C++ (Cpp) EXYNOS4212_GPM0示例

示例#1

0

显示文件

文件： setup-fb-s5p.c 项目： sdemills/SM-V700

int s3cfb_lcd_off(struct platform_device *pdev)
{
	gpio_set_value(EXYNOS4212_GPM0(1), GPIO_LEVEL_LOW);
	mdelay(200);

	/*  LVDS_N_SHDN to low */
	gpio_set_value(EXYNOS4212_GPM0(5), GPIO_LEVEL_LOW);
	msleep(40);

	gpio_set_value(EXYNOS4_GPC0(1), GPIO_LEVEL_LOW);
	msleep(400);

	return 0;
}

示例#2

0

显示文件

文件： setup-fimc0.c 项目： 1fastgtp/Note2_Kernel_t0lte

void s3c_fimc0_cfg_gpio(struct platform_device *pdev)
{
#if defined(CONFIG_MACH_SMDK4212) || defined(CONFIG_MACH_SMDK4210) \
	|| defined(CONFIG_VIDEO_S5K5BBGX)
	if (soc_is_exynos4210()) {
		/* CAM A port(b0010) : PCLK, VSYNC, HREF, DATA[0-4] */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ0(0), 8,
					S3C_GPIO_SFN(2));
		/* CAM A port(b0010) : DATA[5-7], CLKOUT(MIPI CAM also),
		* FIELD */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ1(0), 5,
					S3C_GPIO_SFN(2));
#if !defined(CONFIG_MACH_P8LTE) || !defined(CONFIG_VIDEO_S5K5BBGX)
		/* CAM B port(b0011) : DATA[0-7] */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPE1(0), 8,
					S3C_GPIO_SFN(3));
		/* CAM B port(b0011) : PCLK, VSYNC, HREF, FIELD, CLKOUT */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPE0(0), 5,
					S3C_GPIO_SFN(3));
#endif
	} else {
		/* CAM A port(b0010) : PCLK, VSYNC, HREF, DATA[0-4] */
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPJ0(0), 8,
					S3C_GPIO_SFN(2));
		/* CAM A port(b0010) : DATA[5-7], CLKOUT(MIPI CAM also),
		* FIELD */
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPJ1(0), 5,
					S3C_GPIO_SFN(2));
		/* CAM B port(b0011) : PCLK, DATA[0-6] */
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPM0(0), 8,
					S3C_GPIO_SFN(3));
		/* CAM B port(b0011) : FIELD, DATA[7]*/
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPM1(0), 2,
					S3C_GPIO_SFN(3));
		/* CAM B port(b0011) : VSYNC, HREF, CLKOUT*/
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPM2(0), 3,
					S3C_GPIO_SFN(3));
	}
	/* note : driver strength to max is unnecessary */
#elif defined(CONFIG_MACH_PX)
	/* CAM A port(b0010) : PCLK, VSYNC, HREF, DATA[0-4] */
	s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ0(0), 8, S3C_GPIO_SFN(2));
	/* CAM A port(b0010) : DATA[5-7], CLKOUT(MIPI CAM also), FIELD */
	s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ1(0), 5, S3C_GPIO_SFN(2));
	/* Disable Mclk */
	s3c_gpio_cfgpin(EXYNOS4210_GPJ1(3), S3C_GPIO_INPUT);
	s3c_gpio_setpull(EXYNOS4210_GPJ1(3), S3C_GPIO_PULL_DOWN);

#if !defined(CONFIG_MACH_P8LTE)
	/* CAM B port(b0011) : DATA[0-7] */
	s3c_gpio_cfgrange_nopull(EXYNOS4210_GPE1(0), 8, S3C_GPIO_SFN(3));
	/* CAM B port(b0011) : PCLK, VSYNC, HREF, FIELD, CLKOUT */
	s3c_gpio_cfgrange_nopull(EXYNOS4210_GPE0(0), 5, S3C_GPIO_SFN(3));
#endif
#endif
}

示例#3

0

显示文件

文件： setup-fb-s5p.c 项目： sdemills/SM-V700

int s3cfb_lcd_on(struct platform_device *pdev)
{
	int err;

	err = gpio_request_one(EXYNOS4_GPC0(1), GPIOF_OUT_INIT_LOW, "GPC0");
	if (err) {
		printk(KERN_ERR "failed to request GPC0 for "
			"lcd backlight control\n");
		return err;
	}

	gpio_set_value(EXYNOS4_GPC0(1), GPIO_LEVEL_HIGH);
	msleep(40);

	/*  LVDS_N_SHDN to low */
	err = gpio_request_one(EXYNOS4212_GPM0(5), GPIOF_OUT_INIT_LOW, "GPM0");
	if (err) {
		printk(KERN_ERR "failed to request GPM0 for "
			"lcd backlight control\n");
		return err;
	}

	gpio_set_value(EXYNOS4212_GPM0(5), GPIO_LEVEL_HIGH);
	msleep(300);

	err = gpio_request_one(EXYNOS4212_GPM0(1), GPIOF_OUT_INIT_LOW, "GPM0");
	if (err) {
		printk(KERN_ERR "failed to request GPM0 for "
			"lcd backlight control\n");
		return err;
	}

	gpio_set_value(EXYNOS4212_GPM0(1), GPIO_LEVEL_HIGH);
	mdelay(2);
	return 0;
}

示例#4

0

显示文件

文件： setup-fimc0.c 项目： Goodzila/m040

void s3c_fimc0_cfg_gpio(struct platform_device *pdev)
{
	if (soc_is_exynos4210()) {
#if defined (CONFIG_MX_SERIAL_TYPE)
		/* CAM A port(b0010) : PCLK, VSYNC, HREF, DATA[0-4] */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ0(0), 8, S3C_GPIO_SFN(2));
		/* CAM A port(b0010) : DATA[5-7], CLKOUT(MIPI CAM also), FIELD */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ1(0), 4, S3C_GPIO_SFN(2));
#else
		/* CAM A port(b0010) : PCLK, VSYNC, HREF, DATA[0-4] */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ0(0), 8, S3C_GPIO_SFN(2));
		/* CAM A port(b0010) : DATA[5-7], CLKOUT(MIPI CAM also), FIELD */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPJ1(0), 5, S3C_GPIO_SFN(2));
		/* CAM B port(b0011) : DATA[0-7] */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPE1(0), 8, S3C_GPIO_SFN(3));
		/* CAM B port(b0011) : PCLK, VSYNC, HREF, FIELD, CLKOUT */
		s3c_gpio_cfgrange_nopull(EXYNOS4210_GPE0(0), 5, S3C_GPIO_SFN(3));
#endif
	} else {
#if defined(CONFIG_MX_SERIAL_TYPE)
		/* CAM A port(b0010) : PCLK, VSYNC, HREF, DATA[0-4] */
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPJ0(0), 8, S3C_GPIO_SFN(2));		
		/* CAM A port(b0010) : DATA[5-7], CLKOUT(MIPI CAM also), FIELD */
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPJ1(0), 4, S3C_GPIO_SFN(2));

		/* CAM B port(b0011) : PCLK, DATA[0-6] */
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPM0(0), 8, S3C_GPIO_SFN(3));
		/* CAM B port(b0011) : FIELD, DATA[7]*/
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPM1(0), 2, S3C_GPIO_SFN(3));
		/* CAM B port(b0011) : VSYNC, HREF, CLKOUT*/
		s3c_gpio_cfgrange_nopull(EXYNOS4212_GPM2(0), 3, S3C_GPIO_SFN(3));
#endif

#if defined(CONFIG_MX2_SERIAL_TYPE)
		s3c_gpio_cfgpin(EXYNOS4212_GPJ1(3), S3C_GPIO_SFN(2));
#endif
	}
	/* note : driver strength to max is unnecessary */
}

示例#5

0

显示文件

文件： board-grande-gpio.c 项目： Entropy512/I9300_N8013_Changes

    {EXYNOS4212_GPJ0(0), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
    {EXYNOS4212_GPJ0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
    {EXYNOS4212_GPJ0(2), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
    {EXYNOS4212_GPJ0(3), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_DOWN},
    {EXYNOS4212_GPJ0(4), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
    {EXYNOS4212_GPJ0(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
    {EXYNOS4212_GPJ0(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPJ0(7), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

    {EXYNOS4212_GPJ1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
    {EXYNOS4212_GPJ1(1), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},/*TCH_EN*/
    {EXYNOS4212_GPJ1(2), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},/*TCH_SET*/
    {EXYNOS4212_GPJ1(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
    {EXYNOS4212_GPJ1(4), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},

    {EXYNOS4212_GPM0(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(7), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

    {EXYNOS4212_GPM1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM1(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM1(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* NC */
    {EXYNOS4212_GPM1(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* NC */
    {EXYNOS4212_GPM1(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* NC */
    {EXYNOS4212_GPM1(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* NC */
    {EXYNOS4212_GPM1(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},

示例#6

0

显示文件

文件： gpio-exynos4.c 项目： Hackhao/tzos

		},
	}, {
		.base   = (S5P_VA_GPIO1 + 0x260),
		.eint_offset = 0x44,
		.group	= 12,
		.chip	= {
			.base	= EXYNOS4212_GPJ1(0),
			.ngpio	= EXYNOS4212_GPIO_J1_NR,
			.label	= "GPJ1",
		}
	}, {
		.base	= (S5P_VA_GPIO2 + 0x260),
		.eint_offset = 0x24,
		.group	= 23,
		.chip	= {
			.base	= EXYNOS4212_GPM0(0),
			.ngpio	= EXYNOS4212_GPIO_M0_NR,
			.label	= "GPM0",
		},
	}, {
		.base	= (S5P_VA_GPIO2 + 0x280),
		.eint_offset = 0x28,
		.group	= 24,
		.chip	= {
			.base	= EXYNOS4212_GPM1(0),
			.ngpio	= EXYNOS4212_GPIO_M1_NR,
			.label	= "GPM1",
		},
	}, {
		.base	= (S5P_VA_GPIO2 + 0x2A0),
		.eint_offset = 0x2C,

示例#7

0

显示文件

文件： tab3-gpio.c 项目： pileiba/s4zoomkernel

	{EXYNOS4_GPK1(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */

	{EXYNOS4_GPK3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_CMD */
	{EXYNOS4_GPK3(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(0) */
	{EXYNOS4_GPK3(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(1) */
	{EXYNOS4_GPK3(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(2) */
	{EXYNOS4_GPK3(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(3) */

#if !defined(CONFIG_SEC_MODEM) && !defined(CONFIG_QC_MODEM)
	{EXYNOS4212_GPM0(7), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
#endif
	{EXYNOS4212_GPM3(0), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PMIC_DVS1 */

	{EXYNOS4_GPY0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* IRDA_SDA */
	{EXYNOS4_GPY0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* IRDA_SCL */
#if defined(CONFIG_TARGET_TAB3_WIFI8) || defined(CONFIG_TARGET_TAB3_3G8) || \
		defined(CONFIG_TARGET_TAB3_LTE8)
	{EXYNOS4_GPY0(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */

示例#8

0

显示文件

文件： baffin-gpio.c 项目： HAXTC/android_kernel_samsung_n7000

#if defined(CONFIG_MACH_SUPERIOR_KOR_SKT)
	{EXYNOS4212_GPJ1(0),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* CAM_SW_EN */
#else
	{EXYNOS4212_GPJ1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif
#if defined(CONFIG_MACH_SUPERIOR_KOR_SKT)
	{EXYNOS4212_GPJ1(1),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* TORCH_EN */
	{EXYNOS4212_GPJ1(2),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* TORCH_SET */
#else
	{EXYNOS4212_GPJ1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ1(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif
	{EXYNOS4212_GPJ1(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_MCLK */
	{EXYNOS4212_GPJ1(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* MHL_WAKE_UP */

	{EXYNOS4212_GPM0(0),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* LED_VDD_EN */
	{EXYNOS4212_GPM0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* ISP_STANDBY */
	{EXYNOS4212_GPM0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_IO_EN */
	{EXYNOS4212_GPM0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_ISP_CORE_EN */
	{EXYNOS4212_GPM0(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_AF_EN */
#if defined(CONFIG_MACH_BAFFIN_KOR_LGT)
	{EXYNOS4212_GPM0(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* CP_BOOT_SEL_1.8V */
	{EXYNOS4212_GPM0(6),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* CP_ON */
#else
	{EXYNOS4212_GPM0(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif
	{EXYNOS4212_GPM0(7),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* CAM_SENSOR_CORE_EN */

#if defined(CONFIG_MACH_BAFFIN_KOR_LGT)
	{EXYNOS4212_GPM1(0),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* VIA_PS_HOLD_OFF */

示例#9

0

显示文件

文件： gc1-gpio.c 项目： Lukiqq/GT-I9100-Galaxian-ICS-Kernel

	{EXYNOS4212_GPJ0(0),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPJ0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ0(4),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPJ0(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ0(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ0(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},

	{EXYNOS4212_GPJ1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ1(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPJ1(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4212_GPJ1(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

	{EXYNOS4212_GPM0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4212_GPM0(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

	{EXYNOS4212_GPM1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM1(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /*HWREV*/
	{EXYNOS4212_GPM1(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /*HWREV*/
	{EXYNOS4212_GPM1(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /*HWREV*/
	{EXYNOS4212_GPM1(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /*HWREV*/
	{EXYNOS4212_GPM1(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

示例#10

0

显示文件

文件： zest-gpio.c 项目： LuckJC/Adam-Kernel-GS3

    {EXYNOS4212_GPJ0(0),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* WLAN_EN */
    {EXYNOS4212_GPJ0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPJ0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPJ0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* TOUCH_INT */
    {EXYNOS4212_GPJ0(4),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* CODEC_LDO_EN */
    {EXYNOS4212_GPJ0(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* PS_ALS_EN */
    {EXYNOS4212_GPJ0(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_SENSOR_CORE_EN */
    {EXYNOS4212_GPJ0(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* MSENSE_INT */

    {EXYNOS4212_GPJ1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */  //??
    {EXYNOS4212_GPJ1(1),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* TORCH_EN */
    {EXYNOS4212_GPJ1(2),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* TORCH_SET */
    {EXYNOS4212_GPJ1(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_MCLK */
    {EXYNOS4212_GPJ1(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* MHL_WAKE_UP */

    {EXYNOS4212_GPM0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* LED_VDD_EN */
    {EXYNOS4212_GPM0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_IO_EN */
    {EXYNOS4212_GPM0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM0(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_AF_EN */
    {EXYNOS4212_GPM0(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* 5M_CAM_RST_N */
    {EXYNOS4212_GPM0(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* 5M_CAM_STBY */
    {EXYNOS4212_GPM0(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* VT_STBY */

    {EXYNOS4212_GPM1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4212_GPM1(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* AP_HW_REV0 */
    {EXYNOS4212_GPM1(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* AP_HW_REV1 */
    {EXYNOS4212_GPM1(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* AP_HW_REV2 */
    {EXYNOS4212_GPM1(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* AP_HW_REV3 */
    {EXYNOS4212_GPM1(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CAM_VT_nRST */

示例#11

0

显示文件

文件： kona-01-gpio.c 项目： DirtyDroidX/Kernel_Kona_att

	{EXYNOS4_GPL2(2),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* GPS_EN */
#endif
	{EXYNOS4_GPL2(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* MOTOR_EN -> NC */

#if defined(CONFIG_SEC_MODEM) || defined(CONFIG_QC_MODEM)
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* AP2MDM_PON_RESET_N  , CP_ON*/
#else
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif

	{EXYNOS4_GPL2(6),  S3C_GPIO_SLP_INPUT,  S3C_GPIO_PULL_DOWN}, /*ACCESSORY_EN -> NC */
	{EXYNOS4_GPL2(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* UART_SEL -> NC */

#if defined(CONFIG_SEC_MODEM) || defined(CONFIG_QC_MODEM)
	{EXYNOS4212_GPM0(0),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* MICBIAS_EN */
#else
	{EXYNOS4212_GPM0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* MICBIAS_EN */
#endif
	{EXYNOS4212_GPM0(1),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* LED_BACKLIGHT_RESET */
	{EXYNOS4212_GPM0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM0(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* 2TOUCH_EN */
	{EXYNOS4212_GPM0(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* IRDA_IRQ */
	{EXYNOS4212_GPM0(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

	{EXYNOS4212_GPM1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* MOTOR_I2C_SDA */
	{EXYNOS4212_GPM1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* MOTOR_I2C_SCL */
	{EXYNOS4212_GPM1(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* HW_REV0 */
	{EXYNOS4212_GPM1(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* HW_REV1 */