示例#1
0
int main(int argc,
         char *arg[]) {
  EipUint16 nUniqueConnectionID;

  if (argc != 2) {
    printf("Wrong number of command line parameters!\n");
    printf("The correct command line parameters are:\n");
    printf(
      "./OpENer ip-address\n");
    printf(
      "    e.g. ./OpENer 192.168.259.22\n");
    exit(0);
  } else {
    DoublyLinkedListInitialize(&connection_list,
                               CipConnectionObjectListArrayAllocator,
                               CipConnectionObjectListArrayFree);
    /* fetch Internet address info from the platform */
    ConfigureDomainName();
    ConfigureHostName();
    ConfigureNetworkInterface(arg[1] );
  }

  /*for a real device the serial number should be unique per device */
  SetDeviceSerialNumber(123456789);

  /* nUniqueConnectionID should be sufficiently random or incremented and stored
   *  in non-volatile memory each time the device boots.
   */
  nUniqueConnectionID = rand();

  /* Setup the CIP Layer */
  CipStackInit(nUniqueConnectionID);

  /* Setup Network Handles */
  if ( kEipStatusOk == NetworkHandlerInitialize() ) {
    g_end_stack = 0;
#ifndef WIN32
    /* register for closing signals so that we can trigger the stack to end */
    signal(SIGHUP, LeaveStack);
#endif

    /* The event loop. Put other processing you need done continually in here */
    while (1 != g_end_stack) {
      if ( kEipStatusOk != NetworkHandlerProcessOnce() ) {
        break;
      }
    }

    /* clean up network state */
    NetworkHandlerFinish();
  }
  /* close remaining sessions and connections, cleanup used data */
  ShutdownCipStack();

  return -1;
}
示例#2
0
文件: main.c 项目: AlexRSc/OpENer
int main(int argc, char *arg[]) {
  EipUint8 acMyMACAddress[6];
  EipUint16 nUniqueConnectionID;

  if (argc != 12) {
    printf("Wrong number of command line parameters!\n");
    printf("The correct command line parameters are:\n");
    printf(
        "./OpENer ipaddress subnetmask gateway domainname hostaddress macaddress\n");
    printf(
        "    e.g. ./OpENer 192.168.0.2 255.255.255.0 192.168.0.1 test.com testdevice 00 15 C5 BF D0 87\n");
    exit(0);
  } else {
    /* fetch Internet address info from the platform */
    ConfigureNetworkInterface(arg[1], arg[2], arg[3]);
    ConfigureDomainName(arg[4]);
    ConfigureHostName(arg[5]);

    acMyMACAddress[0] = (EipUint8) strtoul(arg[6], NULL, 16);
    acMyMACAddress[1] = (EipUint8) strtoul(arg[7], NULL, 16);
    acMyMACAddress[2] = (EipUint8) strtoul(arg[8], NULL, 16);
    acMyMACAddress[3] = (EipUint8) strtoul(arg[9], NULL, 16);
    acMyMACAddress[4] = (EipUint8) strtoul(arg[10], NULL, 16);
    acMyMACAddress[5] = (EipUint8) strtoul(arg[11], NULL, 16);
    ConfigureMacAddress(acMyMACAddress);
  }

  /*for a real device the serial number should be unique per device */
  SetDeviceSerialNumber(123456789);

  /* nUniqueConnectionID should be sufficiently random or incremented and stored
   *  in non-volatile memory each time the device boots.
   */
  nUniqueConnectionID = rand();

  /* Setup the CIP Layer */
  CipStackInit(nUniqueConnectionID);

  /* Setup Network Handles */
  if (kEipStatusOk == NetworkHandlerInitialize()) {
    g_end_stack = 0;
#ifndef WIN32
    /* register for closing signals so that we can trigger the stack to end */
    signal(SIGHUP, LeaveStack);
#endif

    /* The event loop. Put other processing you need done continually in here */
    while (1 != g_end_stack) {
      if (kEipStatusOk != NetworkHandlerProcessOnce()) {
        break;
      }
    }

    /* clean up network state */
    NetworkHandlerFinish();
  }
  /* close remaining sessions and connections, cleanup used data */
  ShutdownCipStack();

  return -1;
}
示例#3
0
int main(int argc,
         char *arg[]) {

  cap_t capabilities;
  cap_value_t capabilies_list[1];

  capabilities = cap_get_proc();
  if (NULL == capabilities) {
    printf("Could not get capabilities\n");
    exit(0);
  }

  capabilies_list[0] = CAP_NET_RAW;
  if (-1
      == cap_set_flag(capabilities, CAP_EFFECTIVE, 1, capabilies_list,
                      CAP_SET) ) {
    cap_free(capabilities);
    printf("Could not set CAP_NET_RAW capability\n");
    exit(0);
  }

  if (-1 == cap_set_proc(capabilities) ) {
    cap_free(capabilities);
    printf("Could not push CAP_NET_RAW capability to process\n");
    exit(0);
  }

  if (-1 == cap_free(capabilities) ) {
    printf("Could not free capabilites value\n");
    exit(0);
  }

  if (argc != 2) {
    printf("Wrong number of command line parameters!\n");
    printf("The correct command line parameters are:\n");
    printf("./OpENer interfacename\n");
    printf("    e.g. ./OpENer eth1\n");
    exit(0);
  } else {
    DoublyLinkedListInitialize(&connection_list,
                               CipConnectionObjectListArrayAllocator,
                               CipConnectionObjectListArrayFree);
    /* fetch Internet address info from the platform */
    if (kEipStatusError == ConfigureNetworkInterface(arg[1]) ) {
      printf("Network interface %s not found.\n", arg[1]);
      exit(0);
    }
    ConfigureDomainName();
    ConfigureHostName();

    ConfigureMacAddress(arg[1]);
  }

  /* for a real device the serial number should be unique per device */
  SetDeviceSerialNumber(123456789);

  /* unique_connection_id should be sufficiently random or incremented and stored
   *  in non-volatile memory each time the device boots.
   */
  EipUint16 unique_connection_id = rand();

  /* Setup the CIP Layer */
  CipStackInit(unique_connection_id);

  /* Setup Network Handles */
  if (kEipStatusOk == NetworkHandlerInitialize() ) {
    g_end_stack = 0;
#ifndef WIN32
    /* register for closing signals so that we can trigger the stack to end */
    signal(SIGHUP, LeaveStack);
#endif
#ifdef OPENER_RT
    /* Memory lock all*/
    if (mlockall(MCL_CURRENT | MCL_FUTURE) == -1) {
      OPENER_TRACE_ERR("mlockall failed: %m\n");
      exit(-2);
    }

    struct sched_param param;
    pthread_attr_t attr;
    pthread_t thread;
    CipUint ret = pthread_attr_init(&attr);
    if (ret) {
      OPENER_TRACE_ERR("init pthread attributes failed\n");
      exit(-2);
    }

    /* Set stack size  */
    ret = pthread_attr_setstacksize(&attr,
                                    PTHREAD_STACK_MIN + OPENER_RT_THREAD_SIZE);
    if (ret) {
      OPENER_TRACE_ERR("setstacksize failed\n");
      exit(-2);
    }

    /* Set policy and priority of the thread */
    ret = pthread_attr_setschedpolicy(&attr, SCHED_RR);
    if (ret) {
      OPENER_TRACE_ERR("setschedpolicy failed\n");
      exit(-2);
    }
    param.sched_priority = 80;
    ret = pthread_attr_setschedparam(&attr, &param);
    if (ret) {
      OPENER_TRACE_ERR("pthread setschedparam failed\n");
      exit(-2);
    }
    /* scheduling parameters */
    ret = pthread_attr_setinheritsched(&attr, PTHREAD_EXPLICIT_SCHED);
    if (ret) {
      OPENER_TRACE_ERR("setinheritsched failed\n");
      exit(-2);
    }

    /* Create a thread with the specified attributes */
    ret = pthread_create(&thread, &attr, executeEventLoop, NULL);
    if (ret) {
      OPENER_TRACE_ERR("create pthread failed\n");
      exit(-2);
    }

    /* Join the thread */
    ret = pthread_join(thread, NULL);
    if (ret) {
      OPENER_TRACE_ERR("join pthread failed: %m\n");
    }
    /* Unlock memory */
    munlockall();
#else
    executeEventLoop();
#endif
    /* clean up network state */
    NetworkHandlerFinish();
  }
  /* close remaining sessions and connections, cleanup used data */
  ShutdownCipStack();

  return -1;
}