int RKC_CommData ( int _ACT, int _ID, double *_Val)
{
int rLop = 0;
int RTNval = 0;
int BuffLEN = 0;
char Buff[128]={0};
char BBC = 0x00;
char dTRN[64] = {0};
static int Rs232Err = 0, NullPort = 0;
switch (_ACT)
{
case Config:
CloseCom(rkc.COM);
if (Rs232Err = ReturnRS232Err (), Rs232Err < 0)
return Rs232Err;
OpenComConfig(rkc.COM, "", rkc.Baud, rkc.Pari, rkc.Dbit, rkc.Sbit, 512, 512);
if (Rs232Err = ReturnRS232Err (), Rs232Err < 0)
{
NullPort = 1;
return Rs232Err;
}
SetCTSMode(rkc.COM, rkc.Flc);
if (Rs232Err = ReturnRS232Err (), Rs232Err < 0)
return Rs232Err;
SetComTime(rkc.COM, rkc.Tout);
if (Rs232Err = ReturnRS232Err (), Rs232Err < 0)
return Rs232Err;
NullPort = 0;
break;
case getTP:
Fmt(Buff, "%c%i[w2p0]%s[w2]%c", _EOT, (_ID & 0xFF), "M1", _ENQ);
// MessagePopup("getTP",Buff); //DJ_Added_0502KB_12_57
break;
case getSP:
Fmt(Buff, "%c%i[w2p0]%s[w2]%c", _EOT, (_ID & 0xFF), "S1", _ENQ);
break;
case getAL1:
Fmt(Buff, "%c%i[w2p0]%s[w2]%c", _EOT, (_ID & 0xFF), "A1", _ENQ);
break;
case getAL2:
Fmt(Buff, "%c%i[w2p0]%s[w2]%c", _EOT, (_ID & 0xFF), "A2", _ENQ);
break;
case getAT:
Fmt(Buff, "%c%i[w2p0]%s[w2]%c", _EOT, (_ID & 0xFF), "G1", _ENQ);
break;
case getST:
Fmt(Buff, "%c%i[w2p0]%s[w2]%c", _EOT, (_ID & 0xFF), "G2", _ENQ);
break;
case setRUN:
Fmt(Buff, "%c%i[w2p0]%c%s[w2]%f[p1]%c", _EOT, (_ID & 0xFF), _STX, "SR", *_Val, _ETX);
break;
case setSP:
Fmt(Buff, "%c%i[w2p0]%c%s[w2]%f[p1]%c", _EOT, (_ID & 0xFF), _STX, "S1", *_Val, _ETX);
break;
case setAL1:
Fmt(Buff, "%c%i[w2p0]%c%s[w2]%f[p1]%c", _EOT, (_ID & 0xFF), _STX, "A1", *_Val, _ETX);
break;
case setAL2:
Fmt(Buff, "%c%i[w2p0]%c%s[w2]%f[p1]%c", _EOT, (_ID & 0xFF), _STX, "A2", *_Val, _ETX);
break;
case setAT:
Fmt(Buff, "%c%i[w2p0]%c%s[w2]%f[p1]%c", _EOT, (_ID & 0xFF), _STX, "G1", *_Val, _ETX);
break;
case setST:
Fmt(Buff, "%c%i[w2p0]%c%s[w2]%f[p1]%c", _EOT, (_ID & 0xFF), _STX, "G2", *_Val, _ETX);
break;
case setPB:
Fmt(Buff, "%c%i[w2p0]%c%s[w2]%f[p1]%c", _EOT, (_ID & 0xFF), _STX, "PB", *_Val, _ETX);
break;
}
if (NullPort)
{
*_Val = 0.00;
}
// Command Transfer Process
if ((_ACT > 0x1F) && (NullPort == 0))
{
// ========================================================= [ Set RKC Data ]
// Flush Out Queue
FlushOutQ (rkc.COM);
Delay(0.5);
// Count Buffer Length
BuffLEN = StringLength (Buff);
// Calc BBC
BBC = 0x00;
for (rLop=4; rLop < BuffLEN; rLop++) BBC ^= Buff[rLop];
// Append BBC
Fmt ( Buff, "%s[a]<%c", BBC);
BuffLEN +=1;
// Sending Command
ComWrt ( rkc.COM, Buff, BuffLEN);
// Flush In Queue
FlushInQ (rkc.COM);
Delay(0.5);
ComRd (rkc.COM, dTRN, 1);
if (dTRN[0] == 0x06)
RTNval = 0; // Sending OK
else if (dTRN[0] == 0x15)
RTNval = -10; // Sending Lost
else
RTNval = -1; // Connect Lost
}
else if ((_ACT > 0x0F) && (NullPort == 0))
{
// ========================================================= [ Get RKC Data ]
// Flush OUT Queue
FlushOutQ (rkc.COM);
Delay(0.5);
// Send CMD
ComWrt ( rkc.COM, Buff, 6);
// Flush IN Queue
FlushInQ (rkc.COM);
Delay(0.5);
// Receive CMD
dTRN[0] = 0x00;
ComRd (rkc.COM, dTRN, 11);
Rs232Err = ReturnRS232Err();
if (ReturnRS232Err() == 0)
Scan (dTRN ,"%s[i5]>%f", _Val);
Delay(0.5);
Fmt ( Buff, "%c%c", _EOT, 0x00);
ComWrt (rkc.COM, Buff, 1);
}
return RTNval;
}
int post(int run)
{
int ret_val;
int test_item, index;
int byte_in_queue ; // old: int byte_in_queue ;
char portname[6];
//char hwID_limit[5] = {" "} ;
char pos_capture[3000];
//char char_read ;
double begin, end ;
float testtime ;
FillBytes(portname, 0, 5, 32) ;
portname[5] = '\0' ;
sprintf(portname,"COM%d",g_dev_serial_port) ;
//test_item = InsertTestItem("RESET test", NULL, NULL, NULL, NULL);
ret_val = ConfirmMessage ("Turn unit back on", "Press the Power button and the Reset button. Did the three LEDs flash?");
/********************************************************************************
if (ret_val == YES)
UpdateTestItem(test_item, "RESET test", NULL, NULL, NULL, "PASS") ;
else
UpdateTestItem(test_item, "RESET test", NULL, NULL, NULL, "FAIL");
****************************************************************************/
Delay(1.0) ;
//test_item = InsertTestItem("Power On Self Test",NULL,NULL,NULL,NULL);
begin = Timer() ;
FillBytes(pos_capture, 0, 2999, 32);
pos_capture[2999] = '\0' ;
test_item = InsertTestItem("Opening device port",NULL,NULL,NULL,NULL);
ret_val = OpenComConfig (g_dev_serial_port, portname, 115200, 0, 8, 1, 512, 512);
if (ret_val < 0)
{
UpdateTestItem(test_item, "Opening UUT port", "ERROR", NULL, NULL, "FAIL") ;
return FAILURE ;
}
else
UpdateTestItem(test_item, "Opening UUT port", NULL, NULL, NULL, "PASS") ;
if (!run)
{
ComWrtByte (1, 'n');
}
else
{
ComWrtByte (1, 'Y');
test_item = InsertTestItem("Power On Self Test",NULL,NULL,NULL,NULL);
SetComTime(g_dev_serial_port, 5.0) ;
FlushInQ(g_dev_serial_port) ;
FlushOutQ(g_dev_serial_port) ;
//ComRd(g_dev_serial_port, pos_capture, 3000) ;
for (index = 0; index < 2999; index++)
{
byte_in_queue = ComRdByte(g_dev_serial_port) ;
if (byte_in_queue < 0)
break ; // no more byte to read
if ( (byte_in_queue == CR) || (byte_in_queue == LF) )
pos_capture[index] = 32 ;
else
pos_capture[index] = (char) byte_in_queue;
} // for all chars in COM buffer
index = FindPattern(pos_capture, 0, -1, "failed", 0, 0) ;
if (index > 0)
{
//test_item = InsertTestItem("Power On Self Test",NULL,NULL,NULL,"FAILED");
UpdateTestItem(test_item,NULL,NULL,NULL,NULL,"FAIL");
return FAILURE ;
}
else
//test_item = InsertTestItem("Power On Self Test",NULL,NULL,NULL,"PASS");
UpdateTestItem(test_item,NULL,NULL,NULL,NULL,"PASS");
} // else, perform post test
return SUCCESS ;
}