C++ (Cpp) FREE_HTTX_RING示例

示例#1

0

显示文件

文件： rt_usb.c 项目： 0x000000FF/MT7601u

static void rtusb_dataout_complete(unsigned long data)
{
	PRTMP_ADAPTER		pAd;
	purbb_t				pUrb;
	POS_COOKIE			pObj;
	PHT_TX_CONTEXT		pHTTXContext;
	UCHAR				BulkOutPipeId;
	NTSTATUS			Status;
	unsigned long		IrqFlags;


	pUrb			= (purbb_t)data;
/*	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context; */
	pHTTXContext	= (PHT_TX_CONTEXT)RTMP_USB_URB_DATA_GET(pUrb);
	Status			= RTMP_USB_URB_STATUS_GET(pUrb);
	pAd				= pHTTXContext->pAd;
	pObj 			= (POS_COOKIE) pAd->OS_Cookie;
/*	Status			= pUrb->status; */

	/* Store BulkOut PipeId */
	BulkOutPipeId = pHTTXContext->BulkOutPipeId;
	pAd->BulkOutDataOneSecCount++;

	/*DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition, */
	/*		pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); */

	RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
	pHTTXContext->IRPPending = FALSE;
	pAd->watchDogTxPendingCnt[BulkOutPipeId] = 0;
	
	if (Status == USB_ST_NOERROR)
	{	
		pAd->BulkOutComplete++;

		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
	
		pAd->Counters8023.GoodTransmits++;
		/*RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */
		FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext);			
		/*RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */

#ifdef UAPSD_SUPPORT
#ifdef DOT11Z_TDLS_SUPPORT
		UAPSD_UnTagFrame(pAd, BulkOutPipeId, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition);
#else
#ifdef CONFIG_AP_SUPPORT
#ifdef P2P_SUPPORT
		if (P2P_GO_ON(pAd))
#else
		IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
#endif /* P2P_SUPPORT */
		{
			UAPSD_UnTagFrame(pAd, BulkOutPipeId, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition);
		}
#endif /* CONFIG_AP_SUPPORT */
#endif /* DOT11Z_TDLS_SUPPORT */
#endif /* UAPSD_SUPPORT */

	}

示例#2

0

显示文件

文件： rt_usb.c 项目： BenMueller/netgear-a6210-driver-dkms

static void rtusb_dataout_complete(unsigned long data)
{
	PRTMP_ADAPTER pAd;
	purbb_t pUrb;
	POS_COOKIE pObj;
	PHT_TX_CONTEXT pHTTXContext;
	UCHAR BulkOutPipeId;
	NTSTATUS Status;
	unsigned long IrqFlags;

	pUrb = (purbb_t)data;
	pHTTXContext = (PHT_TX_CONTEXT)RTMP_USB_URB_DATA_GET(pUrb);
	Status = RTMP_USB_URB_STATUS_GET(pUrb);
	pAd = pHTTXContext->pAd;
	pObj = (POS_COOKIE) pAd->OS_Cookie;

	/* Store BulkOut PipeId */
	BulkOutPipeId = pHTTXContext->BulkOutPipeId;
	pAd->BulkOutDataOneSecCount++;

	RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
	pHTTXContext->IRPPending = FALSE;
	pAd->watchDogTxPendingCnt[BulkOutPipeId] = 0;

	if (Status == USB_ST_NOERROR) {
		pAd->BulkOutComplete++;

		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);

		pAd->Counters8023.GoodTransmits++;
		/*RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */
		FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext);
		/*RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */

#ifdef UAPSD_SUPPORT
#ifdef CONFIG_AP_SUPPORT
#ifdef RT_CFG80211_P2P_SUPPORT
		if (RTMP_CFG80211_VIF_P2P_GO_ON(pAd))
#else
		IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
#endif /* RT_CFG80211_P2P_SUPPORT */
		{
			UAPSD_UnTagFrame(pAd, BulkOutPipeId, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition);
		}
#endif /* CONFIG_AP_SUPPORT */
#endif /* UAPSD_SUPPORT */

	} else {

示例#3

0

显示文件

文件： rt_usb.c 项目： vm3vuy/my-local-repository

static void rtusb_dataout_complete(unsigned long data)
{
	PRTMP_ADAPTER		pAd;
	purbb_t				pUrb;
	POS_COOKIE			pObj;
	PHT_TX_CONTEXT		pHTTXContext;
	UCHAR				BulkOutPipeId;
	NTSTATUS			Status;
	unsigned long		IrqFlags;
#ifdef USB_BULK_BUF_ALIGMENT
	unsigned long	IrqFlags2 = 0;
	INT idx = 0;
#endif /* USB_BULK_BUF_ALIGMENT */

#ifdef RELEASE_EXCLUDE
	DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutDataPacketComplete\n"));
#endif /* RELEASE_EXCLUDE */

	pUrb			= (purbb_t)data;
/*	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context; */
	pHTTXContext	= (PHT_TX_CONTEXT)RTMP_USB_URB_DATA_GET(pUrb);
	Status			= RTMP_USB_URB_STATUS_GET(pUrb);
	pAd				= pHTTXContext->pAd;
	pObj 			= (POS_COOKIE) pAd->OS_Cookie;
/*	Status			= pUrb->status; */




	/* Store BulkOut PipeId */
	BulkOutPipeId = pHTTXContext->BulkOutPipeId;
	pAd->BulkOutDataOneSecCount++;

	/*DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition, */
	/*		pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); */

	RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
	pHTTXContext->IRPPending = FALSE;
	pAd->watchDogTxPendingCnt[BulkOutPipeId] = 0;
	
	if (Status == USB_ST_NOERROR)
	{	
		pAd->BulkOutComplete++;

		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
	
		pAd->Counters8023.GoodTransmits++;
		/*RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */
		FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext);			
		/*RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */

#ifdef UAPSD_SUPPORT
#if defined(DOT11Z_TDLS_SUPPORT) || defined(CFG_TDLS_SUPPORT)
#ifdef USB_BULK_BUF_ALIGMENT
		UAPSD_UnTagFrame(pAd, BulkOutPipeId, pHTTXContext->CurtBulkIdx, pHTTXContext->NextBulkIdx);
#else
		UAPSD_UnTagFrame(pAd, BulkOutPipeId, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition);
#endif /* USB_BULK_BUF_ALIGMENT */

#else
#ifdef CONFIG_AP_SUPPORT
#ifdef P2P_SUPPORT
		if (P2P_GO_ON(pAd))
#else
#ifdef RT_CFG80211_P2P_SUPPORT
		if (RTMP_CFG80211_VIF_P2P_GO_ON(pAd))		
#else
		IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
#endif /* RT_CFG80211_P2P_SUPPORT */
#endif /* P2P_SUPPORT */
		{
#ifdef USB_BULK_BUF_ALIGMENT
			UAPSD_UnTagFrame(pAd, BulkOutPipeId, pHTTXContext->CurtBulkIdx, pHTTXContext->NextBulkIdx);
#else
			UAPSD_UnTagFrame(pAd, BulkOutPipeId, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition);
#endif /* USB_BULK_BUF_ALIGMENT */

		}
#endif /* CONFIG_AP_SUPPORT */
#endif /* defined(DOT11Z_TDLS_SUPPORT) || defined(CFG_TDLS_SUPPORT) */
#endif /* UAPSD_SUPPORT */

#ifdef USB_BULK_BUF_ALIGMENT
	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
	CUR_WRITE_IDX_INC(pHTTXContext->CurtBulkIdx, BUF_ALIGMENT_RINGSIZE);	
	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
#endif /* USB_BULK_BUF_ALIGMENT */

	}

示例#4

0

显示文件

文件： 2870_rtmp_init.c 项目： acassis/emlinux-ssd1935

static void rt2870_dataout_complete_tasklet(unsigned long data)
{
	PRTMP_ADAPTER		pAd;
	purbb_t				pUrb;
	POS_COOKIE			pObj;
	PHT_TX_CONTEXT		pHTTXContext;
	UCHAR				BulkOutPipeId;
	NTSTATUS			Status;
	unsigned long		IrqFlags;


	pUrb			= (purbb_t)data;
	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
	pAd				= pHTTXContext->pAd;
	pObj 			= (POS_COOKIE) pAd->OS_Cookie;
	Status			= pUrb->status;

	// Store BulkOut PipeId
	BulkOutPipeId = pHTTXContext->BulkOutPipeId;
	pAd->BulkOutDataOneSecCount++;

	//DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition, 
	//		pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));

	RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
	pHTTXContext->IRPPending = FALSE;
	pAd->watchDogTxPendingCnt[BulkOutPipeId] = 0;
	
	if (Status == USB_ST_NOERROR)
	{	
		pAd->BulkOutComplete++;

		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
	
		pAd->Counters8023.GoodTransmits++;
		//RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
		FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext);			
		//RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);


	}
	else	// STATUS_OTHER
	{
		PUCHAR	pBuf;
		
		pAd->BulkOutCompleteOther++;
		
		pBuf = &pHTTXContext->TransferBuffer->field.WirelessPacket[pHTTXContext->NextBulkOutPosition];
		
		if (!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
									fRTMP_ADAPTER_HALT_IN_PROGRESS |
									fRTMP_ADAPTER_NIC_NOT_EXIST |
									fRTMP_ADAPTER_BULKOUT_RESET)))
		{
			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
			pAd->bulkResetPipeid = BulkOutPipeId;
			pAd->bulkResetReq[BulkOutPipeId] = pAd->BulkOutReq;
		}
		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);

		DBGPRINT_RAW(RT_DEBUG_ERROR, ("BulkOutDataPacket failed: ReasonCode=%d!\n", Status));
		DBGPRINT_RAW(RT_DEBUG_ERROR, ("\t>>BulkOut Req=0x%lx, Complete=0x%lx, Other=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete, pAd->BulkOutCompleteOther));
		DBGPRINT_RAW(RT_DEBUG_ERROR, ("\t>>BulkOut Header:%x %x %x %x %x %x %x %x\n", pBuf[0], pBuf[1], pBuf[2], pBuf[3], pBuf[4], pBuf[5], pBuf[6], pBuf[7]));
		//DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOutCompleteCancel=0x%x, BulkOutCompleteOther=0x%x\n", pAd->BulkOutCompleteCancel, pAd->BulkOutCompleteOther));
		
	}

	//
	// bInUse = TRUE, means some process are filling TX data, after that must turn on bWaitingBulkOut
	// bWaitingBulkOut = TRUE, means the TX data are waiting for bulk out. 
	//
	//RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
	if ((pHTTXContext->ENextBulkOutPosition != pHTTXContext->CurWritePosition) && 
		(pHTTXContext->ENextBulkOutPosition != (pHTTXContext->CurWritePosition+8)) && 
		!RTUSB_TEST_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId)))
	{
		// Indicate There is data avaliable
		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
	}
	//RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);

	// Always call Bulk routine, even reset bulk.
	// The protection of rest bulk should be in BulkOut routine
	RTUSBKickBulkOut(pAd);
}