/*
* ======== main ========
*/
int main()
{
PIN_init(BoardGpioInitTable);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint(Power_SB_DISALLOW);
Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif // POWER_SAVING
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
/* Kick off application - Priority 1 */
SimpleBLEBroadcaster_createTask();
BIOS_start(); /* enable interrupts and start SYS/BIOS */
return 0;
}
/*******************************************************************************
* @fn Main
*
* @brief Application Main
*
* input parameters
*
* @param None.
*
* output parameters
*
* @param None.
*
* @return None.
*/
int main()
{
/* Register Application callback to trap asserts raised in the Stack */
RegisterAssertCback(AssertHandler);
PIN_init(BoardGpioInitTable);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint (PowerCC26XX_SB_DISALLOW);
Power_setConstraint (PowerCC26XX_IDLE_PD_DISALLOW);
#endif //POWER_SAVING
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
/* Kick off application - Priority 1 */
CyclingSensor_createTask();
/* enable interrupts and start SYS/BIOS */
BIOS_start();
return 0;
}
/*
* ======== main ========
*/
int main()
{
PIN_init(BoardGpioInitTable);
//enable iCache prefetching
VIMSConfigure(VIMS_BASE, TRUE, TRUE);
// Enable cache
VIMSModeSet(VIMS_BASE, VIMS_MODE_ENABLED);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint (Power_SB_DISALLOW);
Power_setConstraint (Power_IDLE_PD_DISALLOW);
#endif //POWER_SAVING
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
/* Kick off application - Priority 1 */
ProximityTag_createTask();
/* enable interrupts and start SYS/BIOS */
BIOS_start();
return 0;
}
/*
* ======== main ========
*/
int main()
{
PIN_init(BoardGpioInitTable);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint(Power_SB_DISALLOW);
Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif // POWER_SAVING
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
#ifdef PRINTF_ENABLED
// Enable System_printf(..) UART output
UART_Params uartParams;
UART_Params_init(&uartParams);
uartParams.baudRate = 921600;
UartPrintf_init(UART_open(Board_UART, &uartParams));
#endif
/* Kick off profile - Priority 3 */
GAPRole_createTask();
SimpleBLEPeripheral_createTask();
#ifdef FEATURE_OAD
{
uint8_t counter;
uint32_t *vectorTable = (uint32_t*) 0x20000000;
#if defined(__IAR_SYSTEMS_ICC__)
uint32_t *flashVectors = &__vector_table;
#elif defined(__TI_COMPILER_VERSION__)
uint32_t *flashVectors = &ti_sysbios_family_arm_m3_Hwi_resetVectors;
#endif //Compiler.
// Write image specific interrupt vectors into RAM vector table.
for(counter = 0; counter < 15; ++counter)
{
*vectorTable++ = *flashVectors++;
}
}
#endif //FEATURE_OAD
/* enable interrupts and start SYS/BIOS */
BIOS_start();
return 0;
}
/*******************************************************************************
* @fn Main
*
* @brief Application Main
*
* input parameters
*
* @param None.
*
* output parameters
*
* @param None.
*
* @return None.
*/
int main()
{
#ifdef CACHE_AS_RAM
// Invalidate cache
VIMSModeSet( VIMS_BASE, VIMS_MODE_DISABLED );
// Wait for disabling to be complete
while ( VIMSModeGet( VIMS_BASE ) != VIMS_MODE_DISABLED );
// retain cache during standby
Power_setConstraint(PowerCC26XX_SB_VIMS_CACHE_RETAIN);
#endif
RegisterAssertCback(AssertHandler);
PIN_init(BoardGpioInitTable);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint(PowerCC26XX_SB_DISALLOW);
Power_setConstraint(PowerCC26XX_IDLE_PD_DISALLOW);
#endif //POWER_SAVING
#ifdef PRINTF_ENABLED
// Enable System_printf(..) UART output
UART_Params uartParams;
UART_Params_init(&uartParams);
uartParams.baudRate = 1000000;
UartPrintf_init(UART_open(Board_UART, &uartParams));
System_printf("Printf enabled\r\n");
#endif
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
Keys_createTask();
/* Kick off application - Priority 1 */
SimpleTopology_createTask();
/* enable interrupts and start SYS/BIOS */
BIOS_start();
return 0;
}
/*
* ======== main ========
*/
Void main()
{
PIN_init(BoardGpioInitTable);
//enable iCache prefetching
VIMSConfigure(VIMS_BASE, TRUE, TRUE);
// Enable cache
VIMSModeSet(VIMS_BASE, VIMS_MODE_ENABLED);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint(Power_SB_DISALLOW);
Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif // POWER_SAVING
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
nanoARCApplication_createTask();
#ifdef FEATURE_OAD_BIM
{
uint8_t counter;
uint32_t *vectorTable = (uint32_t*) 0x20000000;
uint32_t *flashVectors = &__vector_table;
// Write image specific interrupt vectors into RAM vector table.
for(counter = 0; counter < 15; ++counter)
{
*vectorTable++ = *flashVectors++;
}
}
#endif //FEATURE_OAD_BIM
/* enable interrupts and start SYS/BIOS */
BIOS_start();
}
/*
* ======== main ========
*/
int main()
{
PIN_init(BoardGpioInitTable);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint(Power_SB_DISALLOW);
Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif // POWER_SAVING
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
OadTargetApp_createTask();
#ifdef FEATURE_OAD
{
uint8_t counter;
uint32_t *vectorTable = (uint32_t*) 0x20000000;
uint32_t *flashVectors = &__vector_table;
// Write image specific interrupt vectors into RAM vector table.
for(counter = 0; counter < 15; ++counter)
{
*vectorTable++ = *flashVectors++;
}
}
#endif //FEATURE_OAD
/* enable interrupts and start SYS/BIOS */
BIOS_start();
return 0;
}
int main()
{
PIN_init(BoardGpioInitTable);
//Board_initGeneral();
#ifndef POWER_SAVING
/* Set constraints for Standby and Idle mode */
Power_setConstraint(Power_SB_DISALLOW);
Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif // POWER_SAVING
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
/* Kick off application - Priority 1 */
SensorTag_createTask();
SensorTagTmp_createTask();
SensorTagHum_createTask();
SensorTagBar_createTask();
//UART_init();
//UART_Params uartParams;
//UART_Params_init(&uartParams);
//uartParams.baudRate = 115200;
//UartPrintf_init(UART_open(Board_UART, &uartParams));
System_printf("Hello World :)");
System_flush();
//printf("Hello World :) 2");
BIOS_start(); /* enable interrupts and start SYS/BIOS */
return 0;
}
/*
* ======== main ========
*/
Void main()
{
PIN_init(BoardGpioInitTable);
//enable iCache prefetching
VIMSConfigure(VIMS_BASE, TRUE, TRUE);
// Enable cache
VIMSModeSet(VIMS_BASE, VIMS_MODE_ENABLED);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint(Power_SB_DISALLOW);
Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif // POWER_SAVING
//Initialize task
Task_Params params;
Task_Params_init(¶ms);
params.priority = TASK_PRI;
params.stackSize = TASK_STACK_SIZE;
params.stack = taskStack;
//semaphore init
Semaphore_Params sParams;
Semaphore_Params_init(&sParams);
sParams.mode = Semaphore_Mode_BINARY;
/* Initialize ICall module */
ICall_init();
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
/* Kick off profile - Priority 3 */
GAPRole_createTask();
SimpleBLEPeripheral_createTask();
//Contruct task
Task_construct(&taskStruct, taskFxn, ¶ms, NULL);
// Construct semaphore used for pending in task ADC
Semaphore_construct(&sem, 0, &sParams);
hSem = Semaphore_handle(&sem);
#ifdef FEATURE_OAD_BIM
{
uint8_t counter;
uint32_t *vectorTable = (uint32_t*) 0x20000000;
uint32_t *flashVectors = &__vector_table;
// Write image specific interrupt vectors into RAM vector table.
for(counter = 0; counter < 15; ++counter)
{
*vectorTable++ = *flashVectors++;
}
}
#endif //FEATURE_OAD_BIM
/* enable interrupts and start SYS/BIOS */
BIOS_start();
}
/*
* ======== main ========
*/
int main()
{
SB_Error error;
PIN_init(BoardGpioInitTable);
#ifndef POWER_SAVING
/* Set constraints for Standby, powerdown and idle mode */
Power_setConstraint(Power_SB_DISALLOW);
Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif // POWER_SAVING
/* Initialize ICall module */
ICall_init();
#ifdef SB_DEBUG
System_printf("ICall Initialized.\n");
System_flush();
#endif
/* Start tasks of external images - Priority 5 */
ICall_createRemoteTasks();
#ifdef SB_DEBUG
System_printf("ICall Remote Tasks Initialized.\n");
System_flush();
#endif
/* Kick off profile - Priority 3 */
GAPRole_createTask();
#ifdef SB_DEBUG
System_printf("GAP Role Initialized.\n");
System_flush();
#endif
/* enable I2C */
if (NoError != (error = SB_i2cInit((I2C_BitRate) I2C_BITRATE))) {
#ifdef SB_DEBUG
System_printf("Error No: %d\n", error);
System_printf("SB application initialization failed while initializing I2C. This is a code error.\n");
System_flush();
#endif
while(1);
}
#ifdef SB_DEBUG
System_printf("I2C Initialized.\n");
System_flush();
#endif
/* enable peripheral manager after I2C */
if (NoError != (error = SB_peripheralInit())) {
#ifdef SB_DEBUG
System_printf("Error No: %d\n", error);
System_printf("SB application initialization failed while initializing peripherals. This is a code error.\n");
System_flush();
#endif
while(1);
}
#ifdef SB_DEBUG
System_printf("Peripherals Initialized.\n");
System_flush();
#endif
/* Configure BLE */
SB_bleInit();
#ifdef SB_DEBUG
System_printf("SB BLE Initialized.\n");
System_flush();
#endif
/* enable interrupts and start SYS/BIOS */
#ifdef SB_DEBUG
System_printf("Smart Bandage Initialized.\n");
System_flush();
#endif
BIOS_start();
return 0;
}