示例#1
0
int ex_put_set_param (int exoid,
                      ex_entity_type set_type,
                      int set_id,
                      int num_entries_in_set,
                      int num_dist_fact_in_set)
{
  int status;
  size_t temp;
  int dimid, varid, set_id_ndx, dims[1]; 
  size_t start[1]; 
  int num_sets;
  int ldum;
  int cur_num_sets, set_stat;
  char *cdum;
  char errmsg[MAX_ERR_LENGTH];
  char* dimptr;
  char* idsptr;
  char* statptr;
  char* numentryptr = NULL;
  char* numdfptr = NULL;
  char* factptr = NULL;
  char* entryptr = NULL;
  char* extraptr = NULL;

  exerrval = 0; /* clear error code */

  cdum = 0;

  /* setup pointers based on set_type 
     NOTE: there is another block that sets more stuff later ... */
  if (set_type == EX_NODE_SET) {
    dimptr = DIM_NUM_NS;
    idsptr = VAR_NS_IDS;
    statptr = VAR_NS_STAT;
  }
  else if (set_type == EX_EDGE_SET) {
    dimptr = DIM_NUM_ES;
    idsptr = VAR_ES_IDS;
    statptr = VAR_ES_STAT;
  }
  else if (set_type == EX_FACE_SET) {
    dimptr = DIM_NUM_FS;
    idsptr = VAR_FS_IDS;
    statptr = VAR_FS_STAT;
  }
  else if (set_type == EX_SIDE_SET) {
    dimptr = DIM_NUM_SS;
    idsptr = VAR_SS_IDS;
    statptr = VAR_SS_STAT;
  }
  else if (set_type == EX_ELEM_SET) {
    dimptr = DIM_NUM_ELS;
    idsptr = VAR_ELS_IDS;
    statptr = VAR_ELS_STAT;
  }
  else {
    exerrval = EX_FATAL;
    sprintf(errmsg,
	    "Error: invalid set type (%d)", set_type);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  /* first check if any of that set type is specified */

  if ((status = nc_inq_dimid(exoid, dimptr, &dimid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: no %ss specified in file id %d", ex_name_of_object(set_type),
	    exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  /* Check for duplicate set id entry */
  ex_id_lkup(exoid, set_type, set_id);
  if (exerrval != EX_LOOKUPFAIL) {  /* found the side set id */
    sprintf(errmsg,
	    "Error: %s %d already defined in file id %d", ex_name_of_object(set_type),
	    set_id,exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return(EX_FATAL);
  }

  /* Get number of sets specified for this file */
  if ((status = nc_inq_dimlen(exoid,dimid,&temp)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
            "Error: failed to get number of %ss in file id %d",
	    ex_name_of_object(set_type), exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }
  num_sets = temp;


  /* Keep track of the total number of sets defined using a counter stored
     in a linked list keyed by exoid.
     NOTE: ex_get_file_item finds the maximum number of sets defined
     for a specific file and returns that value.
  */
  cur_num_sets=ex_get_file_item(exoid, ex_get_counter_list(set_type));
  if (cur_num_sets >= num_sets) {
    exerrval = EX_FATAL;
    sprintf(errmsg,
	    "Error: exceeded number of %ss (%d) defined in file id %d",
	    ex_name_of_object(set_type), num_sets,exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  /*   NOTE: ex_inc_file_item finds the current number of sets defined
       for a specific file and returns that value incremented. */

  cur_num_sets=ex_inc_file_item(exoid, ex_get_counter_list(set_type));
  set_id_ndx = cur_num_sets + 1;

  /* setup more pointers based on set_type */
  if (set_type == EX_NODE_SET) {
    numentryptr = DIM_NUM_NOD_NS(set_id_ndx);
    entryptr = VAR_NODE_NS(set_id_ndx);
    extraptr = NULL;
    /* note we are using DIM_NUM_NODE_NS instead of DIM_NUM_DF_NS */
    numdfptr = DIM_NUM_NOD_NS(set_id_ndx);
    factptr = VAR_FACT_NS(set_id_ndx);
  }
  else if (set_type == EX_EDGE_SET) {
    numentryptr = DIM_NUM_EDGE_ES(set_id_ndx);
    entryptr = VAR_EDGE_ES(set_id_ndx);
    extraptr = VAR_ORNT_ES(set_id_ndx);
    numdfptr = DIM_NUM_DF_ES(set_id_ndx);
    factptr = VAR_FACT_ES(set_id_ndx);
  }
  else if (set_type == EX_FACE_SET) {
    numentryptr = DIM_NUM_FACE_FS(set_id_ndx);
    entryptr = VAR_FACE_FS(set_id_ndx);
    extraptr = VAR_ORNT_FS(set_id_ndx);
    numdfptr = DIM_NUM_DF_FS(set_id_ndx);
    factptr = VAR_FACT_FS(set_id_ndx);
  }
  else if (set_type == EX_SIDE_SET) {
    numentryptr = DIM_NUM_SIDE_SS(set_id_ndx);
    entryptr = VAR_ELEM_SS(set_id_ndx);
    extraptr = VAR_SIDE_SS(set_id_ndx);
    numdfptr = DIM_NUM_DF_SS(set_id_ndx);
    factptr = VAR_FACT_SS(set_id_ndx);
  }
  if (set_type == EX_ELEM_SET) {
    numentryptr = DIM_NUM_ELE_ELS(set_id_ndx);
    entryptr = VAR_ELEM_ELS(set_id_ndx);
    extraptr = NULL;
    numdfptr = DIM_NUM_DF_ELS(set_id_ndx);
    factptr = VAR_FACT_ELS(set_id_ndx);
  }

  /* write out information to previously defined variable */

  /* first: get id of set id variable */
  if ((status = nc_inq_varid(exoid, idsptr, &varid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to locate %s %d in file id %d", ex_name_of_object(set_type),
	    set_id, exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  /* write out set id */
  start[0] = cur_num_sets;

  ldum = (int)set_id;
  if ((status = nc_put_var1_int(exoid, varid, start, &ldum)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to store %s id %d in file id %d", ex_name_of_object(set_type),
	    set_id, exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  if (num_entries_in_set == 0) /* Is this a NULL  set? */
    set_stat = 0; /* change set status to NULL */
  else
    set_stat = 1; /* change set status to TRUE */

  if ((status = nc_inq_varid(exoid, statptr, &varid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to locate %s status in file id %d", ex_name_of_object(set_type),
	    exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  ldum = (int)set_stat;
  if ((status = nc_put_var1_int(exoid, varid, start, &ldum)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to store %s %d status to file id %d", ex_name_of_object(set_type),
	    set_id, exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  if (num_entries_in_set == 0) {/* Is this a NULL set? */
    return(EX_NOERR);
  }

  /* put netcdf file into define mode  */
  if ((status = nc_redef (exoid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to put file id %d into define mode",
	    exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }


  /* define dimensions and variables */
  if ((status = nc_def_dim(exoid, numentryptr,
			   num_entries_in_set, &dimid)) != NC_NOERR) {
    exerrval = status;
    if (status == NC_ENAMEINUSE)
      {
	sprintf(errmsg,
		"Error: %s %d size already defined in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_set_param",errmsg,exerrval);
      }
    else {
      sprintf(errmsg,
	      "Error: failed to define number of entries in %s %d in file id %d",
	      ex_name_of_object(set_type), set_id,exoid);
      ex_err("ex_put_set_param",errmsg,exerrval);
    }
    goto error_ret;
  }

  /* create variable array in which to store the entry lists */

  dims[0] = dimid;
  if ((status = nc_def_var(exoid, entryptr, NC_INT, 1, dims, &varid)) != NC_NOERR) {
    exerrval = status;
    if (status == NC_ENAMEINUSE) {
      sprintf(errmsg,
	      "Error: entry list already exists for %s %d in file id %d",
	      ex_name_of_object(set_type), set_id,exoid);
      ex_err("ex_put_set_param",errmsg,exerrval);
    } else {
      sprintf(errmsg,
	      "Error: failed to create entry list for %s %d in file id %d",
	      ex_name_of_object(set_type), set_id,exoid);
      ex_err("ex_put_set_param",errmsg,exerrval);
    }
    goto error_ret;            /* exit define mode and return */
  }

  if (extraptr) {
    if ((status = nc_def_var(exoid, extraptr, NC_INT, 1, dims, &varid)) != NC_NOERR) {
      exerrval = status;
      if (status == NC_ENAMEINUSE) {
	sprintf(errmsg,
		"Error: extra list already exists for %s %d in file id %d",
		ex_name_of_object(set_type), set_id, exoid);
	ex_err("ex_put_set_param",errmsg,exerrval);
      } else {
	sprintf(errmsg,
		"Error: failed to create extra list for %s %d in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_set_param",errmsg,exerrval);
      }
      goto error_ret;         /* exit define mode and return */
           
    }
  }

  /* Create distribution factors variable if required */

  if (num_dist_fact_in_set > 0) {

    if (set_type == EX_NODE_SET) {
      /* but num_dist_fact_in_set must equal number of nodes */
      if (num_dist_fact_in_set != num_entries_in_set) {
	exerrval = EX_FATAL;
	sprintf(errmsg,
		"Error: # dist fact (%d) not equal to # nodes (%d) in node  set %d file id %d",
		num_dist_fact_in_set, num_entries_in_set, set_id, exoid);
	ex_err("ex_put_set_param",errmsg,exerrval);
	goto error_ret;    /* exit define mode and return */
      }

      /* resuse dimid from entry lists */

    } else {
      if ((status = nc_def_dim(exoid, numdfptr, 
			       num_dist_fact_in_set, &dimid)) != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to define number of dist factors in %s %d in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_set_param",errmsg,exerrval);
	goto error_ret;          /* exit define mode and return */
      }
    }

    /* create variable array in which to store the set distribution factors
     */
    dims[0] = dimid;
    if ((status = nc_def_var(exoid, factptr, nc_flt_code(exoid), 1, dims, &varid)) != NC_NOERR) {
      exerrval = status;
      if (status == NC_ENAMEINUSE) {
	sprintf(errmsg,
		"Error: dist factors list already exists for %s %d in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_set_param",errmsg,exerrval);
      } else {
	sprintf(errmsg,
		"Error: failed to create dist factors list for %s %d in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_set_param",errmsg,exerrval);
      }
      goto error_ret;            /* exit define mode and return */
    }
  }

  /* leave define mode  */
  if ((status = nc_enddef (exoid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to complete definition in file id %d", exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  return (EX_NOERR);

  /* Fatal error: exit definition mode and return */
 error_ret:
  if (nc_enddef (exoid) != NC_NOERR) {    /* exit define mode */
    sprintf(errmsg,
	    "Error: failed to complete definition for file id %d",
	    exoid);
    ex_err("ex_put_set_param",errmsg,exerrval);
  }
  return (EX_FATAL);
}
示例#2
0
int ex_put_sets (int   exoid,
		 size_t set_count,
		 const struct ex_set *sets)
{
  size_t i;
  int needs_define = 0;
  int set_stat;
  int dimid, varid, status, dims[1];
  int set_id_ndx;
  size_t start[1]; 
  int cur_num_sets;
  char errmsg[MAX_ERR_LENGTH];
  int* sets_to_define = NULL;
  char* numentryptr 	= NULL;
  char* entryptr = NULL;
  char* extraptr = NULL;
  char* idsptr = NULL;
  char* statptr = NULL;
  char* numdfptr = NULL;
  char* factptr = NULL;

  size_t int_size;
  
  exerrval = 0; /* clear error code */

  sets_to_define = malloc(set_count*sizeof(int));
  
  /* Note that this routine can be called:
     1) just define the sets
     2) just output the set data (after a previous call to define)
     3) define and output the set data in one call.
  */
  for (i=0; i < set_count; i++) {
    /* first check if any sets are specified */
    if ((status = nc_inq_dimid(exoid, ex_dim_num_objects(sets[i].type), &dimid)) != NC_NOERR) {
      if (status == NC_EBADDIM) {
	exerrval = status;
	sprintf(errmsg,
		"Error: no %ss defined for file id %d", ex_name_of_object(sets[i].type), exoid);
	ex_err("ex_put_sets",errmsg,exerrval);
      } else {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to locate %ss defined in file id %d",
		ex_name_of_object(sets[i].type), exoid);
	ex_err("ex_put_sets",errmsg,exerrval);
      }
      return (EX_FATAL);
    }

    set_id_ndx = ex_id_lkup(exoid, sets[i].type, sets[i].id);
    if (exerrval != EX_LOOKUPFAIL) {  /* found the side set id, so set is already defined... */
      sets_to_define[i] = 0;
      continue;
    } else {
      needs_define++;
      sets_to_define[i] = 1;
    }
  }
    
  if (needs_define > 0) {
    /* put netcdf file into define mode  */
    if ((status = nc_redef (exoid)) != NC_NOERR) {
      exerrval = status;
      sprintf(errmsg,
	      "Error: failed to put file id %d into define mode",
	      exoid);
      ex_err("ex_put_sets",errmsg,exerrval);
      return (EX_FATAL);
    }
    
    for (i=0; i < set_count; i++) {
      if (sets_to_define[i] == 0)
	continue;
      
      /*   NOTE: ex_inc_file_item finds the current number of sets defined
	   for a specific file and returns that value incremented. */
      cur_num_sets=ex_inc_file_item(exoid, ex_get_counter_list(sets[i].type));
      set_id_ndx = cur_num_sets + 1;
      sets_to_define[i] = set_id_ndx;
      
      if (sets[i].num_entry == 0)
	continue;
      
      /* setup pointers based on set_type */
      if (sets[i].type == EX_NODE_SET) {
	numentryptr = DIM_NUM_NOD_NS(set_id_ndx);
	entryptr = VAR_NODE_NS(set_id_ndx);
	extraptr = NULL;
	/* note we are using DIM_NUM_NODE_NS instead of DIM_NUM_DF_NS */
	numdfptr = DIM_NUM_NOD_NS(set_id_ndx);
	factptr = VAR_FACT_NS(set_id_ndx);
      }
      else if (sets[i].type == EX_EDGE_SET) {
	numentryptr = DIM_NUM_EDGE_ES(set_id_ndx);
	entryptr = VAR_EDGE_ES(set_id_ndx);
	extraptr = VAR_ORNT_ES(set_id_ndx);
	numdfptr = DIM_NUM_DF_ES(set_id_ndx);
	factptr = VAR_FACT_ES(set_id_ndx);
      }
      else if (sets[i].type == EX_FACE_SET) {
	numentryptr = DIM_NUM_FACE_FS(set_id_ndx);
	entryptr = VAR_FACE_FS(set_id_ndx);
	extraptr = VAR_ORNT_FS(set_id_ndx);
	numdfptr = DIM_NUM_DF_FS(set_id_ndx);
	factptr = VAR_FACT_FS(set_id_ndx);
      }
      else if (sets[i].type == EX_SIDE_SET) {
	numentryptr = DIM_NUM_SIDE_SS(set_id_ndx);
	entryptr = VAR_ELEM_SS(set_id_ndx);
	extraptr = VAR_SIDE_SS(set_id_ndx);
	numdfptr = DIM_NUM_DF_SS(set_id_ndx);
	factptr = VAR_FACT_SS(set_id_ndx);
      }
      else if (sets[i].type == EX_ELEM_SET) {
	numentryptr = DIM_NUM_ELE_ELS(set_id_ndx);
	entryptr = VAR_ELEM_ELS(set_id_ndx);
	extraptr = NULL;
	numdfptr = DIM_NUM_DF_ELS(set_id_ndx);
	factptr = VAR_FACT_ELS(set_id_ndx);
      }

      /* define dimensions and variables */
      if ((status = nc_def_dim(exoid, numentryptr,
			       sets[i].num_entry, &dimid)) != NC_NOERR) {
	exerrval = status;
	if (status == NC_ENAMEINUSE) {
	  sprintf(errmsg,
		  "Error: %s %"PRId64" -- size already defined in file id %d",
		  ex_name_of_object(sets[i].type), sets[i].id,exoid);
	  ex_err("ex_put_sets",errmsg,exerrval);
	}
	else {
	  sprintf(errmsg,
		  "Error: failed to define number of entries in %s %"PRId64" in file id %d",
		  ex_name_of_object(sets[i].type), sets[i].id,exoid);
	  ex_err("ex_put_sets",errmsg,exerrval);
	}
	goto error_ret;
      }
      
      int_size = sizeof(int);
      if (ex_int64_status(exoid) & EX_BULK_INT64_DB) {
	int_size = sizeof(int64_t);
      }
      
      /* create variable array in which to store the entry lists */
      dims[0] = dimid;
      if ((status = nc_def_var(exoid, entryptr, int_size, 1, dims, &varid)) != NC_NOERR) {
	exerrval = status;
	if (status == NC_ENAMEINUSE) {
	  sprintf(errmsg,
		  "Error: entry list already exists for %s %"PRId64" in file id %d",
		  ex_name_of_object(sets[i].type), sets[i].id,exoid);
	  ex_err("ex_put_sets",errmsg,exerrval);
	} else {
	  sprintf(errmsg,
		  "Error: failed to create entry list for %s %"PRId64" in file id %d",
		  ex_name_of_object(sets[i].type), sets[i].id,exoid);
	  ex_err("ex_put_sets",errmsg,exerrval);
	}
	goto error_ret;            /* exit define mode and return */
      }
      ex_compress_variable(exoid, varid, 1);
      
      if (extraptr) {
	if ((status = nc_def_var(exoid, extraptr, int_size, 1, dims, &varid)) != NC_NOERR) {
	  exerrval = status;
	  if (status == NC_ENAMEINUSE) {
	    sprintf(errmsg,
		    "Error: extra list already exists for %s %"PRId64" in file id %d",
		    ex_name_of_object(sets[i].type), sets[i].id, exoid);
	    ex_err("ex_put_sets",errmsg,exerrval);
	  } else {
	    sprintf(errmsg,
		    "Error: failed to create extra list for %s %"PRId64" in file id %d",
		    ex_name_of_object(sets[i].type), sets[i].id,exoid);
	    ex_err("ex_put_sets",errmsg,exerrval);
	  }
	  goto error_ret;         /* exit define mode and return */
	}
	ex_compress_variable(exoid, varid, 1);
      }

      /* Create distribution factors variable if required */
      if (sets[i].num_distribution_factor > 0) {
	if (sets[i].type != EX_SIDE_SET) {
	  /* but sets[i].num_distribution_factor must equal number of nodes */
	  if (sets[i].num_distribution_factor != sets[i].num_entry) {
	    exerrval = EX_FATAL;
	    sprintf(errmsg,
		    "Error: # dist fact (%"PRId64") not equal to # nodes (%"PRId64") in node  set %"PRId64" file id %d",
		    sets[i].num_distribution_factor, sets[i].num_entry, sets[i].id, exoid);
	    ex_err("ex_put_sets",errmsg,exerrval);
	    goto error_ret;    /* exit define mode and return */
	  }
	} else {
	  /* resuse dimid from entry lists */
	  if ((status = nc_def_dim(exoid, numdfptr, 
				   sets[i].num_distribution_factor, &dimid)) != NC_NOERR) {
	    exerrval = status;
	    sprintf(errmsg,
		    "Error: failed to define number of dist factors in %s %"PRId64" in file id %d",
		    ex_name_of_object(sets[i].type), sets[i].id,exoid);
	    ex_err("ex_put_sets",errmsg,exerrval);
	    goto error_ret;          /* exit define mode and return */
	  }
	}
	
	/* create variable array in which to store the set distribution factors
	 */
	dims[0] = dimid;
	if ((status = nc_def_var(exoid, factptr, nc_flt_code(exoid), 1, dims, &varid)) != NC_NOERR) {
	  exerrval = status;
	  if (status == NC_ENAMEINUSE) {
	    sprintf(errmsg,
		    "Error: dist factors list already exists for %s %"PRId64" in file id %d",
		    ex_name_of_object(sets[i].type), sets[i].id,exoid);
	    ex_err("ex_put_sets",errmsg,exerrval);
	  } else {
	    sprintf(errmsg,
		    "Error: failed to create dist factors list for %s %"PRId64" in file id %d",
		    ex_name_of_object(sets[i].type), sets[i].id,exoid);
	    ex_err("ex_put_sets",errmsg,exerrval);
	  }
	  goto error_ret;            /* exit define mode and return */
	}
	ex_compress_variable(exoid, varid, 2);
      }
    }

    /* leave define mode  */
    if ((status = nc_enddef (exoid)) != NC_NOERR) {
      exerrval = status;
      sprintf(errmsg,
	      "Error: failed to complete definition in file id %d", exoid);
      ex_err("ex_put_sets",errmsg,exerrval);
      return (EX_FATAL);
    }

    /* Output the set ids and status... */
    for (i=0; i < set_count; i++) {
    /* setup pointers based on sets[i].type */
      if (sets[i].type == EX_NODE_SET) {
	idsptr = VAR_NS_IDS;
	statptr = VAR_NS_STAT;
      }
      else if (sets[i].type == EX_EDGE_SET) {
	idsptr = VAR_ES_IDS;
	statptr = VAR_ES_STAT;
      }
      else if (sets[i].type == EX_FACE_SET) {
	idsptr = VAR_FS_IDS;
	statptr = VAR_FS_STAT;
      }
      else if (sets[i].type == EX_SIDE_SET) {
	idsptr = VAR_SS_IDS;
	statptr = VAR_SS_STAT;
      }
      else if (sets[i].type == EX_ELEM_SET) {
	idsptr = VAR_ELS_IDS;
	statptr = VAR_ELS_STAT;
      }
      
      /* first: get id of set id variable */
      if ((status = nc_inq_varid(exoid, idsptr, &varid)) != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to locate %s %"PRId64" in file id %d", ex_name_of_object(sets[i].type),
		sets[i].id, exoid);
	ex_err("ex_put_sets",errmsg,exerrval);
	return (EX_FATAL);
      }
      
      /* write out set id */
      start[0] = sets_to_define[i]-1;
      status = nc_put_var1_longlong(exoid, varid, start, (long long*)&sets[i].id);
    
      if (status != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to store %s id %"PRId64" in file id %d", ex_name_of_object(sets[i].type),
		sets[i].id, exoid);
	ex_err("ex_put_sets",errmsg,exerrval);
	return (EX_FATAL);
      }
      
      set_stat = (sets[i].num_entry == 0) ? 0 : 1;
      
      if ((status = nc_inq_varid(exoid, statptr, &varid)) != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to locate %s status in file id %d", ex_name_of_object(sets[i].type),
		exoid);
	ex_err("ex_put_sets",errmsg,exerrval);
	return (EX_FATAL);
      }
      
      if ((status = nc_put_var1_int(exoid, varid, start, &set_stat)) != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to store %s %"PRId64" status to file id %d", ex_name_of_object(sets[i].type),
		sets[i].id, exoid);
	ex_err("ex_put_sets",errmsg,exerrval);
	return (EX_FATAL);
      }
    }
    free(sets_to_define);
  }
  
  /* Sets are now all defined; see if any set data needs to be output... */
  status = EX_NOERR;
  for (i=0; i < set_count; i++) {
    int stat;
    if (sets[i].entry_list != NULL || sets[i].extra_list != NULL) {
      /* NOTE: ex_put_set will write the warning/error message... */
      stat = ex_put_set(exoid, sets[i].type, sets[i].id, sets[i].entry_list, sets[i].extra_list);
      if (stat != EX_NOERR) status = EX_FATAL;
    }
    if (sets[i].distribution_factor_list != NULL) {
      /* NOTE: ex_put_set_dist_fact will write the warning/error message... */
      stat = ex_put_set_dist_fact(exoid, sets[i].type, sets[i].id, sets[i].distribution_factor_list);
      if (stat != EX_NOERR) status = EX_FATAL;
    }
  }  
  return (status);

  /* Fatal error: exit definition mode and return */
 error_ret:
  free(sets_to_define);
  
  if (nc_enddef (exoid) != NC_NOERR) {    /* exit define mode */
    sprintf(errmsg,
	    "Error: failed to complete definition for file id %d",
	    exoid);
    ex_err("ex_put_sets",errmsg,exerrval);
  }
  return (EX_FATAL);
}
示例#3
0
int ex_get_set_dist_fact (int   exoid,
			  int   set_type,
			  int   set_id,
			  void *set_dist_fact)
{

   int dimid, dist_id, set_id_ndx;
   long num_df_in_set, count[1], start[1];
   char errmsg[MAX_ERR_LENGTH];
   char* typeName;
   char* dimptr;
   char* idsptr;
   char* numdfptr;
   char* factptr;
 
   exerrval = 0; /* clear error code */

   /* setup pointers based on set_type 
    NOTE: there is another block that sets more stuff later ... */

   if (set_type == EX_NODE_SET) {
     typeName = "node";
     dimptr = DIM_NUM_NS;
     idsptr = VAR_NS_IDS;
   }
   else if (set_type == EX_EDGE_SET) {
     typeName = "edge";
     dimptr = DIM_NUM_ES;
     idsptr = VAR_ES_IDS;
   }
   else if (set_type == EX_FACE_SET) {
     typeName = "face";
     dimptr = DIM_NUM_FS;
     idsptr = VAR_FS_IDS;
   }
   else if (set_type == EX_SIDE_SET) {
     typeName = "side";
     dimptr = DIM_NUM_SS;
     idsptr = VAR_SS_IDS;
   }
   else if (set_type == EX_ELEM_SET) {
     typeName = "elem";
     dimptr = DIM_NUM_ELS;
     idsptr = VAR_ELS_IDS;
   }
   else {
     exerrval = EX_FATAL;
     sprintf(errmsg,
             "Error: invalid set type (%d)", set_type);
     ex_err("ex_put_set_param",errmsg,exerrval);
     return (EX_FATAL);
   }

/* first check if any sets are specified */

   if ((dimid = ncdimid (exoid, dimptr)) == -1)
   {
     exerrval = ncerr;
     sprintf(errmsg,
            "Warning: no %s sets stored in file id %d",
             typeName, exoid);
     ex_err("ex_get_set_dist_fact",errmsg,exerrval);
     return (EX_WARN);
   }

/* Lookup index of set id in VAR_*S_IDS array */

   set_id_ndx = ex_id_lkup(exoid,idsptr,set_id);
   if (exerrval != 0) 
   {
     if (exerrval == EX_NULLENTITY)
     {
       sprintf(errmsg,
              "Warning: %s set %d is NULL in file id %d",
               typeName, set_id,exoid);
       ex_err("ex_get_set_dist_fact",errmsg,EX_MSG);
       return (EX_WARN);
     }
     else
     {
       sprintf(errmsg,
     "Error: failed to locate %s set id %d in VAR_*S_IDS array in file id %d",
               typeName, set_id,exoid);
       ex_err("ex_get_set_dist_fact",errmsg,exerrval);
       return (EX_FATAL);
     }
   }

  /* setup more pointers based on set_type */
   if (set_type == EX_NODE_SET) {
     /* note we are using DIM_NUM_NODE_NS instead of DIM_NUM_DF_NS */
     numdfptr = DIM_NUM_NOD_NS(set_id_ndx);
     factptr = VAR_FACT_NS(set_id_ndx);
   }
   else if (set_type == EX_EDGE_SET) {
     numdfptr = DIM_NUM_DF_ES(set_id_ndx);
     factptr = VAR_FACT_ES(set_id_ndx);
   }
   else if (set_type == EX_FACE_SET) {
     numdfptr = DIM_NUM_DF_FS(set_id_ndx);
     factptr = VAR_FACT_FS(set_id_ndx);
   }
   else if (set_type == EX_SIDE_SET) {
     numdfptr = DIM_NUM_DF_SS(set_id_ndx);
     factptr = VAR_FACT_SS(set_id_ndx);
   }
   if (set_type == EX_ELEM_SET) {
     numdfptr = DIM_NUM_DF_ELS(set_id_ndx);
     factptr = VAR_FACT_ELS(set_id_ndx);
   }

/* inquire id's of previously defined dimensions and variables */

   if ((dimid = ncdimid (exoid, numdfptr)) == -1)
   {
     exerrval = ncerr;
     sprintf(errmsg,
     "Warning: dist factors not stored for %s set %d in file id %d",
             typeName, set_id,exoid);
     ex_err("ex_get_set_dist_fact",errmsg,exerrval);
     return (EX_WARN);          /* complain - but not too loud */
   }

   if (ncdiminq (exoid, dimid, (char *) 0, &num_df_in_set) == -1)
   {
     exerrval = ncerr;
     sprintf(errmsg,
     "Error: failed to get number of dist factors in %s set %d in file id %d",
             typeName, set_id,exoid);
     ex_err("ex_get_set_dist_fact",errmsg,exerrval);
     return (EX_FATAL);
   }


   if ((dist_id = ncvarid (exoid, factptr)) == -1)
   {
     exerrval = ncerr;
     /* not an error for node sets because this is how we check that df's exist */
     if (set_type == EX_NODE_SET)
     {
       sprintf(errmsg,
	       "Warning: dist factors not stored for %s set %d in file id %d",
	       typeName, set_id, exoid);
       ex_err("ex_get_set_dist_fact",errmsg,exerrval);
       return (EX_WARN);         /* complain - but not too loud */
     }
     /* is an error for other sets */
     else 
     {
       sprintf(errmsg,
	       "Error: failed to locate dist factors list for %s set %d in file id %d",
	       typeName, set_id,exoid);
       ex_err("ex_get_set_dist_fact",errmsg,exerrval);
       return (EX_FATAL);
     }
   }


/* read in the distribution factors array */

   start[0] = 0;

   count[0] = num_df_in_set;

   if (ncvarget (exoid, dist_id, start, count,
             ex_conv_array(exoid,RTN_ADDRESS,set_dist_fact,
                           (int)num_df_in_set)) == -1)
   {
     exerrval = ncerr;
     sprintf(errmsg,
         "Error: failed to get dist factors list for %s set %d in file id %d",
             typeName, set_id,exoid);
     ex_err("ex_get_set_dist_fact",errmsg,exerrval);
     return (EX_FATAL);
   }


   ex_conv_array( exoid, READ_CONVERT, set_dist_fact, num_df_in_set );

   return (EX_NOERR);

}
int ex_get_set_param (int  exoid,
		      ex_entity_type set_type, 
		      int  set_id,
		      int *num_entry_in_set, 
		      int *num_dist_fact_in_set)
{
  int status;
  int varid, dimid, set_id_ndx;
  size_t lnum_entry_in_set;
  size_t lnum_dist_fact_in_set;
  char errmsg[MAX_ERR_LENGTH];
  char* numentryptr = NULL;
  char* numdfptr = NULL;

  exerrval = 0; /* clear error code */


  /* first check if any sets are specified */
  if ((status = nc_inq_dimid(exoid, ex_dim_num_objects(set_type), &dimid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Warning: no %ss stored in file id %d",
	    ex_name_of_object(set_type), exoid);
    ex_err("ex_get_set_param",errmsg,exerrval);
    return (EX_WARN);
  }

  /* Lookup index of set id in VAR_*S_IDS array */
  set_id_ndx = ex_id_lkup(exoid,set_type,set_id);
  if (exerrval != 0) {
    if (exerrval == EX_NULLENTITY)     /* NULL set? */
      {
	*num_entry_in_set = 0;
	*num_dist_fact_in_set = 0;
	return (EX_NOERR);
      } else {
      sprintf(errmsg,
	      "Error: failed to locate %s id %d in id array in file id %d",
	      ex_name_of_object(set_type), set_id,exoid);
      ex_err("ex_get_set_param",errmsg,exerrval);
      return (EX_FATAL);
    }
  }

  /* setup more pointers based on set_type */
  if (set_type == EX_NODE_SET) {
    numentryptr = DIM_NUM_NOD_NS(set_id_ndx);
    /* note we are using DIM_NUM_NODE_NS instead of DIM_NUM_DF_NS */
    numdfptr = DIM_NUM_NOD_NS(set_id_ndx);
  }
  else if (set_type == EX_EDGE_SET) {
    numentryptr = DIM_NUM_EDGE_ES(set_id_ndx);
    numdfptr = DIM_NUM_DF_ES(set_id_ndx);
  }
  else if (set_type == EX_FACE_SET) {
    numentryptr = DIM_NUM_FACE_FS(set_id_ndx);
    numdfptr = DIM_NUM_DF_FS(set_id_ndx);
  }
  else if (set_type == EX_SIDE_SET) {
    numentryptr = DIM_NUM_SIDE_SS(set_id_ndx);
    numdfptr = DIM_NUM_DF_SS(set_id_ndx);
  }
  if (set_type == EX_ELEM_SET) {
    numentryptr = DIM_NUM_ELE_ELS(set_id_ndx);
    numdfptr = DIM_NUM_DF_ELS(set_id_ndx);
  }

  /* inquire values of dimension for number of entities in set */
  if (ex_get_dimension(exoid, numentryptr,"entries", &lnum_entry_in_set,
		       &dimid, "ex_get_set_param") != NC_NOERR)
    return EX_FATAL;
  *num_entry_in_set = lnum_entry_in_set;

  /* Inquire value of dimension of number of dist factors for this set. 
     NOTE: For node sets, because DIM_NUM_DF_NS is not used, we check to see
     if the dist factor variable for a node set index exits. If it does not,
     the dist factor count is assumed to be zero, otherwise the dist factor 
     count will be the same as the number of nodes in the set. */

  if (set_type == EX_NODE_SET) {
    if ((status = nc_inq_varid(exoid, VAR_FACT_NS(set_id_ndx), &varid)) != NC_NOERR) {
      *num_dist_fact_in_set = 0;        /* signal dist factor doesn't exist */
      if (status == NC_ENOTVAR)
	return (EX_NOERR);
      else {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to locate the dist factors for %s %d in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_get_set_param",errmsg,exerrval);
	return (EX_FATAL);
      }
    }
    *num_dist_fact_in_set = lnum_entry_in_set;   /* # of df = # of nodes */
  }
  else {/* all other set types */
    if ((status = nc_inq_dimid(exoid, numdfptr, &dimid)) != NC_NOERR) {
      *num_dist_fact_in_set = 0; /* no distribution factors for this set*/
      if (status == NC_EBADDIM)
	return (EX_NOERR);
      else {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to locate number of dist factors in %s %d in file id %d",
		ex_name_of_object(set_type), set_id, exoid);
	ex_err("ex_get_set_param",errmsg,exerrval);
	return (EX_FATAL);
      }
    }

    if ((status = nc_inq_dimlen(exoid, dimid, &lnum_dist_fact_in_set)) != NC_NOERR) {
      exerrval = status;
      sprintf(errmsg,
	      "Error: failed to get number of dist factors in %s %d in file id %d",
	      ex_name_of_object(set_type), set_id, exoid);
      ex_err("ex_get_set_param",errmsg,exerrval);
      return (EX_FATAL);
    }
    *num_dist_fact_in_set = lnum_dist_fact_in_set;
  }

  return (EX_NOERR);
}
示例#5
0
int ex_put_concat_sets (int   exoid,
			ex_entity_type set_type,
			const struct ex_set_specs* set_specs)
{
  int status;
  int temp;
  const void_int  *num_entries_per_set = set_specs->num_entries_per_set;
  const void_int  *num_dist_per_set = set_specs->num_dist_per_set;
  const void_int  *sets_entry_index = set_specs->sets_entry_index;
  const void_int  *sets_dist_index = set_specs->sets_dist_index;
  const void *sets_dist_fact = set_specs->sets_dist_fact;
  size_t i, num_df, num_entry;
  int cur_num_sets, num_sets;
  int dimid, varid, set_id_ndx, dims[1];
  int  *set_stat = NULL;
  int set_int_type, int_size;

  const float *flt_dist_fact = NULL;
  const double *dbl_dist_fact = NULL;
  char errmsg[MAX_ERR_LENGTH];
  char* idsptr = NULL;
  char* statptr = NULL;
  char* numdfptr = NULL;
  char* factptr = NULL;
  char* elemptr = NULL;
  char* extraptr = NULL;
  ex_inquiry ex_inq_val;

  exerrval = 0; /* clear error code */

  int_size = sizeof(int);
  if (ex_int64_status(exoid) & EX_BULK_INT64_API) {
    int_size = sizeof(int64_t);
  }
  
  /* setup pointers based on set_type 
     NOTE: there is another block that sets more stuff later ... */

  if (set_type == EX_NODE_SET) {
    ex_inq_val = EX_INQ_NODE_SETS;
    idsptr = VAR_NS_IDS;
    statptr = VAR_NS_STAT;
  }
  else if (set_type == EX_EDGE_SET) {
    ex_inq_val = EX_INQ_EDGE_SETS;
    idsptr = VAR_ES_IDS;
    statptr = VAR_ES_STAT;
  }
  else if (set_type == EX_FACE_SET) {
    ex_inq_val = EX_INQ_FACE_SETS;
    idsptr = VAR_FS_IDS;
    statptr = VAR_FS_STAT;
  }
  else if (set_type == EX_SIDE_SET) {
    ex_inq_val = EX_INQ_SIDE_SETS;
    idsptr = VAR_SS_IDS;
    statptr = VAR_SS_STAT;
  }
  else if (set_type == EX_ELEM_SET) {
    ex_inq_val = EX_INQ_ELEM_SETS;
    idsptr = VAR_ELS_IDS;
    statptr = VAR_ELS_STAT;
  }
  else {
    exerrval = EX_FATAL;
    sprintf(errmsg,
	    "Error: invalid set type (%d)", set_type);
    ex_err("ex_put_set_param",errmsg,exerrval);
    return (EX_FATAL);
  }

  /* first check if any sets are specified */
  if ((status = nc_inq_dimid(exoid, ex_dim_num_objects(set_type), &temp)) != NC_NOERR) {
    if (status == NC_EBADDIM) {
      exerrval = status;
      sprintf(errmsg,
	      "Error: no %ss defined for file id %d", ex_name_of_object(set_type), exoid);
      ex_err("ex_put_concat_sets",errmsg,exerrval);
    } else {
      exerrval = status;
      sprintf(errmsg,
	      "Error: failed to locate %ss defined in file id %d",
	      ex_name_of_object(set_type), exoid);
      ex_err("ex_put_concat_sets",errmsg,exerrval);
    }
    return (EX_FATAL);
  }
   
  /* inquire how many sets are to be stored */
  num_sets = ex_inquire_int(exoid, ex_inq_val);
  if (num_sets < 0) {
    sprintf(errmsg,
	    "Error: failed to get number of %ss defined for file id %d",
	    ex_name_of_object(set_type), exoid);
    /* use error val from inquire */
    ex_err("ex_put_concat_sets",errmsg,exerrval);
    return (EX_FATAL);
  }

  /* Fill out set status array */

  /* First, allocate space for the status list */
  if (!(set_stat= malloc(num_sets*sizeof(int)))) {
    exerrval = EX_MEMFAIL;
    sprintf(errmsg,
	    "Error: failed to allocate space for %s status array in file id %d",
	    ex_name_of_object(set_type), exoid);
    ex_err("ex_put_concat_sets",errmsg,exerrval);
    return (EX_FATAL);
  }

  if (int_size == sizeof(int64_t)) {
    for (i=0;i<num_sets;i++)  {
      set_stat[i] = (((int64_t*)num_entries_per_set)[i] == 0) ? 0 : 1;
    }
  } else {
    for (i=0;i<num_sets;i++)  {
      set_stat[i] = (((int*)num_entries_per_set)[i] == 0) ? 0 : 1;
    }
  }

  /* Next, get variable id of status array */
  if ((status = nc_inq_varid(exoid, statptr, &varid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to locate %s status in file id %d", 
	    ex_name_of_object(set_type), exoid);
    ex_err("ex_put_concat_sets",errmsg,exerrval);
    ex_safe_free(set_stat);
    return (EX_FATAL);
  }

  status = nc_put_var_int(exoid, varid, set_stat);

  if (status != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to store %s status array to file id %d",
	    ex_name_of_object(set_type), exoid);
    ex_err("ex_put_concat_set",errmsg,exerrval);
    ex_safe_free(set_stat);
    return (EX_FATAL);
  }

  /* put netcdf file into define mode  */
  if ((status = nc_redef (exoid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to put file id %d into define mode",
	    exoid);
    ex_err("ex_put_concat_sets",errmsg,exerrval);
    ex_safe_free(set_stat);
    return (EX_FATAL);
  }

  /* create set definitions */
  for (i=0; i<num_sets; i++) {
    int64_t set_id;
    if (ex_int64_status(exoid) & EX_IDS_INT64_API) {
      set_id = ((int64_t*)set_specs->sets_ids)[i];
    } else {
      set_id = ((int*)set_specs->sets_ids)[i];
    }

    /* Keep track of the total number of sets defined using a counter stored
       in a linked list keyed by exoid.
       NOTE: ex_get_file_item  is used to find the number of sets of type
       for a specific file and returns that value.
    */
    cur_num_sets=ex_get_file_item(exoid, ex_get_counter_list(set_type));
    if (cur_num_sets >= num_sets) {
      exerrval = EX_FATAL;
      sprintf(errmsg,
	      "Error: exceeded number of %ss (%d) defined in file id %d",
	      ex_name_of_object(set_type), num_sets,exoid);
      ex_err("ex_put_concat_sets",errmsg,exerrval);
      goto error_ret;
    }

    /*   NOTE: ex_inc_file_item  is used to find the number of sets
	 for a specific file and returns that value incremented. */

    cur_num_sets=ex_inc_file_item(exoid, ex_get_counter_list(set_type));
    set_id_ndx = cur_num_sets + 1;
    
    /* setup more pointers based on set_type */
    if (set_type == EX_NODE_SET) {
      elemptr = VAR_NODE_NS(set_id_ndx);
      extraptr = NULL;
      /* note we are using DIM_NUM_NODE_NS instead of DIM_NUM_DF_NS */
      numdfptr = DIM_NUM_NOD_NS(set_id_ndx);
      factptr = VAR_FACT_NS(set_id_ndx);
    }
    else if (set_type == EX_EDGE_SET) {
      elemptr = VAR_EDGE_ES(set_id_ndx);
      extraptr = VAR_ORNT_ES(set_id_ndx);
      numdfptr = DIM_NUM_DF_ES(set_id_ndx);
      factptr = VAR_FACT_ES(set_id_ndx);
    }
    else if (set_type == EX_FACE_SET) {
      elemptr = VAR_FACE_FS(set_id_ndx);
      extraptr = VAR_ORNT_FS(set_id_ndx);
      numdfptr = DIM_NUM_DF_FS(set_id_ndx);
      factptr = VAR_FACT_FS(set_id_ndx);
    }
    else if (set_type == EX_SIDE_SET) {
      elemptr = VAR_ELEM_SS(set_id_ndx);
      extraptr = VAR_SIDE_SS(set_id_ndx);
      numdfptr = DIM_NUM_DF_SS(set_id_ndx);
      factptr = VAR_FACT_SS(set_id_ndx);
    }
    if (set_type == EX_ELEM_SET) {
      elemptr = VAR_ELEM_ELS(set_id_ndx);
      extraptr = NULL;
      numdfptr = DIM_NUM_DF_ELS(set_id_ndx);
      factptr = VAR_FACT_ELS(set_id_ndx);
    }

    /*  define dimension for number of entries per set */
    if (set_stat[i] == 0) /* Is this a NULL set? */
      continue; /* Do not create anything for NULL sets! */

    if (int_size == sizeof(int)) {
      status = nc_def_dim(exoid, ex_dim_num_entries_in_object(set_type, set_id_ndx),
			  ((int*)num_entries_per_set)[i], &dimid);
    } else {
      status = nc_def_dim(exoid, ex_dim_num_entries_in_object(set_type, set_id_ndx),
			  ((int64_t*)num_entries_per_set)[i], &dimid);
    }
    
    if (status != NC_NOERR) {
      if (status == NC_ENAMEINUSE) {
	exerrval = status;
	sprintf(errmsg,
		"Error: %s entry count %"PRId64" already defined in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_concat_sets",errmsg,exerrval);
      } else {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to define number of entries for %s %"PRId64" in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_concat_sets",errmsg,exerrval);
      }
      goto error_ret;
    }

    /* create element list variable for set */
    set_int_type = NC_INT;
    if (ex_int64_status(exoid) & EX_BULK_INT64_DB) {
      set_int_type = NC_INT64;
    }

    dims[0] = dimid;
    if ((status = nc_def_var(exoid,elemptr,set_int_type,1,dims, &temp)) != NC_NOERR) {
      if (status == NC_ENAMEINUSE) {
	exerrval = status;
	sprintf(errmsg,
		"Error: element list already exists for %s %"PRId64" in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_concat_sets",errmsg,exerrval);
      } else {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to create element list for %s %"PRId64" in file id %d",
		ex_name_of_object(set_type), set_id,exoid);
	ex_err("ex_put_concat_sets",errmsg,exerrval);
      }
      goto error_ret;            /* exit define mode and return */
    }
    ex_compress_variable(exoid, temp, 1);

    /* create extra list variable for set  (only for edge, face and side sets) */
    if (extraptr) {
      if ((status = nc_def_var(exoid,extraptr,set_int_type,1,dims, &temp)) != NC_NOERR) { 
	if (status == NC_ENAMEINUSE) {
	  exerrval = status;
	  sprintf(errmsg,
		  "Error: extra list already exists for %s %"PRId64" in file id %d",
		  ex_name_of_object(set_type), set_id,exoid);
	  ex_err("ex_put_concat_sets",errmsg,exerrval);
	} else {
	  exerrval = status;
	  sprintf(errmsg,
		  "Error: failed to create extra list for %s %"PRId64" in file id %d",
		  ex_name_of_object(set_type), set_id,exoid);
	  ex_err("ex_put_concat_sets",errmsg,exerrval);
	}
	goto error_ret;         /* exit define mode and return */
      }
      ex_compress_variable(exoid, temp, 1);
    }

    /*  define dimension for number of dist factors per set */
    /*  NOTE: only define df count if the dist factors exist! */
    if (int_size == sizeof(int64_t)) {
      num_df = ((int64_t*)num_dist_per_set)[i];
      num_entry = ((int64_t*)num_entries_per_set)[i];
    } else {
      num_df = ((int*)num_dist_per_set)[i];
      num_entry = ((int*)num_entries_per_set)[i];
    }

    if (num_df > 0) {
      
      if (set_type == EX_NODE_SET) {
	if (num_df != num_entry) {
	  exerrval = EX_FATAL;
	  sprintf(errmsg,
		  "Error: # dist fact (%"ST_ZU") not equal to # nodes (%"ST_ZU") in node set %"PRId64" file id %d",
		  num_df, num_entry, set_id,exoid);
	  ex_err("ex_put_concat_sets",errmsg,exerrval);
	  goto error_ret;          /* exit define mode and return */
	}

	/* resuse dimid from entry lists */
      } else  {
	if ((status = nc_def_dim(exoid, numdfptr,
				 num_df, &dimid)) != NC_NOERR) {
	  if (status == NC_ENAMEINUSE) {
	    exerrval = status;
	    sprintf(errmsg,
		    "Error: %s df count %"PRId64" already defined in file id %d",
		    ex_name_of_object(set_type), set_id,exoid);
	    ex_err("ex_put_concat_sets",errmsg,exerrval);
	  } else {
	    exerrval = status;
	    sprintf(errmsg,
		    "Error: failed to define %s df count for set %"PRId64" in file id %d",
		    ex_name_of_object(set_type), set_id,exoid);
	    ex_err("ex_put_concat_sets",errmsg,exerrval);
	  }
	  goto error_ret;
	}
      }

      /* create distribution factor list variable for set */
      dims[0] = dimid;
      if ((status = nc_def_var(exoid, factptr, nc_flt_code(exoid), 1, dims, &temp)) != NC_NOERR) {
	if (status == NC_ENAMEINUSE) {
	  exerrval = status;
	  sprintf(errmsg,
		  "Error: dist factor list already exists for %s %"PRId64" in file id %d",
		  ex_name_of_object(set_type), set_id,exoid);
	  ex_err("ex_put_concat_sets",errmsg,exerrval);
	} else {
	  exerrval = status;
	  sprintf(errmsg,
		  "Error: failed to create dist factor list for %s %"PRId64" in file id %d",
		  ex_name_of_object(set_type), set_id,exoid);
	  ex_err("ex_put_concat_sets",errmsg,exerrval);
	}
	goto error_ret;            /* exit define mode and return */
      }
      ex_compress_variable(exoid, temp, 2);
    } /* end define dist factors */
  }

  /* leave define mode  */
  if ((status = nc_enddef (exoid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to complete definition in file id %d",
	    exoid);
    ex_err("ex_put_concat_sets",errmsg,exerrval);
    ex_safe_free(set_stat);
    return (EX_FATAL);
  }

  /* Next, fill out set ids array */

  /* first get id of set ids array variable */
  if ((status = nc_inq_varid(exoid, idsptr, &varid)) != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to locate %s ids array in file id %d",
	    ex_name_of_object(set_type), exoid);
    ex_err("ex_put_concat_sets",errmsg,exerrval);
    ex_safe_free(set_stat);
    return (EX_FATAL);
  }

  /* then, write out set id list */
  if (ex_int64_status(exoid) & EX_IDS_INT64_API) {
    status = nc_put_var_longlong(exoid, varid, set_specs->sets_ids);
  } else {
    status = nc_put_var_int(exoid, varid, set_specs->sets_ids);
  }

  if (status != NC_NOERR) {
    exerrval = status;
    sprintf(errmsg,
	    "Error: failed to store %s id array in file id %d",
	    ex_name_of_object(set_type), exoid);
    ex_err("ex_put_concat_sets",errmsg,exerrval);
    ex_safe_free(set_stat);
    return (EX_FATAL);
  }

  /* If the sets_entry_index is passed in as a NULL pointer, then
   *  the user only wants us to define the sets and not populate
   *  the data structures.
   */
  if (sets_entry_index == 0) {
    ex_safe_free(set_stat);
    return(EX_NOERR);
  }
  
  /* Now, use ExodusII call to store sets */
  for (i=0; i<num_sets; i++) {
    int64_t set_id;
    size_t df_ndx;
    
    if (set_stat[i] == 0) /* Is this a NULL set? */
      continue; /* Do not create anything for NULL sets! */

    if (ex_int64_status(exoid) & EX_IDS_INT64_API) {
      set_id = ((int64_t*)set_specs->sets_ids)[i];
    } else {
      set_id = ((int*)set_specs->sets_ids)[i];
    }

    if (ex_int64_status(exoid) & EX_BULK_INT64_API) {
      int64_t* extra_list = NULL;
      /* set extra list */
      if (set_type == EX_EDGE_SET || set_type == EX_FACE_SET || set_type == EX_SIDE_SET)
	extra_list = &(((int64_t*)set_specs->sets_extra_list)[((int64_t*)sets_entry_index)[i]]);
      
      status = ex_put_set(exoid, set_type, set_id, 
			  &(((int64_t*)set_specs->sets_entry_list)[((int64_t*)sets_entry_index)[i]]),
			  extra_list);
    } else {
      int* extra_list = NULL;
      /* set extra list */
      if (set_type == EX_EDGE_SET || set_type == EX_FACE_SET || set_type == EX_SIDE_SET)
	extra_list = &(((int*)set_specs->sets_extra_list)[((int*)sets_entry_index)[i]]);
      
      status = ex_put_set(exoid, set_type, set_id, 
			  &(((int*)set_specs->sets_entry_list)[((int*)sets_entry_index)[i]]),
			  extra_list);
    }
    if (status != NC_NOERR) {
      ex_safe_free(set_stat);
      return(EX_FATAL); /* error will be reported by subroutine */
    }

    if (int_size == sizeof(int)) {
      num_df = ((int*)num_dist_per_set)[i];
      df_ndx = ((int*)sets_dist_index)[i];
    } else {
      num_df = ((int64_t*)num_dist_per_set)[i];
      df_ndx = ((int64_t*)sets_dist_index)[i];
    }

    if (ex_comp_ws(exoid) == sizeof(float)) {
      flt_dist_fact = sets_dist_fact;
      if (num_df > 0) {     /* store dist factors if required */
	if (ex_put_set_dist_fact(exoid, set_type, set_id,
				 &(flt_dist_fact[df_ndx])) == -1) {
	  sprintf(errmsg,
		  "Error: failed to store %s %"PRId64" dist factors for file id %d",
		  ex_name_of_object(set_type), set_id,exoid);
	  /* use error val from exodusII routine */
	  ex_err("ex_put_concat_sets",errmsg,exerrval);
	  ex_safe_free(set_stat);
	  return (EX_FATAL);
	}
      }
    } else if (ex_comp_ws(exoid) == sizeof(double)) {
      dbl_dist_fact = sets_dist_fact;
      if (num_df) {             /* only store if they exist */
	if (ex_put_set_dist_fact(exoid, set_type, set_id,
				 &(dbl_dist_fact[df_ndx])) == -1) {
	  sprintf(errmsg,
		  "Error: failed to store %s %"PRId64" dist factors for file id %d",
		  ex_name_of_object(set_type), set_id,exoid);
	  /* use error val from exodusII routine */
	  ex_err("ex_put_concat_sets",errmsg,exerrval);
	  ex_safe_free(set_stat);
	  return (EX_FATAL);
	}
      }
    } else {
      /* unknown floating point word size */
      exerrval = EX_BADPARAM;
      sprintf(errmsg,
	      "Error: unsupported floating point word size %d for file id %d",
	      ex_comp_ws(exoid), exoid);
      ex_err("ex_put_concat_sets", errmsg, exerrval);
      ex_safe_free(set_stat);
      return (EX_FATAL);
    }
  }
  ex_safe_free(set_stat);
  return(EX_NOERR);


  /* Fatal error: exit definition mode and return */
 error_ret:
  ex_safe_free(set_stat);

  if (nc_enddef (exoid) != NC_NOERR)     /* exit define mode */
    {
      sprintf(errmsg,
	      "Error: failed to complete definition for file id %d",
	      exoid);
      ex_err("ex_put_concat_sets",errmsg,exerrval);
    }
  return (EX_FATAL);
}