void user_init(void)
{
uart_init(BIT_RATE_9600, BIT_RATE_9600);
os_install_putc1((void *)uart_putc1);
avr_uart_override_rx_intr ();
os_delay_us(1000000);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
avr_init_task ();
avr_reg_msg_callback(avr_msg_cb);
}
//Main routine. Initialize stdout, the I/O, filesystem and the webserver and we're done.
void user_init(void) {
wifi_station_set_auto_connect(FALSE);
stdoutInit();
CFG_Load();
ioInit();
MAIN_DEBUG("\nInitialise ENC stack, dhcp if requested\n");
stack_init();
/* This DNS is only for the wifi interface, as wired never acts as an 'AP' */
captdnsInit();
// 0x40200000 is the base address for spi flash memory mapping, ESPFS_POS is the position
// where image is written in flash that is defined in Makefile.
#ifdef ESPFS_POS
espFsInit((void*)(0x40200000 + ESPFS_POS));
#else
espFsInit((void*)(webpages_espfs_start));
#endif
httpdInit(builtInUrls, 80);
#ifdef SHOW_HEAP_USE
os_timer_disarm(&prHeapTimer);
os_timer_setfn(&prHeapTimer, prHeapTimerCb, NULL);
os_timer_arm(&prHeapTimer, 3000, 1);
#endif
os_timer_disarm(&websockTimer);
os_timer_setfn(&websockTimer, websockTimerCb, NULL);
os_timer_arm(&websockTimer, 1000, 1);
os_printf("\nReady\n");
}
void CFG_Load(void)
{
filehandle_t* cfgFile ;
cfgFile = FS_OpenFile(CONFIG_FILENAME, "wrt");
FS_UploadToRAM(cfgFile);
if (!cfgFile)
{
Log_Printf("[CFG_Load] Unable to find player settings file, creating it.\n");
CFG_Save();
CFG_Load();
return;
}
//Check the magic number
if(strncmp(cfgFile->filedata, cfgMagicNumber, strlen(cfgMagicNumber)))
{
Log_Printf("[CFG_Load] Magic number check failed.\n");
return;
}
//Reading visited act
FS_CloseFile(cfgFile);
}
LOCAL void ICACHE_FLASH_ATTR initDone_cb() {
CFG_Load();
os_printf("\n%s starting ...\n", sysCfg.deviceName);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass,
sysCfg.mqtt_keepalive, 1);
char temp[100];
os_sprintf(temp, "/Raw/%s/offline", sysCfg.device_id);
MQTT_InitLWT(&mqttClient, temp, "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
os_printf("SDK version is: %s\n", system_get_sdk_version());
os_printf("Smart-Config version is: %s\n", smartconfig_get_version());
system_print_meminfo();
os_printf("Flash size map %d; id %lx\n", system_get_flash_size_map(), spi_flash_get_id());
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, sysCfg.deviceName, wifiConnectCb);
lcdInit();
lightOn();
showString(1, 1, "MQTT Monitor");
}
void user_init(void)
{
system_set_os_print(0);
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
// Initialize the GPIO subsystem.
gpio_init();
//Set GPIO2 to output mode
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_GPIO2);
//Set GPIO2 high
gpio_output_set(ROOMBA_WAKEUP_PIN, 0, ROOMBA_WAKEUP_PIN, 0);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
void ICACHE_FLASH_ATTR
user_init(void) {
pcd8544_settings.lcdVop = PCD8544_CONTRAST;
pcd8544_settings.tempCoeff = 0x04;
pcd8544_settings.biasMode = 0x14;
pcd8544_settings.inverse = false;
// you can change these values to any pin you like and have access to
pcd8544_settings.resetPin = PCD8544_RESET_PIN; //-1; This pin is now optional.
// Set it to negative value to disable.
// If you do disable it, you must tie LCD reset pin to esp reset via resistor.
pcd8544_settings.scePin = PCD8544_SCE_PIN; //-1; This pin is now optional.
// Set it to negative value to disable.
// If you do disable it, you must tie LCD CE pin to GND via resistor.
// dcPin, sdinPin and sclkPin can be used for other SPI devices if scePin is *NOT* disabled.
pcd8544_settings.dcPin = PCD8544_DC_PIN;
pcd8544_settings.sdinPin = PCD8544_SDIN_PIN;
pcd8544_settings.sclkPin = PCD8544_SCLK_PIN;
// Make uart0 work with just the TX pin. Baud:115200,n,8,1
// The RX pin is now free for GPIO use.
stdout_init();
os_delay_us(1000000); // wait a second
PCD8544_init(&pcd8544_settings);
PCD8544_initLCD(&pcd8544_settings);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
os_timer_setfn(&lcd_timer, (os_timer_func_t*) lcdInitTask, NULL);
os_timer_arm(&lcd_timer, user_procTaskPeriod, 0);
INFO("\nSystem started ...\n");
}
//Main routine. Initialize stdout, the I/O and the webserver and we're done.
void user_init(void) {
// HTTPD
stdoutInit();
ioInit();
httpdInit(builtInUrls, 80);
//MQTT
uart_init(115200, 115200);
CFG_Load();
sleepms(1000);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, SEC_NONSSL);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
// MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
INFO("device_ID:%s\r\n",sysCfg.device_id);
INFO("MQTTHOST:%s\r\n",sysCfg.mqtt_host);
//DS18B20 timers
os_timer_disarm(&ds18b20_timer);
os_timer_setfn(&ds18b20_timer, (os_timer_func_t *)ds18b20_cb, (void *)0);
os_timer_arm(&ds18b20_timer, DELAY, 1);
//NTP timers
ntp_get_time();
os_timer_disarm(&NTP_timer);
os_timer_setfn(&NTP_timer, (os_timer_func_t *)ntp_get_time, (void *)0);
os_timer_arm(&NTP_timer, NTPDELAY, 1);
// initialize GPIO2
PIN_FUNC_SELECT(PIN_GPIO2_MUX, PIN_GPIO2_FUNC);
GPIO_OUTPUT_SET(PIN_GPIO2, 0);
INFO("GPIO2 set to OFF\r\n");
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
os_printf("\nReady\n");
}
void user_init(void)
{
//uart_init(BIT_RATE_115200, BIT_RATE_115200);
uart_init(BIT_RATE_9600, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
//MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitConnection(&mqttClient, "user.jdaiot.com", 1883, 0);
//MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitClient(&mqttClient, "g500001", "LASS", "LaSS2015", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
//// modified for LASS
system_os_task(recvTask, recvTaskPrio, recvTaskQueue, recvTaskQueueLen);
tick=0;
refreshTime=10;
// turn off timer
os_timer_disarm(&tmr0);
//
// set the timer call back function
//
os_timer_setfn(&tmr0, tsr0, &mqttClient);
//
// turn timer on to trigger each .5 second
//
os_timer_arm(&tmr0, 5000, 1); //every 5 second
INFO("\r\nSystem started ...\r\n");
}
void ICACHE_FLASH_ATTR u_mqtt_init()
{
CFG_Load();
/*
* Original, old call with SSID and Passwd included.
* WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
*
* NOTE:- Our WiFi-Connect callback calls the MQTT_Connect function,
* which in turn will call the mqttConnectCb() function when
* communications with the MQTT servcer are established.
*/
WIFI_Connect(wifiConnectCb);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
}
void user_init(void)
{
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
void user_init(void)
{
int access_point = 1;
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
if(access_point) {
wifi_set_opmode(STATIONAP_MODE);
} else {
gpio_init();
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_GPIO1);
gpio_output_set(0, 0, (1 << pin), 0);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
}
//Main routine
void ICACHE_FLASH_ATTR user_init(void) {
stdoutInit();
os_delay_us(100000);
CFG_Load();
ioInit();
WIFI_Connect(wifiConnectCb);
httpdInit(builtInUrls, sysCfg.httpd_port);
if(sysCfg.ntp_enable==1) {
sntp_init(sysCfg.ntp_tz); //timezone
}
if(sysCfg.mqtt_enable==1) {
MQTT_InitConnection(&mqttClient, (uint8_t *)sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.mqtt_use_ssl );
MQTT_InitClient(&mqttClient, (uint8_t *)sysCfg.mqtt_devid, (uint8_t *)sysCfg.mqtt_user, (uint8_t *)sysCfg.mqtt_pass, sysCfg.mqtt_keepalive,1);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
}
if(sysCfg.sensor_dht22_enable)
DHTInit(SENSOR_DHT22, 30000);
if(sysCfg.sensor_ds18b20_enable)
ds_init(30000);
broadcastd_init();
thermostat_init(30000);
/*
//Netbios to set the name
struct softap_config wiconfig;
os_memset(netbios_name, ' ', sizeof(netbios_name)-1);
if(wifi_softap_get_config(&wiconfig)) {
int i;
for(i = 0; i < sizeof(netbios_name)-1; i++) {
if(wiconfig.ssid[i] < ' ') break;
netbios_name[i] = wiconfig.ssid[i];
};
}
else os_sprintf(netbios_name, "ESP8266");
netbios_name[sizeof(netbios_name)-1]='\0';
netbios_init();
*/
os_printf("\nRelay Board Ready\n");
os_printf("Free heap size:%d\n",system_get_free_heap_size());
#ifdef CGIPWM_H
//Mind the PWM pin!! defined in pwm.h
duty=0;
pwm_init( 50, &duty);
pwm_set_duty(duty, 0);
pwm_start();
#endif
//OLEDInit();
}
void ICACHE_FLASH_ATTR CFG_init(uint32 delay) {
os_timer_disarm(&delay_timer);
os_timer_setfn(&delay_timer, (os_timer_func_t *) checkLazyWrite, (void *) 0);
os_timer_arm(&delay_timer, delay, true);
CFG_Load();
}
//Main routine. Initialize stdout, the I/O and the webserver and we're done.
void user_init(void) {
// my stuff
dBR_BOILER_SET=65; // default setting 65C boiler temperature on reboot
dBR_TEMP_ROOM_SET=18; // default setting 18C room temperature on reboot
dBR_HUMIDITY_SET=60; // default setting 65% humidity target on reboot
dBR_MODE=2; // default BR MODE is AUTO
dDEVICE_MODE=1; // This mode defines if device uses remote (MQTT) management or uses local logics - 0 for remote, 1 for local mode. DEFAULT is 0 - remote
// HTTPD
stdoutInit();
ioInit();
httpdInit(builtInUrls, 80);
//MQTT
uart_init(115200, 115200);
CFG_Load();
sleepms(1000);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, SEC_NONSSL);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
// MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
INFO("device_ID:%s\r\n",sysCfg.device_id);
INFO("MQTTHOST:%s\r\n",sysCfg.mqtt_host);
//DS18B20 timers
os_timer_disarm(&ds18b20_timer);
os_timer_setfn(&ds18b20_timer, (os_timer_func_t *)ds18b20_cb, (void *)0);
os_timer_arm(&ds18b20_timer, DELAY, 1);
// DHT22 initialize
DHTInit(DHT22, DELAY);
os_timer_disarm(&dht22_timer);
os_timer_setfn(&dht22_timer, (os_timer_func_t *)dht22_cb, (void *)0);
os_timer_arm(&dht22_timer, DELAY, 1);
// INPUT PIN initialize
ETS_GPIO_INTR_DISABLE(); // Disable gpio interrupts
ETS_GPIO_INTR_ATTACH(read_input_pin, 13); // GPIO13 interrupt handler
PIN_FUNC_SELECT(PIN_GPIO13_MUX, PIN_GPIO13_FUNC);
gpio_output_set(0, 0, 0, BIT13); // Set GPIO13 as input
PIN_PULLUP_EN(PIN_GPIO13_MUX); // Enable pullup
GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, BIT(13)); // Clear GPIO12 status
gpio_pin_intr_state_set(GPIO_ID_PIN(13), GPIO_PIN_INTR_NEGEDGE); // Interrupt on NEGATIVE GPIO13 edge
ETS_GPIO_INTR_ENABLE(); // Enable gpio interrupts
// INFO("Input pin INITIALIZED ! ! !");
// initialize GPIO12
PIN_FUNC_SELECT(PIN_GPIO12_MUX, PIN_GPIO12_FUNC);
GPIO_OUTPUT_SET(PIN_GPIO12, 0);
// INFO("GPIO12 set to OFF\r\n");
// initialize GPIO5
GPIO_OUTPUT_SET(PIN_GPIO5, 0);
// INFO("GPIO5 set to OFF\r\n");
// initialize GPIO14
PIN_FUNC_SELECT(PIN_GPIO14_MUX, PIN_GPIO14_FUNC);
GPIO_OUTPUT_SET(PIN_GPIO14, 0);
// INFO("GPIO14 set to OFF\r\n");
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
os_printf("\nReady\n");
}
/****************************************************************************
* MenuLanguageSelect
***************************************************************************/
int MenuLanguageSelect() {
int cnt = 0;
int ret = 0, choice = 0;
int scrollon;
int returnhere = 0;
GuiSound btnSoundOver(button_over_pcm, button_over_pcm_size, Settings.sfxvolume);
// because destroy GuiSound must wait while sound playing is finished, we use a global sound
if(!btnClick2) btnClick2=new GuiSound(button_click2_pcm, button_click2_pcm_size, Settings.sfxvolume);
// GuiSound btnClick(button_click2_pcm, button_click2_pcm_size, Settings.sfxvolume);
char imgPath[100];
snprintf(imgPath, sizeof(imgPath), "%sbutton_dialogue_box.png", CFG.theme_path);
GuiImageData btnOutline(imgPath, button_dialogue_box_png);
snprintf(imgPath, sizeof(imgPath), "%ssettings_background.png", CFG.theme_path);
GuiImageData settingsbg(imgPath, settings_background_png);
GuiTrigger trigA;
trigA.SetSimpleTrigger(-1, WPAD_BUTTON_A | WPAD_CLASSIC_BUTTON_A, PAD_BUTTON_A);
GuiTrigger trigB;
trigB.SetButtonOnlyTrigger(-1, WPAD_BUTTON_B | WPAD_CLASSIC_BUTTON_B, PAD_BUTTON_B);
char fullpath[100];
int countfiles = GetAllDirFiles(Settings.languagefiles_path);
if (!strcmp("", Settings.languagefiles_path)) {
sprintf(fullpath, "%s", tr("Standard"));
} else {
sprintf(fullpath, "%s", Settings.languagefiles_path);
}
GuiText titleTxt(fullpath, 24, (GXColor) {0, 0, 0, 255});
titleTxt.SetAlignment(ALIGN_CENTRE, ALIGN_MIDDLE);
titleTxt.SetPosition(0,0);
GuiButton pathBtn(300, 50);
pathBtn.SetAlignment(ALIGN_CENTRE, ALIGN_TOP);
pathBtn.SetPosition(0,28);
pathBtn.SetLabel(&titleTxt);
pathBtn.SetSoundOver(&btnSoundOver);
pathBtn.SetSoundClick(btnClick2);
pathBtn.SetTrigger(&trigA);
pathBtn.SetEffectGrow();
GuiImage oggmenubackground(&settingsbg);
oggmenubackground.SetAlignment(ALIGN_LEFT, ALIGN_TOP);
oggmenubackground.SetPosition(0, 0);
GuiText backBtnTxt(tr("Back") , 22, THEME.prompttext);
backBtnTxt.SetMaxWidth(btnOutline.GetWidth()-30);
GuiImage backBtnImg(&btnOutline);
if (Settings.wsprompt == yes) {
backBtnTxt.SetWidescreen(CFG.widescreen);
backBtnImg.SetWidescreen(CFG.widescreen);
}
GuiButton backBtn(btnOutline.GetWidth(), btnOutline.GetHeight());
backBtn.SetAlignment(ALIGN_CENTRE, ALIGN_TOP);
backBtn.SetPosition(-190, 400);
backBtn.SetLabel(&backBtnTxt);
backBtn.SetImage(&backBtnImg);
backBtn.SetSoundOver(&btnSoundOver);
backBtn.SetSoundClick(btnClick2);
backBtn.SetTrigger(&trigA);
backBtn.SetTrigger(&trigB);
backBtn.SetEffectGrow();
GuiText defaultBtnTxt(tr("Default") , 22, THEME.prompttext);
defaultBtnTxt.SetMaxWidth(btnOutline.GetWidth()-30);
GuiImage defaultBtnImg(&btnOutline);
if (Settings.wsprompt == yes) {
defaultBtnTxt.SetWidescreen(CFG.widescreen);
defaultBtnImg.SetWidescreen(CFG.widescreen);
}
GuiButton defaultBtn(btnOutline.GetWidth(), btnOutline.GetHeight());
defaultBtn.SetAlignment(ALIGN_CENTRE, ALIGN_TOP);
defaultBtn.SetPosition(190, 400);
defaultBtn.SetLabel(&defaultBtnTxt);
defaultBtn.SetImage(&defaultBtnImg);
defaultBtn.SetSoundOver(&btnSoundOver);
defaultBtn.SetSoundClick(btnClick2);
defaultBtn.SetTrigger(&trigA);
defaultBtn.SetEffectGrow();
GuiText updateBtnTxt(tr("Update Files") , 22, THEME.prompttext);
updateBtnTxt.SetMaxWidth(btnOutline.GetWidth()-30);
GuiImage updateBtnImg(&btnOutline);
if (Settings.wsprompt == yes) {
updateBtnTxt.SetWidescreen(CFG.widescreen);
updateBtnImg.SetWidescreen(CFG.widescreen);
}
GuiButton updateBtn(btnOutline.GetWidth(), btnOutline.GetHeight());
updateBtn.SetAlignment(ALIGN_CENTRE, ALIGN_TOP);
updateBtn.SetPosition(0, 400);
updateBtn.SetLabel(&updateBtnTxt);
updateBtn.SetImage(&updateBtnImg);
updateBtn.SetSoundOver(&btnSoundOver);
updateBtn.SetSoundClick(btnClick2);
updateBtn.SetTrigger(&trigA);
updateBtn.SetEffectGrow();
customOptionList options2(countfiles);
for (cnt = 0; cnt < countfiles; cnt++) {
char filename[64];
strlcpy(filename, GetFileName(cnt), sizeof(filename));
char *dot = strchr(filename, '.');
if (dot) *dot='\0';
options2.SetName(cnt, "%s", filename);
options2.SetValue(cnt, NULL);
}
if (cnt < 9) {
scrollon = 0;
} else {
scrollon = 1;
}
GuiCustomOptionBrowser optionBrowser4(396, 280, &options2, CFG.theme_path, "bg_options_settings.png", bg_options_settings_png, scrollon, 10);
optionBrowser4.SetPosition(0, 90);
optionBrowser4.SetAlignment(ALIGN_CENTRE, ALIGN_TOP);
HaltGui();
GuiWindow w(screenwidth, screenheight);
w.Append(&oggmenubackground);
w.Append(&pathBtn);
w.Append(&backBtn);
w.Append(&defaultBtn);
w.Append(&updateBtn);
w.Append(&optionBrowser4);
mainWindow->Append(&w);
w.SetEffect(EFFECT_FADE, 20);
ResumeGui();
while (w.GetEffect()>0) usleep(50);
while (!returnhere) {
if (shutdown == 1)
Sys_Shutdown();
else if (reset == 1)
Sys_Reboot();
else if (backBtn.GetState() == STATE_CLICKED) {
backBtn.ResetState();
break;
}
else if (defaultBtn.GetState() == STATE_CLICKED) {
choice = WindowPrompt(tr("Loading standard language."),0,tr("OK"), tr("Cancel"));
if (choice == 1) {
sprintf(Settings.language_path, "notset");
cfg_save_global();
gettextCleanUp();
HaltGui();
CFG_Load();
ResumeGui();
returnhere = 2;
}
defaultBtn.ResetState();
//optionBrowser4.SetFocus(1); // commented out to prevent crash
}
else if (updateBtn.GetState() == STATE_CLICKED) {
choice = WindowPrompt(tr("Update all Language Files"),tr("Do you wish to update/download all language files?"),tr("OK"), tr("Cancel"));
if (choice == 1) {
bool network = true;
if (!IsNetworkInit()) {
network = NetworkInitPrompt();
}
if (network) {
const char URL[60] = "http://usbloader-gui.googlecode.com/svn/trunk/Languages/";
char fullURL[300];
FILE *pfile;
URL_List LinkList(URL);
int listsize = LinkList.GetURLCount();
subfoldercreate(Settings.languagefiles_path);
for (int i = 0; i < listsize; i++) {
ShowProgress(tr("Updating Language Files:"), 0, LinkList.GetURL(i), i, listsize-1);
if (strcasecmp(".lang", strrchr(LinkList.GetURL(i), '.')) == 0) {
snprintf(fullURL, sizeof(fullURL), "%s%s", URL, LinkList.GetURL(i));
struct block file = downloadfile(fullURL);
if (file.data && file.size) {
char filepath[300];
snprintf(filepath, sizeof(filepath), "%s%s", Settings.languagefiles_path, LinkList.GetURL(i));
pfile = fopen(filepath, "wb");
fwrite(file.data, 1, file.size, pfile);
fclose(pfile);
}
free(file.data);
}
}
ProgressStop();
returnhere = 1;
break;
}
}
updateBtn.ResetState();
//optionBrowser4.SetFocus(1); // commented out to prevent crash
}
else if (pathBtn.GetState() == STATE_CLICKED) {
w.Remove(&optionBrowser4);
w.Remove(&backBtn);
w.Remove(&pathBtn);
w.Remove(&defaultBtn);
char entered[43] = "";
strlcpy(entered, Settings.languagefiles_path, sizeof(entered));
int result = OnScreenKeyboard(entered,43,0);
w.Append(&optionBrowser4);
w.Append(&pathBtn);
w.Append(&backBtn);
w.Append(&defaultBtn);
if ( result == 1 ) {
int len = (strlen(entered)-1);
if (entered[len] !='/')
strncat (entered, "/", 1);
strlcpy(Settings.languagefiles_path, entered, sizeof(Settings.languagefiles_path));
WindowPrompt(tr("Languagepath changed."),0,tr("OK"));
if (isInserted(bootDevice)) {
cfg_save_global();
returnhere = 1;
break;
} else {
WindowPrompt(tr("No SD-Card inserted!"), tr("Insert an SD-Card to save."), tr("OK"));
}
}
if (countfiles > 0) {
optionBrowser4.SetFocus(1);
}
pathBtn.ResetState();
}
ret = optionBrowser4.GetClickedOption();
if (ret>=0) {
choice = WindowPrompt(tr("Do you want to change language?"), 0, tr("Yes"), tr("Cancel"));
if (choice == 1) {
if (isInserted(bootDevice)) {
snprintf(Settings.language_path, sizeof(Settings.language_path), "%s%s", Settings.languagefiles_path, GetFileName(ret));
cfg_save_global();
if (!checkfile(Settings.language_path)) {
sprintf(Settings.language_path, tr("not set"));
WindowPrompt(tr("File not found."),tr("Loading standard language."),tr("OK"));
}
gettextCleanUp();
HaltGui();
CFG_Load();
ResumeGui();
returnhere = 2;
break;
} else {
WindowPrompt(tr("No SD-Card inserted!"), tr("Insert an SD-Card to save."), tr("OK"), 0,0,0,-1);
}
}
optionBrowser4.SetFocus(1);
}
}
w.SetEffect(EFFECT_FADE, -20);
while (w.GetEffect()>0) usleep(50);
HaltGui();
mainWindow->Remove(&w);
ResumeGui();
return returnhere;
}
int
main(int argc, char *argv[])
{
setlocale(LC_ALL, "en.UTF-8");
geckoinit = InitGecko();
if (hbcStubAvailable() || geckoinit)
{
InitTextVideo();
}
// DEBUG_Init(GDBSTUB_DEVICE_USB, 1);
//_break();
__exception_setreload(5); //auto reset code dump nobody gives us codedump info anyways.
gprintf("\n\n------------------");
gprintf("\nUSB Loader GX rev%s",GetRev());
gprintf("\nmain(%d", argc);
for (int i=0;i<argc;i++)
gprintf(", %s",argv[i]?argv[i]:"<NULL>");
gprintf(")");
// This part is added, because we need a identify patched ios
// printf("\n\tReloading into ios 236");
if (IOS_ReloadIOSsafe(236) < 0)
{
// printf("\n\tIOS 236 not found, reloading into 36");
IOS_ReloadIOSsafe(36);
}
printf("\n\tStarting up");
MEM2_init(36); // Initialize 36 MB
MEM2_takeBigOnes(true);
s32 ret;
bool startupproblem = false;
bool bootDevice_found=false;
if (argc >= 1)
{
if (!strncasecmp(argv[0], "usb:/", 5))
{
strcpy(bootDevice, "USB:");
bootDevice_found = true;
} else if (!strncasecmp(argv[0], "sd:/", 4))
bootDevice_found = true;
}
printf("\n\tInitializing controllers");
/** PAD_Init has to be before InitVideo don't move that **/
PAD_Init(); // initialize PAD/WPAD
printf("\n\tInitialize USB (wake up)");
USBDevice_Init(); // seems enough to wake up some HDDs if they are in sleep mode when the loader starts (tested with WD MyPassport Essential 2.5")
gprintf("\n\tChecking for stub IOS");
ios222rev = getIOSrev(0x00000001000000dell);
ios249rev = getIOSrev(0x00000001000000f9ll);
//if we don't like either of the cIOS then scram
if (!(ios222rev==4 || ios222rev==5 || (ios249rev>=9 && ios249rev<65280)))
{
InitTextVideo();
printf("\x1b[2J");
if ((ios222rev < 0 && ios222rev != WII_EINSTALL) && (ios249rev < 0 && ios249rev != WII_EINSTALL))
{
printf("\n\n\n\tWARNING!");
printf("\n\tUSB Loader GX needs unstubbed cIOS 222 v4 or 249 v9+");
printf("\n\n\tWe cannot determine the versions on your system,\n\tsince you have no patched ios 36 or 236 installed.");
printf("\n\tTherefor, if loading of USB Loader GX fails, you\n\tprobably have installed the 4.2 update,");
printf("\n\tand you should go figure out how to get some cios action going on\n\tin your Wii.");
printf("\n\n\tThis message will show every time.");
sleep(5);
}
else
{
printf("\n\n\n\tERROR!");
printf("\n\tUSB Loader GX needs unstubbed cIOS 222 v4 or 249 v9+");
printf("\n\n\tI found \n\t\t222 = %d%s",ios222rev,ios222rev==65280?" (Stubbed by 4.2 update)":"");
printf("\n\t\t249 = %d%s",ios249rev,ios249rev==65280?" (Stubbed by 4.2 update)":"");
printf("\n\n\tGo figure out how to get some cIOS action going on\n\tin your Wii and come back and see me.");
sleep(15);
printf("\n\n\tBye");
USBDevice_deInit();
exit(0);
}
}
printf("\n\tReloading ios 249...");
ret = IOS_ReloadIOSsafe(249);
printf("%d", ret);
if (ret < 0)
{
printf("\n\tIOS 249 failed, reloading ios 222...");
ret = IOS_ReloadIOSsafe(222);
printf("%d", ret);
if (ret < 0)
{
printf("\n\tIOS 222 failed, reloading ios 250...");
ret = IOS_ReloadIOSsafe(250);
printf("%d", ret);
if(ret < 0)
{
printf("\n\tIOS 250 failed, reloading ios 223...");
ret = IOS_ReloadIOSsafe(223);
printf("%d", ret);
if (ret < 0)
{
printf("\n\tERROR: cIOS could not be loaded!\n");
sleep(5);
SYS_ResetSystem(SYS_RETURNTOMENU, 0, 0);
}
}
}
printf("\n\tInitialize sd card");
SDCard_Init();
printf("\n\tLoad ehc module");
load_ehc_module();
printf("\n\tdeinit sd card");
SDCard_deInit();
}
printf("\n\tInit wbfs...");
ret = WBFS_Init(WBFS_DEVICE_USB);
printf("%d", ret);
if (ret < 0)
{
printf("\n\tYou have issues with a slow disc, or a difficult disc\n\tReloading 222...");
ret = IOS_ReloadIOSsafe(222);
printf("%d", ret);
/*if(ret < 0) {
// printf("\n\tSleeping for 4 seconds");
// sleep(4);
InitVideo(); // Initialise video
Menu_Render();
BootUpProblems();
startupproblem = true;
ret = 1;
}*/
printf("\n\tInitialize sd card");
SDCard_Init();
printf("\n\tLoad ehc module");
load_ehc_module();
printf("\n\tdeinit sd card");
SDCard_deInit();
printf("\n\tInitialize wbfs...");
USBDevice_deInit();
USBDevice_Init();
ret = WBFS_Init(WBFS_DEVICE_USB);
printf("%d", ret);
if(ret < 0)
{
// printf("\n\tSleeping for 4 seconds");
// sleep(4);
InitVideo(); // Initialise video
Menu_Render();
BootUpProblems();
startupproblem = true;
ret = 1;
}
}
printf("\n\tInitialize sd card");
SDCard_Init(); // mount SD for loading cfg's
//this should have already been done by now in order to WBFS_Init().
printf("\n\tInitialize usb device");
USBDevice_Init(); // and mount USB:/
if (!bootDevice_found)
{
printf("\n\tSearch for configuration file");
//try USB
//left in all the dol and elf files in this check in case this is the first time running the app and they dont have the config
if (checkfile((char*) "USB:/config/GXglobal.cfg") || (checkfile((char*) "USB:/apps/usbloader_gx/boot.elf"))
|| checkfile((char*) "USB:/apps/usbloadergx/boot.dol") || (checkfile((char*) "USB:/apps/usbloadergx/boot.elf"))
|| checkfile((char*) "USB:/apps/usbloader_gx/boot.dol"))
strcpy(bootDevice, "USB:");
printf("\n\tConfiguration file is on %s", bootDevice);
}
// Try opening and closing the configuration file here
// to prevent a crash dump later on - giantpune
char GXGlobal_cfg[26];
sprintf(GXGlobal_cfg, "%s/config/GXGlobal.cfg", bootDevice);
FILE *fp = fopen(GXGlobal_cfg, "r");
if (fp)
{
fclose(fp);
}
gettextCleanUp();
printf("\n\tLoading configuration...");
CFG_Load();
printf("done");
// gprintf("\n\tbootDevice = %s",bootDevice);
/* Load Custom IOS */
if ((Settings.cios == ios222 && IOS_GetVersion() != 222) ||
(Settings.cios == ios223 && IOS_GetVersion() != 223))
{
printf("\n\tReloading IOS to config setting (%d)...", Settings.cios == ios222 ? 222 : 223);
SDCard_deInit(); // unmount SD for reloading IOS
USBDevice_deInit(); // unmount USB for reloading IOS
USBStorage2_Deinit();
ret = IOS_ReloadIOSsafe(Settings.cios == ios222 ? 222 : 223);
printf("%d", ret);
SDCard_Init();
load_ehc_module();
if (ret < 0)
{
SDCard_deInit();
Settings.cios = ios249;
ret = IOS_ReloadIOSsafe(249);
// now mount SD:/ //no need to keep mindlessly mounting and unmounting SD card
SDCard_Init();
}
USBDevice_Init(); // and mount USB:/
WBFS_Init(WBFS_DEVICE_USB);
} else if ((Settings.cios == ios249 && IOS_GetVersion() != 249) ||
(Settings.cios == ios250 && IOS_GetVersion() != 250))
{
printf("\n\tReloading IOS to config setting (%d)...", ios249 ? 249 : 250);
SDCard_deInit(); // unmount SD for reloading IOS
USBDevice_deInit(); // unmount USB for reloading IOS
USBStorage2_Deinit();
ret = IOS_ReloadIOSsafe(ios249 ? 249 : 250);
printf("%d", ret);
if (ret < 0)
{
Settings.cios = ios222;
ret = IOS_ReloadIOSsafe(222);
SDCard_Init();
load_ehc_module();
}
else SDCard_Init(); // now mount SD:/ //no need to keep mindlessly mounting and unmounting SD card
USBDevice_Init(); // and mount USB:/
WBFS_Init(WBFS_DEVICE_USB);
}
// Partition_GetList(&partitions);
if (ret < 0)
{
printf("\nERROR: cIOS could not be loaded!");
sleep(5);
exit(0);
//SYS_ResetSystem(SYS_RETURNTOMENU, 0, 0);
}
//gprintf("\n\tcIOS = %u (Rev %u)",IOS_GetVersion(), IOS_GetRevision());//don't need gprintf if sending console shit to gecko, too
printf("\n\tcIOS = %u (Rev %u)",IOS_GetVersion(), IOS_GetRevision());
// printf("Sleeping for 5 seconds\n");
// sleep(5);
//if a ID was passed via args copy it and try to boot it after the partition is mounted
//its not really a headless mode. more like hairless.
if (argc > 1 && argv[1])
{
if (strlen(argv[1])==6)
strncpy(headlessID, argv[1], sizeof(headlessID));
}
//! Init the rest of the System
Sys_Init();
Wpad_Init();
if(!startupproblem)
InitVideo();
InitAudio(); // Initialize audio
WPAD_SetDataFormat(WPAD_CHAN_ALL,WPAD_FMT_BTNS_ACC_IR);
WPAD_SetVRes(WPAD_CHAN_ALL, screenwidth, screenheight);
// load main font from file, or default to built-in font
fontSystem = new FreeTypeGX();
char *fontPath = NULL;
asprintf(&fontPath, "%sfont.ttf", CFG.theme_path);
fontSystem->loadFont(fontPath, font_ttf, font_ttf_size, 0);
fontSystem->setCompatibilityMode(FTGX_COMPATIBILITY_DEFAULT_TEVOP_GX_PASSCLR | FTGX_COMPATIBILITY_DEFAULT_VTXDESC_GX_NONE);
free(fontPath);
fontClock = new FreeTypeGX();
fontClock->loadFont(NULL, clock_ttf, clock_ttf_size, 0);
fontClock->setCompatibilityMode(FTGX_COMPATIBILITY_DEFAULT_TEVOP_GX_PASSCLR | FTGX_COMPATIBILITY_DEFAULT_VTXDESC_GX_NONE);
gprintf("\n\tEnd of Main()");
InitGUIThreads();
MainMenu(MENU_CHECK);
return 0;
}
