VOID
NTAPI
INIT_FUNCTION
HalpInitializePciStubs(VOID)
{
PPCI_REGISTRY_INFO_INTERNAL PciRegistryInfo;
UCHAR PciType;
PPCIPBUSDATA BusData = (PPCIPBUSDATA)HalpFakePciBusHandler.BusData;
ULONG i;
PCI_SLOT_NUMBER j;
ULONG VendorId = 0;
ULONG MaxPciBusNumber;
/* Query registry information */
PciRegistryInfo = HalpQueryPciRegistryInfo();
if (!PciRegistryInfo)
{
/* Assume type 1 */
PciType = 1;
/* Force a manual bus scan later */
MaxPciBusNumber = MAXULONG;
}
else
{
/* Get the PCI type */
PciType = PciRegistryInfo->HardwareMechanism & 0xF;
/* Get MaxPciBusNumber and make it 0-based */
MaxPciBusNumber = PciRegistryInfo->NoBuses - 1;
/* Free the info structure */
ExFreePoolWithTag(PciRegistryInfo, TAG_HAL);
}
/* Initialize the PCI lock */
KeInitializeSpinLock(&HalpPCIConfigLock);
/* Check the type of PCI bus */
switch (PciType)
{
/* Type 1 PCI Bus */
case 1:
/* Copy the Type 1 handler data */
RtlCopyMemory(&PCIConfigHandler,
&PCIConfigHandlerType1,
sizeof(PCIConfigHandler));
/* Set correct I/O Ports */
BusData->Config.Type1.Address = PCI_TYPE1_ADDRESS_PORT;
BusData->Config.Type1.Data = PCI_TYPE1_DATA_PORT;
break;
/* Type 2 PCI Bus */
case 2:
/* Copy the Type 2 handler data */
RtlCopyMemory(&PCIConfigHandler,
&PCIConfigHandlerType2,
sizeof (PCIConfigHandler));
/* Set correct I/O Ports */
BusData->Config.Type2.CSE = PCI_TYPE2_CSE_PORT;
BusData->Config.Type2.Forward = PCI_TYPE2_FORWARD_PORT;
BusData->Config.Type2.Base = PCI_TYPE2_ADDRESS_BASE;
/* Only 16 devices supported, not 32 */
BusData->MaxDevice = 16;
break;
default:
/* Invalid type */
DbgPrint("HAL: Unknown PCI type\n");
}
/* Run a forced bus scan if needed */
if (MaxPciBusNumber == MAXULONG)
{
/* Initialize the max bus number to 0xFF */
HalpMaxPciBus = 0xFF;
/* Initialize the counter */
MaxPciBusNumber = 0;
/* Loop all possible buses */
for (i = 0; i < HalpMaxPciBus; i++)
{
/* Loop all devices */
for (j.u.AsULONG = 0; j.u.AsULONG < BusData->MaxDevice; j.u.AsULONG++)
{
/* Query the interface */
if (HaliPciInterfaceReadConfig(NULL,
i,
j,
&VendorId,
0,
sizeof(ULONG)))
{
/* Validate the vendor ID */
if ((VendorId & 0xFFFF) != PCI_INVALID_VENDORID)
{
/* Set this as the maximum ID */
MaxPciBusNumber = i;
break;
}
}
}
}
}
/* Set the real max bus number */
HalpMaxPciBus = MaxPciBusNumber;
/* We're done */
HalpPCIConfigInitialized = TRUE;
}
INIT_FUNCTION
VOID
NTAPI
HalpInitializePciBus(VOID)
{
#ifndef _MINIHAL_
PPCI_REGISTRY_INFO_INTERNAL PciRegistryInfo;
UCHAR PciType;
PCI_SLOT_NUMBER PciSlot;
ULONG i, j, k;
UCHAR DataBuffer[PCI_COMMON_HDR_LENGTH];
PPCI_COMMON_CONFIG PciData = (PPCI_COMMON_CONFIG)DataBuffer;
PBUS_HANDLER BusHandler;
ULONG HackFlags;
BOOLEAN ExtendedAddressDecoding = FALSE;
NTSTATUS Status;
/* Query registry information */
PciRegistryInfo = HalpQueryPciRegistryInfo();
if (!PciRegistryInfo) return;
/* Initialize the PCI configuration lock */
KeInitializeSpinLock(&HalpPCIConfigLock);
/* Get the type and free the info structure */
PciType = PciRegistryInfo->HardwareMechanism & 0xF;
/* Check if this is a type 2 PCI bus with at least one bus */
if ((PciRegistryInfo->NoBuses) && (PciType == 2))
{
/* Setup the PCI slot */
PciSlot.u.bits.Reserved = 0;
PciSlot.u.bits.FunctionNumber = 0;
/* Loop all slots */
for (i = 0; i < 32; i++)
{
/* Try to setup a Type 2 PCI slot */
PciType = 2;
BusHandler = HalpAllocateAndInitPciBusHandler(2, 0, TRUE);
if (!BusHandler) break;
/* Now check if it's valid */
if (HalpIsValidPCIDevice(BusHandler, PciSlot)) break;
/* Heh, the BIOS lied... try Type 1 */
PciType = 1;
BusHandler = HalpAllocateAndInitPciBusHandler(1, 0, TRUE);
if (!BusHandler) break;
/* Now check if it's valid */
if (HalpIsValidPCIDevice(BusHandler, PciSlot)) break;
/* Keep trying */
PciType = 2;
}
/* Now allocate the correct kind of handler */
HalpAllocateAndInitPciBusHandler(PciType, 0, FALSE);
}
/* Okay, now loop all PCI bridges */
do
{
/* Loop all PCI buses */
for (i = 0; i < PciRegistryInfo->NoBuses; i++)
{
/* Check if we have a handler for it */
if (!HalHandlerForBus(PCIBus, i))
{
/* Allocate it */
HalpAllocateAndInitPciBusHandler(PciType, i, FALSE);
}
}
/* Go to the next bridge */
} while (HalpGetPciBridgeConfig(PciType, &PciRegistryInfo->NoBuses));
/* Now build correct address range informaiton */
HalpFixupPciSupportedRanges(PciRegistryInfo->NoBuses);
/* Loop every bus */
DbgPrint("\n====== PCI BUS HARDWARE DETECTION =======\n\n");
PciSlot.u.bits.Reserved = 0;
for (i = 0; i < PciRegistryInfo->NoBuses; i++)
{
/* Get the bus handler */
BusHandler = HalHandlerForBus(PCIBus, i);
/* Loop every device */
for (j = 0; j < 32; j++)
{
/* Loop every function */
PciSlot.u.bits.DeviceNumber = j;
for (k = 0; k < 8; k++)
{
/* Build the final slot structure */
PciSlot.u.bits.FunctionNumber = k;
/* Read the configuration information */
HalpReadPCIConfig(BusHandler,
PciSlot,
PciData,
0,
PCI_COMMON_HDR_LENGTH);
/* Skip if this is an invalid function */
if (PciData->VendorID == PCI_INVALID_VENDORID) continue;
/* Print out the entry */
HalpDebugPciDumpBus(i, j, k, PciData);
/* Check if this is a Cardbus bridge */
if (PCI_CONFIGURATION_TYPE(PciData) == PCI_CARDBUS_BRIDGE_TYPE)
{
/* Not supported */
DbgPrint("\tDevice is a PCI Cardbus Bridge. It will not work!\n");
continue;
}
/* Check if this is a PCI device */
if (PCI_CONFIGURATION_TYPE(PciData) != PCI_BRIDGE_TYPE)
{
/* Check if it has an interrupt pin and line registered */
if ((PciData->u.type1.InterruptPin) &&
(PciData->u.type1.InterruptLine))
{
/* Check if this interrupt line is connected to the bus */
if (PciData->u.type1.InterruptLine < 16)
{
/* Is this an IDE device? */
if (!HalpIsIdeDevice(PciData))
{
/* We'll mask out this interrupt then */
DbgPrint("\tDevice is using IRQ %d! ISA Cards using that IRQ may fail!\n",
PciData->u.type1.InterruptLine);
HalpPciIrqMask |= (1 << PciData->u.type1.InterruptLine);
}
}
}
}
/* Check for broken Intel chips */
if (PciData->VendorID == 0x8086)
{
/* Check for broken 82830 PCI controller */
if ((PciData->DeviceID == 0x04A3) &&
(PciData->RevisionID < 0x11))
{
/* Skip */
DbgPrint("\tDevice is a broken Intel 82430 PCI Controller. It will not work!\n\n");
continue;
}
/* Check for broken 82378 PCI-to-ISA Bridge */
if ((PciData->DeviceID == 0x0484) &&
(PciData->RevisionID <= 3))
{
/* Skip */
DbgPrint("\tDevice is a broken Intel 82378 PCI-to-ISA Bridge. It will not work!\n\n");
continue;
}
/* Check for broken 82450 PCI Bridge */
if ((PciData->DeviceID == 0x84C4) &&
(PciData->RevisionID <= 4))
{
DbgPrint("\tDevice is a Intel Orion 82450 PCI Bridge. It will not work!\n\n");
continue;
}
}
/* Do we know this card? */
if (!ExtendedAddressDecoding)
{
/* Check for it */
if (HalpIsRecognizedCard(PciRegistryInfo,
PciData,
HALP_CARD_FEATURE_FULL_DECODE))
{
/* We'll do chipset checks later */
DbgPrint("\tDevice has Extended Address Decoding. It may fail to work on older BIOSes!\n");
ExtendedAddressDecoding = TRUE;
}
}
/* Now check the registry for chipset hacks */
Status = HalpGetChipHacks(PciData->VendorID,
PciData->DeviceID,
PciData->RevisionID,
&HackFlags);
if (NT_SUCCESS(Status))
{
/* Check for broken ACPI routing */
if (HackFlags & HAL_PCI_CHIP_HACK_DISABLE_ACPI_IRQ_ROUTING)
{
DbgPrint("This chipset has broken ACPI IRQ Routing! Be aware!\n\n");
continue;
}
/* Check for broken ACPI timer */
if (HackFlags & HAL_PCI_CHIP_HACK_BROKEN_ACPI_TIMER)
{
DbgPrint("This chipset has a broken ACPI timer! Be aware!\n\n");
continue;
}
/* Check for hibernate-disable */
if (HackFlags & HAL_PCI_CHIP_HACK_DISABLE_HIBERNATE)
{
DbgPrint("This chipset has a broken PCI device which is incompatible with hibernation. Be aware!\n\n");
continue;
}
/* Check for USB controllers that generate SMIs */
if (HackFlags & HAL_PCI_CHIP_HACK_USB_SMI_DISABLE)
{
DbgPrint("This chipset has a USB controller which generates SMIs. ReactOS will likely fail to boot!\n\n");
continue;
}
}
/* Terminate the entry */
DbgPrint("\n");
}
}
}
/* Initialize NMI Crash Flag */
HalpGetNMICrashFlag();
/* Free the registry data */
ExFreePoolWithTag(PciRegistryInfo, TAG_HAL);
/* Tell PnP if this hard supports correct decoding */
HalpMarkChipsetDecode(ExtendedAddressDecoding);
DbgPrint("====== PCI BUS DETECTION COMPLETE =======\n\n");
#endif
}
