static bool edbm_bevel_calc(wmOperator *op)
{
BevelData *opdata = op->customdata;
BMEditMesh *em = opdata->em;
BMOperator bmop;
const float offset = RNA_float_get(op->ptr, "offset");
const int offset_type = RNA_enum_get(op->ptr, "offset_type");
const int segments = RNA_int_get(op->ptr, "segments");
const float profile = RNA_float_get(op->ptr, "profile");
const bool vertex_only = RNA_boolean_get(op->ptr, "vertex_only");
const bool clamp_overlap = RNA_boolean_get(op->ptr, "clamp_overlap");
int material = RNA_int_get(op->ptr, "material");
const bool loop_slide = RNA_boolean_get(op->ptr, "loop_slide");
/* revert to original mesh */
if (opdata->is_modal) {
EDBM_redo_state_restore(opdata->mesh_backup, em, false);
}
if (em->ob) {
material = CLAMPIS(material, -1, em->ob->totcol - 1);
}
EDBM_op_init(em, &bmop, op,
"bevel geom=%hev offset=%f segments=%i vertex_only=%b offset_type=%i profile=%f clamp_overlap=%b "
"material=%i loop_slide=%b",
BM_ELEM_SELECT, offset, segments, vertex_only, offset_type, profile,
clamp_overlap, material, loop_slide);
BMO_op_exec(em->bm, &bmop);
if (offset != 0.0f) {
/* not essential, but we may have some loose geometry that
* won't get bevel'd and better not leave it selected */
EDBM_flag_disable_all(em, BM_ELEM_SELECT);
BMO_slot_buffer_hflag_enable(em->bm, bmop.slots_out, "faces.out", BM_FACE, BM_ELEM_SELECT, true);
}
/* no need to de-select existing geometry */
if (!EDBM_op_finish(em, &bmop, op, true)) {
return false;
}
EDBM_mesh_normals_update(opdata->em);
EDBM_update_generic(opdata->em, true, true);
return true;
}
static bool edbm_inset_calc(wmOperator *op)
{
InsetData *opdata;
BMEditMesh *em;
BMOperator bmop;
const bool use_boundary = RNA_boolean_get(op->ptr, "use_boundary");
const bool use_even_offset = RNA_boolean_get(op->ptr, "use_even_offset");
const bool use_relative_offset = RNA_boolean_get(op->ptr, "use_relative_offset");
const bool use_edge_rail = RNA_boolean_get(op->ptr, "use_edge_rail");
const float thickness = RNA_float_get(op->ptr, "thickness");
const float depth = RNA_float_get(op->ptr, "depth");
const bool use_outset = RNA_boolean_get(op->ptr, "use_outset");
const bool use_select_inset = RNA_boolean_get(op->ptr, "use_select_inset"); /* not passed onto the BMO */
const bool use_individual = RNA_boolean_get(op->ptr, "use_individual");
const bool use_interpolate = RNA_boolean_get(op->ptr, "use_interpolate");
opdata = op->customdata;
em = opdata->em;
if (opdata->is_modal) {
EDBM_redo_state_restore(opdata->mesh_backup, em, false);
}
if (use_individual) {
EDBM_op_init(em, &bmop, op,
"inset_individual faces=%hf use_even_offset=%b use_relative_offset=%b "
"use_interpolate=%b thickness=%f depth=%f",
BM_ELEM_SELECT, use_even_offset, use_relative_offset, use_interpolate,
thickness, depth);
}
else {
EDBM_op_init(em, &bmop, op,
"inset_region faces=%hf use_boundary=%b use_even_offset=%b use_relative_offset=%b "
"use_interpolate=%b thickness=%f depth=%f use_outset=%b use_edge_rail=%b",
BM_ELEM_SELECT, use_boundary, use_even_offset, use_relative_offset, use_interpolate,
thickness, depth, use_outset, use_edge_rail);
if (use_outset) {
BMO_slot_buffer_from_enabled_hflag(em->bm, &bmop, bmop.slots_in, "faces_exclude", BM_FACE, BM_ELEM_HIDDEN);
}
}
BMO_op_exec(em->bm, &bmop);
if (use_select_inset) {
/* deselect original faces/verts */
EDBM_flag_disable_all(em, BM_ELEM_SELECT);
BMO_slot_buffer_hflag_enable(em->bm, bmop.slots_out, "faces.out", BM_FACE, BM_ELEM_SELECT, true);
}
else {
EDBM_flag_disable_all(em, BM_ELEM_SELECT);
BMO_slot_buffer_hflag_enable(em->bm, bmop.slots_in, "faces", BM_FACE, BM_ELEM_SELECT, true);
}
if (!EDBM_op_finish(em, &bmop, op, true)) {
return false;
}
else {
EDBM_update_generic(em, true, true);
return true;
}
}
static bool edbm_bevel_calc(wmOperator *op)
{
BevelData *opdata = op->customdata;
BMEditMesh *em;
BMOperator bmop;
bool changed = false;
const float offset = get_bevel_offset(op);
const int offset_type = RNA_enum_get(op->ptr, "offset_type");
const int segments = RNA_int_get(op->ptr, "segments");
const float profile = RNA_float_get(op->ptr, "profile");
const bool vertex_only = RNA_boolean_get(op->ptr, "vertex_only");
const bool clamp_overlap = RNA_boolean_get(op->ptr, "clamp_overlap");
int material = RNA_int_get(op->ptr, "material");
const bool loop_slide = RNA_boolean_get(op->ptr, "loop_slide");
const bool mark_seam = RNA_boolean_get(op->ptr, "mark_seam");
const bool mark_sharp = RNA_boolean_get(op->ptr, "mark_sharp");
const bool harden_normals = RNA_boolean_get(op->ptr, "harden_normals");
const int face_strength_mode = RNA_enum_get(op->ptr, "face_strength_mode");
const int miter_outer = RNA_enum_get(op->ptr, "miter_outer");
const int miter_inner = RNA_enum_get(op->ptr, "miter_inner");
const float spread = RNA_float_get(op->ptr, "spread");
for (uint ob_index = 0; ob_index < opdata->ob_store_len; ob_index++) {
em = opdata->ob_store[ob_index].em;
/* revert to original mesh */
if (opdata->is_modal) {
EDBM_redo_state_restore(opdata->ob_store[ob_index].mesh_backup, em, false);
}
if (em->ob) {
material = CLAMPIS(material, -1, em->ob->totcol - 1);
}
Mesh *me = em->ob->data;
if (harden_normals && !(me->flag & ME_AUTOSMOOTH)) {
/* harden_normals only has a visible effect if autosmooth is on, so turn it on */
me->flag |= ME_AUTOSMOOTH;
}
EDBM_op_init(em,
&bmop,
op,
"bevel geom=%hev offset=%f segments=%i vertex_only=%b offset_type=%i profile=%f "
"clamp_overlap=%b material=%i loop_slide=%b mark_seam=%b mark_sharp=%b "
"harden_normals=%b face_strength_mode=%i "
"miter_outer=%i miter_inner=%i spread=%f smoothresh=%f",
BM_ELEM_SELECT,
offset,
segments,
vertex_only,
offset_type,
profile,
clamp_overlap,
material,
loop_slide,
mark_seam,
mark_sharp,
harden_normals,
face_strength_mode,
miter_outer,
miter_inner,
spread,
me->smoothresh);
BMO_op_exec(em->bm, &bmop);
if (offset != 0.0f) {
/* not essential, but we may have some loose geometry that
* won't get bevel'd and better not leave it selected */
EDBM_flag_disable_all(em, BM_ELEM_SELECT);
BMO_slot_buffer_hflag_enable(
em->bm, bmop.slots_out, "faces.out", BM_FACE, BM_ELEM_SELECT, true);
}
/* no need to de-select existing geometry */
if (!EDBM_op_finish(em, &bmop, op, true)) {
continue;
}
EDBM_mesh_normals_update(em);
EDBM_update_generic(em, true, true);
changed = true;
}
return changed;
}
static int mesh_bisect_exec(bContext *C, wmOperator *op)
{
Scene *scene = CTX_data_scene(C);
/* both can be NULL, fallbacks values are used */
View3D *v3d = CTX_wm_view3d(C);
RegionView3D *rv3d = ED_view3d_context_rv3d(C);
Object *obedit = CTX_data_edit_object(C);
BMEditMesh *em = BKE_editmesh_from_object(obedit);
BMesh *bm;
BMOperator bmop;
float plane_co[3];
float plane_no[3];
float imat[4][4];
const float thresh = RNA_float_get(op->ptr, "threshold");
const bool use_fill = RNA_boolean_get(op->ptr, "use_fill");
const bool clear_inner = RNA_boolean_get(op->ptr, "clear_inner");
const bool clear_outer = RNA_boolean_get(op->ptr, "clear_outer");
PropertyRNA *prop_plane_co;
PropertyRNA *prop_plane_no;
prop_plane_co = RNA_struct_find_property(op->ptr, "plane_co");
if (RNA_property_is_set(op->ptr, prop_plane_co)) {
RNA_property_float_get_array(op->ptr, prop_plane_co, plane_co);
}
else {
copy_v3_v3(plane_co, ED_view3d_cursor3d_get(scene, v3d));
RNA_property_float_set_array(op->ptr, prop_plane_co, plane_co);
}
prop_plane_no = RNA_struct_find_property(op->ptr, "plane_no");
if (RNA_property_is_set(op->ptr, prop_plane_no)) {
RNA_property_float_get_array(op->ptr, prop_plane_no, plane_no);
}
else {
if (rv3d) {
copy_v3_v3(plane_no, rv3d->viewinv[1]);
}
else {
/* fallback... */
plane_no[0] = plane_no[1] = 0.0f; plane_no[2] = 1.0f;
}
RNA_property_float_set_array(op->ptr, prop_plane_no, plane_no);
}
/* -------------------------------------------------------------------- */
/* Modal support */
/* Note: keep this isolated, exec can work wihout this */
if ((op->customdata != NULL) &&
mesh_bisect_interactive_calc(C, op, em, plane_co, plane_no))
{
/* write back to the props */
RNA_property_float_set_array(op->ptr, prop_plane_no, plane_no);
RNA_property_float_set_array(op->ptr, prop_plane_co, plane_co);
}
/* End Modal */
/* -------------------------------------------------------------------- */
bm = em->bm;
invert_m4_m4(imat, obedit->obmat);
mul_m4_v3(imat, plane_co);
mul_mat3_m4_v3(imat, plane_no);
EDBM_op_init(em, &bmop, op,
"bisect_plane geom=%hvef plane_co=%v plane_no=%v dist=%f clear_inner=%b clear_outer=%b",
BM_ELEM_SELECT, plane_co, plane_no, thresh, clear_inner, clear_outer);
BMO_op_exec(bm, &bmop);
EDBM_flag_disable_all(em, BM_ELEM_SELECT);
if (use_fill) {
float normal_fill[3];
BMOperator bmop_fill;
BMOperator bmop_attr;
normalize_v3_v3(normal_fill, plane_no);
if (clear_outer == true && clear_inner == false) {
negate_v3(normal_fill);
}
/* Fill */
BMO_op_initf(
bm, &bmop_fill, op->flag,
"triangle_fill edges=%S normal=%v use_dissolve=%b",
&bmop, "geom_cut.out", normal_fill, true);
BMO_op_exec(bm, &bmop_fill);
/* Copy Attributes */
BMO_op_initf(bm, &bmop_attr, op->flag,
"face_attribute_fill faces=%S use_normals=%b use_data=%b",
&bmop_fill, "geom.out", false, true);
BMO_op_exec(bm, &bmop_attr);
BMO_slot_buffer_hflag_enable(bm, bmop_fill.slots_out, "geom.out", BM_FACE, BM_ELEM_SELECT, true);
BMO_op_finish(bm, &bmop_attr);
BMO_op_finish(bm, &bmop_fill);
}
BMO_slot_buffer_hflag_enable(bm, bmop.slots_out, "geom_cut.out", BM_VERT | BM_EDGE, BM_ELEM_SELECT, true);
if (!EDBM_op_finish(em, &bmop, op, true)) {
return OPERATOR_CANCELLED;
}
else {
EDBM_update_generic(em, true, true);
EDBM_selectmode_flush(em);
return OPERATOR_FINISHED;
}
}
