void CFPF_SkiaFontMgr::ReportFace(FXFT_Face face, CFPF_SkiaFontDescriptor *pFontDesc)
{
if (!face || !pFontDesc) {
return;
}
pFontDesc->SetFamily(FXFT_Get_Face_Family_Name(face));
if (FXFT_Is_Face_Bold(face)) {
pFontDesc->m_dwStyle |= FXFONT_BOLD;
}
if (FXFT_Is_Face_Italic(face)) {
pFontDesc->m_dwStyle |= FXFONT_ITALIC;
}
if (FT_IS_FIXED_WIDTH(face)) {
pFontDesc->m_dwStyle |= FXFONT_FIXED_PITCH;
}
TT_OS2 *pOS2 = (TT_OS2*)FT_Get_Sfnt_Table(face, ft_sfnt_os2);
if (pOS2) {
if (pOS2->ulCodePageRange1 & (1 << 31)) {
pFontDesc->m_dwStyle |= FXFONT_SYMBOLIC;
}
if (pOS2->panose[0] == 2) {
FX_BYTE uSerif = pOS2->panose[1];
if ((uSerif > 1 && uSerif < 10) || uSerif > 13) {
pFontDesc->m_dwStyle |= FXFONT_SERIF;
}
}
}
if (pOS2 && (pOS2->ulCodePageRange1 & (1 << 31))) {
pFontDesc->m_dwStyle |= FXFONT_SYMBOLIC;
}
pFontDesc->m_dwCharsets = FPF_SkiaGetFaceCharset(pOS2);
pFontDesc->m_iFaceIndex = face->face_index;
pFontDesc->m_iGlyphNum = face->num_glyphs;
}
int gli_draw_string_uni(int x, int y, int fidx, unsigned char *rgb,
glui32 *s, int n, int spw)
{
font_t *f = &gfont_table[fidx];
int dolig = ! FT_IS_FIXED_WIDTH(f->face);
int prev = -1;
glui32 c;
int px, sx;
if ( FT_Get_Char_Index(f->face, UNI_LIG_FI) == 0 )
dolig = 0;
if ( FT_Get_Char_Index(f->face, UNI_LIG_FL) == 0 )
dolig = 0;
while (n--)
{
bitmap_t *glyphs;
int adv;
c = *s++;
if (dolig && n && c == 'f' && *s == 'i')
{
c = UNI_LIG_FI;
s++;
n--;
}
if (dolig && n && c == 'f' && *s == 'l')
{
c = UNI_LIG_FL;
s++;
n--;
}
getglyph(f, c, &adv, &glyphs);
if (prev != -1)
x += charkern(f, prev, c);
px = x / GLI_SUBPIX;
sx = x % GLI_SUBPIX;
if (gli_conf_lcd)
draw_bitmap_lcd(&glyphs[sx], px, y, rgb);
else
draw_bitmap(&glyphs[sx], px, y, rgb);
if (spw >= 0 && c == ' ')
x += spw;
else
x += adv;
prev = c;
}
return x;
}
void
Print_Type( FT_Face face )
{
FT_Module module;
printf( "font type entries\n" );
module = &face->driver->root;
printf( " FreeType driver: %s\n", module->clazz->module_name );
/* Is it better to dump all sfnt tag names? */
printf( " sfnt wrapped: %s\n",
FT_IS_SFNT( face ) ? (char *)"yes" : (char *)"no" );
/* isScalable? */
comma_flag = 0;
printf( " type: " );
if ( FT_IS_SCALABLE( face ) )
{
Print_Comma( "scalable" );
if ( FT_HAS_MULTIPLE_MASTERS( face ) )
Print_Comma( "multiple masters" );
}
if ( FT_HAS_FIXED_SIZES( face ) )
Print_Comma( "fixed size" );
printf( "\n" );
/* Direction */
comma_flag = 0;
printf( " direction: " );
if ( FT_HAS_HORIZONTAL( face ) )
Print_Comma( "horizontal" );
if ( FT_HAS_VERTICAL( face ) )
Print_Comma( "vertical" );
printf( "\n" );
printf( " fixed width: %s\n",
FT_IS_FIXED_WIDTH( face ) ? (char *)"yes" : (char *)"no" );
printf( " glyph names: %s\n",
FT_HAS_GLYPH_NAMES( face ) ? (char *)"yes" : (char *)"no" );
if ( FT_IS_SCALABLE( face ) )
{
printf( " EM size: %d\n", face->units_per_EM );
printf( " global BBox: (%ld,%ld):(%ld,%ld)\n",
face->bbox.xMin, face->bbox.yMin,
face->bbox.xMax, face->bbox.yMax );
printf( " ascent: %d\n", face->ascender );
printf( " descent: %d\n", face->descender );
printf( " text height: %d\n", face->height );
}
}
bool Font::isFixedPitch() const
{
if (d->m_ttfFont) {
if (FT_IS_FIXED_WIDTH(d->m_ttfFont->face))
return true;
else
return false;
} else
return true;
}
/*********************************************************
*
* Misc getters
*
*********************************************************/
int
_PGFT_Face_IsFixedWidth(FreeTypeInstance *ft, PgFaceObject *faceobj)
{
FT_Face face = _PGFT_GetFace(ft, faceobj);
if (!face) {
RAISE(PyExc_RuntimeError, _PGFT_GetError(ft));
return -1;
}
return FT_IS_FIXED_WIDTH(face);
}
/*********************************************************
*
* Misc getters
*
*********************************************************/
int
_PGFT_Font_IsFixedWidth(FreeTypeInstance *ft, PgFontObject *fontobj)
{
FT_Face font = _PGFT_GetFont(ft, fontobj);
if (!font) {
RAISE(PyExc_RuntimeError, _PGFT_GetError(ft));
return -1;
}
return FT_IS_FIXED_WIDTH(font);
}
uint32_t CFGAS_FontMgr::GetFlags(FXFT_Face pFace) {
uint32_t flag = 0;
if (FT_IS_FIXED_WIDTH(pFace))
flag |= FX_FONTSTYLE_FixedPitch;
TT_OS2* pOS2 = (TT_OS2*)FT_Get_Sfnt_Table(pFace, ft_sfnt_os2);
if (!pOS2)
return flag;
if (pOS2->ulCodePageRange1 & (1 << 31))
flag |= FX_FONTSTYLE_Symbolic;
if (pOS2->panose[0] == 2) {
uint8_t uSerif = pOS2->panose[1];
if ((uSerif > 1 && uSerif < 10) || uSerif > 13)
flag |= FX_FONTSTYLE_Serif;
}
return flag;
}
int gli_string_width_uni(int fidx, glui32 *s, int n, int spw)
{
font_t *f = &gfont_table[fidx];
int dolig = ! FT_IS_FIXED_WIDTH(f->face);
int prev = -1;
int w = 0;
if ( FT_Get_Char_Index(f->face, UNI_LIG_FI) == 0 )
dolig = 0;
if ( FT_Get_Char_Index(f->face, UNI_LIG_FL) == 0 )
dolig = 0;
while (n--)
{
bitmap_t *glyphs;
int adv;
int c = *s++;
if (dolig && n && c == 'f' && *s == 'i')
{
c = UNI_LIG_FI;
s++;
n--;
}
if (dolig && n && c == 'f' && *s == 'l')
{
c = UNI_LIG_FL;
s++;
n--;
}
getglyph(f, c, &adv, &glyphs);
if (prev != -1)
w += charkern(f, prev, c);
if (spw >= 0 && c == ' ')
w += spw;
else
w += adv;
prev = c;
}
return w;
}
af_loader_load_glyph( AF_Loader loader,
AF_Module module,
FT_Face face,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
FT_Size size = face->size;
FT_Size_Internal size_internal = size->internal;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal slot_internal = slot->internal;
FT_GlyphLoader gloader = slot_internal->loader;
AF_GlyphHints hints = loader->hints;
AF_ScalerRec scaler;
AF_StyleMetrics style_metrics;
FT_UInt style_options = AF_STYLE_NONE_DFLT;
AF_StyleClass style_class;
AF_WritingSystemClass writing_system_class;
if ( !size )
return FT_THROW( Invalid_Size_Handle );
FT_ZERO( &scaler );
if ( !size_internal->autohint_metrics.x_scale ||
size_internal->autohint_mode != FT_LOAD_TARGET_MODE( load_flags ) )
{
/* switching between hinting modes usually means different scaling */
/* values; this later on enforces recomputation of everything */
/* related to the current size */
size_internal->autohint_mode = FT_LOAD_TARGET_MODE( load_flags );
size_internal->autohint_metrics = size->metrics;
#ifdef AF_CONFIG_OPTION_TT_SIZE_METRICS
{
FT_Size_Metrics* size_metrics = &size_internal->autohint_metrics;
/* set metrics to integer values and adjust scaling accordingly; */
/* this is the same setup as with TrueType fonts, cf. function */
/* `tt_size_reset' in file `ttobjs.c' */
size_metrics->ascender = FT_PIX_ROUND(
FT_MulFix( face->ascender,
size_metrics->y_scale ) );
size_metrics->descender = FT_PIX_ROUND(
FT_MulFix( face->descender,
size_metrics->y_scale ) );
size_metrics->height = FT_PIX_ROUND(
FT_MulFix( face->height,
size_metrics->y_scale ) );
size_metrics->x_scale = FT_DivFix( size_metrics->x_ppem << 6,
face->units_per_EM );
size_metrics->y_scale = FT_DivFix( size_metrics->y_ppem << 6,
face->units_per_EM );
size_metrics->max_advance = FT_PIX_ROUND(
FT_MulFix( face->max_advance_width,
size_metrics->x_scale ) );
}
#endif /* AF_CONFIG_OPTION_TT_SIZE_METRICS */
}
/*
* TODO: This code currently doesn't support fractional advance widths,
* i.e., placing hinted glyphs at anything other than integer
* x-positions. This is only relevant for the warper code, which
* scales and shifts glyphs to optimize blackness of stems (hinting on
* the x-axis by nature places things on pixel integers, hinting on the
* y-axis only, i.e., LIGHT mode, doesn't touch the x-axis). The delta
* values of the scaler would need to be adjusted.
*/
scaler.face = face;
scaler.x_scale = size_internal->autohint_metrics.x_scale;
scaler.x_delta = 0;
scaler.y_scale = size_internal->autohint_metrics.y_scale;
scaler.y_delta = 0;
scaler.render_mode = FT_LOAD_TARGET_MODE( load_flags );
scaler.flags = 0;
/* note that the fallback style can't be changed anymore */
/* after the first call of `af_loader_load_glyph' */
error = af_loader_reset( loader, module, face );
if ( error )
goto Exit;
#ifdef FT_OPTION_AUTOFIT2
/* XXX: undocumented hook to activate the latin2 writing system. */
if ( load_flags & ( 1UL << 20 ) )
style_options = AF_STYLE_LTN2_DFLT;
#endif
/*
* Glyphs (really code points) are assigned to scripts. Script
* analysis is done lazily: For each glyph that passes through here,
* the corresponding script analyzer is called, but returns immediately
* if it has been run already.
*/
error = af_face_globals_get_metrics( loader->globals, glyph_index,
style_options, &style_metrics );
if ( error )
goto Exit;
style_class = style_metrics->style_class;
writing_system_class =
af_writing_system_classes[style_class->writing_system];
loader->metrics = style_metrics;
if ( writing_system_class->style_metrics_scale )
writing_system_class->style_metrics_scale( style_metrics, &scaler );
else
style_metrics->scaler = scaler;
if ( writing_system_class->style_hints_init )
{
error = writing_system_class->style_hints_init( hints,
style_metrics );
if ( error )
goto Exit;
}
/*
* Do the main work of `af_loader_load_glyph'. Note that we never have
* to deal with composite glyphs as those get loaded into
* FT_GLYPH_FORMAT_OUTLINE by the recursed `FT_Load_Glyph' function.
* In the rare cases where FT_LOAD_NO_RECURSE is set, it implies
* FT_LOAD_NO_SCALE and as such the auto-hinter is never called.
*/
load_flags |= FT_LOAD_NO_SCALE |
FT_LOAD_IGNORE_TRANSFORM |
FT_LOAD_LINEAR_DESIGN;
load_flags &= ~FT_LOAD_RENDER;
error = FT_Load_Glyph( face, glyph_index, load_flags );
if ( error )
goto Exit;
/*
* Apply stem darkening (emboldening) here before hints are applied to
* the outline. Glyphs are scaled down proportionally to the
* emboldening so that curve points don't fall outside their
* precomputed blue zones.
*
* Any emboldening done by the font driver (e.g., the CFF driver)
* doesn't reach here because the autohinter loads the unprocessed
* glyphs in font units for analysis (functions `af_*_metrics_init_*')
* and then above to prepare it for the rasterizers by itself,
* independently of the font driver. So emboldening must be done here,
* within the autohinter.
*
* All glyphs to be autohinted pass through here one by one. The
* standard widths can therefore change from one glyph to the next,
* depending on what script a glyph is assigned to (each script has its
* own set of standard widths and other metrics). The darkening amount
* must therefore be recomputed for each size and
* `standard_{vertical,horizontal}_width' change.
*
* Ignore errors and carry on without emboldening.
*
*/
/* stem darkening only works well in `light' mode */
if ( scaler.render_mode == FT_RENDER_MODE_LIGHT &&
( !face->internal->no_stem_darkening ||
( face->internal->no_stem_darkening < 0 &&
!module->no_stem_darkening ) ) )
af_loader_embolden_glyph_in_slot( loader, face, style_metrics );
loader->transformed = slot_internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = slot_internal->glyph_matrix;
loader->trans_delta = slot_internal->glyph_delta;
inverse = loader->trans_matrix;
if ( !FT_Matrix_Invert( &inverse ) )
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform is needed */
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* compute original horizontal phantom points */
/* (and ignore vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline */
/* and run the automatic hinting process */
if ( writing_system_class->style_hints_apply )
{
error = writing_system_class->style_hints_apply(
glyph_index,
hints,
&gloader->base.outline,
style_metrics );
if ( error )
goto Exit;
}
/* we now need to adjust the metrics according to the change in */
/* width/positioning that occurred during the hinting process */
if ( scaler.render_mode != FT_RENDER_MODE_LIGHT )
{
AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ];
if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) )
{
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
FT_Pos old_rsb = loader->pp2.x - edge2->opos;
/* loader->pp1.x is always zero at this point of time */
FT_Pos old_lsb = edge1->opos; /* - loader->pp1.x */
FT_Pos new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
FT_Pos pp1x_uh = new_lsb - old_lsb;
FT_Pos pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 8;
if ( old_rsb < 24 )
pp2x_uh += 8;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
if ( loader->pp1.x >= new_lsb && old_lsb > 0 )
loader->pp1.x -= 64;
if ( loader->pp2.x <= edge2->pos && old_rsb > 0 )
loader->pp2.x += 64;
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta );
loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
}
/* `light' mode uses integer advance widths */
/* but sets `lsb_delta' and `rsb_delta' */
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x );
loader->pp2.x = FT_PIX_ROUND( pp2x );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
break;
default:
/* we don't support other formats (yet?) */
error = FT_THROW( Unimplemented_Feature );
}
Hint_Metrics:
{
FT_BBox bbox;
FT_Vector vvector;
vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX;
vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY;
vvector.x = FT_MulFix( vvector.x, style_metrics->scaler.x_scale );
vvector.y = FT_MulFix( vvector.y, style_metrics->scaler.y_scale );
/* transform the hinted outline if needed */
if ( loader->transformed )
{
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
FT_Vector_Transform( &vvector, &loader->trans_matrix );
}
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x );
slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y );
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width; ditto for */
/* digits if all have the same advance width */
if ( scaler.render_mode != FT_RENDER_MODE_LIGHT &&
( FT_IS_FIXED_WIDTH( slot->face ) ||
( af_face_globals_is_digit( loader->globals, glyph_index ) &&
style_metrics->digits_have_same_width ) ) )
{
slot->metrics.horiAdvance =
FT_MulFix( slot->metrics.horiAdvance,
style_metrics->scaler.x_scale );
/* Set delta values to 0. Otherwise code that uses them is */
/* going to ruin the fixed advance width. */
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
else
{
/* non-spacing glyphs must stay as-is */
if ( slot->metrics.horiAdvance )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
}
slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance,
style_metrics->scaler.y_scale );
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance );
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
Exit:
return error;
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags,
FT_UInt depth )
{
FT_Error error;
FT_Face face = loader->face;
FT_GlyphLoader gloader = loader->gloader;
AF_ScriptMetrics metrics = loader->metrics;
AF_GlyphHints hints = &loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
FT_Int32 flags;
flags = load_flags | FT_LOAD_LINEAR_DESIGN;
error = FT_Load_Glyph( face, glyph_index, flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
FT_Matrix_Invert( &inverse );
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform is needed */
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* copy the outline points in the loader's current */
/* extra points which are used to keep original glyph coordinates */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader,
slot->outline.n_points + 4,
slot->outline.n_contours );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.outline.points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.outline.contours,
slot->outline.contours,
slot->outline.n_contours );
FT_ARRAY_COPY( gloader->current.outline.tags,
slot->outline.tags,
slot->outline.n_points );
gloader->current.outline.n_points = slot->outline.n_points;
gloader->current.outline.n_contours = slot->outline.n_contours;
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
if ( metrics->clazz->script_hints_apply )
metrics->clazz->script_hints_apply( hints,
&gloader->current.outline,
metrics );
/* we now need to adjust the metrics according to the change in */
/* width/positioning that occurred during the hinting process */
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT )
{
FT_Pos old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) )
{
old_rsb = loader->pp2.x - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 8;
if ( old_rsb < 24 )
pp2x_uh += 8;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
if ( loader->pp1.x >= new_lsb && old_lsb > 0 )
loader->pp1.x -= 64;
if ( loader->pp2.x <= edge2->pos && old_rsb > 0 )
loader->pp2.x += 64;
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x );
loader->pp2.x = FT_PIX_ROUND( pp2x );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta );
loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
/* good, we simply add the glyph to our loader's base */
FT_GlyphLoader_Add( gloader );
break;
case FT_GLYPH_FORMAT_COMPOSITE:
{
FT_UInt nn, num_subglyphs = slot->num_subglyphs;
FT_UInt num_base_subgs, start_point;
FT_SubGlyph subglyph;
start_point = gloader->base.outline.n_points;
/* first of all, copy the subglyph descriptors in the glyph loader */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.subglyphs,
slot->subglyphs,
num_subglyphs );
gloader->current.num_subglyphs = num_subglyphs;
num_base_subgs = gloader->base.num_subglyphs;
/* now read each subglyph independently */
for ( nn = 0; nn < num_subglyphs; nn++ )
{
FT_Vector pp1, pp2;
FT_Pos x, y;
FT_UInt num_points, num_new_points, num_base_points;
/* gloader.current.subglyphs can change during glyph loading due */
/* to re-allocation -- we must recompute the current subglyph on */
/* each iteration */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
pp1 = loader->pp1;
pp2 = loader->pp2;
num_base_points = gloader->base.outline.n_points;
error = af_loader_load_g( loader, scaler, subglyph->index,
load_flags, depth + 1 );
if ( error )
goto Exit;
/* recompute subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS )
{
pp1 = loader->pp1;
pp2 = loader->pp2;
}
else
{
loader->pp1 = pp1;
loader->pp2 = pp2;
}
num_points = gloader->base.outline.n_points;
num_new_points = num_points - num_base_points;
/* now perform the transformation required for this subglyph */
if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE |
FT_SUBGLYPH_FLAG_XY_SCALE |
FT_SUBGLYPH_FLAG_2X2 ) )
{
FT_Vector* cur = gloader->base.outline.points +
num_base_points;
FT_Vector* limit = cur + num_new_points;
for ( ; cur < limit; cur++ )
FT_Vector_Transform( cur, &subglyph->transform );
}
/* apply offset */
if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) )
{
FT_Int k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
if ( start_point + k >= num_base_points ||
l >= (FT_UInt)num_new_points )
{
error = AF_Err_Invalid_Composite;
goto Exit;
}
l += num_base_points;
/* for now, only use the current point coordinates; */
/* we eventually may consider another approach */
p1 = gloader->base.outline.points + start_point + k;
p2 = gloader->base.outline.points + start_point + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta;
y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta;
x = FT_PIX_ROUND( x );
y = FT_PIX_ROUND( y );
}
{
FT_Outline dummy = gloader->base.outline;
dummy.points += num_base_points;
dummy.n_points = (short)num_new_points;
FT_Outline_Translate( &dummy, x, y );
}
}
}
break;
default:
/* we don't support other formats (yet?) */
error = AF_Err_Unimplemented_Feature;
}
Hint_Metrics:
if ( depth == 0 )
{
FT_BBox bbox;
FT_Vector vvector;
vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX;
vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY;
vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale );
vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale );
/* transform the hinted outline if needed */
if ( loader->transformed )
{
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
FT_Vector_Transform( &vvector, &loader->trans_matrix );
}
#if 1
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
#endif
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x );
slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y );
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width; ditto for */
/* digits if all have the same advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT &&
( FT_IS_FIXED_WIDTH( slot->face ) ||
( af_face_globals_is_digit( loader->globals, glyph_index ) &&
metrics->digits_have_same_width ) ) )
{
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
/* Set delta values to 0. Otherwise code that uses them is */
/* going to ruin the fixed advance width. */
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
else
{
/* non-spacing glyphs must stay as-is */
if ( slot->metrics.horiAdvance )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
}
#endif
slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance,
metrics->scaler.y_scale );
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance );
/* now copy outline into glyph slot */
FT_GlyphLoader_Rewind( internal->loader );
error = FT_GlyphLoader_CopyPoints( internal->loader, gloader );
if ( error )
goto Exit;
/* reassign all outline fields except flags to protect them */
slot->outline.n_contours = internal->loader->base.outline.n_contours;
slot->outline.n_points = internal->loader->base.outline.n_points;
slot->outline.points = internal->loader->base.outline.points;
slot->outline.tags = internal->loader->base.outline.tags;
slot->outline.contours = internal->loader->base.outline.contours;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
Exit:
return error;
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
AF_Module module = loader->globals->module;
FT_Error error;
FT_Face face = loader->face;
AF_StyleMetrics metrics = loader->metrics;
AF_GlyphHints hints = loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
FT_GlyphLoader gloader = internal->loader;
FT_Int32 flags;
flags = load_flags | FT_LOAD_LINEAR_DESIGN;
error = FT_Load_Glyph( face, glyph_index, flags );
if ( error )
goto Exit;
/*
* Apply stem darkening (emboldening) here before hints are applied to
* the outline. Glyphs are scaled down proportionally to the
* emboldening so that curve points don't fall outside their precomputed
* blue zones.
*
* Any emboldening done by the font driver (e.g., the CFF driver)
* doesn't reach here because the autohinter loads the unprocessed
* glyphs in font units for analysis (functions `af_*_metrics_init_*')
* and then above to prepare it for the rasterizers by itself,
* independently of the font driver. So emboldening must be done here,
* within the autohinter.
*
* All glyphs to be autohinted pass through here one by one. The
* standard widths can therefore change from one glyph to the next,
* depending on what script a glyph is assigned to (each script has its
* own set of standard widths and other metrics). The darkening amount
* must therefore be recomputed for each size and
* `standard_{vertical,horizontal}_width' change.
*/
if ( !module->no_stem_darkening )
{
AF_FaceGlobals globals = loader->globals;
AF_WritingSystemClass writing_system_class;
FT_Pos stdVW = 0;
FT_Pos stdHW = 0;
FT_Bool size_changed = face->size->metrics.x_ppem
!= globals->stem_darkening_for_ppem;
FT_Fixed em_size = af_intToFixed( face->units_per_EM );
FT_Fixed em_ratio = FT_DivFix( af_intToFixed( 1000 ), em_size );
FT_Matrix scale_down_matrix = { 0x10000L, 0, 0, 0x10000L };
/* Skip stem darkening for broken fonts. */
if ( !face->units_per_EM )
goto After_Emboldening;
/*
* We depend on the writing system (script analyzers) to supply
* standard widths for the script of the glyph we are looking at. If
* it can't deliver, stem darkening is effectively disabled.
*/
writing_system_class =
AF_WRITING_SYSTEM_CLASSES_GET[metrics->style_class->writing_system];
if ( writing_system_class->style_metrics_getstdw )
writing_system_class->style_metrics_getstdw( metrics,
&stdHW,
&stdVW );
else
goto After_Emboldening;
if ( size_changed ||
( stdVW > 0 && stdVW != globals->standard_vertical_width ) )
{
FT_Fixed darken_by_font_units_x, darken_x;
darken_by_font_units_x =
af_intToFixed( af_loader_compute_darkening( loader,
face,
stdVW ) );
darken_x = FT_DivFix( FT_MulFix( darken_by_font_units_x,
face->size->metrics.x_scale ),
em_ratio );
globals->standard_vertical_width = stdVW;
globals->stem_darkening_for_ppem = face->size->metrics.x_ppem;
globals->darken_x = af_fixedToInt( darken_x );
}
if ( size_changed ||
( stdHW > 0 && stdHW != globals->standard_horizontal_width ) )
{
FT_Fixed darken_by_font_units_y, darken_y;
darken_by_font_units_y =
af_intToFixed( af_loader_compute_darkening( loader,
face,
stdHW ) );
darken_y = FT_DivFix( FT_MulFix( darken_by_font_units_y,
face->size->metrics.y_scale ),
em_ratio );
globals->standard_horizontal_width = stdHW;
globals->stem_darkening_for_ppem = face->size->metrics.x_ppem;
globals->darken_y = af_fixedToInt( darken_y );
/*
* Scale outlines down on the Y-axis to keep them inside their blue
* zones. The stronger the emboldening, the stronger the
* downscaling (plus heuristical padding to prevent outlines still
* falling out their zones due to rounding).
*
* Reason: `FT_Outline_Embolden' works by shifting the rightmost
* points of stems farther to the right, and topmost points farther
* up. This positions points on the Y-axis outside their
* pre-computed blue zones and leads to distortion when applying the
* hints in the code further below. Code outside this emboldening
* block doesn't know we are presenting it with modified outlines
* the analyzer didn't see!
*
* An unfortunate side effect of downscaling is that the emboldening
* effect is slightly decreased. The loss becomes more pronounced
* versus the CFF driver at smaller sizes, e.g., at 9ppem and below.
*/
globals->scale_down_factor =
FT_DivFix( em_size - ( darken_by_font_units_y + af_intToFixed( 8 ) ),
em_size );
}
FT_Outline_EmboldenXY( &slot->outline,
globals->darken_x,
globals->darken_y );
scale_down_matrix.yy = globals->scale_down_factor;
FT_Outline_Transform( &slot->outline, &scale_down_matrix );
}
After_Emboldening:
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
if ( !FT_Matrix_Invert( &inverse ) )
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform is needed */
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
{
#ifdef FT_CONFIG_OPTION_PIC
AF_FaceGlobals globals = loader->globals;
#endif
AF_StyleClass style_class = metrics->style_class;
AF_WritingSystemClass writing_system_class =
AF_WRITING_SYSTEM_CLASSES_GET[style_class->writing_system];
if ( writing_system_class->style_hints_apply )
writing_system_class->style_hints_apply( glyph_index,
hints,
&gloader->base.outline,
metrics );
}
/* we now need to adjust the metrics according to the change in */
/* width/positioning that occurred during the hinting process */
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT )
{
FT_Pos old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) )
{
old_rsb = loader->pp2.x - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 8;
if ( old_rsb < 24 )
pp2x_uh += 8;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
if ( loader->pp1.x >= new_lsb && old_lsb > 0 )
loader->pp1.x -= 64;
if ( loader->pp2.x <= edge2->pos && old_rsb > 0 )
loader->pp2.x += 64;
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x );
loader->pp2.x = FT_PIX_ROUND( pp2x );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta );
loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
break;
default:
/* we don't support other formats (yet?) */
error = FT_THROW( Unimplemented_Feature );
}
Hint_Metrics:
{
FT_BBox bbox;
FT_Vector vvector;
vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX;
vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY;
vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale );
vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale );
/* transform the hinted outline if needed */
if ( loader->transformed )
{
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
FT_Vector_Transform( &vvector, &loader->trans_matrix );
}
#if 1
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
#endif
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x );
slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y );
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width; ditto for */
/* digits if all have the same advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT &&
( FT_IS_FIXED_WIDTH( slot->face ) ||
( af_face_globals_is_digit( loader->globals, glyph_index ) &&
metrics->digits_have_same_width ) ) )
{
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
/* Set delta values to 0. Otherwise code that uses them is */
/* going to ruin the fixed advance width. */
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
else
{
/* non-spacing glyphs must stay as-is */
if ( slot->metrics.horiAdvance )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
}
#endif
slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance,
metrics->scaler.y_scale );
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance );
#if 0
/* reassign all outline fields except flags to protect them */
slot->outline.n_contours = internal->loader->base.outline.n_contours;
slot->outline.n_points = internal->loader->base.outline.n_points;
slot->outline.points = internal->loader->base.outline.points;
slot->outline.tags = internal->loader->base.outline.tags;
slot->outline.contours = internal->loader->base.outline.contours;
#endif
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
Exit:
return error;
}
//
// Constructor:
//
FontFace::FontFace( FontLibrary &library, const std::string &fileName ){
_fileName=fileName;
//
// By default report on fragmentary and partial orthographic
// support in addition to fully supported orthographies:
//
_reportMissing = true;
_reportFragmentary = true;
_reportPartial = true;
_reportFull = true;
_reportConscript = false;
FT_Error err;
err = FT_New_Face(library.get(),_fileName.c_str(),0, &_face );
if(err==FT_Err_Unknown_File_Format) throw Exception("FontFace()","Unknown file format.");
else if(err) throw Exception("FontFace()","Unable to open or process font file.");
//
//
//
_commonName = _face->family_name;
_subFamily = _face->style_name;
_glyphCount = _face->num_glyphs;
if(FT_IS_SFNT(_face)){
FT_UInt count=FT_Get_Sfnt_Name_Count(_face);
FT_SfntName fontName;
for(unsigned j=0;j<count;j++){
FT_Get_Sfnt_Name(_face,j,&fontName);
if(fontName.platform_id==3 && fontName.encoding_id==1){
//
// Microsoft 3:1 Platform:
//
if( fontName.language_id==0x0409 ){
//
// This is the de-facto
// default AMERICAN ENGLISH
// entry:
//
switch(fontName.name_id){
case NID_FONT_FAMILY:
if(_commonName.empty()) _commonName = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
case NID_FONT_SUBFAM:
if(_subFamily.empty()) _subFamily = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
case NID_VERSION:
if(_version.empty()) _version = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
case NID_VENDOR:
if(_vendor.empty()) _vendor = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
case NID_DESIGNER:
if(_designer.empty()) _designer = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
case NID_URL_VENDOR:
if(_vendorURL.empty()) _vendorURL = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
case NID_URL_DESIGNER:
if(_designerURL.empty()) _designerURL = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
default:
break;
}
}else{
//
// Some other language:
// We take whatever the very first
// other language is to be
// our "nativeName" string:
//
switch(fontName.name_id){
case NID_FONT_FAMILY:
if(_nativeName.empty()) _nativeName = _getPlatform3Encoding1String(fontName.string_len,fontName.string);
break;
default:
break;
}
}
//
// DEBUG
//
//if(fontName.name_id==NID_COPYRIGHT){
// // DEBUG:
// std::cout << ">>> COPYRIGHT: " << _getPlatform3Encoding1String(fontName.string_len,fontName.string) << std::endl;
//}
//if(fontName.name_id==NID_VERSION){
// // DEBUG:
// std::cout << ">>> VERSION : " << _getPlatform3Encoding1String(fontName.string_len,fontName.string) << std::endl;
//}
}else if(fontName.platform_id==1 && fontName.encoding_id==0){
//
// Macintosh 1:0 platform: This is going to
// be English in the MacRoman encoding:
//
// NOTA BENE: We currently do not deal with
// non-English Mac strings. They seem to be
// very rare in real fonts out there in the world.
//
switch(fontName.name_id){
case NID_FONT_FAMILY:
if(_commonName.empty()) _commonName = _getPlatform1Encoding0String(fontName.string_len,fontName.string);
break;
case NID_FONT_SUBFAM:
if(_subFamily.empty()) _subFamily = _getPlatform1Encoding0String(fontName.string_len,fontName.string);
break;
case NID_VERSION:
if(_version.empty()) _version = _getPlatform1Encoding0String(fontName.string_len,fontName.string);
break;
case NID_VENDOR:
if(_vendor.empty()) _vendor = _getPlatform1Encoding0String(fontName.string_len,fontName.string);
break;
case NID_DESIGNER:
if(_designer.empty()) _designer = _getPlatform1Encoding0String(fontName.string_len,fontName.string);
break;
case NID_URL_VENDOR:
if(_vendorURL.empty()) _vendorURL = _getPlatform1Encoding0String(fontName.string_len,fontName.string);
break;
case NID_URL_DESIGNER:
if(_designerURL.empty()) _designerURL = _getPlatform1Encoding0String(fontName.string_len,fontName.string);
break;
default:
break;
}
}
}
}
//
// If native name is missing, fill it in:
//
//if(_nativeName.empty()) _nativeName = _commonName;
_style=NORMAL;
if( _face->style_flags & FT_STYLE_FLAG_ITALIC ) _style = ITALIC;
_weight=NORMAL_WEIGHT;
if( _face->style_flags & FT_STYLE_FLAG_BOLD ) _weight = BOLD;
_isFixedWidth=FT_IS_FIXED_WIDTH(_face);
//
// Vertical metrics for Japanese, Chinese, Mongolian:
//
_hasVerticalMetrics = FT_HAS_VERTICAL(_face);
//
// Check for embedded bitmaps:
//
_hasFixedSizes = FT_HAS_FIXED_SIZES(_face);
//
// Get the set of unicode values this font covers
//
_getUnicodeValues();
//
// Check orthographic coverage:
//
//_checkOrthographies();
//
// Check license:
//
_checkLicenses();
}
/*
* Get the font metrics
*/
static void
fnmetrics(
struct font_metrics *fm
)
{
char *str;
static char *fieldstocheck[3];
#ifdef ENABLE_SFNT
FT_SfntName sn;
#endif /* ENABLE_SFNT */
int i;
fm->italic_angle = 0.0; /* FreeType hides the angle */
fm->underline_position = face->underline_position;
fm->underline_thickness = face->underline_thickness;
fm->is_fixed_pitch = FT_IS_FIXED_WIDTH(face);
fm->ascender = face->ascender;
fm->descender = face->descender;
fm->units_per_em = face->units_per_EM;
fm->bbox[0] = face->bbox.xMin;
fm->bbox[1] = face->bbox.yMin;
fm->bbox[2] = face->bbox.xMax;
fm->bbox[3] = face->bbox.yMax;
#ifdef ENABLE_SFNT
if( FT_Get_Sfnt_Name(face, TT_NAME_ID_COPYRIGHT, &sn) )
#endif /* ENABLE_SFNT */
fm->name_copyright = "";
#ifdef ENABLE_SFNT
else
fm->name_copyright = dupcnstring(sn.string, sn.string_len);
#endif /* ENABLE_SFNT */
fm->name_family = face->family_name;
fm->name_style = face->style_name;
if(fm->name_style == NULL)
fm->name_style = "";
#ifdef ENABLE_SFNT
if( FT_Get_Sfnt_Name(face, TT_NAME_ID_FULL_NAME, &sn) )
#endif /* ENABLE_SFNT */
{
int len;
len = strlen(fm->name_family) + strlen(fm->name_style) + 2;
if(( fm->name_full = malloc(len) )==NULL) {
fprintf (stderr, "****malloc failed %s line %d\n", __FILE__, __LINE__);
exit(255);
}
strcpy(fm->name_full, fm->name_family);
if(strlen(fm->name_style) != 0) {
strcat(fm->name_full, " ");
strcat(fm->name_full, fm->name_style);
}
}
#ifdef ENABLE_SFNT
else
fm->name_full = dupcnstring(sn.string, sn.string_len);
#endif /* ENABLE_SFNT */
#ifdef ENABLE_SFNT
if( FT_Get_Sfnt_Name(face, TT_NAME_ID_VERSION_STRING, &sn) )
#endif /* ENABLE_SFNT */
fm->name_version = "1.0";
#ifdef ENABLE_SFNT
else
fm->name_version = dupcnstring(sn.string, sn.string_len);
#endif /* ENABLE_SFNT */
#ifdef XP_PSTEXT
{
extern const char *xp_psfontname;
fm->name_ps = strdup(xp_psfontname);
/* Handle the rare case if a family name was not provided by the TTF
* font (like Solaris TTF fonts in /usr/openwin/lib/locale/ko.UTF-8/X11/fonts/TrueType,
* /usr/openwin/lib/locale/ko/X11/fonts/TrueType) - in this case we
* have to generate a family name somehow... */
if(fm->name_family == NULL)
fm->name_family = fm->name_ps;
}
#else
#ifdef ENABLE_SFNT
if( FT_Get_Sfnt_Name(face, TT_NAME_ID_PS_NAME , &sn) ) {
#endif /* ENABLE_SFNT */
if(( fm->name_ps = strdup(fm->name_full) )==NULL) {
fprintf (stderr, "****malloc failed %s line %d\n", __FILE__, __LINE__);
exit(255);
}
#ifdef ENABLE_SFNT
} else
fm->name_ps = dupcnstring(sn.string, sn.string_len);
#endif /* ENABLE_SFNT */
#endif /* XP_PSTEXT */
for(i=0; fm->name_ps[i]!=0; i++)
if(fm->name_ps[i] == ' ')
fm->name_ps[i] = '_'; /* no spaces in the Postscript name *m
/* guess the boldness from the font names */
fm->force_bold=0;
fieldstocheck[0] = fm->name_style;
fieldstocheck[1] = fm->name_full;
fieldstocheck[2] = fm->name_ps;
for(i=0; !fm->force_bold && i<sizeof fieldstocheck /sizeof(fieldstocheck[0]); i++) {
str=fieldstocheck[i];
for(i=0; str[i]!=0; i++) {
if( (str[i]=='B'
|| str[i]=='b'
&& ( i==0 || !isalpha(str[i-1]) )
)
&& !strncmp("old",&str[i+1],3)
&& !islower(str[i+4])
) {
fm->force_bold=1;
break;
}
}
}
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
FT_Face face = loader->face;
AF_StyleMetrics metrics = loader->metrics;
AF_GlyphHints hints = loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
FT_GlyphLoader gloader = internal->loader;
FT_Int32 flags;
flags = load_flags | FT_LOAD_LINEAR_DESIGN;
error = FT_Load_Glyph( face, glyph_index, flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
if ( !FT_Matrix_Invert( &inverse ) )
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform is needed */
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
{
#ifdef FT_CONFIG_OPTION_PIC
AF_FaceGlobals globals = loader->globals;
#endif
AF_StyleClass style_class = metrics->style_class;
AF_WritingSystemClass writing_system_class =
AF_WRITING_SYSTEM_CLASSES_GET[style_class->writing_system];
if ( writing_system_class->style_hints_apply )
writing_system_class->style_hints_apply( hints,
&gloader->base.outline,
metrics );
}
/* we now need to adjust the metrics according to the change in */
/* width/positioning that occurred during the hinting process */
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT )
{
FT_Pos old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) )
{
old_rsb = loader->pp2.x - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 8;
if ( old_rsb < 24 )
pp2x_uh += 8;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
if ( loader->pp1.x >= new_lsb && old_lsb > 0 )
loader->pp1.x -= 64;
if ( loader->pp2.x <= edge2->pos && old_rsb > 0 )
loader->pp2.x += 64;
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x );
loader->pp2.x = FT_PIX_ROUND( pp2x );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta );
loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
break;
default:
/* we don't support other formats (yet?) */
error = FT_THROW( Unimplemented_Feature );
}
Hint_Metrics:
{
FT_BBox bbox;
FT_Vector vvector;
vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX;
vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY;
vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale );
vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale );
/* transform the hinted outline if needed */
if ( loader->transformed )
{
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
FT_Vector_Transform( &vvector, &loader->trans_matrix );
}
#if 1
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
#endif
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x );
slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y );
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width; ditto for */
/* digits if all have the same advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT &&
( FT_IS_FIXED_WIDTH( slot->face ) ||
( af_face_globals_is_digit( loader->globals, glyph_index ) &&
metrics->digits_have_same_width ) ) )
{
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
/* Set delta values to 0. Otherwise code that uses them is */
/* going to ruin the fixed advance width. */
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
else
{
/* non-spacing glyphs must stay as-is */
if ( slot->metrics.horiAdvance )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
}
#endif
slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance,
metrics->scaler.y_scale );
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance );
#if 0
/* reassign all outline fields except flags to protect them */
slot->outline.n_contours = internal->loader->base.outline.n_contours;
slot->outline.n_points = internal->loader->base.outline.n_points;
slot->outline.points = internal->loader->base.outline.points;
slot->outline.tags = internal->loader->base.outline.tags;
slot->outline.contours = internal->loader->base.outline.contours;
#endif
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
Exit:
return error;
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags,
FT_UInt depth )
{
FT_Error error = 0;
FT_Face face = loader->face;
FT_GlyphLoader gloader = loader->gloader;
AF_ScriptMetrics metrics = loader->metrics;
AF_GlyphHints hints = &loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
error = FT_Load_Glyph( face, glyph_index, load_flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
FT_Matrix_Invert( &inverse );
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
/* set linear metrics */
slot->linearHoriAdvance = slot->metrics.horiAdvance;
slot->linearVertAdvance = slot->metrics.vertAdvance;
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform
* is needed
*/
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* copy the outline points in the loader's current */
/* extra points which is used to keep original glyph coordinates */
error = FT_GlyphLoader_CheckPoints( gloader,
slot->outline.n_points + 4,
slot->outline.n_contours );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.outline.points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.extra_points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.outline.contours,
slot->outline.contours,
slot->outline.n_contours );
FT_ARRAY_COPY( gloader->current.outline.tags,
slot->outline.tags,
slot->outline.n_points );
gloader->current.outline.n_points = slot->outline.n_points;
gloader->current.outline.n_contours = slot->outline.n_contours;
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
metrics->clazz->script_hints_apply( hints,
&gloader->current.outline,
metrics );
/* we now need to hint the metrics according to the change in */
/* width/positioning that occured during the hinting process */
{
FT_Pos old_advance, old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[ AF_DIMENSION_HORZ ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( edge2 > edge1 )
{
old_advance = loader->pp2.x;
old_rsb = old_advance - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 5;
if ( old_rsb < 24 )
pp2x_uh += 5;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
#if 0
/* try to fix certain bad advance computations */
if ( loader->pp2.x + loader->pp1.x == edge2->pos && old_rsb > 4 )
loader->pp2.x += 64;
#endif
}
else
{
loader->pp1.x = FT_PIX_ROUND( loader->pp1.x );
loader->pp2.x = FT_PIX_ROUND( loader->pp2.x );
}
}
/* good, we simply add the glyph to our loader's base */
FT_GlyphLoader_Add( gloader );
break;
case FT_GLYPH_FORMAT_COMPOSITE:
{
FT_UInt nn, num_subglyphs = slot->num_subglyphs;
FT_UInt num_base_subgs, start_point;
FT_SubGlyph subglyph;
start_point = gloader->base.outline.n_points;
/* first of all, copy the subglyph descriptors in the glyph loader */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.subglyphs,
slot->subglyphs,
num_subglyphs );
gloader->current.num_subglyphs = num_subglyphs;
num_base_subgs = gloader->base.num_subglyphs;
/* now, read each subglyph independently */
for ( nn = 0; nn < num_subglyphs; nn++ )
{
FT_Vector pp1, pp2;
FT_Pos x, y;
FT_UInt num_points, num_new_points, num_base_points;
/* gloader.current.subglyphs can change during glyph loading due */
/* to re-allocation -- we must recompute the current subglyph on */
/* each iteration */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
pp1 = loader->pp1;
pp2 = loader->pp2;
num_base_points = gloader->base.outline.n_points;
error = af_loader_load_g( loader, scaler, subglyph->index,
load_flags, depth + 1 );
if ( error )
goto Exit;
/* recompute subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS )
{
pp1 = loader->pp1;
pp2 = loader->pp2;
}
else
{
loader->pp1 = pp1;
loader->pp2 = pp2;
}
num_points = gloader->base.outline.n_points;
num_new_points = num_points - num_base_points;
/* now perform the transform required for this subglyph */
if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE |
FT_SUBGLYPH_FLAG_XY_SCALE |
FT_SUBGLYPH_FLAG_2X2 ) )
{
FT_Vector* cur = gloader->base.outline.points +
num_base_points;
FT_Vector* org = gloader->base.extra_points +
num_base_points;
FT_Vector* limit = cur + num_new_points;
for ( ; cur < limit; cur++, org++ )
{
FT_Vector_Transform( cur, &subglyph->transform );
FT_Vector_Transform( org, &subglyph->transform );
}
}
/* apply offset */
if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) )
{
FT_Int k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
if ( start_point + k >= num_base_points ||
l >= (FT_UInt)num_new_points )
{
error = FT_Err_Invalid_Composite;
goto Exit;
}
l += num_base_points;
/* for now, only use the current point coordinates; */
/* we may consider another approach in the near future */
p1 = gloader->base.outline.points + start_point + k;
p2 = gloader->base.outline.points + start_point + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta;
y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta;
x = FT_PIX_ROUND(x);
y = FT_PIX_ROUND(y);
}
{
FT_Outline dummy = gloader->base.outline;
dummy.points += num_base_points;
dummy.n_points = (short)num_new_points;
FT_Outline_Translate( &dummy, x, y );
}
}
}
break;
default:
/* we don't support other formats (yet?) */
error = FT_Err_Unimplemented_Feature;
}
Hint_Metrics:
if ( depth == 0 )
{
FT_BBox bbox;
/* transform the hinted outline if needed */
if ( loader->transformed )
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width */
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
#endif
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
/* now copy outline into glyph slot */
FT_GlyphLoader_Rewind( internal->loader );
error = FT_GlyphLoader_CopyPoints( internal->loader, gloader );
if ( error )
goto Exit;
slot->outline = internal->loader->base.outline;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
#ifdef DEBUG_HINTER
af_debug_hinter = hinter;
#endif
Exit:
return error;
}
