void PCB_BASE_FRAME::UseGalCanvas()
{
EDA_DRAW_FRAME::UseGalCanvas();
EDA_DRAW_PANEL_GAL* galCanvas = GetGalCanvas();
if( m_toolManager )
{
m_toolManager->SetEnvironment( m_Pcb, GetGalCanvas()->GetView(),
GetGalCanvas()->GetViewControls(), this );
}
SetBoard( m_Pcb );
if( m_toolManager )
m_toolManager->ResetTools( TOOL_BASE::GAL_SWITCH );
// Transfer latest current display options from legacy to GAL canvas:
auto painter = static_cast<KIGFX::PCB_PAINTER*>( galCanvas->GetView()->GetPainter() );
auto settings = painter->GetSettings();
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
settings->LoadDisplayOptions( displ_opts, ShowPageLimits() );
galCanvas->GetView()->RecacheAllItems();
galCanvas->SetEventDispatcher( m_toolDispatcher );
galCanvas->StartDrawing();
}
void FOOTPRINT_EDIT_FRAME::OnUpdateOptionsToolbar( wxUpdateUIEvent& aEvent )
{
int id = aEvent.GetId();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
bool state = false;
switch( id )
{
case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH:
state = displ_opts->m_DisplayModTextFill == SKETCH;
break;
case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH:
state = displ_opts->m_DisplayModEdgeFill == SKETCH;
break;
case ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE:
state = displ_opts->m_ContrastModeDisplay;
break;
default:
wxMessageBox( wxT( "FOOTPRINT_EDIT_FRAME::OnUpdateOptionsToolbar error" ) );
break;
}
aEvent.Check( state );
}
void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
bool tmp = displ_opts->m_DisplayDrawItemsFill;
if( Segment == NULL )
return;
int mask = EDA_ITEM_ALL_FLAGS - ( SELECTED | HIGHLIGHTED | BRIGHTENED );
if( Segment->IsNew() ) // Trace in progress.
{
// Delete current segment.
displ_opts->m_DisplayDrawItemsFill = SKETCH;
Segment->Draw( m_canvas, DC, GR_XOR );
Segment->DeleteStructure();
displ_opts->m_DisplayDrawItemsFill = tmp;
SetCurItem( NULL );
}
else if( ( Segment->GetFlags() & mask ) == 0 ) // i.e. not edited, or moved
{
Segment->Draw( m_canvas, DC, GR_XOR );
Segment->ClearFlags();
SaveCopyInUndoList(Segment, UR_DELETED);
Segment->UnLink();
SetCurItem( NULL );
OnModify();
}
}
void PCB_BASE_FRAME::OnTogglePadDrawMode( wxCommandEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayPadFill = !displ_opts->m_DisplayPadFill;
EDA_DRAW_PANEL_GAL* gal = GetGalCanvas();
if( gal )
{
// Apply new display options to the GAL canvas
KIGFX::PCB_PAINTER* painter =
static_cast<KIGFX::PCB_PAINTER*> ( gal->GetView()->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*> ( painter->GetSettings() );
settings->LoadDisplayOptions( displ_opts );
// Update pads
BOARD* board = GetBoard();
for( MODULE* module = board->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
pad->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
m_canvas->Refresh();
}
void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMaskLayer,
bool aPrintMirrorMode,
void * aData)
{
const GR_DRAWMODE drawmode = (GR_DRAWMODE) 0;
int defaultPenSize = Millimeter2iu( 0.2 );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
DISPLAY_OPTIONS save_opt;
PRINT_PARAMETERS * printParameters = (PRINT_PARAMETERS*) aData; // can be null
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
defaultPenSize = printParameters->m_PenDefaultSize;
save_opt = *displ_opts;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
wxSize pageSizeIU = GetPageSizeIU() / 2;
wxPoint offset( pageSizeIU.x, pageSizeIU.y );
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
{
module->Move( offset );
Print_Module( m_canvas, aDC, module, drawmode, aPrintMaskLayer, drillShapeOpt );
module->Move( -offset );
}
D_PAD::m_PadSketchModePenSize = tmp;
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
}
void PCB_BASE_FRAME::OnUpdatePadDrawMode( wxUpdateUIEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( !displ_opts->m_DisplayPadFill );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_PADS_SKETCH,
displ_opts->m_DisplayPadFill ?
_( "Show pads in outline mode" ) :
_( "Show pads in fill mode" ) );
}
void PCB_EDIT_FRAME::OnUpdateTraceDrawMode( wxUpdateUIEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( !displ_opts->m_DisplayPcbTrackFill );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_TRACKS_SKETCH,
displ_opts->m_DisplayPcbTrackFill ?
_( "Show tracks in outline mode" ) :
_( "Show tracks in fill mode" ) );
}
void PCB_EDIT_FRAME::OnUpdateHighContrastDisplayMode( wxUpdateUIEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( displ_opts->m_ContrastModeDisplay );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE,
displ_opts->m_ContrastModeDisplay ?
_( "Normal contrast display mode" ) :
_( "High contrast display mode" ) );
}
void PCB_BASE_FRAME::OnTogglePolarCoords( wxCommandEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
SetStatusText( wxEmptyString );
displ_opts->m_DisplayPolarCood = !displ_opts->m_DisplayPolarCood;
UpdateStatusBar();
}
void PCB_EDIT_FRAME::OnUpdateShowModuleRatsnest( wxUpdateUIEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( displ_opts->m_Show_Module_Ratsnest );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_RATSNEST,
displ_opts->m_Show_Module_Ratsnest ?
_( "Hide footprint ratsnest" ) :
_( "Show footprint ratsnest" ) );
}
void PCB_EDIT_FRAME::OnUpdateViaDrawMode( wxUpdateUIEvent& aEvent )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( !displ_opts->m_DisplayViaFill );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_VIAS_SKETCH,
displ_opts->m_DisplayViaFill ?
_( "Show vias in outline mode" ) :
_( "Show vias in fill mode" ) );
}
void PCB_EDIT_FRAME::OnUpdateZoneDisplayStyle( wxUpdateUIEvent& aEvent )
{
int selected = aEvent.GetId() - ID_TB_OPTIONS_SHOW_ZONES;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( aEvent.IsChecked() && ( displ_opts->m_DisplayZonesMode == selected ) )
return;
aEvent.Check( displ_opts->m_DisplayZonesMode == selected );
}
void PCB_BASE_FRAME::OnUpdateCoordType( wxUpdateUIEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
aEvent.Check( displ_opts->m_DisplayPolarCood );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_POLAR_COORD,
displ_opts->m_DisplayPolarCood ?
_( "Display rectangular coordinates" ) :
_( "Display polar coordinates" ) );
}
void DISPLAY_FOOTPRINTS_FRAME::OnUpdateLineDrawMode( wxUpdateUIEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
wxString msgEdgesFill[2] = { _( "Show outlines in filled mode" ),
_( "Show outlines in sketch mode" ) };
int i = displ_opts->m_DisplayModEdgeFill == SKETCH ? 0 : 1;
aEvent.Check( displ_opts->m_DisplayModEdgeFill == SKETCH );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH, msgEdgesFill[i] );
}
void DISPLAY_FOOTPRINTS_FRAME::OnUpdateTextDrawMode( wxUpdateUIEvent& aEvent )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
wxString msgTextsFill[2] = { _( "Show texts in filled mode" ),
_( "Show texts in sketch mode" ) };
unsigned i = displ_opts->m_DisplayModTextFill == SKETCH ? 0 : 1;
aEvent.Check( displ_opts->m_DisplayModTextFill == SKETCH );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH, msgTextsFill[i] );
}
// Note: virtual, overridden in PCB_EDIT_FRAME;
void PCB_BASE_FRAME::SwitchLayer( wxDC* DC, LAYER_ID layer )
{
LAYER_ID preslayer = GetActiveLayer();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// Check if the specified layer matches the present layer
if( layer == preslayer )
return;
// Copper layers cannot be selected unconditionally; how many
// of those layers are currently enabled needs to be checked.
if( IsCopperLayer( layer ) )
{
// If only one copper layer is enabled, the only such layer
// that can be selected to is the "Copper" layer (so the
// selection of any other copper layer is disregarded).
if( m_Pcb->GetCopperLayerCount() < 2 )
{
if( layer != B_Cu )
{
return;
}
}
// If more than one copper layer is enabled, the "Copper"
// and "Component" layers can be selected, but the total
// number of copper layers determines which internal
// layers are also capable of being selected.
else
{
if( ( layer != B_Cu ) && ( layer != F_Cu )
&& ( layer >= m_Pcb->GetCopperLayerCount() - 1 ) )
{
return;
}
}
}
// Is yet more checking required? E.g. when the layer to be selected
// is a non-copper layer, or when switching between a copper layer
// and a non-copper layer, or vice-versa?
// ...
GetScreen()->m_Active_Layer = layer;
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
}
void PCB_BASE_FRAME::OnToggleTextDrawMode( wxCommandEvent& aEvent )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayModTextFill = !displ_opts->m_DisplayModTextFill;
EDA_DRAW_PANEL_GAL* gal = GetGalCanvas();
if( gal )
{
// Apply new display options to the GAL canvas
auto view = static_cast<KIGFX::PCB_VIEW*>( gal->GetView() );
view->UpdateDisplayOptions( displ_opts );
view->MarkTargetDirty( KIGFX::TARGET_NONCACHED );
}
m_canvas->Refresh();
}
void DISPLAY_FOOTPRINTS_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
{
int id = event.GetId();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
switch( id )
{
case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH:
displ_opts->m_DisplayModTextFill = displ_opts->m_DisplayModTextFill == FILLED ? SKETCH : FILLED;
m_canvas->Refresh( );
break;
case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH:
displ_opts->m_DisplayModEdgeFill = displ_opts->m_DisplayModEdgeFill == FILLED ? SKETCH : FILLED;
m_canvas->Refresh();
break;
default:
DisplayError( this,
wxT( "DISPLAY_FOOTPRINTS_FRAME::OnSelectOptionToolbar error" ) );
break;
}
}
void PCB_BASE_FRAME::SetToolID( int aId, int aCursor, const wxString& aToolMsg )
{
bool redraw = false;
EDA_DRAW_FRAME::SetToolID( aId, aCursor, aToolMsg );
if( aId < 0 )
return;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// handle color changes for transitions in and out of ID_TRACK_BUTT
if( ( GetToolId() == ID_TRACK_BUTT && aId != ID_TRACK_BUTT )
|| ( GetToolId() != ID_TRACK_BUTT && aId == ID_TRACK_BUTT ) )
{
if( displ_opts->m_ContrastModeDisplay )
redraw = true;
}
// must do this after the tool has been set, otherwise pad::Draw() does
// not show proper color when GetDisplayOptions().ContrastModeDisplay is true.
if( redraw && m_canvas )
m_canvas->Refresh();
}
void FOOTPRINT_EDIT_FRAME::OnUpdateOptionsToolbar( wxUpdateUIEvent& aEvent )
{
int id = aEvent.GetId();
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
bool state = false;
switch( id )
{
case ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE:
state = displ_opts->m_ContrastModeDisplay;
break;
case ID_MODEDIT_SHOW_HIDE_SEARCH_TREE:
state = IsSearchTreeShown();
break;
default:
wxMessageBox( "FOOTPRINT_EDIT_FRAME::OnUpdateOptionsToolbar error" );
break;
}
aEvent.Check( state );
}
void PCB_BASE_FRAME::OnTogglePadDrawMode( wxCommandEvent& aEvent )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayPadFill = !displ_opts->m_DisplayPadFill;
EDA_DRAW_PANEL_GAL* gal = GetGalCanvas();
if( gal )
{
// Apply new display options to the GAL canvas
auto view = static_cast<KIGFX::PCB_VIEW*>( gal->GetView() );
view->UpdateDisplayOptions( displ_opts );
// Update pads
BOARD* board = GetBoard();
for( MODULE* module = board->m_Modules; module; module = module->Next() )
{
for( auto pad : module->Pads() )
view->Update( pad, KIGFX::GEOMETRY );
}
}
m_canvas->Refresh();
}
DISPLAY_FOOTPRINTS_FRAME::DISPLAY_FOOTPRINTS_FRAME( KIWAY* aKiway, CVPCB_MAINFRAME* aParent ) :
PCB_BASE_FRAME( aKiway, aParent, FRAME_CVPCB_DISPLAY, _( "Footprint Viewer" ),
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, FOOTPRINTVIEWER_FRAME_NAME )
{
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_cvpcb_xpm ) );
SetIcon( icon );
SetBoard( new BOARD() );
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
LoadSettings( config() );
// Initialize grid id to a default value if not found in config or incorrect:
if( !( GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) ) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_500 - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 );
// Initialize some display options
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayPadIsol = false; // Pad clearance has no meaning here
// Track and via clearance has no meaning here.
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) );
if( m_drawToolBar ) // Currently, no vertical right toolbar.
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right() );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DisplayFrame" ) ).CentrePane() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
m_auimgr.Update();
Show( true );
}
void PCB_BASE_FRAME::OnToggleGraphicDrawMode( wxCommandEvent& aEvent )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayDrawItemsFill = !displ_opts->m_DisplayDrawItemsFill;
m_canvas->Refresh();
}
PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetConfigurationSettings()
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( m_configSettings.empty() )
{
COLORS_DESIGN_SETTINGS cds; // constructor fills this with sensible colors
// Units used in dialogs and toolbars
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "Units" ),
(int*)&g_UserUnit, MILLIMETRES ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DisplayPolarCoords" ),
&displ_opts->m_DisplayPolarCood, false ) );
// Display options and modes:
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ViaHoleDisplayMode" ),
(int*) &displ_opts->m_DisplayViaMode,
VIA_SPECIAL_HOLE_SHOW, VIA_HOLE_NOT_SHOW,
OPT_VIA_HOLE_END - 1 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ShowNetNamesMode" ),
&displ_opts->m_DisplayNetNamesMode, 3, 0, 3 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DisplayTrackFilled" ),
&displ_opts->m_DisplayPcbTrackFill, true ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TrackDisplayClearance" ),
(int*) &displ_opts->m_ShowTrackClearanceMode,
SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadFill" ),
&displ_opts->m_DisplayPadFill, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ViaFill" ),
&displ_opts->m_DisplayViaFill, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadAffG" ),
&displ_opts->m_DisplayPadIsol, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadSNum" ),
&displ_opts->m_DisplayPadNum, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ModAffC" ),
&displ_opts->m_DisplayModEdgeFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ModAffT" ),
&displ_opts->m_DisplayModTextFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PcbAffT" ),
&displ_opts->m_DisplayDrawItemsFill, FILLED ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbShowZonesMode" ),
&displ_opts->m_DisplayZonesMode, 0, 0, 2 ) );
// layer colors:
wxASSERT( DIM( cds.m_LayersColors ) == LAYER_ID_COUNT );
for( int i = 0; i<LAYER_ID_COUNT; ++i )
{
wxString vn = wxString::Format(
wxT( "ColorPCBLayer_%s" ),
LSET::Name( LAYER_ID( i ) ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, vn, LOC_COLOR( i ), cds.m_LayersColors[i] ) );
}
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorTxtFrontEx" ),
ITEM_COLOR( MOD_TEXT_FR_VISIBLE ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorTxtBackEx" ),
ITEM_COLOR( MOD_TEXT_BK_VISIBLE ),
BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorTxtInvisEx" ),
ITEM_COLOR( MOD_TEXT_INVISIBLE ),
DARKGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorAnchorEx" ),
ITEM_COLOR( ANCHOR_VISIBLE ), BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorPadBackEx" ),
ITEM_COLOR( PAD_BK_VISIBLE ), GREEN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorPadFrontEx" ),
ITEM_COLOR( PAD_FR_VISIBLE ), RED ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorViaThruEx" ),
ITEM_COLOR( VIA_THROUGH_VISIBLE ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorViaBBlindEx" ),
ITEM_COLOR( VIA_BBLIND_VISIBLE ),
BROWN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorViaMicroEx" ),
ITEM_COLOR( VIA_MICROVIA_VISIBLE ),
CYAN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorNonPlatedEx" ),
ITEM_COLOR( NON_PLATED_VISIBLE ),
YELLOW ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColorRatsEx" ),
ITEM_COLOR( RATSNEST_VISIBLE ),
WHITE ) );
// Miscellaneous:
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "RotationAngle" ), &m_rotationAngle,
900, 1, 900 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "MaxLnkS" ),
&displ_opts->m_MaxLinksShowed,
3, 0, 15 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ShowMRa" ),
&displ_opts->m_Show_Module_Ratsnest, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "TwoSegT" ),
&g_TwoSegmentTrackBuild, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "SegmPcb45Only" )
, &g_Segments_45_Only, true ) );
}
return m_configSettings;
}
void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMask,
bool aPrintMirrorMode,
void* aData)
{
const GR_DRAWMODE drawmode = (GR_DRAWMODE) 0;
DISPLAY_OPTIONS save_opt;
BOARD* Pcb = GetBoard();
int defaultPenSize = Millimeter2iu( 0.2 );
bool onePagePerLayer = false;
PRINT_PARAMETERS* printParameters = (PRINT_PARAMETERS*) aData; // can be null
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( printParameters && printParameters->m_OptionPrintPage == 0 )
onePagePerLayer = true;
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
{
drillShapeOpt = printParameters->m_DrillShapeOpt;
defaultPenSize = printParameters->m_PenDefaultSize;
}
save_opt = *displ_opts;
LAYER_ID activeLayer = GetScreen()->m_Active_Layer;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
if( !( aPrintMask & LSET::AllCuMask() ).any() )
{
if( onePagePerLayer )
{
// We can print mask layers (solder mask and solder paste) with the actual
// pad sizes. To do that, we must set ContrastModeDisplay to true and set
// the GetScreen()->m_Active_Layer to the current printed layer
displ_opts->m_ContrastModeDisplay = true;
displ_opts->m_DisplayPadFill = true;
// Calculate the active layer number to print from its mask layer:
GetScreen()->m_Active_Layer = B_Cu;
for( LAYER_NUM id = LAYER_ID_COUNT-1; id >= 0; --id )
{
if( aPrintMask[id] )
{
GetScreen()->m_Active_Layer = LAYER_ID( id );
break;
}
}
// pads on Silkscreen layer are usually plot in sketch mode:
if( GetScreen()->m_Active_Layer == B_SilkS ||
GetScreen()->m_Active_Layer == F_SilkS )
{
displ_opts->m_DisplayPadFill = false;
}
}
else
{
displ_opts->m_DisplayPadFill = false;
}
}
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible( NO_CONNECTS_VISIBLE );
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, false );
bool anchorsTmp = GetBoard()->IsElementVisible( ANCHOR_VISIBLE );
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, false );
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
for( BOARD_ITEM* item = Pcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
case PCB_DIMENSION_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
if( aPrintMask[item->GetLayer()] )
item->Draw( m_canvas, aDC, drawmode );
break;
case PCB_MARKER_T:
default:
break;
}
}
// Print tracks
for( TRACK* track = Pcb->m_Track; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
if( track->Type() == PCB_VIA_T ) // VIA encountered.
{
int radius = track->GetWidth() / 2;
const VIA* via = static_cast<const VIA*>( track );
EDA_COLOR_T color = g_ColorsSettings.GetItemColor( VIAS_VISIBLE + via->GetViaType() );
GRFilledCircle( m_canvas->GetClipBox(), aDC,
via->GetStart().x,
via->GetStart().y,
radius,
0, color, color );
}
else
{
track->Draw( m_canvas, aDC, drawmode );
}
}
// Outdated: only for compatibility to old boards
for( TRACK* track = Pcb->m_Zone; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
track->Draw( m_canvas, aDC, drawmode );
}
// Draw filled areas (i.e. zones)
for( int ii = 0; ii < Pcb->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = Pcb->GetArea( ii );
if( aPrintMask[zone->GetLayer()] )
zone->DrawFilledArea( m_canvas, aDC, drawmode );
}
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
for( MODULE* module = (MODULE*) Pcb->m_Modules; module; module = module->Next() )
{
Print_Module( m_canvas, aDC, module, drawmode, aPrintMask, drillShapeOpt );
}
D_PAD::m_PadSketchModePenSize = tmp;
/* Print via holes in bg color: Not sure it is good for buried or blind
* vias */
if( drillShapeOpt != PRINT_PARAMETERS::NO_DRILL_SHAPE )
{
TRACK* track = Pcb->m_Track;
EDA_COLOR_T color = WHITE;
bool blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
for( ; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
if( track->Type() == PCB_VIA_T ) // VIA encountered.
{
int diameter;
const VIA *via = static_cast<const VIA*>( track );
if( drillShapeOpt == PRINT_PARAMETERS::SMALL_DRILL_SHAPE )
diameter = std::min( SMALL_DRILL, via->GetDrillValue() );
else
diameter = via->GetDrillValue();
GRFilledCircle( m_canvas->GetClipBox(), aDC,
track->GetStart().x, track->GetStart().y,
diameter/2,
0, color, color );
}
}
GRForceBlackPen( blackpenstate );
}
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetScreen()->m_Active_Layer = activeLayer;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, anchorsTmp );
}
void PCB_EDIT_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
{
int id = event.GetId();
bool state = event.IsChecked();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
switch( id )
{
case ID_TB_OPTIONS_DRC_OFF:
g_Drc_On = !state;
if( GetToolId() == ID_TRACK_BUTT )
{
if( g_Drc_On )
m_canvas->SetCursor( wxCURSOR_PENCIL );
else
m_canvas->SetCursor( wxCURSOR_QUESTION_ARROW );
}
break;
case ID_TB_OPTIONS_SHOW_RATSNEST:
SetElementVisibility( RATSNEST_VISIBLE, state );
OnModify();
if( state && (GetBoard()->m_Status_Pcb & LISTE_RATSNEST_ITEM_OK) == 0 )
Compile_Ratsnest( NULL, true );
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_AUTO_DEL_TRACK:
g_AutoDeleteOldTrack = state;
break;
case ID_TB_OPTIONS_SHOW_ZONES:
displ_opts->m_DisplayZonesMode = 0;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_ZONES_DISABLE:
displ_opts->m_DisplayZonesMode = 1;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_ZONES_OUTLINES_ONLY:
displ_opts->m_DisplayZonesMode = 2;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_VIAS_SKETCH:
displ_opts->m_DisplayViaFill = !state;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_TRACKS_SKETCH:
displ_opts->m_DisplayPcbTrackFill = !state;
m_canvas->Refresh();
break;
case ID_TB_OPTIONS_SHOW_HIGH_CONTRAST_MODE:
{
displ_opts->m_ContrastModeDisplay = state;
m_canvas->Refresh();
break;
}
case ID_TB_OPTIONS_SHOW_EXTRA_VERTICAL_TOOLBAR_MICROWAVE:
m_show_microwave_tools = state;
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR,
m_show_microwave_tools ?
_( "Hide Microwave Toolbar" ): _( "Show Microwave Toolbar" ));
break;
case ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR:
// show auxiliary Vertical layers and visibility manager toolbar
m_show_layer_manager_tools = state;
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG,
m_show_layer_manager_tools ?
_( "Hide &Layers Manager" ) : _( "Show &Layers Manager" ) );
break;
default:
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnSelectOptionToolbar error \n (event not handled!)" ) );
break;
}
}
/*
* Update the status bar information.
*/
void PCB_BASE_FRAME::UpdateStatusBar()
{
PCB_SCREEN* screen = GetScreen();
if( !screen )
return;
int dx;
int dy;
double dXpos;
double dYpos;
wxString line;
wxString locformatter;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
EDA_DRAW_FRAME::UpdateStatusBar();
if( displ_opts->m_DisplayPolarCood ) // display polar coordinates
{
double theta, ro;
dx = GetCrossHairPosition().x - screen->m_O_Curseur.x;
dy = GetCrossHairPosition().y - screen->m_O_Curseur.y;
theta = ArcTangente( -dy, dx ) / 10;
ro = hypot( dx, dy );
wxString formatter;
switch( g_UserUnit )
{
case INCHES:
formatter = wxT( "Ro %.6f Th %.1f" );
break;
case MILLIMETRES:
formatter = wxT( "Ro %.6f Th %.1f" );
break;
case UNSCALED_UNITS:
formatter = wxT( "Ro %f Th %f" );
break;
case DEGREES:
wxASSERT( false );
break;
}
line.Printf( formatter, To_User_Unit( g_UserUnit, ro ), theta );
SetStatusText( line, 3 );
}
// Display absolute coordinates:
dXpos = To_User_Unit( g_UserUnit, GetCrossHairPosition().x );
dYpos = To_User_Unit( g_UserUnit, GetCrossHairPosition().y );
// The following sadly is an if Eeschema/if Pcbnew
wxString absformatter;
switch( g_UserUnit )
{
case INCHES:
absformatter = wxT( "X %.6f Y %.6f" );
locformatter = wxT( "dx %.6f dy %.6f dist %.4f" );
break;
case MILLIMETRES:
absformatter = wxT( "X %.6f Y %.6f" );
locformatter = wxT( "dx %.6f dy %.6f dist %.3f" );
break;
case UNSCALED_UNITS:
absformatter = wxT( "X %f Y %f" );
locformatter = wxT( "dx %f dy %f dist %f" );
break;
case DEGREES:
wxASSERT( false );
break;
}
line.Printf( absformatter, dXpos, dYpos );
SetStatusText( line, 2 );
if( !displ_opts->m_DisplayPolarCood ) // display relative cartesian coordinates
{
// Display relative coordinates:
dx = GetCrossHairPosition().x - screen->m_O_Curseur.x;
dy = GetCrossHairPosition().y - screen->m_O_Curseur.y;
dXpos = To_User_Unit( g_UserUnit, dx );
dYpos = To_User_Unit( g_UserUnit, dy );
// We already decided the formatter above
line.Printf( locformatter, dXpos, dYpos, hypot( dXpos, dYpos ) );
SetStatusText( line, 3 );
}
}
BOARD_ITEM* PCB_BASE_FRAME::PcbGeneralLocateAndDisplay( int aHotKeyCode )
{
BOARD_ITEM* item;
GENERAL_COLLECTORS_GUIDE guide = GetCollectorsGuide();
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
// Assign to scanList the proper item types desired based on tool type
// or hotkey that is in play.
const KICAD_T* scanList = NULL;
if( aHotKeyCode )
{
// @todo: add switch here and add calls to PcbGeneralLocateAndDisplay( int aHotKeyCode )
// when searching is needed from a hotkey handler
}
else if( GetToolId() == ID_NO_TOOL_SELECTED )
{
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
scanList = GENERAL_COLLECTOR::Modules;
else
scanList = (displ_opts->m_DisplayZonesMode == 0) ?
GENERAL_COLLECTOR::AllBoardItems :
GENERAL_COLLECTOR::AllButZones;
}
else
{
switch( GetToolId() )
{
case ID_PCB_SHOW_1_RATSNEST_BUTT:
scanList = GENERAL_COLLECTOR::PadsOrModules;
break;
case ID_TRACK_BUTT:
scanList = GENERAL_COLLECTOR::Tracks;
break;
case ID_PCB_MODULE_BUTT:
scanList = GENERAL_COLLECTOR::Modules;
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
scanList = GENERAL_COLLECTOR::Zones;
break;
default:
scanList = displ_opts->m_DisplayZonesMode == 0 ?
GENERAL_COLLECTOR::AllBoardItems :
GENERAL_COLLECTOR::AllButZones;
}
}
m_Collector->Collect( m_Pcb, scanList, RefPos( true ), guide );
#if 0
// debugging: print out the collected items, showing their priority order too.
for( int i = 0; i<m_Collector->GetCount(); ++i )
(*m_Collector)[i]->Show( 0, std::cout );
#endif
/* Remove redundancies: sometime, legacy zones are found twice,
* because zones can be filled by overlapping segments (this is a fill option)
* Trigger the selection of the current edge for new-style zones
*/
time_t timestampzone = 0;
for( int ii = 0; ii < m_Collector->GetCount(); ii++ )
{
item = (*m_Collector)[ii];
switch( item->Type() )
{
case PCB_ZONE_T:
// Found a TYPE ZONE
if( item->GetTimeStamp() == timestampzone ) // Remove it, redundant, zone already found
{
m_Collector->Remove( ii );
ii--;
}
else
{
timestampzone = item->GetTimeStamp();
}
break;
case PCB_ZONE_AREA_T:
{
/* We need to do the selection now because the menu text
* depends on it */
ZONE_CONTAINER *zone = static_cast<ZONE_CONTAINER*>( item );
zone->SetSelectedCorner( RefPos( true ) );
}
break;
default:
break;
}
}
if( m_Collector->GetCount() <= 1 )
{
item = (*m_Collector)[0];
SetCurItem( item );
}
// If the count is 2, and first item is a pad or module text, and the 2nd item is its
// parent module:
else if( m_Collector->GetCount() == 2
&& ( (*m_Collector)[0]->Type() == PCB_PAD_T || (*m_Collector)[0]->Type() ==
PCB_MODULE_TEXT_T )
&& (*m_Collector)[1]->Type() == PCB_MODULE_T && (*m_Collector)[0]->GetParent()==
(*m_Collector)[1] )
{
item = (*m_Collector)[0];
SetCurItem( item );
}
// if all are modules, find the smallest one among the primary choices
else if( ( item = AllAreModulesAndReturnSmallestIfSo( m_Collector ) ) != NULL )
{
SetCurItem( item );
}
else // we can't figure out which item user wants, do popup menu so user can choose
{
wxMenu itemMenu;
// Give a title to the selection menu. This is also a cancel menu item
wxMenuItem * item_title = new wxMenuItem( &itemMenu, -1, _( "Selection Clarification" ) );
#ifdef __WINDOWS__
wxFont bold_font( *wxNORMAL_FONT );
bold_font.SetWeight( wxFONTWEIGHT_BOLD );
bold_font.SetStyle( wxFONTSTYLE_ITALIC );
item_title->SetFont( bold_font );
#endif
itemMenu.Append( item_title );
itemMenu.AppendSeparator();
int limit = std::min( MAX_ITEMS_IN_PICKER, m_Collector->GetCount() );
for( int i = 0; i<limit; ++i )
{
wxString text;
item = (*m_Collector)[i];
text = item->GetSelectMenuText();
BITMAP_DEF xpm = item->GetMenuImage();
AddMenuItem( &itemMenu, ID_POPUP_PCB_ITEM_SELECTION_START + i, text, KiBitmap( xpm ) );
}
/* @todo: rather than assignment to true, these should be increment and decrement
* operators throughout _everywhere_.
* That way we can handle nesting.
* But I tried that and found there cases where the assignment to true (converted to
* a m_IgnoreMouseEvents++ )
* was not balanced with the -- (now m_IgnoreMouseEvents=false), so I had to revert.
* Somebody should track down these and make them balanced.
* m_canvas->SetIgnoreMouseEvents( true );
*/
// this menu's handler is void PCB_BASE_FRAME::ProcessItemSelection()
// and it calls SetCurItem() which in turn calls DisplayInfo() on the item.
m_canvas->SetAbortRequest( true ); // changed in false if an item is selected
PopupMenu( &itemMenu );
m_canvas->MoveCursorToCrossHair();
// The function ProcessItemSelection() has set the current item, return it.
if( m_canvas->GetAbortRequest() ) // Nothing selected
item = NULL;
else
item = GetCurItem();
}
return item;
}
bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotkeyCode == 0 )
return false;
bool itemCurrentlyEdited = GetCurItem() && GetCurItem()->GetFlags();
MODULE* module = NULL;
int evt_type = 0; //Used to post a wxCommandEvent on demand
PCB_SCREEN* screen = GetScreen();
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
/* Convert lower to upper case
* (the usual toupper function has problem with non ascii codes like function keys
*/
if( (aHotkeyCode >= 'a') && (aHotkeyCode <= 'z') )
aHotkeyCode += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, board_edit_Hotkey_List );
if( HK_Descr == NULL )
return false;
int hk_id = HK_Descr->m_Idcommand;
// Create a wxCommandEvent that will be posted in some hot keys functions
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
LAYER_NUM ll;
switch( hk_id )
{
default:
case HK_NOT_FOUND:
return false;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_SWITCH_TRACK_WIDTH_TO_NEXT:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() < GetDesignSettings().m_TrackWidthList.size() - 1 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() + 1 );
else
GetDesignSettings().SetTrackWidthIndex( 0 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_TRACK_WIDTH_TO_PREVIOUS:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() <= 0 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().m_TrackWidthList.size() -1 );
else
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() - 1 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_GRID_TO_FASTGRID1:
SetFastGrid1();
break;
case HK_SWITCH_GRID_TO_FASTGRID2:
SetFastGrid2();
break;
case HK_SWITCH_GRID_TO_NEXT:
evt_type = ID_POPUP_GRID_NEXT;
break;
case HK_SWITCH_GRID_TO_PREVIOUS:
evt_type = ID_POPUP_GRID_PREV;
break;
case HK_SWITCH_LAYER_TO_PREVIOUS:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == F_Cu )
ll = B_Cu;
else if( ll == B_Cu )
ll = ToLAYER_ID( GetBoard()->GetCopperLayerCount() - 2 );
else
ll = ll - 1;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_NEXT:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == B_Cu )
ll = F_Cu;
else if( ++ll >= GetBoard()->GetCopperLayerCount() - 1 )
ll = B_Cu;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_COMPONENT:
SwitchLayer( aDC, F_Cu );
break;
case HK_SWITCH_LAYER_TO_COPPER:
SwitchLayer( aDC, B_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER1:
SwitchLayer( aDC, In1_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER2:
SwitchLayer( aDC, In2_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER3:
SwitchLayer( aDC, In3_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER4:
SwitchLayer( aDC, In4_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER5:
SwitchLayer( aDC, In5_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER6:
SwitchLayer( aDC, In6_Cu );
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Board_Editor_Hotkeys_Descr );
break;
case HK_PREFERENCES:
evt_type = wxID_PREFERENCES;
break;
case HK_ZOOM_IN:
evt_type = ID_KEY_ZOOM_IN;
break;
case HK_ZOOM_OUT:
evt_type = ID_KEY_ZOOM_OUT;
break;
case HK_ZOOM_REDRAW:
evt_type = ID_ZOOM_REDRAW;
break;
case HK_ZOOM_AUTO:
evt_type = ID_ZOOM_PAGE;
break;
case HK_ZOOM_CENTER:
evt_type = ID_POPUP_ZOOM_CENTER;
break;
case HK_ZOOM_SELECTION:
evt_type = ID_ZOOM_SELECTION;
break;
case HK_ADD_MODULE:
evt_type = ID_PCB_MODULE_BUTT;
break;
case HK_UNDO:
case HK_REDO:
if( !itemCurrentlyEdited )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_RESET_LOCAL_COORD: // Set the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_SET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
GetCrossHairPosition() );
m_canvas->Refresh();
break;
case HK_RESET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
wxPoint( 0, 0 ) );
m_canvas->Refresh();
break;
case HK_SWITCH_UNITS:
evt_type = (GetUserUnits() == INCHES) ?
ID_TB_OPTIONS_SELECT_UNIT_MM : ID_TB_OPTIONS_SELECT_UNIT_INCH;
break;
case HK_SWITCH_TRACK_DISPLAY_MODE:
displ_opts->m_DisplayPcbTrackFill = !displ_opts->m_DisplayPcbTrackFill;
m_canvas->Refresh();
break;
case HK_DELETE:
OnHotkeyDeleteItem( aDC );
break;
case HK_BACK_SPACE:
if( IsCopperLayer( GetActiveLayer() ) )
{
if( !itemCurrentlyEdited )
{
// no track is currently being edited - select a segment and remove it.
// @todo: possibly? pass the HK command code to PcbGeneralLocateAndDisplay()
// so it can restrict its search to specific item types.
BOARD_ITEM * item = PcbGeneralLocateAndDisplay();
// don't let backspace delete modules!!
if( item && item->IsTrack() )
{
Delete_Segment( aDC, (TRACK*) item );
SetCurItem( NULL );
}
OnModify();
}
else if( GetCurItem()->IsTrack() )
{
// then an element is being edited - remove the last segment.
// simple lines for debugger:
TRACK* track = (TRACK*) GetCurItem();
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
}
}
break;
case HK_GET_AND_MOVE_FOOTPRINT:
if( !itemCurrentlyEdited )
evt_type = ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST;
break;
case HK_FIND_ITEM:
if( !itemCurrentlyEdited )
evt_type = ID_FIND_ITEMS;
break;
case HK_OPEN:
if( !itemCurrentlyEdited )
evt_type = ID_LOAD_FILE ;
break;
case HK_SAVE:
if( !itemCurrentlyEdited )
evt_type = ID_SAVE_BOARD;
break;
case HK_ADD_MICROVIA: // Place a micro via if a track is in progress
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( !itemCurrentlyEdited ) // no track in progress: nothing to do
break;
if( GetCurItem()->Type() != PCB_TRACE_T ) // Should not occur
return true;
if( !GetCurItem()->IsNew() )
return true;
// place micro via and switch layer
if( IsMicroViaAcceptable() )
evt_type = ID_POPUP_PCB_PLACE_MICROVIA;
break;
case HK_ADD_BLIND_BURIED_VIA:
case HK_ADD_THROUGH_VIA: // Switch to alternate layer and Place a via if a track is in progress
if( GetBoard()->GetDesignSettings().m_BlindBuriedViaAllowed &&
hk_id == HK_ADD_BLIND_BURIED_VIA )
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_BLIND_BURIED;
else
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_THROUGH;
if( !itemCurrentlyEdited ) // no track in progress: switch layer only
{
Other_Layer_Route( NULL, aDC );
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
break;
}
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( GetCurItem()->Type() != PCB_TRACE_T )
return true;
if( !GetCurItem()->IsNew() )
return true;
evt_type = hk_id == HK_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA : ID_POPUP_PCB_PLACE_THROUGH_VIA;
break;
case HK_SEL_LAYER_AND_ADD_THROUGH_VIA:
case HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA:
if( GetCurItem() == NULL || !GetCurItem()->IsNew() ||
GetCurItem()->Type() != PCB_TRACE_T )
break;
evt_type = hk_id == HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA :
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA;
break;
case HK_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
*/
evt_type = ID_POPUP_PCB_SWITCH_TRACK_POSTURE ;
break;
case HK_DRAG_TRACK_KEEP_SLOPE:
OnHotkeyMoveItem( HK_DRAG_TRACK_KEEP_SLOPE );
break;
case HK_PLACE_ITEM:
OnHotkeyPlaceItem( aDC );
break;
case HK_ADD_NEW_TRACK: // Start new track, if possible
OnHotkeyBeginRoute( aDC );
break;
case HK_EDIT_ITEM: // Edit board item
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_EDIT_MODULE_WITH_MODEDIT: // Edit module with module editor
OnHotkeyEditItem( HK_EDIT_MODULE_WITH_MODEDIT );
break;
case HK_LOCK_UNLOCK_FOOTPRINT: // toggle module "MODULE_is_LOCKED" status:
// get any module, locked or not locked and toggle its locked status
if( !itemCurrentlyEdited )
{
wxPoint pos = RefPos( true );
module = GetBoard()->GetFootprint( pos, screen->m_Active_Layer, true );
}
else if( GetCurItem()->Type() == PCB_MODULE_T )
{
module = (MODULE*) GetCurItem();
}
if( module )
{
SetCurItem( module );
module->SetLocked( !module->IsLocked() );
OnModify();
SetMsgPanel( module );
}
break;
case HK_DRAG_ITEM: // Start drag module or track segment
OnHotkeyMoveItem( HK_DRAG_ITEM );
break;
case HK_MOVE_ITEM: // Start move item
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_COPY_ITEM:
evt_type = OnHotkeyCopyItem();
break;
case HK_ROTATE_ITEM: // Rotation
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
case HK_FLIP_ITEM:
OnHotkeyFlipItem( HK_FLIP_ITEM );
break;
case HK_MOVE_ITEM_EXACT:
case HK_DUPLICATE_ITEM:
case HK_DUPLICATE_ITEM_AND_INCREMENT:
case HK_CREATE_ARRAY:
OnHotkeyDuplicateOrArrayItem( HK_Descr->m_Idcommand );
break;
case HK_SWITCH_HIGHCONTRAST_MODE: // switch to high contrast mode and refresh the canvas
displ_opts->m_ContrastModeDisplay = !displ_opts->m_ContrastModeDisplay;
m_canvas->Refresh();
break;
case HK_CANVAS_CAIRO:
evt_type = ID_MENU_CANVAS_CAIRO;
break;
case HK_CANVAS_OPENGL:
evt_type = ID_MENU_CANVAS_OPENGL;
break;
case HK_CANVAS_LEGACY:
evt_type = ID_MENU_CANVAS_LEGACY;
break;
case HK_ZONE_FILL_OR_REFILL:
evt_type = ID_POPUP_PCB_FILL_ALL_ZONES;
break;
case HK_ZONE_REMOVE_FILLED:
evt_type = ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES;
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
}
return true;
}
FOOTPRINT_WIZARD_FRAME::FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway,
wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Wizard" ),
wxDefaultPosition, wxDefaultSize,
aParent ? KICAD_DEFAULT_DRAWFRAME_STYLE | MODAL_MODE_EXTRASTYLE
: KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP,
FOOTPRINT_WIZARD_FRAME_NAME )
{
wxASSERT( aFrameType == FRAME_PCB_FOOTPRINT_WIZARD_MODAL );
// This frame is always show modal:
SetModal( true );
m_messagesFrame = NULL; // This windows will be created the first time a wizard is loaded
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( module_wizard_xpm) );
SetIcon( icon );
m_hotkeysDescrList = g_Module_Viewer_Hokeys_Descr;
m_wizardName.Empty();
SetBoard( new BOARD() );
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
GetScreen()->m_Center = true; // Center coordinate origins on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
// Set some display options here, because the FOOTPRINT_WIZARD_FRAME
// does not have a config menu to do that:
DISPLAY_OPTIONS* disp_opts = (DISPLAY_OPTIONS*) GetDisplayOptions();
disp_opts->m_DisplayPadIsol = false;
disp_opts->m_DisplayPadNum = true;
GetBoard()->SetElementVisibility( PCB_VISIBLE(NO_CONNECTS_VISIBLE), false );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
ReCreateHToolbar();
ReCreateVToolbar();
// Creates the parameter pages list
m_pageList = new wxListBox( this, ID_FOOTPRINT_WIZARD_PAGE_LIST,
wxDefaultPosition, wxDefaultSize,
0, NULL, wxLB_HSCROLL );
// Creates the The list of parameters for the current parameter page
initParameterGrid();
ReCreatePageList();
DisplayWizardInfos();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiztb;
horiztb.HorizontalToolbarPane();
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbal
m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiztb ).
Name( wxT ("m_mainToolBar" ) ).Top().Row( 0 ) );
// Manage the left window (list of parameter pages)
EDA_PANEINFO paneList;
paneList.InfoToolbarPane().Name( wxT( "m_pageList" ) ).Left().Row( 0 );
m_auimgr.AddPane( m_pageList, wxAuiPaneInfo( paneList ) );
// Manage the parameters grid editor for the current parameter page
EDA_PANEINFO panePrms;
panePrms.InfoToolbarPane().Name( wxT( "m_parameterGrid" ) ).Left().Row( 1 );
m_auimgr.AddPane( m_parameterGrid, wxAuiPaneInfo( panePrms ) );
// Manage the draw panel
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
// Manage the message panel
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(1) );
// Gives a min size and the last saved size to left windows
m_auimgr.GetPane( m_pageList ).MinSize( wxSize(60, -1 ) );
m_auimgr.GetPane( m_pageList ).BestSize( wxSize(m_pageListWidth, -1) );
m_auimgr.GetPane( m_parameterGrid ).MinSize( wxSize( 120, -1 ) );
m_auimgr.GetPane( m_parameterGrid ).BestSize( wxSize(m_parameterGridWidth, -1) );
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
// Do not Run a dialog here: on some Window Managers, it creates issues.
// Reason: the FOOTPRINT_WIZARD_FRAME is run as modal;
// It means the call to FOOTPRINT_WIZARD_FRAME::ShowModal will change the
// Event Loop Manager, and stop the one created by the dialog.
// It does not happen on all W.M., perhaps due to the way the order events are called
// SelectFootprintWizard();
}
