static BOOL Intr_EnableGlobalInterrupts(VOID)
{
CSL_Status intStat;
CSL_CPINTC_Handle hnd;
//If already initialized return to caller
if( bIntcInitialized )
{
return TRUE;
}
#ifdef _STE_BOOT
context.numEvtEntries = 12;
context.eventhandlerRecord = EventHandler;
//Enable CSL Intc Module
intStat = CSL_intcInit(&context);
if (intStat != CSL_SOK)
{
#ifdef DEBUG
printf("INTR: Initialization error.\n");
#endif
}
/* Enable NMIs */
intStat = CSL_intcGlobalNmiEnable();
if (intStat != CSL_SOK)
{
#ifdef DEBUG
printf("INTR: Error while enabling NMI.\n");
#endif
}
/* Enable all interrupts */
intStat = CSL_intcGlobalEnable(&state);
if (intStat != CSL_SOK)
{
#ifdef DEBUG
printf("INTR: Error while enabling interrupt.\n");
#endif
}
#endif
//Enable CIC Module
bIntcInitialized = TRUE;
//Initialize the CSL CIC Module
//intStat = CSL_cicInit(&CicContext); //commented by nachi
hnd = CSL_CPINTC_open (0); // Inserted for new chip (Opens CPINTC Instance 0)
if (hnd != CSL_SOK)
{
#ifdef _STE_APP
LOG_TRACE0( "INTR : CIC init error");
#endif
return FALSE;
}
return TRUE;
}
//配置uPP的中断
void upp_intc_setup_my(int (*isr)(void *))
{
//初始化开始
intcContext_uPP.eventhandlerRecord = EventHandler_uPP; //事件句柄记录指针
intcContext_uPP.numEvtEntries = 50; //事件入口数目
CSL_intcInit(&intcContext_uPP); //初始化中断上下文对象变量，返回状态CSL_SOK
// Enable NMIs使能非可屏蔽中断
CSL_intcGlobalNmiEnable();
//Enable global interrupts使能全局中断
CSL_intcGlobalEnable(&intc_state_uPP);
/***************** interrupt configration for UPP接口 **************************/
/* open CPINTC0 to map the UPP completetion ISR event to the host interrupt */
hnd_UPP = CSL_CPINTC_open(0);
if (hnd_UPP == 0)
{
printf ("Error: Unable to open CPINTC-1\n");
return;
}
glbCpintcHnd[2] = (CSL_CPINTC_RegsOvly)hnd_UPP;
//需要根据应用修改UPP产生的事件编号及CPINTC输出channel号
CSL_CPINTC_mapSystemIntrToChannel (hnd_UPP, CSL_INTC0_RPINT, 9);
CSL_CPINTC_enableSysInterrupt (hnd_UPP, CSL_INTC0_RPINT);
CSL_CPINTC_enableHostInterrupt (hnd_UPP, 9);
CSL_CPINTC_enableAllHostInterrupt(hnd_UPP);
vectId_uPP = CSL_INTC_VECTID_4;
hIntcUpp= CSL_intcOpen (&intcObjUpp, CSL_GEM_INTC0_OUT_9_PLUS_20_MUL_N, &vectId_uPP , NULL);
gpioHandler.handler = (CSL_IntcEventHandler)&upp_isr;//事件句柄指针
gpioHandler.arg = 0; //传递给参数的句柄指针
CSL_intcPlugEventHandler(hIntcUpp, &gpioHandler); //建立事件和句柄的映射关系
CSL_intcHwControl(hIntcUpp,CSL_INTC_CMD_EVTCLEAR,NULL);
CSL_intcHwControl(hIntcUpp, CSL_INTC_CMD_EVTENABLE, NULL);
/***************** interrupt configration for UPP接口 **************************/
}
/*
* =============================================================================
* @func IntcInit
*
* @arg
* NONE
*
* @desc
* 初始化中断
*
* @return
* NONE
*
* =============================================================================
*/
void IntcInit()
{
/*初始化开始*/
intcContext_uPP.eventhandlerRecord = EventHandler_uPP; //事件句柄记录指针
intcContext_uPP.numEvtEntries = 50; //事件入口数目
/* 初始化结束,前面的初始化过程只需要一次,如果需要增加中断处理,直接添加中断矢量
和事件号即可,无需再次初始化,否则会覆盖掉前面的配置(包括事件和其中断服务程序的映射表等)*/
/*初始化中断上下文对象变量，返回状态CSL_SOK*/
CSL_intcInit(&intcContext_uPP);
/*使能非可屏蔽中断*/
CSL_intcGlobalNmiEnable();
/*使能全局中断*/
CSL_intcGlobalEnable(&intc_state_uPP);
if(coreNum == 0)
{
/************************ 1.中断配置-----收图 **************************/
///////////////////////////第一步：EDMACC_GINT事件作为system interrupt通过CPINTC映射到host interrupt////////////
/* open CPINTC0 to map the EDMA completetion ISR event to the host interrupt */
hnd_EDMA_uPP = CSL_CPINTC_open(0);
if (hnd_EDMA_uPP == 0)
{
printf ("Error: Unable to open CPINTC-1\n");
return;
}
glbCpintcHnd[1] = (CSL_CPINTC_RegsOvly)hnd_EDMA_uPP;
//需要根据应用修改EDMA产生的事件编号及CPINTC输出channel号
//tms320c6657.pdf中"EDMA产生的事件编号"对应"CIC0 Event Inputs的22号"，System Event Mapping的CIC0_OUT(8+20*n)的"8"为host interrupt
CSL_CPINTC_mapSystemIntrToChannel (hnd_EDMA_uPP, CSL_INTC0_CPU_3_2_EDMACC_GINT, 8);//system interrupt maping to host interrupt
CSL_CPINTC_enableSysInterrupt (hnd_EDMA_uPP, CSL_INTC0_CPU_3_2_EDMACC_GINT);
CSL_CPINTC_enableHostInterrupt (hnd_EDMA_uPP, 8);
CSL_CPINTC_enableAllHostInterrupt(hnd_EDMA_uPP);
/***************** interrupt configration for EDMA completed ***************/
//////////////////////////////////////第二步：host interrupt号转换为Event ID号，并绑定中断向量号/////////////////////////
/* Opening a intc handle for edma event */
vectId_uPP = CSL_INTC_VECTID_7;
//打开中断向量句柄,建立事件与中断之间的映射关系
//CSL_GEM_INTC0_OUT_8_PLUS_20_MUL_N 即CIC0_OUT(8+20*n)中8+20*n为Event ID
hIntcEdma_uPP = CSL_intcOpen (&intcObjEdma_uPP, CSL_GEM_INTC0_OUT_8_PLUS_20_MUL_N, \
&vectId_uPP , NULL);
/* Association of an EDMA event handler with the INTC routine 关联EDMA事件句柄到INTC程序*/
EventRecord_uPP.handler = &eventEdmaHandler;//EDMA事件句柄指针
EventRecord_uPP.arg = (void*)(hModule_uPP);//hModule_uPP是EMDA通道句柄
CSL_intcPlugEventHandler(hIntcEdma_uPP,&EventRecord_uPP); //建立事件和句柄的映射关系
CSL_intcHwControl(hIntcEdma_uPP,CSL_INTC_CMD_EVTCLEAR,NULL);
/* Enabling event edma 使能EDMA收图完成中断 */
CSL_intcHwControl(hIntcEdma_uPP,CSL_INTC_CMD_EVTENABLE,NULL);
/* Hook up the EDMA event with an completion code function handler */
EdmaEventHook(CSL_EDMA3_CHA_GPINT0, ImgEDMARecCompleted_INT);//收图完成中断
/***************** interrupt configration for EDMA completed ***************/
/*****************2.中断配置-----UPP接口 **************************/
////////////////////////////////////////////////用来与FPGA通信，接收图像//////////////////////////////////////////////////////////////////
/* open CPINTC0 to map the UPP completetion ISR event to the host interrupt */
hnd_UPP = CSL_CPINTC_open(0);
if (hnd_UPP == 0)
{
printf ("Error: Unable to open CPINTC-1\n");
return;
}
glbCpintcHnd[2] = (CSL_CPINTC_RegsOvly)hnd_UPP;
//需要根据应用修改UPP产生的事件编号及CPINTC输出channel号
//CSL_INTC0_RPINT为upp的system interrupt ，9为CIC0_OUT(9+20*n)中的host interrupt
CSL_CPINTC_mapSystemIntrToChannel (hnd_UPP, CSL_INTC0_RPINT, 9);
CSL_CPINTC_enableSysInterrupt (hnd_UPP, CSL_INTC0_RPINT);
CSL_CPINTC_enableHostInterrupt (hnd_UPP, 9);
CSL_CPINTC_enableAllHostInterrupt(hnd_UPP);
vectId_uPP = CSL_INTC_VECTID_4;
//绑定中断向量，即host interrupt转换为event id之后进入INTC绑定vectId_uPP
hIntcUpp= CSL_intcOpen (&intcObjUpp, CSL_GEM_INTC0_OUT_9_PLUS_20_MUL_N, &vectId_uPP , NULL);
gpioHandler.handler = (CSL_IntcEventHandler)&upp_isr;//事件句柄指针
gpioHandler.arg = 0; //传递给参数的句柄指针
CSL_intcPlugEventHandler(hIntcUpp, &gpioHandler); //建立事件和句柄的映射关系
CSL_intcHwControl(hIntcUpp,CSL_INTC_CMD_EVTCLEAR,NULL);
CSL_intcHwControl(hIntcUpp, CSL_INTC_CMD_EVTENABLE, NULL);
/***************** interrupt configration for UPP接口 **************************/
}
}