virtual int set(const char *pcszAdapter, const char *pcszAddress, const char *pcszNetmask = 0)
{
const char *pcszFamily = isAddrV6(pcszAddress) ? "inet6" : "inet";
if (execute(CmdList(pcszAdapter) << pcszFamily))
execute(CmdList(pcszAdapter) << pcszFamily << "plumb" << "up");
return CmdIfconfig::set(pcszAdapter, pcszAddress, pcszNetmask);
};
virtual int addV4(const char *pcszAdapter, const char *pcszAddress, const char *pcszNetmask = 0)
{
AddressIPv4 addr(pcszAddress, pcszNetmask);
bringUp(pcszAdapter);
return execute(CmdList("addr") << "add" << addr.getAddressAndMask() <<
"broadcast" << addr.getBroadcast() << "dev" << pcszAdapter);
};
oexBOOL CVfsFtpSession::OnRead( oexINT x_nErr )
{
// Process the incomming data
if ( !TBufferedPort< CAutoSocket >::OnRead( x_nErr ) )
return oexFALSE;
// Grab the data
CStr8 sData = Rx().Read();
// First token should be the command
CStr8 sCmd = sData.ParseNextToken().ToUpper();
// USER
if ( sCmd == "USER" )
{ m_sUser = sData.ParseNextToken();
Write( CStr8( "331 Password required for " ) << m_sUser << ".\n" );
} // end if
// PASS
else if ( sCmd == "PASS" )
{ m_sPassword = sData.ParseNextToken();
Write( CStr8( "230 User \'" ) << m_sUser << "\' logged in at " << oexStrToStr8( CSysTime( 2 ).FormatTime( oexT( "GMT : %Y/%c/%d - %g:%m:%s.%l" ) ) ) << ".\n" );
} // end else if
// SYST
else if ( sCmd == "SYST" )
Write( "215 Windows_NT\n" );
// PWD
else if ( sCmd == "PWD" )
{ if ( !m_sCurrent.Length() )
m_sCurrent = "/";
Write( CStr8( "257 \"" ) << m_sCurrent << "\" is current directory.\n" );
} // end else if
// CWD
else if ( sCmd == "CWD" )
{ sData = sData.TrimWhiteSpace();
if ( *sData != '/' && *sData != '\\' )
sData = CStr8::BuildPath( m_sCurrent, sData );
m_sCurrent = sData;
Write( "250 CWD command successful.\n" );
} // end else if
// MKD
else if ( sCmd == "MKD" )
{ sData = sData.TrimWhiteSpace();
if ( *sData != '/' && *sData != '\\' )
sData = CStr8::BuildPath( m_sCurrent, sData );
m_vfs.MakeFolder( CStr8::BuildPath( m_sRoot, sData ).Ptr() );
Write( "250 MKD command successful.\n" );
} // end else if
// RMD
else if ( sCmd == "RMD" )
{ sData = sData.TrimWhiteSpace();
if ( *sData != '/' && *sData != '\\' )
sData = CStr8::BuildPath( m_sCurrent, sData );
m_vfs.Delete( CStr8::BuildPath( m_sRoot, sData ).Ptr() );
Write( "250 RMD command successful.\n" );
} // end else if
// CDUP
else if ( sCmd == "CDUP" )
{ m_sCurrent.RParse( "/\\" );
Write( "250 CDUP command successful.\n" );
} // end else if
// NOOP
else if ( sCmd == "NOOP" )
Write( "200 Ok.\n" );
// NOOP
else if ( sCmd == "REST" )
{ m_nsData.Destroy();
Write( "200 Ok.\n" );
} // end else if
// PASV
else if ( sCmd == "PASV" )
CmdPasv();
// TYPE
else if ( sCmd == "TYPE" )
{ m_sType = sData.ParseNextToken();
Write( CStr8( "200 Type set to " ) << m_sType << ".\n" );
} // end else if
// LIST
else if ( sCmd == "LIST" )
CmdList();
// RETR
else if ( sCmd == "RETR" )
CmdRetr( sData.TrimWhiteSpace().Ptr() );
// STOR
else if ( sCmd == "STOR" )
CmdStor( sData.TrimWhiteSpace().Ptr() );
// DELE
else if ( sCmd == "DELE" )
{ sData = sData.TrimWhiteSpace();
if ( *sData != '/' && *sData != '\\' )
sData = CStr8::BuildPath( m_sCurrent, sData );
m_vfs.Delete( CStr8::BuildPath( m_sRoot, sData ).Ptr() );
Write( "250 DELE command successful.\n" );
} // end if
// QUIT
else if ( sCmd == "QUIT" )
{ Write( "221 Goodbye.\n" );
CloseSession();
}
// Error...
else
Write( CStr8( "500 \'" ) << sCmd << "\': Huh?\n" );
return oexTRUE;
}
/** Brings up the adapter */
void bringUp(const char *pcszAdapter)
{ execute(CmdList("link") << "set" << "dev" << pcszAdapter << "up"); };
virtual CmdList getShowCommand(const char *pcszAdapter) const
{ return CmdList("addr") << "show" << "dev" << pcszAdapter; };
virtual int addV6(const char *pcszAdapter, const char *pcszAddress, const char *pcszNetmask = 0)
{
bringUp(pcszAdapter);
return execute(CmdList("addr") << "add" << pcszAddress << "dev" << pcszAdapter);
NOREF(pcszNetmask);
};
/**
* IPv4 and IPv6 syntax is the same, so we override `remove` instead of implementing
* family-specific commands. It would be easier to use the same body in both
* 'removeV4' and 'removeV6', so we override 'remove' to illustrate how to do common
* implementation.
*/
virtual int remove(const char *pcszAdapter, const char *pcszAddress)
{ return execute(CmdList("addr") << "del" << pcszAddress << "dev" << pcszAdapter); };
/* We can umplumb IPv4 interfaces only! */
virtual int removeV4(const char *pcszAdapter, const char *pcszAddress)
{
int rc = CmdIfconfig::removeV4(pcszAdapter, pcszAddress);
execute(CmdList(pcszAdapter) << "inet" << "unplumb");
return rc;
};
virtual int removeV4(const char *pcszAdapter, const char *pcszAddress)
{ return execute(CmdList(pcszAdapter) << "0.0.0.0"); NOREF(pcszAddress); };
virtual int removeV6(const char *pcszAdapter, const char *pcszAddress)
{ return execute(CmdList(pcszAdapter) << "inet6" << delCmdArg() << pcszAddress); };
virtual int setV4(const char *pcszAdapter, const char *pcszAddress, const char *pcszNetmask = 0)
{
if (!pcszNetmask)
return execute(CmdList(pcszAdapter) << pcszAddress);
return execute(CmdList(pcszAdapter) << pcszAddress << "netmask" << pcszNetmask);
};
virtual int addV6(const char *pcszAdapter, const char *pcszAddress, const char *pcszNetmask = 0)
{
return execute(CmdList(pcszAdapter) << "inet6" << addCmdArg() << pcszAddress);
NOREF(pcszNetmask);
};
virtual CmdList getShowCommand(const char *pcszAdapter) const
{ return CmdList(pcszAdapter); };
