MODULE* PCB_EDIT_FRAME::Create_MuWaveBasicShape( const wxString& name, int pad_count )
{
MODULE* module;
int pad_num = 1;
wxString Line;
module = Create_1_Module( name );
if( module == NULL )
return NULL;
#define DEFAULT_SIZE 30
module->SetTimeStamp( GetNewTimeStamp() );
module->Value().SetSize( wxSize( DEFAULT_SIZE, DEFAULT_SIZE ) );
module->Value().SetPos0( wxPoint( 0, -DEFAULT_SIZE ) );
module->Value().Offset( wxPoint( 0, module->Value().GetPos0().y ) );
module->Value().SetThickness( DEFAULT_SIZE / 4 );
module->Reference().SetSize( wxSize( DEFAULT_SIZE, DEFAULT_SIZE ) );
module->Reference().SetPos0( wxPoint( 0, DEFAULT_SIZE ) );
module->Reference().Offset( wxPoint( 0, module->Reference().GetPos0().y ) );
module->Reference().SetThickness( DEFAULT_SIZE / 4 );
// Create 2 pads used in gaps and stubs. The gap is between these 2 pads
// the stub is the pad 2
while( pad_count-- )
{
D_PAD* pad = new D_PAD( module );
module->Pads().PushFront( pad );
int tw = GetBoard()->GetCurrentTrackWidth();
pad->SetSize( wxSize( tw, tw ) );
pad->SetPosition( module->GetPosition() );
pad->SetShape( PAD_RECT );
pad->SetAttribute( PAD_SMD );
pad->SetLayerMask( LAYER_FRONT );
Line.Printf( wxT( "%d" ), pad_num );
pad->SetPadName( Line );
pad_num++;
}
return module;
}
MODULE * WinEDA_PcbFrame::Create_MuWaveBasicShape(wxDC * DC,
const wxString & name, int pad_count)
/***************************************************************************/
/* Create a footprint with pad_count pads for micro wave applications
This footprint has pad_count pads:
SMD, rectangular, H size = V size = current track width.
*/
{
MODULE * Module;
int pad_num = 1;
char Line[256];
Module = Create_1_Module(DC, name);
if ( Module == NULL ) return NULL;
Module->m_TimeStamp = GetTimeStamp();
Module->m_Value->m_Size = wxSize(30,30);
Module->m_Value->m_Pos0.y = -30;
Module->m_Value->m_Pos.y += Module->m_Value->m_Pos0.y;
Module->m_Reference->m_Size = wxSize(30,30);
Module->m_Reference->m_Pos0.y = 30;
Module->m_Reference->m_Pos.y += Module->m_Reference->m_Pos0.y;
/* Creation des pastilles formant le gap */
while ( pad_count -- )
{
D_PAD* pad;
pad = new D_PAD(Module);
pad->Pback = Module;
if ( Module->m_Pads == NULL )
{
Module->m_Pads = pad;
}
else
{
Module->m_Pads->Pback = pad;
pad->Pnext = Module->m_Pads;
Module->m_Pads = pad;
}
pad->m_Size.x = pad->m_Size.y = g_DesignSettings.m_CurrentTrackWidth;
pad->m_Pos = Module->m_Pos;
pad->m_PadShape = RECT;
pad->m_Attribut = SMD;
pad->m_Masque_Layer = CMP_LAYER;
sprintf(Line, "%d", pad_num);
pad->SetPadName(Line);
pad_num++;
}
if (DC) Module->Draw(DrawPanel, DC, wxPoint(0,0), GR_OR) ;
return Module;
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
{
D_PAD* pad;
int ll;
wxString msg;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
if( Self_On == 0 )
{
DisplayError( this, wxT( "Starting point not init.." ) );
return NULL;
}
Self_On = 0;
Mself.m_End = GetCrossHairPosition();
wxPoint pt = Mself.m_End - Mself.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
Mself.lng = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, Mself.lng );
wxTextEntryDialog dlg( this, _( "Length:" ), _( "Length" ), msg );
if( dlg.ShowModal() != wxID_OK )
return NULL; // canceled by user
msg = dlg.GetValue();
Mself.lng = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( Mself.lng < min_len )
{
DisplayError( this, _( "Requested length < minimum length" ) );
return NULL;
}
// Calculate the elements.
Mself.m_Width = GetBoard()->GetCurrentTrackWidth();
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, Mself.m_Start, Mself.m_End, Mself.lng, Mself.m_Width );
if( !ll )
{
DisplayError( this, _( "Requested length too large" ) );
return NULL;
}
// Generate module.
MODULE* module;
module = Create_1_Module( wxEmptyString );
if( module == NULL )
return NULL;
// here the module is already in the BOARD, Create_1_Module() does that.
module->SetFPID( FPID( std::string( "MuSelf" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( Mself.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( Mself.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItems().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->Pads().PushFront( pad );
pad->SetPadName( wxT( "1" ) );
pad->SetPosition( Mself.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( Mself.m_Width, Mself.m_Width ) );
pad->SetLayerMask( GetLayerMask( module->GetLayer() ) );
pad->SetAttribute( PAD_SMD );
pad->SetShape( PAD_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->Pads().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetPadName( wxT( "2" ) );
pad->SetPosition( Mself.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
SetMsgPanel( module );
wxPoint refPos( ( Mself.m_Start.x + Mself.m_End.x ) / 2,
( Mself.m_Start.y + Mself.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetSize().y;
module->Reference().SetTextPosition( refPos );
valPos.y += module->Value().GetSize().y;
module->Value().SetTextPosition( valPos );
module->Reference().SetPos0( module->Reference().GetTextPosition() - module->GetPosition() );
module->Value().SetPos0( module->Value().GetTextPosition() - module->GetPosition() );
module->CalculateBoundingBox();
module->Draw( m_canvas, DC, GR_OR );
return module;
}