mirror + MIRROR_SIZE - 1;
    dev->rmem_start = dev->mem_start + BUFFER_SIZE * 0;
    dev->rmem_end = dev->mem_start + BUFFER_SIZE * 2 - 1;

    /* Initialize the rest of the device structure. */
    memset(lp, 0, sizeof(struct arcnet_local));
    lp->card_name = "COM90xx";
    lp->hw.command = com90xx_command;
    lp->hw.status = com90xx_status;
    lp->hw.intmask = com90xx_setmask;
    lp->hw.reset = com90xx_reset;
    lp->hw.open_close = com90xx_openclose;
    lp->hw.copy_to_card = com90xx_copy_to_card;
    lp->hw.copy_from_card = com90xx_copy_from_card;
    lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1);
    if (!lp->mem_start) {
        BUGMSG(D_NORMAL, "Can't remap device memory!\n");
        goto err_free_dev_priv;
    }
    /* Fill in the fields of the device structure with generic values. */
    arcdev_setup(dev);

    /* get and check the station ID from offset 1 in shmem */
    dev->dev_addr[0] = readb(lp->mem_start + 1);

    /* reserve the irq */
    if (request_irq(airq, &arcnet_interrupt, 0, "arcnet (90xx)", dev)) {
        BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq);
        goto err_unmap;
    }
    dev->irq = airq;

    /* reserve the I/O and memory regions - guaranteed to work by check_region */
    request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (90xx)");
    request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)");
    dev->base_addr = ioaddr;

    BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, "
           "ShMem %lXh (%ld*%xh).\n",
           dev->dev_addr[0],
           dev->base_addr, dev->irq, dev->mem_start,
           (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);

    if (!dev0 && register_netdev(dev))
        goto err_release;

    cards[numcards++] = dev;
    return 0;

err_release:
    free_irq(dev->irq, dev);
    release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
    release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
err_unmap:
    iounmap(lp->mem_start);
err_free_dev_priv:
    kfree(dev->priv);
err_free_dev:
    if (!dev0)
        kfree(dev);
    return -EIO;
}
示例#6
0
文件: com90xx.c 项目: nhanh0/hah
int __init com90xx_probe(struct net_device *dev)
{
    int count, status, ioaddr, numprint, airq, retval = -ENODEV,
                                               openparen = 0;
    unsigned long airqmask;
    int ports[(0x3f0 - 0x200) / 16 + 1] =
    {0};
    u_long shmems[(0xFF800 - 0xA0000) / 2048 + 1] =
    {0};
    int numports, numshmems, *port;
    u_long *shmem;

    if (!dev && com90xx_skip_probe)
        return -ENODEV;

#ifndef MODULE
    arcnet_init();
#endif

    BUGLVL(D_NORMAL) printk(VERSION);

    /* set up the arrays where we'll store the possible probe addresses */
    numports = numshmems = 0;
    if (dev && dev->base_addr)
        ports[numports++] = dev->base_addr;
    else
        for (count = 0x200; count <= 0x3f0; count += 16)
            ports[numports++] = count;
    if (dev && dev->mem_start)
        shmems[numshmems++] = dev->mem_start;
    else
        for (count = 0xA0000; count <= 0xFF800; count += 2048)
            shmems[numshmems++] = count;

    /* Stage 1: abandon any reserved ports, or ones with status==0xFF
     * (empty), and reset any others by reading the reset port.
     */
    numprint = -1;
    for (port = &ports[0]; port - ports < numports; port++) {
        numprint++;
        numprint %= 8;
        if (!numprint) {
            BUGMSG2(D_INIT, "\n");
            BUGMSG2(D_INIT, "S1: ");
        }
        BUGMSG2(D_INIT, "%Xh ", *port);

        ioaddr = *port;

        if (check_region(*port, ARCNET_TOTAL_SIZE)) {
            BUGMSG2(D_INIT_REASONS, "(check_region)\n");
            BUGMSG2(D_INIT_REASONS, "S1: ");
            BUGLVL(D_INIT_REASONS) numprint = 0;
            *port = ports[numports - 1];
            numports--;
            port--;
            continue;
        }
        if (ASTATUS() == 0xFF) {
            BUGMSG2(D_INIT_REASONS, "(empty)\n");
            BUGMSG2(D_INIT_REASONS, "S1: ");
            BUGLVL(D_INIT_REASONS) numprint = 0;
            *port = ports[numports - 1];
            numports--;
            port--;
            continue;
        }
        inb(_RESET);	/* begin resetting card */

        BUGMSG2(D_INIT_REASONS, "\n");
        BUGMSG2(D_INIT_REASONS, "S1: ");
        BUGLVL(D_INIT_REASONS) numprint = 0;
    }
    BUGMSG2(D_INIT, "\n");

    if (!numports) {
        BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n");
        return -ENODEV;
    }
    /* Stage 2: we have now reset any possible ARCnet cards, so we can't
     * do anything until they finish.  If D_INIT, print the list of
     * cards that are left.
     */
    numprint = -1;
    for (port = &ports[0]; port - ports < numports; port++) {
        numprint++;
        numprint %= 8;
        if (!numprint) {
            BUGMSG2(D_INIT, "\n");
            BUGMSG2(D_INIT, "S2: ");
        }
        BUGMSG2(D_INIT, "%Xh ", *port);
    }
    BUGMSG2(D_INIT, "\n");
    mdelay(RESETtime);

    /* Stage 3: abandon any shmem addresses that don't have the signature
     * 0xD1 byte in the right place, or are read-only.
     */
    numprint = -1;
    for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++) {
        u_long ptr = *shmem;

        numprint++;
        numprint %= 8;
        if (!numprint) {
            BUGMSG2(D_INIT, "\n");
            BUGMSG2(D_INIT, "S3: ");
        }
        BUGMSG2(D_INIT, "%lXh ", *shmem);

        if (check_mem_region(*shmem, BUFFER_SIZE)) {
            BUGMSG2(D_INIT_REASONS, "(check_mem_region)\n");
            BUGMSG2(D_INIT_REASONS, "Stage 3: ");
            BUGLVL(D_INIT_REASONS) numprint = 0;
            *shmem = shmems[numshmems - 1];
            numshmems--;
            shmem--;
            continue;
        }
        if (isa_readb(ptr) != TESTvalue) {
            BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
                    isa_readb(ptr), TESTvalue);
            BUGMSG2(D_INIT_REASONS, "S3: ");
            BUGLVL(D_INIT_REASONS) numprint = 0;
            *shmem = shmems[numshmems - 1];
            numshmems--;
            shmem--;
            continue;
        }
        /* By writing 0x42 to the TESTvalue location, we also make
         * sure no "mirror" shmem areas show up - if they occur
         * in another pass through this loop, they will be discarded
         * because *cptr != TESTvalue.
         */
        isa_writeb(0x42, ptr);
        if (isa_readb(ptr) != 0x42) {
            BUGMSG2(D_INIT_REASONS, "(read only)\n");
            BUGMSG2(D_INIT_REASONS, "S3: ");
            *shmem = shmems[numshmems - 1];
            numshmems--;
            shmem--;
            continue;
        }
        BUGMSG2(D_INIT_REASONS, "\n");
        BUGMSG2(D_INIT_REASONS, "S3: ");
        BUGLVL(D_INIT_REASONS) numprint = 0;
    }
    BUGMSG2(D_INIT, "\n");

    if (!numshmems) {
        BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n");
        return -ENODEV;
    }
    /* Stage 4: something of a dummy, to report the shmems that are
     * still possible after stage 3.
     */
    numprint = -1;
    for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++) {
        numprint++;
        numprint %= 8;
        if (!numprint) {
            BUGMSG2(D_INIT, "\n");
            BUGMSG2(D_INIT, "S4: ");
        }
        BUGMSG2(D_INIT, "%lXh ", *shmem);
    }
    BUGMSG2(D_INIT, "\n");

    /* Stage 5: for any ports that have the correct status, can disable
     * the RESET flag, and (if no irq is given) generate an autoirq,
     * register an ARCnet device.
     *
     * Currently, we can only register one device per probe, so quit
     * after the first one is found.
     */
    numprint = -1;
    for (port = &ports[0]; port - ports < numports; port++) {
        numprint++;
        numprint %= 8;
        if (!numprint) {
            BUGMSG2(D_INIT, "\n");
            BUGMSG2(D_INIT, "S5: ");
        }
        BUGMSG2(D_INIT, "%Xh ", *port);

        ioaddr = *port;
        status = ASTATUS();

        if ((status & 0x9D)
                != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
            BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status);
            BUGMSG2(D_INIT_REASONS, "S5: ");
            BUGLVL(D_INIT_REASONS) numprint = 0;
            *port = ports[numports - 1];
            numports--;
            port--;
            continue;
        }
        ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
        status = ASTATUS();
        if (status & RESETflag) {
            BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
                    status);
            BUGMSG2(D_INIT_REASONS, "S5: ");
            BUGLVL(D_INIT_REASONS) numprint = 0;
            *port = ports[numports - 1];
            numports--;
            port--;
            continue;
        }
        /* skip this completely if an IRQ was given, because maybe
         * we're on a machine that locks during autoirq!
         */
        if (!dev || !dev->irq) {
            /* if we do this, we're sure to get an IRQ since the
             * card has just reset and the NORXflag is on until
             * we tell it to start receiving.
             */
            airqmask = probe_irq_on();
            AINTMASK(NORXflag);
            udelay(1);
            AINTMASK(0);
            airq = probe_irq_off(airqmask);

            if (airq <= 0) {
                BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq);
                BUGMSG2(D_INIT_REASONS, "S5: ");
                BUGLVL(D_INIT_REASONS) numprint = 0;
                *port = ports[numports - 1];
                numports--;
                port--;
                continue;
            }
        } else {
            airq = dev->irq;
        }

        BUGMSG2(D_INIT, "(%d,", airq);
        openparen = 1;

        /* Everything seems okay.  But which shmem, if any, puts
         * back its signature byte when the card is reset?
         *
         * If there are multiple cards installed, there might be
         * multiple shmems still in the list.
         */
#ifdef FAST_PROBE
        if (numports > 1 || numshmems > 1) {
            inb(_RESET);
            mdelay(RESETtime);
        } else {
            /* just one shmem and port, assume they match */
            isa_writeb(TESTvalue, shmems[0]);
        }
#else
        inb(_RESET);
        mdelay(RESETtime);
#endif

        for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++) {
            u_long ptr = *shmem;

            if (isa_readb(ptr) == TESTvalue) {	/* found one */
                BUGMSG2(D_INIT, "%lXh)\n", *shmem);
                openparen = 0;

                /* register the card */
                retval = com90xx_found(dev, *port, airq, *shmem);
                numprint = -1;

                /* remove shmem from the list */
                *shmem = shmems[numshmems - 1];
                numshmems--;

                break;	/* go to the next I/O port */
            } else {
                BUGMSG2(D_INIT_REASONS, "%Xh-", isa_readb(ptr));
            }
        }

        if (openparen) {
            BUGLVL(D_INIT) printk("no matching shmem)\n");
            BUGLVL(D_INIT_REASONS) printk("S5: ");
            BUGLVL(D_INIT_REASONS) numprint = 0;
        }
        *port = ports[numports - 1];
        numports--;
        port--;
    }

    BUGLVL(D_INIT_REASONS) printk("\n");

    /* Now put back TESTvalue on all leftover shmems. */
    for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++)
        isa_writeb(TESTvalue, *shmem);

    if (retval && dev && !numcards)
        BUGMSG2(D_NORMAL, "S5: No ARCnet cards found.\n");
    return retval;
}