void D_PAD::Flip( int aTranslationY )
{
int y = GetPosition().y - aTranslationY;
y = -y; // invert about x axis.
y += aTranslationY;
SetY( y );
NEGATE( m_Pos0.y );
NEGATE( m_Offset.y );
NEGATE( m_DeltaSize.y );
SetOrientation( -GetOrientation() );
// flip pads layers
SetLayerMask( ChangeSideMaskLayer( m_layerMask ) );
// m_boundingRadius = -1; the shape has not been changed
}
void WinEDA_BasePcbFrame::Change_Side_Module(MODULE * Module, wxDC * DC)
/**********************************************************************/
/* Change de cote un composant : il y a inversion MIROIR autour de l'axe X
Le changement n'est fait que si la couche est
- CUIVRE ou CMP
Si DC == NULL, il n'y a pas de redessin du composant et du chevelu
*/
{
D_PAD* pt_pad ;
TEXTE_MODULE* pt_texte;
EDGE_MODULE * pt_edgmod ;
EDA_BaseStruct * PtStruct;
if ( Module == NULL ) return;
if( (Module->m_Layer != CMP_N) && (Module->m_Layer != CUIVRE_N) ) return;
m_CurrentScreen->SetModify();
if ( ! (Module->m_Flags & IS_MOVED) )
{
m_Pcb->m_Status_Pcb &= ~( LISTE_CHEVELU_OK | CONNEXION_OK);
if ( DC ) Module->Draw(DrawPanel, DC, wxPoint(0,0), GR_XOR);
/* Effacement chevelu general si necessaire */
if ( DC && g_Show_Ratsnest) DrawGeneralRatsnest(DC);
/* Init des variables utilisees dans la routine Dessine_Drag_segment() */
g_Offset_Module.x = 0;
g_Offset_Module.y = 0;
}
else // Module en deplacement
{
/* efface empreinte ( vue en contours) si elle a ete deja dessinee */
if ( DC )
{
DrawModuleOutlines(DrawPanel, DC, Module);
Dessine_Segments_Dragges(DrawPanel, DC);
}
}
/* mise a jour du Flag de l'empreinte et des couches des contours et textes */
Module->m_Layer = ChangeSideNumLayer(Module->m_Layer);
/* Inversion miroir de l'orientation */
Module->m_Orient = - Module->m_Orient;
NORMALIZE_ANGLE_POS(Module->m_Orient);
/* Inversion miroir + layers des pastilles */
pt_pad = Module->m_Pads;
for ( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
pt_pad->m_Pos.y -= Module->m_Pos.y ;
pt_pad->m_Pos.y = -pt_pad->m_Pos.y;
pt_pad->m_Pos.y += Module->m_Pos.y;
pt_pad->m_Pos0.y = - pt_pad->m_Pos0.y;
pt_pad->m_Offset.y = -pt_pad->m_Offset.y;
pt_pad->m_DeltaSize.y = -pt_pad->m_DeltaSize.y;
NEGATE_AND_NORMALIZE_ANGLE_POS(pt_pad->m_Orient);
/* change cote pour pastilles surfaciques */
pt_pad->m_Masque_Layer = ChangeSideMaskLayer(pt_pad->m_Masque_Layer);
}
/* Inversion miroir de la Reference et mise en miroir : */
pt_texte = Module->m_Reference;
pt_texte->m_Pos.y -= Module->m_Pos.y;
pt_texte->m_Pos.y = -pt_texte->m_Pos.y;
pt_texte->m_Pos.y += Module->m_Pos.y;
pt_texte->m_Pos0.y = pt_texte->m_Pos0.y;
pt_texte->m_Miroir = 1 ;
NEGATE_AND_NORMALIZE_ANGLE_POS(pt_texte->m_Orient);
pt_texte->m_Layer = Module->m_Layer;
pt_texte->m_Layer = ChangeSideNumLayer(pt_texte->m_Layer);
if( Module->m_Layer == CUIVRE_N) pt_texte->m_Layer = SILKSCREEN_N_CU;
if( Module->m_Layer == CMP_N) pt_texte->m_Layer = SILKSCREEN_N_CMP;
if( (Module->m_Layer == SILKSCREEN_N_CU) ||
(Module->m_Layer == ADHESIVE_N_CU) || (Module->m_Layer == CUIVRE_N) )
pt_texte->m_Miroir = 0 ;
/* Inversion miroir de la Valeur et mise en miroir : */
pt_texte = Module->m_Value;
pt_texte->m_Pos.y -= Module->m_Pos.y;
pt_texte->m_Pos.y = -pt_texte->m_Pos.y;
pt_texte->m_Pos.y += Module->m_Pos.y;
pt_texte->m_Pos0.y = pt_texte->m_Pos0.y;
pt_texte->m_Miroir = 1 ;
NEGATE_AND_NORMALIZE_ANGLE_POS(pt_texte->m_Orient);
pt_texte->m_Layer = Module->m_Layer;
pt_texte->m_Layer = ChangeSideNumLayer(pt_texte->m_Layer);
if( Module->m_Layer == CUIVRE_N) pt_texte->m_Layer = SILKSCREEN_N_CU;
if( Module->m_Layer == CMP_N) pt_texte->m_Layer = SILKSCREEN_N_CMP;
if( (Module->m_Layer == SILKSCREEN_N_CU) ||
(Module->m_Layer == ADHESIVE_N_CU) || (Module->m_Layer == CUIVRE_N) )
pt_texte->m_Miroir = 0 ;
/* Inversion miroir des dessins de l'empreinte : */
PtStruct = Module->m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext)
{
switch( PtStruct->m_StructType)
{
case TYPEEDGEMODULE:
pt_edgmod = (EDGE_MODULE *) PtStruct;
pt_edgmod->m_Start.y -= Module->m_Pos.y;
pt_edgmod->m_Start.y = -pt_edgmod->m_Start.y ;
pt_edgmod->m_Start.y += Module->m_Pos.y;
pt_edgmod->m_End.y -= Module->m_Pos.y;
pt_edgmod->m_End.y = -pt_edgmod->m_End.y ;
pt_edgmod->m_End.y += Module->m_Pos.y;
/* inversion des coords locales */
pt_edgmod->m_Start0.y = -pt_edgmod->m_Start0.y;
pt_edgmod->m_End0.y = -pt_edgmod->m_End0.y;
if ( pt_edgmod->m_Shape == S_ARC )
{
pt_edgmod->m_Angle = - pt_edgmod->m_Angle;
}
pt_edgmod->m_Layer = ChangeSideNumLayer(pt_edgmod->m_Layer);
break;
case TYPETEXTEMODULE:
/* Inversion miroir de la position et mise en miroir : */
pt_texte = (TEXTE_MODULE*)PtStruct;
pt_texte->m_Pos.y -= Module->m_Pos.y;
pt_texte->m_Pos.y = -pt_texte->m_Pos.y;
pt_texte->m_Pos.y += Module->m_Pos.y;
pt_texte->m_Pos0.y = pt_texte->m_Pos0.y;
pt_texte->m_Miroir = 1 ;
NEGATE_AND_NORMALIZE_ANGLE_POS(pt_texte->m_Orient);
pt_texte->m_Layer = Module->m_Layer;
pt_texte->m_Layer = ChangeSideNumLayer(pt_texte->m_Layer);
if( Module->m_Layer == CUIVRE_N) pt_texte->m_Layer = SILKSCREEN_N_CU;
if(Module->m_Layer == CMP_N) pt_texte->m_Layer = SILKSCREEN_N_CMP;
if((Module->m_Layer == SILKSCREEN_N_CU) ||
(Module->m_Layer == ADHESIVE_N_CU) || (Module->m_Layer == CUIVRE_N))
pt_texte->m_Miroir = 0 ;
break;
default: DisplayError(this, wxT("Unknown Draw Type")); break;
}
}
/* calcul du rectangle d'encadrement */
Module->Set_Rectangle_Encadrement();
Module->Display_Infos(this);
if( !(Module->m_Flags & IS_MOVED) ) /* Inversion simple */
{
if ( DC )
{
Module->Draw(DrawPanel, DC, wxPoint(0,0), GR_OR);
/* affichage chevelu general si necessaire */
ReCompile_Ratsnest_After_Changes( DC );
}
}
else
{
if ( DC )
{
DrawModuleOutlines(DrawPanel, DC, Module);
Dessine_Segments_Dragges(DrawPanel, DC);
}
m_Pcb->m_Status_Pcb &= ~CHEVELU_LOCAL_OK;
}
}
