VIA* TRACK::GetVia( TRACK* aEndTrace, const wxPoint& aPosition, LAYER_MSK aLayerMask )
{
for( VIA *via = GetFirstVia( this, aEndTrace ); via; via = GetFirstVia( via->Next() ) )
{
if( via->HitTest( aPosition ) &&
!via->GetState( BUSY | IS_DELETED ) &&
(aLayerMask & via->GetLayerMask()) )
return via;
}
return NULL;
}
VIA* TRACK::GetVia( const wxPoint& aPosition, LAYER_NUM aLayer)
{
for( VIA *via = GetFirstVia( this ); via; via = GetFirstVia( via->Next() ) )
{
if( via->HitTest( aPosition ) &&
!via->GetState( BUSY | IS_DELETED ) &&
((aLayer == UNDEFINED_LAYER) || (via->IsOnLayer( aLayer ))) )
return via;
}
return NULL;
}
bool TRACKS_CLEANER::clean_vias()
{
bool modified = false;
for( VIA* via = GetFirstVia( m_Brd->m_Track ); via != NULL;
via = GetFirstVia( via->Next() ) )
{
// Correct via m_End defects (if any), should never happen
if( via->GetStart() != via->GetEnd() )
{
wxFAIL_MSG( wxT( "Via with mismatching ends" ) );
via->SetEnd( via->GetStart() );
}
/* Important: these cleanups only do thru hole vias, they don't
* (yet) handle high density interconnects */
if( via->GetViaType() != VIA_THROUGH )
{
modified |= remove_duplicates_of_via( via );
/* To delete through Via on THT pads at same location
* Examine the list of connected pads:
* if one through pad is found, the via can be removed */
for( unsigned ii = 0; ii < via->m_PadsConnected.size(); ++ii )
{
const D_PAD *pad = via->m_PadsConnected[ii];
const LSET all_cu = LSET::AllCuMask();
if( (pad->GetLayerSet() & all_cu) == all_cu )
{
// redundant: delete the via
m_Brd->GetRatsnest()->Remove( via );
via->ViewRelease();
via->DeleteStructure();
modified = true;
break;
}
}
}
}
return modified;
}
bool TRACKS_CLEANER::remove_duplicates_of_via( const VIA *aVia )
{
bool modified = false;
// Search and delete others vias at same location
VIA* next_via;
for( VIA* alt_via = GetFirstVia( aVia->Next() ); alt_via != NULL;
alt_via = next_via )
{
next_via = GetFirstVia( alt_via->Next() );
if( (alt_via->GetViaType() == VIA_THROUGH) &&
(alt_via->GetStart() == aVia->GetStart()) )
{
// delete via
m_Brd->GetRatsnest()->Remove( alt_via );
alt_via->ViewRelease();
alt_via->DeleteStructure();
modified = true;
}
}
return modified;
}
void EXCELLON_WRITER::BuildHolesList( LAYER_PAIR aLayerPair,
bool aGenerateNPTH_list )
{
HOLE_INFO new_hole;
m_holeListBuffer.clear();
m_toolListBuffer.clear();
wxASSERT( aLayerPair.first < aLayerPair.second ); // fix the caller
// build hole list for vias
if( ! aGenerateNPTH_list ) // vias are always plated !
{
for( VIA* via = GetFirstVia( m_pcb->m_Track ); via; via = GetFirstVia( via->Next() ) )
{
int hole_sz = via->GetDrillValue();
if( hole_sz == 0 ) // Should not occur.
continue;
new_hole.m_Tool_Reference = -1; // Flag value for Not initialized
new_hole.m_Hole_Orient = 0;
new_hole.m_Hole_Diameter = hole_sz;
new_hole.m_Hole_NotPlated = false;
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Pos = via->GetStart();
via->LayerPair( &new_hole.m_Hole_Top_Layer, &new_hole.m_Hole_Bottom_Layer );
// LayerPair() returns params with m_Hole_Bottom_Layer > m_Hole_Top_Layer
// Remember: top layer = 0 and bottom layer = 31 for through hole vias
// Any captured via should be from aLayerPair.first to aLayerPair.second exactly.
if( new_hole.m_Hole_Top_Layer != aLayerPair.first ||
new_hole.m_Hole_Bottom_Layer != aLayerPair.second )
continue;
m_holeListBuffer.push_back( new_hole );
}
}
if( aLayerPair == LAYER_PAIR( F_Cu, B_Cu ) )
{
// add holes for thru hole pads
for( MODULE* module = m_pcb->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( !m_merge_PTH_NPTH )
{
if( !aGenerateNPTH_list && pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED )
continue;
if( aGenerateNPTH_list && pad->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED )
continue;
}
if( pad->GetDrillSize().x == 0 )
continue;
new_hole.m_Hole_NotPlated = (pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED);
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->GetOrientation();
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = std::min( pad->GetDrillSize().x, pad->GetDrillSize().y );
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
if( pad->GetDrillShape() != PAD_DRILL_SHAPE_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_Size = pad->GetDrillSize();
new_hole.m_Hole_Pos = pad->GetPosition(); // hole position
new_hole.m_Hole_Bottom_Layer = B_Cu;
new_hole.m_Hole_Top_Layer = F_Cu; // pad holes are through holes
m_holeListBuffer.push_back( new_hole );
}
}
}
// Sort holes per increasing diameter value
sort( m_holeListBuffer.begin(), m_holeListBuffer.end(), CmpHoleSettings );
// build the tool list
int last_hole = -1; // Set to not initialized (this is a value not used
// for m_holeListBuffer[ii].m_Hole_Diameter)
bool last_notplated_opt = false;
DRILL_TOOL new_tool( 0, false );
unsigned jj;
for( unsigned ii = 0; ii < m_holeListBuffer.size(); ii++ )
{
if( m_holeListBuffer[ii].m_Hole_Diameter != last_hole ||
m_holeListBuffer[ii].m_Hole_NotPlated != last_notplated_opt )
{
new_tool.m_Diameter = m_holeListBuffer[ii].m_Hole_Diameter;
new_tool.m_Hole_NotPlated = m_holeListBuffer[ii].m_Hole_NotPlated;
m_toolListBuffer.push_back( new_tool );
last_hole = new_tool.m_Diameter;
last_notplated_opt = new_tool.m_Hole_NotPlated;
}
jj = m_toolListBuffer.size();
if( jj == 0 )
continue; // Should not occurs
m_holeListBuffer[ii].m_Tool_Reference = jj; // Tool value Initialized (value >= 1)
m_toolListBuffer.back().m_TotalCount++;
if( m_holeListBuffer[ii].m_Hole_Shape )
m_toolListBuffer.back().m_OvalCount++;
}
}
void EXCELLON_WRITER::BuildHolesList( int aFirstLayer,
int aLastLayer,
bool aExcludeThroughHoles,
bool aGenerateNPTH_list,
bool aMerge_PTH_NPTH )
{
HOLE_INFO new_hole;
int hole_value;
m_holeListBuffer.clear();
m_toolListBuffer.clear();
if( (aFirstLayer >= 0) && (aLastLayer >= 0) )
{
if( aFirstLayer > aLastLayer )
std::swap( aFirstLayer, aLastLayer );
}
if ( aGenerateNPTH_list && aMerge_PTH_NPTH )
{
return;
}
// build hole list for vias
if( ! aGenerateNPTH_list ) // vias are always plated !
{
for( VIA* via = GetFirstVia( m_pcb->m_Track ); via; via = GetFirstVia( via->Next() ) )
{
hole_value = via->GetDrillValue();
if( hole_value == 0 ) // Should not occur.
continue;
new_hole.m_Tool_Reference = -1; // Flag value for Not initialized
new_hole.m_Hole_Orient = 0;
new_hole.m_Hole_Diameter = hole_value;
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Pos = via->GetStart();
via->LayerPair( &new_hole.m_Hole_Top_Layer, &new_hole.m_Hole_Bottom_Layer );
// LayerPair return params with m_Hole_Bottom_Layer > m_Hole_Top_Layer
// Remember: top layer = 0 and bottom layer = 31 for through hole vias
// the via should be at least from aFirstLayer to aLastLayer
if( (new_hole.m_Hole_Top_Layer > aFirstLayer) && (aFirstLayer >= 0) )
continue; // via above the first layer
if( (new_hole.m_Hole_Bottom_Layer < aLastLayer) && (aLastLayer >= 0) )
continue; // via below the last layer
if( aExcludeThroughHoles && (new_hole.m_Hole_Bottom_Layer == B_Cu)
&& (new_hole.m_Hole_Top_Layer == F_Cu) )
continue;
m_holeListBuffer.push_back( new_hole );
}
}
// build hole list for pads (assumed always through holes)
if( !aExcludeThroughHoles || aGenerateNPTH_list )
{
for( MODULE* module = m_pcb->m_Modules; module; module = module->Next() )
{
// Read and analyse pads
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( ! aGenerateNPTH_list &&
pad->GetAttribute() == PAD_HOLE_NOT_PLATED &&
! aMerge_PTH_NPTH )
continue;
if( aGenerateNPTH_list && pad->GetAttribute() != PAD_HOLE_NOT_PLATED )
continue;
if( pad->GetDrillSize().x == 0 )
continue;
new_hole.m_Hole_NotPlated = (pad->GetAttribute() == PAD_HOLE_NOT_PLATED);
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->GetOrientation();
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = std::min( pad->GetDrillSize().x, pad->GetDrillSize().y );
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
if( pad->GetDrillShape() != PAD_DRILL_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_Size = pad->GetDrillSize();
new_hole.m_Hole_Pos = pad->GetPosition(); // hole position
new_hole.m_Hole_Bottom_Layer = B_Cu;
new_hole.m_Hole_Top_Layer = F_Cu;// pad holes are through holes
m_holeListBuffer.push_back( new_hole );
}
}
}
// Sort holes per increasing diameter value
sort( m_holeListBuffer.begin(), m_holeListBuffer.end(), CmpHoleDiameterValue );
// build the tool list
int LastHole = -1; /* Set to not initialized (this is a value not used
* for m_holeListBuffer[ii].m_Hole_Diameter) */
DRILL_TOOL new_tool( 0 );
unsigned jj;
for( unsigned ii = 0; ii < m_holeListBuffer.size(); ii++ )
{
if( m_holeListBuffer[ii].m_Hole_Diameter != LastHole )
{
new_tool.m_Diameter = ( m_holeListBuffer[ii].m_Hole_Diameter );
m_toolListBuffer.push_back( new_tool );
LastHole = new_tool.m_Diameter;
}
jj = m_toolListBuffer.size();
if( jj == 0 )
continue; // Should not occurs
m_holeListBuffer[ii].m_Tool_Reference = jj; // Tool value Initialized (value >= 1)
m_toolListBuffer.back().m_TotalCount++;
if( m_holeListBuffer[ii].m_Hole_Shape )
m_toolListBuffer.back().m_OvalCount++;
}
}
// Emit PADS and PADSTACKS. They are sorted and emitted uniquely.
// Via name is synthesized from their attributes, pads are numbered
static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
{
std::vector<D_PAD*> pads;
std::vector<D_PAD*> padstacks;
std::vector<VIA*> vias;
std::vector<VIA*> viastacks;
padstacks.resize( 1 ); // We count pads from 1
// The master layermask (i.e. the enabled layers) for padstack generation
LSET master_layermask = aPcb->GetDesignSettings().GetEnabledLayers();
int cu_count = aPcb->GetCopperLayerCount();
fputs( "$PADS\n", aFile );
// Enumerate and sort the pads
if( aPcb->GetPadCount() > 0 )
{
pads = aPcb->GetPads();
qsort( &pads[0], aPcb->GetPadCount(), sizeof( D_PAD* ),
PadListSortByShape );
}
// The same for vias
for( VIA* via = GetFirstVia( aPcb->m_Track ); via;
via = GetFirstVia( via->Next() ) )
{
vias.push_back( via );
}
qsort( &vias[0], vias.size(), sizeof(VIA*), ViaSort );
// Emit vias pads
TRACK* old_via = 0;
for( unsigned i = 0; i < vias.size(); i++ )
{
VIA* via = vias[i];
if( old_via && 0 == ViaSort( &old_via, &via ) )
continue;
old_via = via;
viastacks.push_back( via );
fprintf( aFile, "PAD V%d.%d.%s ROUND %g\nCIRCLE 0 0 %g\n",
via->GetWidth(), via->GetDrillValue(),
fmt_mask( via->GetLayerSet() ).c_str(),
via->GetDrillValue() / SCALE_FACTOR,
via->GetWidth() / (SCALE_FACTOR * 2) );
}
// Emit component pads
D_PAD* old_pad = 0;
int pad_name_number = 0;
for( unsigned i = 0; i<pads.size(); ++i )
{
D_PAD* pad = pads[i];
pad->SetSubRatsnest( pad_name_number );
if( old_pad && 0==D_PAD::Compare( old_pad, pad ) )
continue; // already created
old_pad = pad;
pad_name_number++;
pad->SetSubRatsnest( pad_name_number );
fprintf( aFile, "PAD P%d", pad->GetSubRatsnest() );
padstacks.push_back( pad ); // Will have its own padstack later
int dx = pad->GetSize().x / 2;
int dy = pad->GetSize().y / 2;
switch( pad->GetShape() )
{
default:
case PAD_SHAPE_CIRCLE:
fprintf( aFile, " ROUND %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
/* Circle is center, radius */
fprintf( aFile, "CIRCLE %g %g %g\n",
pad->GetOffset().x / SCALE_FACTOR,
-pad->GetOffset().y / SCALE_FACTOR,
pad->GetSize().x / (SCALE_FACTOR * 2) );
break;
case PAD_SHAPE_RECT:
fprintf( aFile, " RECTANGULAR %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
// Rectangle is begin, size *not* begin, end!
fprintf( aFile, "RECTANGLE %g %g %g %g\n",
(-dx + pad->GetOffset().x ) / SCALE_FACTOR,
(-dy - pad->GetOffset().y ) / SCALE_FACTOR,
dx / (SCALE_FACTOR / 2), dy / (SCALE_FACTOR / 2) );
break;
case PAD_SHAPE_OVAL: // Create outline by 2 lines and 2 arcs
{
// OrCAD Layout call them OVAL or OBLONG - GenCAD call them FINGERs
fprintf( aFile, " FINGER %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
int dr = dx - dy;
if( dr >= 0 ) // Horizontal oval
{
int radius = dy;
fprintf( aFile, "LINE %g %g %g %g\n",
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR,
(dr + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR );
// GenCAD arcs are (start, end, center)
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR,
(dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR,
(dr + pad->GetOffset().x) / SCALE_FACTOR,
-pad->GetOffset().y / SCALE_FACTOR );
fprintf( aFile, "LINE %g %g %g %g\n",
(dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR,
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR );
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR,
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR,
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
-pad->GetOffset().y / SCALE_FACTOR );
}
else // Vertical oval
{
dr = -dr;
int radius = dx;
fprintf( aFile, "LINE %g %g %g %g\n",
(-radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR,
(-radius + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR );
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(-radius + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR,
(radius + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR,
pad->GetOffset().x / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR );
fprintf( aFile, "LINE %g %g %g %g\n",
(radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR,
(radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR );
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR,
(-radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR,
pad->GetOffset().x / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR );
}
}
break;
case PAD_SHAPE_TRAPEZOID:
fprintf( aFile, " POLYGON %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
// XXX TO BE IMPLEMENTED! and I don't know if it could be actually imported by something
break;
}
}
fputs( "\n$ENDPADS\n\n", aFile );
// Now emit the padstacks definitions, using the combined layer masks
fputs( "$PADSTACKS\n", aFile );
// Via padstacks
for( unsigned i = 0; i < viastacks.size(); i++ )
{
VIA* via = viastacks[i];
LSET mask = via->GetLayerSet() & master_layermask;
fprintf( aFile, "PADSTACK VIA%d.%d.%s %g\n",
via->GetWidth(), via->GetDrillValue(),
fmt_mask( mask ).c_str(),
via->GetDrillValue() / SCALE_FACTOR );
for( LSEQ seq = mask.Seq( gc_seq, DIM( gc_seq ) ); seq; ++seq )
{
LAYER_ID layer = *seq;
fprintf( aFile, "PAD V%d.%d.%s %s 0 0\n",
via->GetWidth(), via->GetDrillValue(),
fmt_mask( mask ).c_str(),
GenCADLayerName( cu_count, layer ).c_str()
);
}
}
/* Component padstacks
* CAM350 don't apply correctly the FLIP semantics for padstacks, i.e. doesn't
* swap the top and bottom layers... so I need to define the shape as MIRRORX
* and define a separate 'flipped' padstack... until it appears yet another
* noncompliant importer */
for( unsigned i = 1; i < padstacks.size(); i++ )
{
D_PAD* pad = padstacks[i];
// Straight padstack
fprintf( aFile, "PADSTACK PAD%u %g\n", i, pad->GetDrillSize().x / SCALE_FACTOR );
LSET pad_set = pad->GetLayerSet() & master_layermask;
// the special gc_seq
for( LSEQ seq = pad_set.Seq( gc_seq, DIM( gc_seq ) ); seq; ++seq )
{
LAYER_ID layer = *seq;
fprintf( aFile, "PAD P%u %s 0 0\n", i, GenCADLayerName( cu_count, layer ).c_str() );
}
// Flipped padstack
fprintf( aFile, "PADSTACK PAD%uF %g\n", i, pad->GetDrillSize().x / SCALE_FACTOR );
// the normal LAYER_ID sequence is inverted from gc_seq[]
for( LSEQ seq = pad_set.Seq(); seq; ++seq )
{
LAYER_ID layer = *seq;
fprintf( aFile, "PAD P%u %s 0 0\n", i, GenCADLayerNameFlipped( cu_count, layer ).c_str() );
}
}
fputs( "$ENDPADSTACKS\n\n", aFile );
}
