/*
* description:
* There are two mode to displsy decoded picture in VO:
* (1) bind mode.
* (2) user-send mode.
*
* To use bind mode, call HI_MPI_VDEC_BindOutput(). It is recommended.
* To use user-send mode, do as proc_recvPic() did. It is not recommended.
*
* remark:
* How to send pictures to VO is totally left to user in user-send mode.
* So it is more complicated, but also more flexible. User can do some
* special control in user-send mode.
*/
void* proc_recvPic(void* p)
{
HI_S32 s32ret;
while(1)
{
VDEC_DATA_S stVdecData;
s32ret = HI_MPI_VDEC_GetData(0, &stVdecData, HI_IO_BLOCK);
if (HI_SUCCESS == s32ret)
{
if(stVdecData.stFrameInfo.bValid)
{
HI_MPI_VO_SendFrame(0, &stVdecData.stFrameInfo.stVideoFrameInfo);
usleep(40000);
}
HI_MPI_VDEC_ReleaseData(0, &stVdecData);
}
}
return NULL;
}
HI_S32 SAMPLE_VIO_TDE_1Screen_VoVGA()
{
VB_CONF_S stVbConf = {0};
HI_S32 s32ViChnTotal = 1;
HI_S32 s32VoChnTotal = 1;
VO_DEV VoDev;
VO_CHN VoChn;
VI_DEV ViDev;
VI_CHN ViChn;
VI_PUB_ATTR_S stViDevAttr;
VI_CHN_ATTR_S stViChnAttr;
VO_PUB_ATTR_S stVoDevAttr;
VO_VIDEO_LAYER_ATTR_S stVideoLayerAttr;
VIDEO_FRAME_INFO_S stFrame;
HI_S32 s32Ret = HI_SUCCESS;
HI_S32 u32PhyAddr;
stVbConf.astCommPool[0].u32BlkSize = 704 * 576 * 2;
stVbConf.astCommPool[0].u32BlkCnt = 20;
stVbConf.astCommPool[1].u32BlkSize = 384 * 288 * 2;
stVbConf.astCommPool[1].u32BlkCnt = 20;
if (HI_SUCCESS != SAMPLE_InitMPP(&stVbConf))
{
return -1;
}
/* Config VI to input standard-definition video */
ViDev = 0;
SAMPLE_GetViCfg_SD(PIC_D1, &stViDevAttr, &stViChnAttr);
// SAMPLE_GetViCfg_SD(PIC_CIF, &stViDevAttr, &stViChnAttr);
s32Ret = SAMPLE_StartViByChn(s32ViChnTotal, &stViDevAttr, &stViChnAttr);
if (HI_SUCCESS != s32Ret)
{
return HI_FAILURE;
}
/* display VGA video on vo HD divice. */
VoDev = VO_DEV_HD;
SAMPLE_GetVoCfg_VGA_800x600(&stVoDevAttr, &stVideoLayerAttr);
s32Ret = SAMPLE_StartVo(s32VoChnTotal, VoDev, &stVoDevAttr, &stVideoLayerAttr);
if (HI_SUCCESS != s32Ret)
{
return HI_FAILURE;
}
printf("start VI to VO preview \n");
master_thread_init_ok = 1;
sleep(3);
/** 1. 打开TDE */
HI_TDE2_Open();
/** 2. 创建Y U V OSD surface */
g_stOsdYSurface.enColorFmt = TDE2_COLOR_FMT_ARGB1555;
g_stOsdYSurface.bYCbCrClut = 1;
g_stOsdYSurface.bAlphaMax255 = HI_TRUE;
g_stOsdYSurface.enColorSpaceConv = TDE2_ITU_R_BT601_VIDEO;
g_stOsdUSurface.enColorFmt = TDE2_COLOR_FMT_ARGB1555;
g_stOsdUSurface.bYCbCrClut = 0;
g_stOsdUSurface.bAlphaMax255 = HI_TRUE;
g_stOsdUSurface.enColorSpaceConv = TDE2_ITU_R_BT601_VIDEO;
g_stOsdVSurface.enColorFmt = TDE2_COLOR_FMT_ARGB1555;
g_stOsdVSurface.bYCbCrClut = 1;
g_stOsdVSurface.bAlphaMax255 = HI_TRUE;
g_stOsdVSurface.enColorSpaceConv = TDE2_ITU_R_BT601_VIDEO;
while(1)
{
TGT_SET_S *target_set = &gstPeaResult.stTargetSet;
EVT_SET_S *event_set = &gstPeaResult.stEventSet;
IMP_S32 s32TargetNum = target_set->s32TargetNum;
/** 获取图像 */
if (HI_MPI_VI_GetFrame(ViDev, 0, &stFrame))
{
printf("HI_MPI_VI_GetFrame err, vi(%d,%d)\n", ViDev, 0);
return -1;
}
if(s32TargetNum > 0 )
{
TDE_HANDLE s32Handle;
/* 3. 开始TDE任务 */
s32Handle = HI_TDE2_BeginJob();
if(HI_ERR_TDE_INVALID_HANDLE == s32Handle)
{
printf("start job failed!\n");
continue;
}
/** 4. 配置YUV Surface数据 长度、宽度、stride、物理地址等 */
u32PhyAddr = stFrame.stVFrame.u32PhyAddr[0];
g_stOsdYSurface.u32Width = stFrame.stVFrame.u32Width;
g_stOsdYSurface.u32Height = stFrame.stVFrame.u32Height;
g_stOsdYSurface.u32Stride = stFrame.stVFrame.u32Stride[0];
g_stOsdYSurface.u32PhyAddr = u32PhyAddr;
g_stOsdUSurface.u32Width = stFrame.stVFrame.u32Width>>1;
g_stOsdUSurface.u32Height = stFrame.stVFrame.u32Height>>1;
g_stOsdUSurface.u32Stride = stFrame.stVFrame.u32Stride[1];
g_stOsdUSurface.u32PhyAddr = stFrame.stVFrame.u32PhyAddr[1]+1;
g_stOsdVSurface = g_stOsdUSurface;
g_stOsdVSurface.u32PhyAddr = stFrame.stVFrame.u32PhyAddr[1];
/** 5. 通过TDE绘制修改YUV数据显示PEA数据结果 TDE只支持绘制矩形区域、直线等*/
IMP_TDE_DrawPeaResult( s32Handle, &g_stOsdYSurface,&g_stOsdVSurface, &gstPeaResult,IMP_D1,IMP_QCIF );
/** 6. 直接修改YUV数据显示PEA数据结果 绘制轨迹线、用户配置的规则信息等*/
IMP_DrawPeaResult( &stFrame.stVFrame, &gstPeaResult,IMP_D1,IMP_QCIF );
/** 7. 结束TDE任务 */
s32Ret = HI_TDE2_EndJob(s32Handle, HI_FALSE, HI_TRUE, 10);
if(s32Ret < 0)
{
printf("Line:%d,HI_TDE2_EndJob failed,ret=0x%x!\n", __LINE__, s32Ret);
HI_TDE2_CancelJob(s32Handle);
return ;
}
}
/** 8. 将修改后的YUV数据送给VO设备 */
HI_MPI_VO_SendFrame( VoDev,0,&stFrame);
/** 9. 释放图像 */
HI_MPI_VI_ReleaseFrame(ViDev, 0, &stFrame);
}
