static void test() {
size_t flag_value;
save_flags();
// Set some limits that makes the math simple.
FLAG_SET_ERGO(uintx, MaxHeapSize, 180 * M);
FLAG_SET_ERGO(uintx, InitialHeapSize, 120 * M);
Arguments::set_min_heap_size(40 * M);
// If NewSize is set on the command line, it should be used
// for both min and initial young size if less than min heap.
flag_value = 20 * M;
FLAG_SET_CMDLINE(uintx, NewSize, flag_value);
verify_min(flag_value);
verify_initial(flag_value);
// If NewSize is set on command line, but is larger than the min
// heap size, it should only be used for initial young size.
flag_value = 80 * M;
FLAG_SET_CMDLINE(uintx, NewSize, flag_value);
verify_initial(flag_value);
// If NewSize has been ergonomically set, the collector policy
// should use it for min but calculate the initial young size
// using NewRatio.
flag_value = 20 * M;
FLAG_SET_ERGO(uintx, NewSize, flag_value);
verify_min(flag_value);
verify_scaled_initial(InitialHeapSize);
restore_flags();
}
static void set_basic_flag_values() {
FLAG_SET_ERGO(size_t, MaxHeapSize, 180 * M);
FLAG_SET_ERGO(size_t, InitialHeapSize, 100 * M);
FLAG_SET_ERGO(size_t, OldSize, 4 * M);
FLAG_SET_ERGO(size_t, NewSize, 1 * M);
FLAG_SET_ERGO(size_t, MaxNewSize, 80 * M);
Arguments::set_min_heap_size(40 * M);
}
void AdvancedThresholdPolicy::initialize() {
// Turn on ergonomic compiler count selection
if (FLAG_IS_DEFAULT(CICompilerCountPerCPU) && FLAG_IS_DEFAULT(CICompilerCount)) {
FLAG_SET_DEFAULT(CICompilerCountPerCPU, true);
}
int count = CICompilerCount;
if (CICompilerCountPerCPU) {
// Simple log n seems to grow too slowly for tiered, try something faster: log n * log log n
int log_cpu = log2_intptr(os::active_processor_count());
int loglog_cpu = log2_intptr(MAX2(log_cpu, 1));
count = MAX2(log_cpu * loglog_cpu, 1) * 3 / 2;
}
set_c1_count(MAX2(count / 3, 1));
set_c2_count(MAX2(count - c1_count(), 1));
FLAG_SET_ERGO(intx, CICompilerCount, c1_count() + c2_count());
// Some inlining tuning
#ifdef X86
if (FLAG_IS_DEFAULT(InlineSmallCode)) {
FLAG_SET_DEFAULT(InlineSmallCode, 2000);
}
#endif
#if defined SPARC || defined AARCH64
if (FLAG_IS_DEFAULT(InlineSmallCode)) {
FLAG_SET_DEFAULT(InlineSmallCode, 2500);
}
#endif
set_increase_threshold_at_ratio();
set_start_time(os::javaTimeMillis());
}
void VM_Version::initialize() {
// Test which instructions are supported and measure cache line size.
determine_features();
// If PowerArchitecturePPC64 hasn't been specified explicitly determine from features.
if (FLAG_IS_DEFAULT(PowerArchitecturePPC64)) {
if (VM_Version::has_lqarx()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 8);
} else if (VM_Version::has_popcntw()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 7);
} else if (VM_Version::has_cmpb()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 6);
} else if (VM_Version::has_popcntb()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 5);
} else {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 0);
}
}
bool PowerArchitecturePPC64_ok = false;
switch (PowerArchitecturePPC64) {
case 8: if (!VM_Version::has_lqarx() ) break;
case 7: if (!VM_Version::has_popcntw()) break;
case 6: if (!VM_Version::has_cmpb() ) break;
case 5: if (!VM_Version::has_popcntb()) break;
case 0: PowerArchitecturePPC64_ok = true; break;
default: break;
}
guarantee(PowerArchitecturePPC64_ok, "PowerArchitecturePPC64 cannot be set to "
UINTX_FORMAT " on this machine", PowerArchitecturePPC64);
// Power 8: Configure Data Stream Control Register.
if (has_mfdscr()) {
config_dscr();
}
if (!UseSIGTRAP) {
MSG(TrapBasedICMissChecks);
MSG(TrapBasedNotEntrantChecks);
MSG(TrapBasedNullChecks);
FLAG_SET_ERGO(bool, TrapBasedNotEntrantChecks, false);
FLAG_SET_ERGO(bool, TrapBasedNullChecks, false);
FLAG_SET_ERGO(bool, TrapBasedICMissChecks, false);
}
void SimpleThresholdPolicy::initialize() {
if (FLAG_IS_DEFAULT(CICompilerCount)) {
FLAG_SET_DEFAULT(CICompilerCount, 3);
}
int count = CICompilerCount;
if (CICompilerCountPerCPU) {
count = MAX2(log2_intptr(os::active_processor_count()), 1) * 3 / 2;
}
set_c1_count(MAX2(count / 3, 1));
set_c2_count(MAX2(count - c1_count(), 1));
FLAG_SET_ERGO(intx, CICompilerCount, c1_count() + c2_count());
}
void NonTieredCompPolicy::initialize() {
// Setup the compiler thread numbers
if (CICompilerCountPerCPU) {
// Example: if CICompilerCountPerCPU is true, then we get
// max(log2(8)-1,1) = 2 compiler threads on an 8-way machine.
// May help big-app startup time.
_compiler_count = MAX2(log2_intptr(os::active_processor_count())-1,1);
FLAG_SET_ERGO(intx, CICompilerCount, _compiler_count);
} else {
_compiler_count = CICompilerCount;
}
}
void VM_Version::initialize() {
// Test which instructions are supported and measure cache line size.
determine_features();
// If PowerArchitecturePPC64 hasn't been specified explicitly determine from features.
if (FLAG_IS_DEFAULT(PowerArchitecturePPC64)) {
if (VM_Version::has_lqarx()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 8);
} else if (VM_Version::has_popcntw()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 7);
} else if (VM_Version::has_cmpb()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 6);
} else if (VM_Version::has_popcntb()) {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 5);
} else {
FLAG_SET_ERGO(uintx, PowerArchitecturePPC64, 0);
}
}
guarantee(PowerArchitecturePPC64 == 0 || PowerArchitecturePPC64 == 5 ||
PowerArchitecturePPC64 == 6 || PowerArchitecturePPC64 == 7 ||
PowerArchitecturePPC64 == 8,
"PowerArchitecturePPC64 should be 0, 5, 6, 7, or 8");
// Power 8: Configure Data Stream Control Register.
if (PowerArchitecturePPC64 >= 8) {
config_dscr();
}
if (!UseSIGTRAP) {
MSG(TrapBasedICMissChecks);
MSG(TrapBasedNotEntrantChecks);
MSG(TrapBasedNullChecks);
FLAG_SET_ERGO(bool, TrapBasedNotEntrantChecks, false);
FLAG_SET_ERGO(bool, TrapBasedNullChecks, false);
FLAG_SET_ERGO(bool, TrapBasedICMissChecks, false);
}
static void test_new_size() {
size_t flag_value;
save_flags();
// If NewSize is set on the command line, it should be used
// for both min and initial young size if less than min heap.
flag_value = 20 * M;
set_basic_flag_values();
FLAG_SET_CMDLINE(size_t, NewSize, flag_value);
verify_young_min(flag_value);
set_basic_flag_values();
FLAG_SET_CMDLINE(size_t, NewSize, flag_value);
verify_young_initial(flag_value);
// If NewSize is set on command line, but is larger than the min
// heap size, it should only be used for initial young size.
flag_value = 80 * M;
set_basic_flag_values();
FLAG_SET_CMDLINE(size_t, NewSize, flag_value);
verify_young_initial(flag_value);
// If NewSize has been ergonomically set, the collector policy
// should use it for min but calculate the initial young size
// using NewRatio.
flag_value = 20 * M;
set_basic_flag_values();
FLAG_SET_ERGO(size_t, NewSize, flag_value);
verify_young_min(flag_value);
set_basic_flag_values();
FLAG_SET_ERGO(size_t, NewSize, flag_value);
verify_scaled_young_initial(InitialHeapSize);
restore_flags();
}
void TwoGenerationCollectorPolicy::initialize_flags() {
GenCollectorPolicy::initialize_flags();
if (!is_size_aligned(OldSize, _gen_alignment)) {
FLAG_SET_ERGO(uintx, OldSize, align_size_down(OldSize, _gen_alignment));
}
if (FLAG_IS_CMDLINE(OldSize) && FLAG_IS_DEFAULT(MaxHeapSize)) {
// NewRatio will be used later to set the young generation size so we use
// it to calculate how big the heap should be based on the requested OldSize
// and NewRatio.
assert(NewRatio > 0, "NewRatio should have been set up earlier");
size_t calculated_heapsize = (OldSize / NewRatio) * (NewRatio + 1);
calculated_heapsize = align_size_up(calculated_heapsize, _heap_alignment);
FLAG_SET_ERGO(uintx, MaxHeapSize, calculated_heapsize);
_max_heap_byte_size = MaxHeapSize;
FLAG_SET_ERGO(uintx, InitialHeapSize, calculated_heapsize);
_initial_heap_byte_size = InitialHeapSize;
}
// adjust max heap size if necessary
if (NewSize + OldSize > MaxHeapSize) {
if (_max_heap_size_cmdline) {
// somebody set a maximum heap size with the intention that we should not
// exceed it. Adjust New/OldSize as necessary.
uintx calculated_size = NewSize + OldSize;
double shrink_factor = (double) MaxHeapSize / calculated_size;
uintx smaller_new_size = align_size_down((uintx)(NewSize * shrink_factor), _gen_alignment);
FLAG_SET_ERGO(uintx, NewSize, MAX2(young_gen_size_lower_bound(), smaller_new_size));
_initial_gen0_size = NewSize;
// OldSize is already aligned because above we aligned MaxHeapSize to
// _heap_alignment, and we just made sure that NewSize is aligned to
// _gen_alignment. In initialize_flags() we verified that _heap_alignment
// is a multiple of _gen_alignment.
FLAG_SET_ERGO(uintx, OldSize, MaxHeapSize - NewSize);
} else {
FLAG_SET_ERGO(uintx, MaxHeapSize, align_size_up(NewSize + OldSize, _heap_alignment));
_max_heap_byte_size = MaxHeapSize;
}
}
always_do_update_barrier = UseConcMarkSweepGC;
DEBUG_ONLY(TwoGenerationCollectorPolicy::assert_flags();)
}
void SimpleThresholdPolicy::initialize() {
if (FLAG_IS_DEFAULT(CICompilerCount)) {
FLAG_SET_DEFAULT(CICompilerCount, 3);
}
int count = CICompilerCount;
#ifdef _LP64
// On 64-bit systems, scale the number of compiler threads with
// the number of cores available on the system. Scaling is not
// performed on 32-bit systems because it can lead to exhaustion
// of the virtual memory address space available to the JVM.
if (CICompilerCountPerCPU) {
count = MAX2(log2_intptr(os::active_processor_count()) * 3 / 2, 2);
FLAG_SET_ERGO(intx, CICompilerCount, count);
}
#endif
if (TieredStopAtLevel < CompLevel_full_optimization) {
// No C2 compiler thread required
set_c1_count(count);
} else {
set_c1_count(MAX2(count / 3, 1));
set_c2_count(MAX2(count - c1_count(), 1));
}
assert(count == c1_count() + c2_count(), "inconsistent compiler thread count");
}
void GenCollectorPolicy::initialize_flags() {
CollectorPolicy::initialize_flags();
assert(_gen_alignment != 0, "Generation alignment not set up properly");
assert(_heap_alignment >= _gen_alignment,
err_msg("heap_alignment: " SIZE_FORMAT " less than gen_alignment: " SIZE_FORMAT,
_heap_alignment, _gen_alignment));
assert(_gen_alignment % _space_alignment == 0,
err_msg("gen_alignment: " SIZE_FORMAT " not aligned by space_alignment: " SIZE_FORMAT,
_gen_alignment, _space_alignment));
assert(_heap_alignment % _gen_alignment == 0,
err_msg("heap_alignment: " SIZE_FORMAT " not aligned by gen_alignment: " SIZE_FORMAT,
_heap_alignment, _gen_alignment));
// All generational heaps have a youngest gen; handle those flags here
// Make sure the heap is large enough for two generations
uintx smallest_new_size = young_gen_size_lower_bound();
uintx smallest_heap_size = align_size_up(smallest_new_size + align_size_up(_space_alignment, _gen_alignment),
_heap_alignment);
if (MaxHeapSize < smallest_heap_size) {
FLAG_SET_ERGO(uintx, MaxHeapSize, smallest_heap_size);
_max_heap_byte_size = MaxHeapSize;
}
// If needed, synchronize _min_heap_byte size and _initial_heap_byte_size
if (_min_heap_byte_size < smallest_heap_size) {
_min_heap_byte_size = smallest_heap_size;
if (InitialHeapSize < _min_heap_byte_size) {
FLAG_SET_ERGO(uintx, InitialHeapSize, smallest_heap_size);
_initial_heap_byte_size = smallest_heap_size;
}
}
// Now take the actual NewSize into account. We will silently increase NewSize
// if the user specified a smaller or unaligned value.
smallest_new_size = MAX2(smallest_new_size, (uintx)align_size_down(NewSize, _gen_alignment));
if (smallest_new_size != NewSize) {
// Do not use FLAG_SET_ERGO to update NewSize here, since this will override
// if NewSize was set on the command line or not. This information is needed
// later when setting the initial and minimum young generation size.
NewSize = smallest_new_size;
}
_initial_gen0_size = NewSize;
if (!FLAG_IS_DEFAULT(MaxNewSize)) {
uintx min_new_size = MAX2(_gen_alignment, _min_gen0_size);
if (MaxNewSize >= MaxHeapSize) {
// Make sure there is room for an old generation
uintx smaller_max_new_size = MaxHeapSize - _gen_alignment;
if (FLAG_IS_CMDLINE(MaxNewSize)) {
warning("MaxNewSize (" SIZE_FORMAT "k) is equal to or greater than the entire "
"heap (" SIZE_FORMAT "k). A new max generation size of " SIZE_FORMAT "k will be used.",
MaxNewSize/K, MaxHeapSize/K, smaller_max_new_size/K);
}
FLAG_SET_ERGO(uintx, MaxNewSize, smaller_max_new_size);
if (NewSize > MaxNewSize) {
FLAG_SET_ERGO(uintx, NewSize, MaxNewSize);
_initial_gen0_size = NewSize;
}
} else if (MaxNewSize < min_new_size) {
FLAG_SET_ERGO(uintx, MaxNewSize, min_new_size);
} else if (!is_size_aligned(MaxNewSize, _gen_alignment)) {
FLAG_SET_ERGO(uintx, MaxNewSize, align_size_down(MaxNewSize, _gen_alignment));
}
_max_gen0_size = MaxNewSize;
}
if (NewSize > MaxNewSize) {
// At this point this should only happen if the user specifies a large NewSize and/or
// a small (but not too small) MaxNewSize.
if (FLAG_IS_CMDLINE(MaxNewSize)) {
warning("NewSize (" SIZE_FORMAT "k) is greater than the MaxNewSize (" SIZE_FORMAT "k). "
"A new max generation size of " SIZE_FORMAT "k will be used.",
NewSize/K, MaxNewSize/K, NewSize/K);
}
FLAG_SET_ERGO(uintx, MaxNewSize, NewSize);
_max_gen0_size = MaxNewSize;
}
if (SurvivorRatio < 1 || NewRatio < 1) {
vm_exit_during_initialization("Invalid young gen ratio specified");
}
DEBUG_ONLY(GenCollectorPolicy::assert_flags();)
}
void CollectorPolicy::initialize_flags() {
assert(_space_alignment != 0, "Space alignment not set up properly");
assert(_heap_alignment != 0, "Heap alignment not set up properly");
assert(_heap_alignment >= _space_alignment,
err_msg("heap_alignment: " SIZE_FORMAT " less than space_alignment: " SIZE_FORMAT,
_heap_alignment, _space_alignment));
assert(_heap_alignment % _space_alignment == 0,
err_msg("heap_alignment: " SIZE_FORMAT " not aligned by space_alignment: " SIZE_FORMAT,
_heap_alignment, _space_alignment));
if (FLAG_IS_CMDLINE(MaxHeapSize)) {
if (FLAG_IS_CMDLINE(InitialHeapSize) && InitialHeapSize > MaxHeapSize) {
vm_exit_during_initialization("Initial heap size set to a larger value than the maximum heap size");
}
if (_min_heap_byte_size != 0 && MaxHeapSize < _min_heap_byte_size) {
vm_exit_during_initialization("Incompatible minimum and maximum heap sizes specified");
}
_max_heap_size_cmdline = true;
}
// Check heap parameter properties
if (InitialHeapSize < M) {
vm_exit_during_initialization("Too small initial heap");
}
if (_min_heap_byte_size < M) {
vm_exit_during_initialization("Too small minimum heap");
}
// User inputs from -Xmx and -Xms must be aligned
_min_heap_byte_size = align_size_up(_min_heap_byte_size, _heap_alignment);
uintx aligned_initial_heap_size = align_size_up(InitialHeapSize, _heap_alignment);
uintx aligned_max_heap_size = align_size_up(MaxHeapSize, _heap_alignment);
// Write back to flags if the values changed
if (aligned_initial_heap_size != InitialHeapSize) {
FLAG_SET_ERGO(uintx, InitialHeapSize, aligned_initial_heap_size);
}
if (aligned_max_heap_size != MaxHeapSize) {
FLAG_SET_ERGO(uintx, MaxHeapSize, aligned_max_heap_size);
}
if (FLAG_IS_CMDLINE(InitialHeapSize) && _min_heap_byte_size != 0 &&
InitialHeapSize < _min_heap_byte_size) {
vm_exit_during_initialization("Incompatible minimum and initial heap sizes specified");
}
if (!FLAG_IS_DEFAULT(InitialHeapSize) && InitialHeapSize > MaxHeapSize) {
FLAG_SET_ERGO(uintx, MaxHeapSize, InitialHeapSize);
} else if (!FLAG_IS_DEFAULT(MaxHeapSize) && InitialHeapSize > MaxHeapSize) {
FLAG_SET_ERGO(uintx, InitialHeapSize, MaxHeapSize);
if (InitialHeapSize < _min_heap_byte_size) {
_min_heap_byte_size = InitialHeapSize;
}
}
_initial_heap_byte_size = InitialHeapSize;
_max_heap_byte_size = MaxHeapSize;
FLAG_SET_ERGO(uintx, MinHeapDeltaBytes, align_size_up(MinHeapDeltaBytes, _space_alignment));
DEBUG_ONLY(CollectorPolicy::assert_flags();)
}
void VM_Version::initialize() {
_features = determine_features();
PrefetchCopyIntervalInBytes = prefetch_copy_interval_in_bytes();
PrefetchScanIntervalInBytes = prefetch_scan_interval_in_bytes();
PrefetchFieldsAhead = prefetch_fields_ahead();
// Allocation prefetch settings
intx cache_line_size = prefetch_data_size();
if( cache_line_size > AllocatePrefetchStepSize )
AllocatePrefetchStepSize = cache_line_size;
assert(AllocatePrefetchLines > 0, "invalid value");
if( AllocatePrefetchLines < 1 ) // set valid value in product VM
AllocatePrefetchLines = 3;
assert(AllocateInstancePrefetchLines > 0, "invalid value");
if( AllocateInstancePrefetchLines < 1 ) // set valid value in product VM
AllocateInstancePrefetchLines = 1;
AllocatePrefetchDistance = allocate_prefetch_distance();
AllocatePrefetchStyle = allocate_prefetch_style();
if (AllocatePrefetchStyle == 3 && !has_blk_init()) {
warning("BIS instructions are not available on this CPU");
FLAG_SET_DEFAULT(AllocatePrefetchStyle, 1);
}
guarantee(VM_Version::has_v9(), "only SPARC v9 is supported");
UseSSE = 0; // Only on x86 and x64
_supports_cx8 = has_v9();
_supports_atomic_getset4 = true; // swap instruction
if (is_niagara()) {
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseInlineCaches)) {
FLAG_SET_DEFAULT(UseInlineCaches, false);
}
// Align loops on a single instruction boundary.
if (FLAG_IS_DEFAULT(OptoLoopAlignment)) {
FLAG_SET_DEFAULT(OptoLoopAlignment, 4);
}
#ifdef _LP64
// 32-bit oops don't make sense for the 64-bit VM on sparc
// since the 32-bit VM has the same registers and smaller objects.
Universe::set_narrow_oop_shift(LogMinObjAlignmentInBytes);
Universe::set_narrow_klass_shift(LogKlassAlignmentInBytes);
#endif // _LP64
#ifdef COMPILER2
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseJumpTables)) {
FLAG_SET_DEFAULT(UseJumpTables, true);
}
// Single-issue, so entry and loop tops are
// aligned on a single instruction boundary
if (FLAG_IS_DEFAULT(InteriorEntryAlignment)) {
FLAG_SET_DEFAULT(InteriorEntryAlignment, 4);
}
if (is_niagara_plus()) {
if (has_blk_init() && UseTLAB &&
FLAG_IS_DEFAULT(AllocatePrefetchInstr)) {
// Use BIS instruction for TLAB allocation prefetch.
FLAG_SET_ERGO(intx, AllocatePrefetchInstr, 1);
if (FLAG_IS_DEFAULT(AllocatePrefetchStyle)) {
FLAG_SET_ERGO(intx, AllocatePrefetchStyle, 3);
}
if (FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use smaller prefetch distance with BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 64);
}
}
if (is_T4()) {
// Double number of prefetched cache lines on T4
// since L2 cache line size is smaller (32 bytes).
if (FLAG_IS_DEFAULT(AllocatePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocatePrefetchLines, AllocatePrefetchLines*2);
}
if (FLAG_IS_DEFAULT(AllocateInstancePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocateInstancePrefetchLines, AllocateInstancePrefetchLines*2);
}
}
if (AllocatePrefetchStyle != 3 && FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use different prefetch distance without BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 256);
}
if (AllocatePrefetchInstr == 1) {
// Need a space at the end of TLAB for BIS since it
// will fault when accessing memory outside of heap.
// +1 for rounding up to next cache line, +1 to be safe
int lines = AllocatePrefetchLines + 2;
int step_size = AllocatePrefetchStepSize;
int distance = AllocatePrefetchDistance;
_reserve_for_allocation_prefetch = (distance + step_size*lines)/(int)HeapWordSize;
}
}
#endif
}
// Use hardware population count instruction if available.
if (has_hardware_popc()) {
if (FLAG_IS_DEFAULT(UsePopCountInstruction)) {
FLAG_SET_DEFAULT(UsePopCountInstruction, true);
}
} else if (UsePopCountInstruction) {
warning("POPC instruction is not available on this CPU");
FLAG_SET_DEFAULT(UsePopCountInstruction, false);
}
// T4 and newer Sparc cpus have new compare and branch instruction.
if (has_cbcond()) {
if (FLAG_IS_DEFAULT(UseCBCond)) {
FLAG_SET_DEFAULT(UseCBCond, true);
}
} else if (UseCBCond) {
warning("CBCOND instruction is not available on this CPU");
FLAG_SET_DEFAULT(UseCBCond, false);
}
assert(BlockZeroingLowLimit > 0, "invalid value");
if (has_block_zeroing() && cache_line_size > 0) {
if (FLAG_IS_DEFAULT(UseBlockZeroing)) {
FLAG_SET_DEFAULT(UseBlockZeroing, true);
}
} else if (UseBlockZeroing) {
warning("BIS zeroing instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseBlockZeroing, false);
}
assert(BlockCopyLowLimit > 0, "invalid value");
if (has_block_zeroing() && cache_line_size > 0) { // has_blk_init() && is_T4(): core's local L2 cache
if (FLAG_IS_DEFAULT(UseBlockCopy)) {
FLAG_SET_DEFAULT(UseBlockCopy, true);
}
} else if (UseBlockCopy) {
warning("BIS instructions are not available or expensive on this CPU");
FLAG_SET_DEFAULT(UseBlockCopy, false);
}
#ifdef COMPILER2
// T4 and newer Sparc cpus have fast RDPC.
if (has_fast_rdpc() && FLAG_IS_DEFAULT(UseRDPCForConstantTableBase)) {
FLAG_SET_DEFAULT(UseRDPCForConstantTableBase, true);
}
// Currently not supported anywhere.
FLAG_SET_DEFAULT(UseFPUForSpilling, false);
MaxVectorSize = 8;
assert((InteriorEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
#endif
assert((CodeEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
assert((OptoLoopAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
char buf[512];
jio_snprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
(has_v9() ? ", v9" : (has_v8() ? ", v8" : "")),
(has_hardware_popc() ? ", popc" : ""),
(has_vis1() ? ", vis1" : ""),
(has_vis2() ? ", vis2" : ""),
(has_vis3() ? ", vis3" : ""),
(has_blk_init() ? ", blk_init" : ""),
(has_cbcond() ? ", cbcond" : ""),
(has_aes() ? ", aes" : ""),
(has_sha1() ? ", sha1" : ""),
(has_sha256() ? ", sha256" : ""),
(has_sha512() ? ", sha512" : ""),
(has_crc32c() ? ", crc32c" : ""),
(is_ultra3() ? ", ultra3" : ""),
(is_sun4v() ? ", sun4v" : ""),
(is_niagara_plus() ? ", niagara_plus" : (is_niagara() ? ", niagara" : "")),
(is_sparc64() ? ", sparc64" : ""),
(!has_hardware_mul32() ? ", no-mul32" : ""),
(!has_hardware_div32() ? ", no-div32" : ""),
(!has_hardware_fsmuld() ? ", no-fsmuld" : ""));
// buf is started with ", " or is empty
_features_str = os::strdup(strlen(buf) > 2 ? buf + 2 : buf);
// UseVIS is set to the smallest of what hardware supports and what
// the command line requires. I.e., you cannot set UseVIS to 3 on
// older UltraSparc which do not support it.
if (UseVIS > 3) UseVIS=3;
if (UseVIS < 0) UseVIS=0;
if (!has_vis3()) // Drop to 2 if no VIS3 support
UseVIS = MIN2((intx)2,UseVIS);
if (!has_vis2()) // Drop to 1 if no VIS2 support
UseVIS = MIN2((intx)1,UseVIS);
if (!has_vis1()) // Drop to 0 if no VIS1 support
UseVIS = 0;
// SPARC T4 and above should have support for AES instructions
if (has_aes()) {
if (FLAG_IS_DEFAULT(UseAES)) {
FLAG_SET_DEFAULT(UseAES, true);
}
if (!UseAES) {
if (UseAESIntrinsics && !FLAG_IS_DEFAULT(UseAESIntrinsics)) {
warning("AES intrinsics require UseAES flag to be enabled. Intrinsics will be disabled.");
}
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
} else {
// The AES intrinsic stubs require AES instruction support (of course)
// but also require VIS3 mode or higher for instructions it use.
if (UseVIS > 2) {
if (FLAG_IS_DEFAULT(UseAESIntrinsics)) {
FLAG_SET_DEFAULT(UseAESIntrinsics, true);
}
} else {
if (UseAESIntrinsics && !FLAG_IS_DEFAULT(UseAESIntrinsics)) {
warning("SPARC AES intrinsics require VIS3 instructions. Intrinsics will be disabled.");
}
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
} else if (UseAES || UseAESIntrinsics) {
if (UseAES && !FLAG_IS_DEFAULT(UseAES)) {
warning("AES instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseAES, false);
}
if (UseAESIntrinsics && !FLAG_IS_DEFAULT(UseAESIntrinsics)) {
warning("AES intrinsics are not available on this CPU");
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
// GHASH/GCM intrinsics
if (has_vis3() && (UseVIS > 2)) {
if (FLAG_IS_DEFAULT(UseGHASHIntrinsics)) {
UseGHASHIntrinsics = true;
}
} else if (UseGHASHIntrinsics) {
if (!FLAG_IS_DEFAULT(UseGHASHIntrinsics))
warning("GHASH intrinsics require VIS3 instruction support. Intrinsics will be disabled");
FLAG_SET_DEFAULT(UseGHASHIntrinsics, false);
}
// SHA1, SHA256, and SHA512 instructions were added to SPARC T-series at different times
if (has_sha1() || has_sha256() || has_sha512()) {
if (UseVIS > 0) { // SHA intrinsics use VIS1 instructions
if (FLAG_IS_DEFAULT(UseSHA)) {
FLAG_SET_DEFAULT(UseSHA, true);
}
} else {
if (UseSHA) {
warning("SPARC SHA intrinsics require VIS1 instruction support. Intrinsics will be disabled.");
FLAG_SET_DEFAULT(UseSHA, false);
}
}
} else if (UseSHA) {
warning("SHA instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseSHA, false);
}
if (UseSHA && has_sha1()) {
if (FLAG_IS_DEFAULT(UseSHA1Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA1Intrinsics, true);
}
} else if (UseSHA1Intrinsics) {
warning("Intrinsics for SHA-1 crypto hash functions not available on this CPU.");
FLAG_SET_DEFAULT(UseSHA1Intrinsics, false);
}
if (UseSHA && has_sha256()) {
if (FLAG_IS_DEFAULT(UseSHA256Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA256Intrinsics, true);
}
} else if (UseSHA256Intrinsics) {
warning("Intrinsics for SHA-224 and SHA-256 crypto hash functions not available on this CPU.");
FLAG_SET_DEFAULT(UseSHA256Intrinsics, false);
}
if (UseSHA && has_sha512()) {
if (FLAG_IS_DEFAULT(UseSHA512Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA512Intrinsics, true);
}
} else if (UseSHA512Intrinsics) {
warning("Intrinsics for SHA-384 and SHA-512 crypto hash functions not available on this CPU.");
FLAG_SET_DEFAULT(UseSHA512Intrinsics, false);
}
if (!(UseSHA1Intrinsics || UseSHA256Intrinsics || UseSHA512Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA, false);
}
// SPARC T4 and above should have support for CRC32C instruction
if (has_crc32c()) {
if (UseVIS > 2) { // CRC32C intrinsics use VIS3 instructions
if (FLAG_IS_DEFAULT(UseCRC32CIntrinsics)) {
FLAG_SET_DEFAULT(UseCRC32CIntrinsics, true);
}
} else {
if (UseCRC32CIntrinsics) {
warning("SPARC CRC32C intrinsics require VIS3 instruction support. Intrinsics will be disabled.");
FLAG_SET_DEFAULT(UseCRC32CIntrinsics, false);
}
}
} else if (UseCRC32CIntrinsics) {
warning("CRC32C instruction is not available on this CPU");
FLAG_SET_DEFAULT(UseCRC32CIntrinsics, false);
}
if (UseVIS > 2) {
if (FLAG_IS_DEFAULT(UseAdler32Intrinsics)) {
FLAG_SET_DEFAULT(UseAdler32Intrinsics, true);
}
} else if (UseAdler32Intrinsics) {
warning("SPARC Adler32 intrinsics require VIS3 instruction support. Intrinsics will be disabled.");
FLAG_SET_DEFAULT(UseAdler32Intrinsics, false);
}
if (UseVIS > 2) {
if (FLAG_IS_DEFAULT(UseCRC32Intrinsics)) {
FLAG_SET_DEFAULT(UseCRC32Intrinsics, true);
}
} else if (UseCRC32Intrinsics) {
warning("SPARC CRC32 intrinsics require VIS3 insructions support. Intriniscs will be disabled");
FLAG_SET_DEFAULT(UseCRC32Intrinsics, false);
}
if (FLAG_IS_DEFAULT(ContendedPaddingWidth) &&
(cache_line_size > ContendedPaddingWidth))
ContendedPaddingWidth = cache_line_size;
// This machine does not allow unaligned memory accesses
if (UseUnalignedAccesses) {
if (!FLAG_IS_DEFAULT(UseUnalignedAccesses))
warning("Unaligned memory access is not available on this CPU");
FLAG_SET_DEFAULT(UseUnalignedAccesses, false);
}
if (PrintMiscellaneous && Verbose) {
tty->print_cr("L1 data cache line size: %u", L1_data_cache_line_size());
tty->print_cr("L2 data cache line size: %u", L2_data_cache_line_size());
tty->print("Allocation");
if (AllocatePrefetchStyle <= 0) {
tty->print_cr(": no prefetching");
} else {
tty->print(" prefetching: ");
if (AllocatePrefetchInstr == 0) {
tty->print("PREFETCH");
} else if (AllocatePrefetchInstr == 1) {
tty->print("BIS");
}
if (AllocatePrefetchLines > 1) {
tty->print_cr(" at distance %d, %d lines of %d bytes", (int) AllocatePrefetchDistance, (int) AllocatePrefetchLines, (int) AllocatePrefetchStepSize);
} else {
tty->print_cr(" at distance %d, one line of %d bytes", (int) AllocatePrefetchDistance, (int) AllocatePrefetchStepSize);
}
}
if (PrefetchCopyIntervalInBytes > 0) {
tty->print_cr("PrefetchCopyIntervalInBytes %d", (int) PrefetchCopyIntervalInBytes);
}
if (PrefetchScanIntervalInBytes > 0) {
tty->print_cr("PrefetchScanIntervalInBytes %d", (int) PrefetchScanIntervalInBytes);
}
if (PrefetchFieldsAhead > 0) {
tty->print_cr("PrefetchFieldsAhead %d", (int) PrefetchFieldsAhead);
}
if (ContendedPaddingWidth > 0) {
tty->print_cr("ContendedPaddingWidth %d", (int) ContendedPaddingWidth);
}
}
}
// Minimum sizes of the generations may be different than
// the initial sizes. An inconsistency is permitted here
// in the total size that can be specified explicitly by
// command line specification of OldSize and NewSize and
// also a command line specification of -Xms. Issue a warning
// but allow the values to pass.
void GenCollectorPolicy::initialize_size_info() {
CollectorPolicy::initialize_size_info();
_initial_young_size = NewSize;
_max_young_size = MaxNewSize;
_initial_old_size = OldSize;
// Determine maximum size of the young generation.
if (FLAG_IS_DEFAULT(MaxNewSize)) {
_max_young_size = scale_by_NewRatio_aligned(_max_heap_byte_size);
// Bound the maximum size by NewSize below (since it historically
// would have been NewSize and because the NewRatio calculation could
// yield a size that is too small) and bound it by MaxNewSize above.
// Ergonomics plays here by previously calculating the desired
// NewSize and MaxNewSize.
_max_young_size = MIN2(MAX2(_max_young_size, _initial_young_size), MaxNewSize);
}
// Given the maximum young size, determine the initial and
// minimum young sizes.
if (_max_heap_byte_size == _initial_heap_byte_size) {
// The maximum and initial heap sizes are the same so the generation's
// initial size must be the same as it maximum size. Use NewSize as the
// size if set on command line.
_max_young_size = FLAG_IS_CMDLINE(NewSize) ? NewSize : _max_young_size;
_initial_young_size = _max_young_size;
// Also update the minimum size if min == initial == max.
if (_max_heap_byte_size == _min_heap_byte_size) {
_min_young_size = _max_young_size;
}
} else {
if (FLAG_IS_CMDLINE(NewSize)) {
// If NewSize is set on the command line, we should use it as
// the initial size, but make sure it is within the heap bounds.
_initial_young_size =
MIN2(_max_young_size, bound_minus_alignment(NewSize, _initial_heap_byte_size));
_min_young_size = bound_minus_alignment(_initial_young_size, _min_heap_byte_size);
} else {
// For the case where NewSize is not set on the command line, use
// NewRatio to size the initial generation size. Use the current
// NewSize as the floor, because if NewRatio is overly large, the resulting
// size can be too small.
_initial_young_size =
MIN2(_max_young_size, MAX2(scale_by_NewRatio_aligned(_initial_heap_byte_size), NewSize));
}
}
log_trace(gc, heap)("1: Minimum young " SIZE_FORMAT " Initial young " SIZE_FORMAT " Maximum young " SIZE_FORMAT,
_min_young_size, _initial_young_size, _max_young_size);
// At this point the minimum, initial and maximum sizes
// of the overall heap and of the young generation have been determined.
// The maximum old size can be determined from the maximum young
// and maximum heap size since no explicit flags exist
// for setting the old generation maximum.
_max_old_size = MAX2(_max_heap_byte_size - _max_young_size, _gen_alignment);
// If no explicit command line flag has been set for the
// old generation size, use what is left.
if (!FLAG_IS_CMDLINE(OldSize)) {
// The user has not specified any value but the ergonomics
// may have chosen a value (which may or may not be consistent
// with the overall heap size). In either case make
// the minimum, maximum and initial sizes consistent
// with the young sizes and the overall heap sizes.
_min_old_size = _gen_alignment;
_initial_old_size = MIN2(_max_old_size, MAX2(_initial_heap_byte_size - _initial_young_size, _min_old_size));
// _max_old_size has already been made consistent above.
} else {
// OldSize has been explicitly set on the command line. Use it
// for the initial size but make sure the minimum allow a young
// generation to fit as well.
// If the user has explicitly set an OldSize that is inconsistent
// with other command line flags, issue a warning.
// The generation minimums and the overall heap minimum should
// be within one generation alignment.
if (_initial_old_size > _max_old_size) {
log_warning(gc, ergo)("Inconsistency between maximum heap size and maximum "
"generation sizes: using maximum heap = " SIZE_FORMAT
", -XX:OldSize flag is being ignored",
_max_heap_byte_size);
_initial_old_size = _max_old_size;
}
_min_old_size = MIN2(_initial_old_size, _min_heap_byte_size - _min_young_size);
}
// The initial generation sizes should match the initial heap size,
// if not issue a warning and resize the generations. This behavior
// differs from JDK8 where the generation sizes have higher priority
// than the initial heap size.
if ((_initial_old_size + _initial_young_size) != _initial_heap_byte_size) {
log_warning(gc, ergo)("Inconsistency between generation sizes and heap size, resizing "
"the generations to fit the heap.");
size_t desired_young_size = _initial_heap_byte_size - _initial_old_size;
if (_initial_heap_byte_size < _initial_old_size) {
// Old want all memory, use minimum for young and rest for old
_initial_young_size = _min_young_size;
_initial_old_size = _initial_heap_byte_size - _min_young_size;
} else if (desired_young_size > _max_young_size) {
// Need to increase both young and old generation
_initial_young_size = _max_young_size;
_initial_old_size = _initial_heap_byte_size - _max_young_size;
} else if (desired_young_size < _min_young_size) {
// Need to decrease both young and old generation
_initial_young_size = _min_young_size;
_initial_old_size = _initial_heap_byte_size - _min_young_size;
} else {
// The young generation boundaries allow us to only update the
// young generation.
_initial_young_size = desired_young_size;
}
log_trace(gc, heap)("2: Minimum young " SIZE_FORMAT " Initial young " SIZE_FORMAT " Maximum young " SIZE_FORMAT,
_min_young_size, _initial_young_size, _max_young_size);
}
// Write back to flags if necessary.
if (NewSize != _initial_young_size) {
FLAG_SET_ERGO(size_t, NewSize, _initial_young_size);
}
if (MaxNewSize != _max_young_size) {
FLAG_SET_ERGO(size_t, MaxNewSize, _max_young_size);
}
if (OldSize != _initial_old_size) {
FLAG_SET_ERGO(size_t, OldSize, _initial_old_size);
}
log_trace(gc, heap)("Minimum old " SIZE_FORMAT " Initial old " SIZE_FORMAT " Maximum old " SIZE_FORMAT,
_min_old_size, _initial_old_size, _max_old_size);
DEBUG_ONLY(GenCollectorPolicy::assert_size_info();)
}
void GenCollectorPolicy::initialize_flags() {
CollectorPolicy::initialize_flags();
assert(_gen_alignment != 0, "Generation alignment not set up properly");
assert(_heap_alignment >= _gen_alignment,
"heap_alignment: " SIZE_FORMAT " less than gen_alignment: " SIZE_FORMAT,
_heap_alignment, _gen_alignment);
assert(_gen_alignment % _space_alignment == 0,
"gen_alignment: " SIZE_FORMAT " not aligned by space_alignment: " SIZE_FORMAT,
_gen_alignment, _space_alignment);
assert(_heap_alignment % _gen_alignment == 0,
"heap_alignment: " SIZE_FORMAT " not aligned by gen_alignment: " SIZE_FORMAT,
_heap_alignment, _gen_alignment);
// All generational heaps have a young gen; handle those flags here
// Make sure the heap is large enough for two generations
size_t smallest_new_size = young_gen_size_lower_bound();
size_t smallest_heap_size = align_size_up(smallest_new_size + old_gen_size_lower_bound(),
_heap_alignment);
if (MaxHeapSize < smallest_heap_size) {
FLAG_SET_ERGO(size_t, MaxHeapSize, smallest_heap_size);
_max_heap_byte_size = MaxHeapSize;
}
// If needed, synchronize _min_heap_byte size and _initial_heap_byte_size
if (_min_heap_byte_size < smallest_heap_size) {
_min_heap_byte_size = smallest_heap_size;
if (InitialHeapSize < _min_heap_byte_size) {
FLAG_SET_ERGO(size_t, InitialHeapSize, smallest_heap_size);
_initial_heap_byte_size = smallest_heap_size;
}
}
// Make sure NewSize allows an old generation to fit even if set on the command line
if (FLAG_IS_CMDLINE(NewSize) && NewSize >= _initial_heap_byte_size) {
log_warning(gc, ergo)("NewSize was set larger than initial heap size, will use initial heap size.");
FLAG_SET_ERGO(size_t, NewSize, bound_minus_alignment(NewSize, _initial_heap_byte_size));
}
// Now take the actual NewSize into account. We will silently increase NewSize
// if the user specified a smaller or unaligned value.
size_t bounded_new_size = bound_minus_alignment(NewSize, MaxHeapSize);
bounded_new_size = MAX2(smallest_new_size, (size_t)align_size_down(bounded_new_size, _gen_alignment));
if (bounded_new_size != NewSize) {
FLAG_SET_ERGO(size_t, NewSize, bounded_new_size);
}
_min_young_size = smallest_new_size;
_initial_young_size = NewSize;
if (!FLAG_IS_DEFAULT(MaxNewSize)) {
if (MaxNewSize >= MaxHeapSize) {
// Make sure there is room for an old generation
size_t smaller_max_new_size = MaxHeapSize - _gen_alignment;
if (FLAG_IS_CMDLINE(MaxNewSize)) {
log_warning(gc, ergo)("MaxNewSize (" SIZE_FORMAT "k) is equal to or greater than the entire "
"heap (" SIZE_FORMAT "k). A new max generation size of " SIZE_FORMAT "k will be used.",
MaxNewSize/K, MaxHeapSize/K, smaller_max_new_size/K);
}
FLAG_SET_ERGO(size_t, MaxNewSize, smaller_max_new_size);
if (NewSize > MaxNewSize) {
FLAG_SET_ERGO(size_t, NewSize, MaxNewSize);
_initial_young_size = NewSize;
}
} else if (MaxNewSize < _initial_young_size) {
FLAG_SET_ERGO(size_t, MaxNewSize, _initial_young_size);
} else if (!is_size_aligned(MaxNewSize, _gen_alignment)) {
FLAG_SET_ERGO(size_t, MaxNewSize, align_size_down(MaxNewSize, _gen_alignment));
}
_max_young_size = MaxNewSize;
}
if (NewSize > MaxNewSize) {
// At this point this should only happen if the user specifies a large NewSize and/or
// a small (but not too small) MaxNewSize.
if (FLAG_IS_CMDLINE(MaxNewSize)) {
log_warning(gc, ergo)("NewSize (" SIZE_FORMAT "k) is greater than the MaxNewSize (" SIZE_FORMAT "k). "
"A new max generation size of " SIZE_FORMAT "k will be used.",
NewSize/K, MaxNewSize/K, NewSize/K);
}
FLAG_SET_ERGO(size_t, MaxNewSize, NewSize);
_max_young_size = MaxNewSize;
}
if (SurvivorRatio < 1 || NewRatio < 1) {
vm_exit_during_initialization("Invalid young gen ratio specified");
}
if (OldSize < old_gen_size_lower_bound()) {
FLAG_SET_ERGO(size_t, OldSize, old_gen_size_lower_bound());
}
if (!is_size_aligned(OldSize, _gen_alignment)) {
FLAG_SET_ERGO(size_t, OldSize, align_size_down(OldSize, _gen_alignment));
}
if (FLAG_IS_CMDLINE(OldSize) && FLAG_IS_DEFAULT(MaxHeapSize)) {
// NewRatio will be used later to set the young generation size so we use
// it to calculate how big the heap should be based on the requested OldSize
// and NewRatio.
assert(NewRatio > 0, "NewRatio should have been set up earlier");
size_t calculated_heapsize = (OldSize / NewRatio) * (NewRatio + 1);
calculated_heapsize = align_size_up(calculated_heapsize, _heap_alignment);
FLAG_SET_ERGO(size_t, MaxHeapSize, calculated_heapsize);
_max_heap_byte_size = MaxHeapSize;
FLAG_SET_ERGO(size_t, InitialHeapSize, calculated_heapsize);
_initial_heap_byte_size = InitialHeapSize;
}
// Adjust NewSize and OldSize or MaxHeapSize to match each other
if (NewSize + OldSize > MaxHeapSize) {
if (FLAG_IS_CMDLINE(MaxHeapSize)) {
// Somebody has set a maximum heap size with the intention that we should not
// exceed it. Adjust New/OldSize as necessary.
size_t calculated_size = NewSize + OldSize;
double shrink_factor = (double) MaxHeapSize / calculated_size;
size_t smaller_new_size = align_size_down((size_t)(NewSize * shrink_factor), _gen_alignment);
FLAG_SET_ERGO(size_t, NewSize, MAX2(young_gen_size_lower_bound(), smaller_new_size));
_initial_young_size = NewSize;
// OldSize is already aligned because above we aligned MaxHeapSize to
// _heap_alignment, and we just made sure that NewSize is aligned to
// _gen_alignment. In initialize_flags() we verified that _heap_alignment
// is a multiple of _gen_alignment.
FLAG_SET_ERGO(size_t, OldSize, MaxHeapSize - NewSize);
} else {
FLAG_SET_ERGO(size_t, MaxHeapSize, align_size_up(NewSize + OldSize, _heap_alignment));
_max_heap_byte_size = MaxHeapSize;
}
}
// Update NewSize, if possible, to avoid sizing the young gen too small when only
// OldSize is set on the command line.
if (FLAG_IS_CMDLINE(OldSize) && !FLAG_IS_CMDLINE(NewSize)) {
if (OldSize < _initial_heap_byte_size) {
size_t new_size = _initial_heap_byte_size - OldSize;
// Need to compare against the flag value for max since _max_young_size
// might not have been set yet.
if (new_size >= _min_young_size && new_size <= MaxNewSize) {
FLAG_SET_ERGO(size_t, NewSize, new_size);
_initial_young_size = NewSize;
}
}
}
always_do_update_barrier = UseConcMarkSweepGC;
DEBUG_ONLY(GenCollectorPolicy::assert_flags();)
}
// Values set on the command line win over any ergonomically
// set command line parameters.
// Ergonomic choice of parameters are done before this
// method is called. Values for command line parameters such as NewSize
// and MaxNewSize feed those ergonomic choices into this method.
// This method makes the final generation sizings consistent with
// themselves and with overall heap sizings.
// In the absence of explicitly set command line flags, policies
// such as the use of NewRatio are used to size the generation.
void GenCollectorPolicy::initialize_size_info() {
CollectorPolicy::initialize_size_info();
// _space_alignment is used for alignment within a generation.
// There is additional alignment done down stream for some
// collectors that sometimes causes unwanted rounding up of
// generations sizes.
// Determine maximum size of gen0
size_t max_new_size = 0;
if (!FLAG_IS_DEFAULT(MaxNewSize)) {
max_new_size = MaxNewSize;
} else {
max_new_size = scale_by_NewRatio_aligned(_max_heap_byte_size);
// Bound the maximum size by NewSize below (since it historically
// would have been NewSize and because the NewRatio calculation could
// yield a size that is too small) and bound it by MaxNewSize above.
// Ergonomics plays here by previously calculating the desired
// NewSize and MaxNewSize.
max_new_size = MIN2(MAX2(max_new_size, NewSize), MaxNewSize);
}
assert(max_new_size > 0, "All paths should set max_new_size");
// Given the maximum gen0 size, determine the initial and
// minimum gen0 sizes.
if (_max_heap_byte_size == _min_heap_byte_size) {
// The maximum and minimum heap sizes are the same so
// the generations minimum and initial must be the
// same as its maximum.
_min_gen0_size = max_new_size;
_initial_gen0_size = max_new_size;
_max_gen0_size = max_new_size;
} else {
size_t desired_new_size = 0;
if (FLAG_IS_CMDLINE(NewSize)) {
// If NewSize is set on the command line, we must use it as
// the initial size and it also makes sense to use it as the
// lower limit.
_min_gen0_size = NewSize;
desired_new_size = NewSize;
max_new_size = MAX2(max_new_size, NewSize);
} else if (FLAG_IS_ERGO(NewSize)) {
// If NewSize is set ergonomically, we should use it as a lower
// limit, but use NewRatio to calculate the initial size.
_min_gen0_size = NewSize;
desired_new_size =
MAX2(scale_by_NewRatio_aligned(_initial_heap_byte_size), NewSize);
max_new_size = MAX2(max_new_size, NewSize);
} else {
// For the case where NewSize is the default, use NewRatio
// to size the minimum and initial generation sizes.
// Use the default NewSize as the floor for these values. If
// NewRatio is overly large, the resulting sizes can be too
// small.
_min_gen0_size = MAX2(scale_by_NewRatio_aligned(_min_heap_byte_size), NewSize);
desired_new_size =
MAX2(scale_by_NewRatio_aligned(_initial_heap_byte_size), NewSize);
}
assert(_min_gen0_size > 0, "Sanity check");
_initial_gen0_size = desired_new_size;
_max_gen0_size = max_new_size;
// At this point the desirable initial and minimum sizes have been
// determined without regard to the maximum sizes.
// Bound the sizes by the corresponding overall heap sizes.
_min_gen0_size = bound_minus_alignment(_min_gen0_size, _min_heap_byte_size);
_initial_gen0_size = bound_minus_alignment(_initial_gen0_size, _initial_heap_byte_size);
_max_gen0_size = bound_minus_alignment(_max_gen0_size, _max_heap_byte_size);
// At this point all three sizes have been checked against the
// maximum sizes but have not been checked for consistency
// among the three.
// Final check min <= initial <= max
_min_gen0_size = MIN2(_min_gen0_size, _max_gen0_size);
_initial_gen0_size = MAX2(MIN2(_initial_gen0_size, _max_gen0_size), _min_gen0_size);
_min_gen0_size = MIN2(_min_gen0_size, _initial_gen0_size);
}
// Write back to flags if necessary
if (NewSize != _initial_gen0_size) {
FLAG_SET_ERGO(uintx, NewSize, _initial_gen0_size);
}
if (MaxNewSize != _max_gen0_size) {
FLAG_SET_ERGO(uintx, MaxNewSize, _max_gen0_size);
}
if (PrintGCDetails && Verbose) {
gclog_or_tty->print_cr("1: Minimum gen0 " SIZE_FORMAT " Initial gen0 "
SIZE_FORMAT " Maximum gen0 " SIZE_FORMAT,
_min_gen0_size, _initial_gen0_size, _max_gen0_size);
}
DEBUG_ONLY(GenCollectorPolicy::assert_size_info();)
}
void TwoGenerationCollectorPolicy::initialize_size_info() {
GenCollectorPolicy::initialize_size_info();
// At this point the minimum, initial and maximum sizes
// of the overall heap and of gen0 have been determined.
// The maximum gen1 size can be determined from the maximum gen0
// and maximum heap size since no explicit flags exits
// for setting the gen1 maximum.
_max_gen1_size = MAX2(_max_heap_byte_size - _max_gen0_size, _gen_alignment);
// If no explicit command line flag has been set for the
// gen1 size, use what is left for gen1.
if (!FLAG_IS_CMDLINE(OldSize)) {
// The user has not specified any value but the ergonomics
// may have chosen a value (which may or may not be consistent
// with the overall heap size). In either case make
// the minimum, maximum and initial sizes consistent
// with the gen0 sizes and the overall heap sizes.
_min_gen1_size = MAX2(_min_heap_byte_size - _min_gen0_size, _gen_alignment);
_initial_gen1_size = MAX2(_initial_heap_byte_size - _initial_gen0_size, _gen_alignment);
// _max_gen1_size has already been made consistent above
FLAG_SET_ERGO(uintx, OldSize, _initial_gen1_size);
} else {
// It's been explicitly set on the command line. Use the
// OldSize and then determine the consequences.
_min_gen1_size = MIN2(OldSize, _min_heap_byte_size - _min_gen0_size);
_initial_gen1_size = OldSize;
// If the user has explicitly set an OldSize that is inconsistent
// with other command line flags, issue a warning.
// The generation minimums and the overall heap mimimum should
// be within one generation alignment.
if ((_min_gen1_size + _min_gen0_size + _gen_alignment) < _min_heap_byte_size) {
warning("Inconsistency between minimum heap size and minimum "
"generation sizes: using minimum heap = " SIZE_FORMAT,
_min_heap_byte_size);
}
if (OldSize > _max_gen1_size) {
warning("Inconsistency between maximum heap size and maximum "
"generation sizes: using maximum heap = " SIZE_FORMAT
" -XX:OldSize flag is being ignored",
_max_heap_byte_size);
}
// If there is an inconsistency between the OldSize and the minimum and/or
// initial size of gen0, since OldSize was explicitly set, OldSize wins.
if (adjust_gen0_sizes(&_min_gen0_size, &_min_gen1_size, _min_heap_byte_size)) {
if (PrintGCDetails && Verbose) {
gclog_or_tty->print_cr("2: Minimum gen0 " SIZE_FORMAT " Initial gen0 "
SIZE_FORMAT " Maximum gen0 " SIZE_FORMAT,
_min_gen0_size, _initial_gen0_size, _max_gen0_size);
}
}
// Initial size
if (adjust_gen0_sizes(&_initial_gen0_size, &_initial_gen1_size,
_initial_heap_byte_size)) {
if (PrintGCDetails && Verbose) {
gclog_or_tty->print_cr("3: Minimum gen0 " SIZE_FORMAT " Initial gen0 "
SIZE_FORMAT " Maximum gen0 " SIZE_FORMAT,
_min_gen0_size, _initial_gen0_size, _max_gen0_size);
}
}
}
// Enforce the maximum gen1 size.
_min_gen1_size = MIN2(_min_gen1_size, _max_gen1_size);
// Check that min gen1 <= initial gen1 <= max gen1
_initial_gen1_size = MAX2(_initial_gen1_size, _min_gen1_size);
_initial_gen1_size = MIN2(_initial_gen1_size, _max_gen1_size);
// Write back to flags if necessary
if (NewSize != _initial_gen0_size) {
FLAG_SET_ERGO(uintx, NewSize, _initial_gen0_size);
}
if (MaxNewSize != _max_gen0_size) {
FLAG_SET_ERGO(uintx, MaxNewSize, _max_gen0_size);
}
if (OldSize != _initial_gen1_size) {
FLAG_SET_ERGO(uintx, OldSize, _initial_gen1_size);
}
if (PrintGCDetails && Verbose) {
gclog_or_tty->print_cr("Minimum gen1 " SIZE_FORMAT " Initial gen1 "
SIZE_FORMAT " Maximum gen1 " SIZE_FORMAT,
_min_gen1_size, _initial_gen1_size, _max_gen1_size);
}
DEBUG_ONLY(TwoGenerationCollectorPolicy::assert_size_info();)
}
void CodeCache::initialize_heaps() {
// Determine size of compiler buffers
size_t code_buffers_size = 0;
#ifdef COMPILER1
// C1 temporary code buffers (see Compiler::init_buffer_blob())
const int c1_count = CompilationPolicy::policy()->compiler_count(CompLevel_simple);
code_buffers_size += c1_count * Compiler::code_buffer_size();
#endif
#ifdef COMPILER2
// C2 scratch buffers (see Compile::init_scratch_buffer_blob())
const int c2_count = CompilationPolicy::policy()->compiler_count(CompLevel_full_optimization);
// Initial size of constant table (this may be increased if a compiled method needs more space)
code_buffers_size += c2_count * C2Compiler::initial_code_buffer_size();
#endif
// Calculate default CodeHeap sizes if not set by user
if (!FLAG_IS_CMDLINE(NonNMethodCodeHeapSize) && !FLAG_IS_CMDLINE(ProfiledCodeHeapSize)
&& !FLAG_IS_CMDLINE(NonProfiledCodeHeapSize)) {
// Increase default NonNMethodCodeHeapSize to account for compiler buffers
FLAG_SET_ERGO(uintx, NonNMethodCodeHeapSize, NonNMethodCodeHeapSize + code_buffers_size);
// Check if we have enough space for the non-nmethod code heap
if (ReservedCodeCacheSize > NonNMethodCodeHeapSize) {
// Use the default value for NonNMethodCodeHeapSize and one half of the
// remaining size for non-profiled methods and one half for profiled methods
size_t remaining_size = ReservedCodeCacheSize - NonNMethodCodeHeapSize;
size_t profiled_size = remaining_size / 2;
size_t non_profiled_size = remaining_size - profiled_size;
FLAG_SET_ERGO(uintx, ProfiledCodeHeapSize, profiled_size);
FLAG_SET_ERGO(uintx, NonProfiledCodeHeapSize, non_profiled_size);
} else {
// Use all space for the non-nmethod heap and set other heaps to minimal size
FLAG_SET_ERGO(uintx, NonNMethodCodeHeapSize, ReservedCodeCacheSize - os::vm_page_size() * 2);
FLAG_SET_ERGO(uintx, ProfiledCodeHeapSize, os::vm_page_size());
FLAG_SET_ERGO(uintx, NonProfiledCodeHeapSize, os::vm_page_size());
}
}
// We do not need the profiled CodeHeap, use all space for the non-profiled CodeHeap
if(!heap_available(CodeBlobType::MethodProfiled)) {
FLAG_SET_ERGO(uintx, NonProfiledCodeHeapSize, NonProfiledCodeHeapSize + ProfiledCodeHeapSize);
FLAG_SET_ERGO(uintx, ProfiledCodeHeapSize, 0);
}
// We do not need the non-profiled CodeHeap, use all space for the non-nmethod CodeHeap
if(!heap_available(CodeBlobType::MethodNonProfiled)) {
FLAG_SET_ERGO(uintx, NonNMethodCodeHeapSize, NonNMethodCodeHeapSize + NonProfiledCodeHeapSize);
FLAG_SET_ERGO(uintx, NonProfiledCodeHeapSize, 0);
}
// Make sure we have enough space for VM internal code
uint min_code_cache_size = CodeCacheMinimumUseSpace DEBUG_ONLY(* 3);
if (NonNMethodCodeHeapSize < (min_code_cache_size + code_buffers_size)) {
vm_exit_during_initialization("Not enough space in non-nmethod code heap to run VM.");
}
guarantee(NonProfiledCodeHeapSize + ProfiledCodeHeapSize + NonNMethodCodeHeapSize <= ReservedCodeCacheSize, "Size check");
// Align CodeHeaps
size_t alignment = heap_alignment();
size_t non_method_size = align_size_up(NonNMethodCodeHeapSize, alignment);
size_t profiled_size = align_size_down(ProfiledCodeHeapSize, alignment);
// Reserve one continuous chunk of memory for CodeHeaps and split it into
// parts for the individual heaps. The memory layout looks like this:
// ---------- high -----------
// Non-profiled nmethods
// Profiled nmethods
// Non-nmethods
// ---------- low ------------
ReservedCodeSpace rs = reserve_heap_memory(ReservedCodeCacheSize);
ReservedSpace non_method_space = rs.first_part(non_method_size);
ReservedSpace rest = rs.last_part(non_method_size);
ReservedSpace profiled_space = rest.first_part(profiled_size);
ReservedSpace non_profiled_space = rest.last_part(profiled_size);
// Non-nmethods (stubs, adapters, ...)
add_heap(non_method_space, "CodeHeap 'non-nmethods'", CodeBlobType::NonNMethod);
// Tier 2 and tier 3 (profiled) methods
add_heap(profiled_space, "CodeHeap 'profiled nmethods'", CodeBlobType::MethodProfiled);
// Tier 1 and tier 4 (non-profiled) methods and native methods
add_heap(non_profiled_space, "CodeHeap 'non-profiled nmethods'", CodeBlobType::MethodNonProfiled);
}
void VM_Version::initialize() {
_features = determine_features();
PrefetchCopyIntervalInBytes = prefetch_copy_interval_in_bytes();
PrefetchScanIntervalInBytes = prefetch_scan_interval_in_bytes();
PrefetchFieldsAhead = prefetch_fields_ahead();
assert(0 <= AllocatePrefetchInstr && AllocatePrefetchInstr <= 1, "invalid value");
if( AllocatePrefetchInstr < 0 ) AllocatePrefetchInstr = 0;
if( AllocatePrefetchInstr > 1 ) AllocatePrefetchInstr = 0;
// Allocation prefetch settings
intx cache_line_size = prefetch_data_size();
if( cache_line_size > AllocatePrefetchStepSize )
AllocatePrefetchStepSize = cache_line_size;
assert(AllocatePrefetchLines > 0, "invalid value");
if( AllocatePrefetchLines < 1 ) // set valid value in product VM
AllocatePrefetchLines = 3;
assert(AllocateInstancePrefetchLines > 0, "invalid value");
if( AllocateInstancePrefetchLines < 1 ) // set valid value in product VM
AllocateInstancePrefetchLines = 1;
AllocatePrefetchDistance = allocate_prefetch_distance();
AllocatePrefetchStyle = allocate_prefetch_style();
assert((AllocatePrefetchDistance % AllocatePrefetchStepSize) == 0 &&
(AllocatePrefetchDistance > 0), "invalid value");
if ((AllocatePrefetchDistance % AllocatePrefetchStepSize) != 0 ||
(AllocatePrefetchDistance <= 0)) {
AllocatePrefetchDistance = AllocatePrefetchStepSize;
}
if (AllocatePrefetchStyle == 3 && !has_blk_init()) {
warning("BIS instructions are not available on this CPU");
FLAG_SET_DEFAULT(AllocatePrefetchStyle, 1);
}
guarantee(VM_Version::has_v9(), "only SPARC v9 is supported");
assert(ArraycopySrcPrefetchDistance < 4096, "invalid value");
if (ArraycopySrcPrefetchDistance >= 4096)
ArraycopySrcPrefetchDistance = 4064;
assert(ArraycopyDstPrefetchDistance < 4096, "invalid value");
if (ArraycopyDstPrefetchDistance >= 4096)
ArraycopyDstPrefetchDistance = 4064;
UseSSE = 0; // Only on x86 and x64
_supports_cx8 = has_v9();
_supports_atomic_getset4 = true; // swap instruction
// There are Fujitsu Sparc64 CPUs which support blk_init as well so
// we have to take this check out of the 'is_niagara()' block below.
if (has_blk_init()) {
// When using CMS or G1, we cannot use memset() in BOT updates
// because the sun4v/CMT version in libc_psr uses BIS which
// exposes "phantom zeros" to concurrent readers. See 6948537.
if (FLAG_IS_DEFAULT(UseMemSetInBOT) && (UseConcMarkSweepGC || UseG1GC)) {
FLAG_SET_DEFAULT(UseMemSetInBOT, false);
}
// Issue a stern warning if the user has explicitly set
// UseMemSetInBOT (it is known to cause issues), but allow
// use for experimentation and debugging.
if (UseConcMarkSweepGC || UseG1GC) {
if (UseMemSetInBOT) {
assert(!FLAG_IS_DEFAULT(UseMemSetInBOT), "Error");
warning("Experimental flag -XX:+UseMemSetInBOT is known to cause instability"
" on sun4v; please understand that you are using at your own risk!");
}
}
}
if (is_niagara()) {
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseInlineCaches)) {
FLAG_SET_DEFAULT(UseInlineCaches, false);
}
// Align loops on a single instruction boundary.
if (FLAG_IS_DEFAULT(OptoLoopAlignment)) {
FLAG_SET_DEFAULT(OptoLoopAlignment, 4);
}
#ifdef _LP64
// 32-bit oops don't make sense for the 64-bit VM on sparc
// since the 32-bit VM has the same registers and smaller objects.
Universe::set_narrow_oop_shift(LogMinObjAlignmentInBytes);
Universe::set_narrow_klass_shift(LogKlassAlignmentInBytes);
#endif // _LP64
#ifdef COMPILER2
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseJumpTables)) {
FLAG_SET_DEFAULT(UseJumpTables, true);
}
// Single-issue, so entry and loop tops are
// aligned on a single instruction boundary
if (FLAG_IS_DEFAULT(InteriorEntryAlignment)) {
FLAG_SET_DEFAULT(InteriorEntryAlignment, 4);
}
if (is_niagara_plus()) {
if (has_blk_init() && UseTLAB &&
FLAG_IS_DEFAULT(AllocatePrefetchInstr)) {
// Use BIS instruction for TLAB allocation prefetch.
FLAG_SET_ERGO(intx, AllocatePrefetchInstr, 1);
if (FLAG_IS_DEFAULT(AllocatePrefetchStyle)) {
FLAG_SET_ERGO(intx, AllocatePrefetchStyle, 3);
}
if (FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use smaller prefetch distance with BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 64);
}
}
if (is_T4()) {
// Double number of prefetched cache lines on T4
// since L2 cache line size is smaller (32 bytes).
if (FLAG_IS_DEFAULT(AllocatePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocatePrefetchLines, AllocatePrefetchLines*2);
}
if (FLAG_IS_DEFAULT(AllocateInstancePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocateInstancePrefetchLines, AllocateInstancePrefetchLines*2);
}
}
if (AllocatePrefetchStyle != 3 && FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use different prefetch distance without BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 256);
}
if (AllocatePrefetchInstr == 1) {
// Need a space at the end of TLAB for BIS since it
// will fault when accessing memory outside of heap.
// +1 for rounding up to next cache line, +1 to be safe
int lines = AllocatePrefetchLines + 2;
int step_size = AllocatePrefetchStepSize;
int distance = AllocatePrefetchDistance;
_reserve_for_allocation_prefetch = (distance + step_size*lines)/(int)HeapWordSize;
}
}
#endif
}
// Use hardware population count instruction if available.
if (has_hardware_popc()) {
if (FLAG_IS_DEFAULT(UsePopCountInstruction)) {
FLAG_SET_DEFAULT(UsePopCountInstruction, true);
}
} else if (UsePopCountInstruction) {
warning("POPC instruction is not available on this CPU");
FLAG_SET_DEFAULT(UsePopCountInstruction, false);
}
// T4 and newer Sparc cpus have new compare and branch instruction.
if (has_cbcond()) {
if (FLAG_IS_DEFAULT(UseCBCond)) {
FLAG_SET_DEFAULT(UseCBCond, true);
}
} else if (UseCBCond) {
warning("CBCOND instruction is not available on this CPU");
FLAG_SET_DEFAULT(UseCBCond, false);
}
assert(BlockZeroingLowLimit > 0, "invalid value");
if (has_block_zeroing()) {
if (FLAG_IS_DEFAULT(UseBlockZeroing)) {
FLAG_SET_DEFAULT(UseBlockZeroing, true);
}
} else if (UseBlockZeroing) {
warning("BIS zeroing instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseBlockZeroing, false);
}
assert(BlockCopyLowLimit > 0, "invalid value");
if (has_block_zeroing()) { // has_blk_init() && is_T4(): core's local L2 cache
if (FLAG_IS_DEFAULT(UseBlockCopy)) {
FLAG_SET_DEFAULT(UseBlockCopy, true);
}
} else if (UseBlockCopy) {
warning("BIS instructions are not available or expensive on this CPU");
FLAG_SET_DEFAULT(UseBlockCopy, false);
}
#ifdef COMPILER2
// T4 and newer Sparc cpus have fast RDPC.
if (has_fast_rdpc() && FLAG_IS_DEFAULT(UseRDPCForConstantTableBase)) {
FLAG_SET_DEFAULT(UseRDPCForConstantTableBase, true);
}
// Currently not supported anywhere.
FLAG_SET_DEFAULT(UseFPUForSpilling, false);
MaxVectorSize = 8;
assert((InteriorEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
#endif
assert((CodeEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
assert((OptoLoopAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
char buf[512];
jio_snprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
(has_v9() ? ", v9" : (has_v8() ? ", v8" : "")),
(has_hardware_popc() ? ", popc" : ""),
(has_vis1() ? ", vis1" : ""),
(has_vis2() ? ", vis2" : ""),
(has_vis3() ? ", vis3" : ""),
(has_blk_init() ? ", blk_init" : ""),
(has_cbcond() ? ", cbcond" : ""),
(has_aes() ? ", aes" : ""),
(is_ultra3() ? ", ultra3" : ""),
(is_sun4v() ? ", sun4v" : ""),
(is_niagara_plus() ? ", niagara_plus" : (is_niagara() ? ", niagara" : "")),
(is_sparc64() ? ", sparc64" : ""),
(!has_hardware_mul32() ? ", no-mul32" : ""),
(!has_hardware_div32() ? ", no-div32" : ""),
(!has_hardware_fsmuld() ? ", no-fsmuld" : ""));
// buf is started with ", " or is empty
_features_str = strdup(strlen(buf) > 2 ? buf + 2 : buf);
// UseVIS is set to the smallest of what hardware supports and what
// the command line requires. I.e., you cannot set UseVIS to 3 on
// older UltraSparc which do not support it.
if (UseVIS > 3) UseVIS=3;
if (UseVIS < 0) UseVIS=0;
if (!has_vis3()) // Drop to 2 if no VIS3 support
UseVIS = MIN2((intx)2,UseVIS);
if (!has_vis2()) // Drop to 1 if no VIS2 support
UseVIS = MIN2((intx)1,UseVIS);
if (!has_vis1()) // Drop to 0 if no VIS1 support
UseVIS = 0;
// T2 and above should have support for AES instructions
if (has_aes()) {
if (UseVIS > 0) { // AES intrinsics use FXOR instruction which is VIS1
if (FLAG_IS_DEFAULT(UseAES)) {
FLAG_SET_DEFAULT(UseAES, true);
}
if (FLAG_IS_DEFAULT(UseAESIntrinsics)) {
FLAG_SET_DEFAULT(UseAESIntrinsics, true);
}
// we disable both the AES flags if either of them is disabled on the command line
if (!UseAES || !UseAESIntrinsics) {
FLAG_SET_DEFAULT(UseAES, false);
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
} else {
if (UseAES || UseAESIntrinsics) {
warning("SPARC AES intrinsics require VIS1 instruction support. Intrinsics will be disabled.");
if (UseAES) {
FLAG_SET_DEFAULT(UseAES, false);
}
if (UseAESIntrinsics) {
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
}
} else if (UseAES || UseAESIntrinsics) {
warning("AES instructions are not available on this CPU");
if (UseAES) {
FLAG_SET_DEFAULT(UseAES, false);
}
if (UseAESIntrinsics) {
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
if (FLAG_IS_DEFAULT(ContendedPaddingWidth) &&
(cache_line_size > ContendedPaddingWidth))
ContendedPaddingWidth = cache_line_size;
#ifndef PRODUCT
if (PrintMiscellaneous && Verbose) {
tty->print("Allocation");
if (AllocatePrefetchStyle <= 0) {
tty->print_cr(": no prefetching");
} else {
tty->print(" prefetching: ");
if (AllocatePrefetchInstr == 0) {
tty->print("PREFETCH");
} else if (AllocatePrefetchInstr == 1) {
tty->print("BIS");
}
if (AllocatePrefetchLines > 1) {
tty->print_cr(" at distance %d, %d lines of %d bytes", AllocatePrefetchDistance, AllocatePrefetchLines, AllocatePrefetchStepSize);
} else {
tty->print_cr(" at distance %d, one line of %d bytes", AllocatePrefetchDistance, AllocatePrefetchStepSize);
}
}
if (PrefetchCopyIntervalInBytes > 0) {
tty->print_cr("PrefetchCopyIntervalInBytes %d", PrefetchCopyIntervalInBytes);
}
if (PrefetchScanIntervalInBytes > 0) {
tty->print_cr("PrefetchScanIntervalInBytes %d", PrefetchScanIntervalInBytes);
}
if (PrefetchFieldsAhead > 0) {
tty->print_cr("PrefetchFieldsAhead %d", PrefetchFieldsAhead);
}
if (ContendedPaddingWidth > 0) {
tty->print_cr("ContendedPaddingWidth %d", ContendedPaddingWidth);
}
}
#endif // PRODUCT
}
void CodeCache::initialize_heaps() {
bool non_nmethod_set = FLAG_IS_CMDLINE(NonNMethodCodeHeapSize);
bool profiled_set = FLAG_IS_CMDLINE(ProfiledCodeHeapSize);
bool non_profiled_set = FLAG_IS_CMDLINE(NonProfiledCodeHeapSize);
size_t min_size = os::vm_page_size();
size_t cache_size = ReservedCodeCacheSize;
size_t non_nmethod_size = NonNMethodCodeHeapSize;
size_t profiled_size = ProfiledCodeHeapSize;
size_t non_profiled_size = NonProfiledCodeHeapSize;
// Check if total size set via command line flags exceeds the reserved size
check_heap_sizes((non_nmethod_set ? non_nmethod_size : min_size),
(profiled_set ? profiled_size : min_size),
(non_profiled_set ? non_profiled_size : min_size),
cache_size,
non_nmethod_set && profiled_set && non_profiled_set);
// Determine size of compiler buffers
size_t code_buffers_size = 0;
#ifdef COMPILER1
// C1 temporary code buffers (see Compiler::init_buffer_blob())
const int c1_count = CompilationPolicy::policy()->compiler_count(CompLevel_simple);
code_buffers_size += c1_count * Compiler::code_buffer_size();
#endif
#ifdef COMPILER2
// C2 scratch buffers (see Compile::init_scratch_buffer_blob())
const int c2_count = CompilationPolicy::policy()->compiler_count(CompLevel_full_optimization);
// Initial size of constant table (this may be increased if a compiled method needs more space)
code_buffers_size += c2_count * C2Compiler::initial_code_buffer_size();
#endif
// Increase default non_nmethod_size to account for compiler buffers
if (!non_nmethod_set) {
non_nmethod_size += code_buffers_size;
}
// Calculate default CodeHeap sizes if not set by user
if (!non_nmethod_set && !profiled_set && !non_profiled_set) {
// Check if we have enough space for the non-nmethod code heap
if (cache_size > non_nmethod_size) {
// Use the default value for non_nmethod_size and one half of the
// remaining size for non-profiled and one half for profiled methods
size_t remaining_size = cache_size - non_nmethod_size;
profiled_size = remaining_size / 2;
non_profiled_size = remaining_size - profiled_size;
} else {
// Use all space for the non-nmethod heap and set other heaps to minimal size
non_nmethod_size = cache_size - 2 * min_size;
profiled_size = min_size;
non_profiled_size = min_size;
}
} else if (!non_nmethod_set || !profiled_set || !non_profiled_set) {
// The user explicitly set some code heap sizes. Increase or decrease the (default)
// sizes of the other code heaps accordingly. First adapt non-profiled and profiled
// code heap sizes and then only change non-nmethod code heap size if still necessary.
intx diff_size = cache_size - (non_nmethod_size + profiled_size + non_profiled_size);
if (non_profiled_set) {
if (!profiled_set) {
// Adapt size of profiled code heap
if (diff_size < 0 && ((intx)profiled_size + diff_size) <= 0) {
// Not enough space available, set to minimum size
diff_size += profiled_size - min_size;
profiled_size = min_size;
} else {
profiled_size += diff_size;
diff_size = 0;
}
}
} else if (profiled_set) {
// Adapt size of non-profiled code heap
if (diff_size < 0 && ((intx)non_profiled_size + diff_size) <= 0) {
// Not enough space available, set to minimum size
diff_size += non_profiled_size - min_size;
non_profiled_size = min_size;
} else {
non_profiled_size += diff_size;
diff_size = 0;
}
} else if (non_nmethod_set) {
// Distribute remaining size between profiled and non-profiled code heaps
diff_size = cache_size - non_nmethod_size;
profiled_size = diff_size / 2;
non_profiled_size = diff_size - profiled_size;
diff_size = 0;
}
if (diff_size != 0) {
// Use non-nmethod code heap for remaining space requirements
assert(!non_nmethod_set && ((intx)non_nmethod_size + diff_size) > 0, "sanity");
non_nmethod_size += diff_size;
}
}
// We do not need the profiled CodeHeap, use all space for the non-profiled CodeHeap
if(!heap_available(CodeBlobType::MethodProfiled)) {
non_profiled_size += profiled_size;
profiled_size = 0;
}
// We do not need the non-profiled CodeHeap, use all space for the non-nmethod CodeHeap
if(!heap_available(CodeBlobType::MethodNonProfiled)) {
non_nmethod_size += non_profiled_size;
non_profiled_size = 0;
}
// Make sure we have enough space for VM internal code
uint min_code_cache_size = CodeCacheMinimumUseSpace DEBUG_ONLY(* 3);
if (non_nmethod_size < (min_code_cache_size + code_buffers_size)) {
vm_exit_during_initialization(err_msg(
"Not enough space in non-nmethod code heap to run VM: %zuK < %zuK",
non_nmethod_size/K, (min_code_cache_size + code_buffers_size)/K));
}
// Verify sizes and update flag values
assert(non_profiled_size + profiled_size + non_nmethod_size == cache_size, "Invalid code heap sizes");
FLAG_SET_ERGO(uintx, NonNMethodCodeHeapSize, non_nmethod_size);
FLAG_SET_ERGO(uintx, ProfiledCodeHeapSize, profiled_size);
FLAG_SET_ERGO(uintx, NonProfiledCodeHeapSize, non_profiled_size);
// Align CodeHeaps
size_t alignment = heap_alignment();
non_nmethod_size = align_size_up(non_nmethod_size, alignment);
profiled_size = align_size_down(profiled_size, alignment);
// Reserve one continuous chunk of memory for CodeHeaps and split it into
// parts for the individual heaps. The memory layout looks like this:
// ---------- high -----------
// Non-profiled nmethods
// Profiled nmethods
// Non-nmethods
// ---------- low ------------
ReservedCodeSpace rs = reserve_heap_memory(cache_size);
ReservedSpace non_method_space = rs.first_part(non_nmethod_size);
ReservedSpace rest = rs.last_part(non_nmethod_size);
ReservedSpace profiled_space = rest.first_part(profiled_size);
ReservedSpace non_profiled_space = rest.last_part(profiled_size);
// Non-nmethods (stubs, adapters, ...)
add_heap(non_method_space, "CodeHeap 'non-nmethods'", CodeBlobType::NonNMethod);
// Tier 2 and tier 3 (profiled) methods
add_heap(profiled_space, "CodeHeap 'profiled nmethods'", CodeBlobType::MethodProfiled);
// Tier 1 and tier 4 (non-profiled) methods and native methods
add_heap(non_profiled_space, "CodeHeap 'non-profiled nmethods'", CodeBlobType::MethodNonProfiled);
}
