void checkHeartbeat() {
if (cyclesUntilReset>=0) cyclesUntilReset = cyclesUntilReset - 1;
if (cyclesUntilReset==0)
{
cyclesUntilReset = -1;
HardReset();
}
}
nsresult
nsSMILTimedElement::SetBeginOrEndSpec(const nsAString& aSpec,
PRBool aIsBegin)
{
nsRefPtr<nsSMILTimeValueSpec> spec;
SMILTimeValueSpecList& timeSpecsList = aIsBegin ? mBeginSpecs : mEndSpecs;
nsTArray<nsSMILInstanceTime>& instancesList
= aIsBegin ? mBeginInstances : mEndInstances;
timeSpecsList.Clear();
instancesList.Clear();
HardReset(); // XXX Need to take care of time dependents here
PRInt32 start;
PRInt32 end = -1;
PRInt32 length;
do {
start = end + 1;
end = aSpec.FindChar(';', start);
length = (end == -1) ? -1 : end - start;
spec = NS_NewSMILTimeValueSpec(this, aIsBegin,
Substring(aSpec, start, length));
if (spec)
timeSpecsList.AppendElement(spec);
} while (end != -1 && spec);
if (!spec) {
timeSpecsList.Clear();
instancesList.Clear();
HardReset();
return NS_ERROR_FAILURE;
}
UpdateCurrentInterval();
return NS_OK;
}
static bool MessageDone() {
// TODO: check pin capabilities
switch (rx_msg.type) {
case HARD_RESET:
CHECK(rx_msg.args.hard_reset.magic == IOIO_MAGIC);
HardReset();
break;
case CHECK_INTERFACE:
CheckInterface(rx_msg.args.check_interface.interface_id);
break;
case READ_FINGERPRINT:
if (!ReadFingerprint()) {
log_printf("Failed to read fingerprint");
return false;
}
break;
case WRITE_FINGERPRINT:
if (!WriteFingerprint(rx_msg.args.write_fingerprint.fingerprint)) {
log_printf("Failed to write fingerprint");
return false;
}
break;
case WRITE_IMAGE:
rx_message_state = WAIT_FILE;
rx_message_remaining = rx_msg.args.write_image.size;
if (!EraseFingerprint()) {
log_printf("Failed to erase fingerprint");
return false;
}
file_checksum = 0;
log_printf("Starting to receive image file");
IOIOFileInit();
break;
// BOOKMARK(add_feature): Add incoming message handling to switch clause.
default:
log_printf("Unexpected message type: 0x%x", rx_msg.type);
return false;
}
return true;
}
MainWindow::MainWindow(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::MainWindow)
{
ui->setupUi(this);
this->ui->b_disconnect->setEnabled(false);
this->ui->b_send->setEnabled(false);
this->ui->b_sendlast->setEnabled(false);
this->ui->b_receive->setEnabled(false);
this->ui->b_verify->setEnabled(false);
this->stlink = new stlinkv2();
this->devices = new DeviceList(this);
this->tfThread = new transferThread();
if (this->devices->IsLoaded()) {
this->ui->gb_top->setEnabled(true);
this->log(QString::number(this->devices->getDevicesCount())+" Device descriptions loaded.");
QObject::connect(this->ui->b_quit,SIGNAL(clicked()),this,SLOT(Quit()));
QObject::connect(this->ui->b_qt,SIGNAL(clicked()),qApp,SLOT(aboutQt()));
QObject::connect(this->ui->b_connect, SIGNAL(clicked()), this, SLOT(Connect()));
QObject::connect(this->ui->b_disconnect, SIGNAL(clicked()), this, SLOT(Disconnect()));
QObject::connect(this->ui->b_send, SIGNAL(clicked()), this, SLOT(Send()));
QObject::connect(this->ui->b_sendlast, SIGNAL(clicked()), this, SLOT(SendLast()));
QObject::connect(this->ui->b_receive, SIGNAL(clicked()), this, SLOT(Receive()));
QObject::connect(this->ui->b_verify, SIGNAL(clicked()), this, SLOT(Verify()));
QObject::connect(this->ui->b_halt, SIGNAL(clicked()), this, SLOT(HaltMCU()));
QObject::connect(this->ui->b_run, SIGNAL(clicked()), this, SLOT(RunMCU()));
QObject::connect(this->ui->b_reset, SIGNAL(clicked()), this, SLOT(ResetMCU()));
QObject::connect(this->ui->r_jtag, SIGNAL(clicked()), this, SLOT(setModeJTAG()));
QObject::connect(this->ui->r_swd, SIGNAL(clicked()), this, SLOT(setModeSWD()));
QObject::connect(this->ui->b_hardReset, SIGNAL(clicked()), this, SLOT(HardReset()));
// Thread
QObject::connect(this->tfThread, SIGNAL(sendProgress(quint32)), this, SLOT(updateProgress(quint32)));
QObject::connect(this->tfThread, SIGNAL(sendStatus(QString)), this, SLOT(updateStatus(QString)));
QObject::connect(this->tfThread, SIGNAL(sendLoaderStatus(QString)), this, SLOT(updateLoaderStatus(QString)));
QObject::connect(this->stlink, SIGNAL(bufferPct(quint32)), this, SLOT(updateLoaderPct(quint32)));
QObject::connect(this->tfThread, SIGNAL(sendLock(bool)), this, SLOT(lockUI(bool)));
QObject::connect(this->ui->b_stop, SIGNAL(clicked()), this->tfThread, SLOT(halt()));
QObject::connect(this->tfThread, SIGNAL(sendLog(QString)), this, SLOT(log(QString)));
// Help
QObject::connect(this->ui->b_help, SIGNAL(clicked()), this, SLOT(showHelp()));
}
static BOOL MessageDone() {
// TODO: check pin capabilities
switch (rx_msg.type) {
case HARD_RESET:
CHECK(rx_msg.args.hard_reset.magic == IOIO_MAGIC);
HardReset();
break;
case SOFT_RESET:
SoftReset();
Echo();
break;
case SET_PIN_DIGITAL_OUT:
CHECK(rx_msg.args.set_pin_digital_out.pin < NUM_PINS);
SetPinDigitalOut(rx_msg.args.set_pin_digital_out.pin,
rx_msg.args.set_pin_digital_out.value,
rx_msg.args.set_pin_digital_out.open_drain);
break;
case SET_DIGITAL_OUT_LEVEL:
CHECK(rx_msg.args.set_digital_out_level.pin < NUM_PINS);
SetDigitalOutLevel(rx_msg.args.set_digital_out_level.pin,
rx_msg.args.set_digital_out_level.value);
break;
case SET_PIN_DIGITAL_IN:
CHECK(rx_msg.args.set_pin_digital_in.pin < NUM_PINS);
CHECK(rx_msg.args.set_pin_digital_in.pull < 3);
SetPinDigitalIn(rx_msg.args.set_pin_digital_in.pin, rx_msg.args.set_pin_digital_in.pull);
break;
case SET_CHANGE_NOTIFY:
CHECK(rx_msg.args.set_change_notify.pin < NUM_PINS);
if (rx_msg.args.set_change_notify.cn) {
Echo();
}
SetChangeNotify(rx_msg.args.set_change_notify.pin, rx_msg.args.set_change_notify.cn);
if (!rx_msg.args.set_change_notify.cn) {
Echo();
}
break;
case SET_PIN_PWM:
CHECK(rx_msg.args.set_pin_pwm.pin < NUM_PINS);
CHECK(rx_msg.args.set_pin_pwm.pwm_num < NUM_PWM_MODULES);
SetPinPwm(rx_msg.args.set_pin_pwm.pin, rx_msg.args.set_pin_pwm.pwm_num,
rx_msg.args.set_pin_pwm.enable);
break;
case SET_PWM_DUTY_CYCLE:
CHECK(rx_msg.args.set_pwm_duty_cycle.pwm_num < NUM_PWM_MODULES);
SetPwmDutyCycle(rx_msg.args.set_pwm_duty_cycle.pwm_num,
rx_msg.args.set_pwm_duty_cycle.dc,
rx_msg.args.set_pwm_duty_cycle.fraction);
break;
case SET_PWM_PERIOD:
CHECK(rx_msg.args.set_pwm_period.pwm_num < NUM_PWM_MODULES);
SetPwmPeriod(rx_msg.args.set_pwm_period.pwm_num,
rx_msg.args.set_pwm_period.period,
rx_msg.args.set_pwm_period.scale_l
| (rx_msg.args.set_pwm_period.scale_h) << 1);
break;
case SET_PIN_ANALOG_IN:
CHECK(rx_msg.args.set_pin_analog_in.pin < NUM_PINS);
SetPinAnalogIn(rx_msg.args.set_pin_analog_in.pin);
break;
case UART_DATA:
CHECK(rx_msg.args.uart_data.uart_num < NUM_UART_MODULES);
UARTTransmit(rx_msg.args.uart_data.uart_num,
rx_msg.args.uart_data.data,
rx_msg.args.uart_data.size + 1);
break;
case UART_CONFIG:
CHECK(rx_msg.args.uart_config.uart_num < NUM_UART_MODULES);
CHECK(rx_msg.args.uart_config.parity < 3);
UARTConfig(rx_msg.args.uart_config.uart_num,
rx_msg.args.uart_config.rate,
rx_msg.args.uart_config.speed4x,
rx_msg.args.uart_config.two_stop_bits,
rx_msg.args.uart_config.parity);
break;
case SET_PIN_UART:
CHECK(rx_msg.args.set_pin_uart.pin < NUM_PINS);
CHECK(rx_msg.args.set_pin_uart.uart_num < NUM_UART_MODULES);
SetPinUart(rx_msg.args.set_pin_uart.pin,
rx_msg.args.set_pin_uart.uart_num,
rx_msg.args.set_pin_uart.dir,
rx_msg.args.set_pin_uart.enable);
break;
case SPI_MASTER_REQUEST:
CHECK(rx_msg.args.spi_master_request.spi_num < NUM_SPI_MODULES);
CHECK(rx_msg.args.spi_master_request.ss_pin < NUM_PINS);
{
const BYTE total_size = rx_msg.args.spi_master_request.total_size + 1;
const BYTE data_size = rx_msg.args.spi_master_request.data_size_neq_total
? rx_msg.args.spi_master_request.data_size
: total_size;
const BYTE res_size = rx_msg.args.spi_master_request.res_size_neq_total
? rx_msg.args.spi_master_request.vararg[
rx_msg.args.spi_master_request.data_size_neq_total]
: total_size;
const BYTE* const data = &rx_msg.args.spi_master_request.vararg[
rx_msg.args.spi_master_request.data_size_neq_total
+ rx_msg.args.spi_master_request.res_size_neq_total];
SPITransmit(rx_msg.args.spi_master_request.spi_num,
rx_msg.args.spi_master_request.ss_pin,
data,
data_size,
total_size,
total_size - res_size);
}
break;
case SPI_CONFIGURE_MASTER:
CHECK(rx_msg.args.spi_configure_master.spi_num < NUM_SPI_MODULES);
SPIConfigMaster(rx_msg.args.spi_configure_master.spi_num,
rx_msg.args.spi_configure_master.scale,
rx_msg.args.spi_configure_master.div,
rx_msg.args.spi_configure_master.smp_end,
rx_msg.args.spi_configure_master.clk_edge,
rx_msg.args.spi_configure_master.clk_pol);
break;
case SET_PIN_SPI:
CHECK(rx_msg.args.set_pin_spi.mode < 3);
CHECK((!rx_msg.args.set_pin_spi.enable
&& rx_msg.args.set_pin_spi.mode == 1)
|| rx_msg.args.set_pin_spi.pin < NUM_PINS);
CHECK((!rx_msg.args.set_pin_spi.enable
&& rx_msg.args.set_pin_spi.mode != 1)
|| rx_msg.args.set_pin_spi.spi_num < NUM_SPI_MODULES);
SetPinSpi(rx_msg.args.set_pin_spi.pin,
rx_msg.args.set_pin_spi.spi_num,
rx_msg.args.set_pin_spi.mode,
rx_msg.args.set_pin_spi.enable);
break;
case I2C_CONFIGURE_MASTER:
CHECK(rx_msg.args.i2c_configure_master.i2c_num < NUM_I2C_MODULES);
I2CConfigMaster(rx_msg.args.i2c_configure_master.i2c_num,
rx_msg.args.i2c_configure_master.rate,
rx_msg.args.i2c_configure_master.smbus_levels);
break;
case I2C_WRITE_READ:
CHECK(rx_msg.args.i2c_write_read.i2c_num < NUM_I2C_MODULES);
{
unsigned int addr;
if (rx_msg.args.i2c_write_read.ten_bit_addr) {
addr = rx_msg.args.i2c_write_read.addr_lsb;
addr = addr << 8
| ((rx_msg.args.i2c_write_read.addr_msb << 1)
| 0b11110000);
} else {
CHECK(rx_msg.args.i2c_write_read.addr_msb == 0
&& rx_msg.args.i2c_write_read.addr_lsb >> 7 == 0
&& rx_msg.args.i2c_write_read.addr_lsb >> 2 != 0b0011110);
addr = rx_msg.args.i2c_write_read.addr_lsb << 1;
}
I2CWriteRead(rx_msg.args.i2c_write_read.i2c_num,
addr,
rx_msg.args.i2c_write_read.data,
rx_msg.args.i2c_write_read.write_size,
rx_msg.args.i2c_write_read.read_size);
}
break;
case SET_ANALOG_IN_SAMPLING:
CHECK(rx_msg.args.set_analog_pin_sampling.pin < NUM_PINS);
ADCSetScan(rx_msg.args.set_analog_pin_sampling.pin,
rx_msg.args.set_analog_pin_sampling.enable);
break;
case CHECK_INTERFACE:
CheckInterface(rx_msg.args.check_interface.interface_id);
break;
case ICSP_SIX:
ICSPSix(rx_msg.args.icsp_six.inst);
break;
case ICSP_REGOUT:
ICSPRegout();
break;
case ICSP_PROG_ENTER:
ICSPEnter();
break;
case ICSP_PROG_EXIT:
ICSPExit();
break;
case ICSP_CONFIG:
if (rx_msg.args.icsp_config.enable) {
Echo();
}
ICSPConfigure(rx_msg.args.icsp_config.enable);
if (!rx_msg.args.icsp_config.enable) {
Echo();
}
break;
case INCAP_CONFIG:
CHECK(rx_msg.args.incap_config.incap_num < NUM_INCAP_MODULES);
CHECK(!rx_msg.args.incap_config.double_prec
|| 0 == (rx_msg.args.incap_config.incap_num & 0x01));
CHECK(rx_msg.args.incap_config.mode < 6);
CHECK(rx_msg.args.incap_config.clock < 4);
InCapConfig(rx_msg.args.incap_config.incap_num,
rx_msg.args.incap_config.double_prec,
rx_msg.args.incap_config.mode,
rx_msg.args.incap_config.clock);
break;
case SET_PIN_INCAP:
CHECK(rx_msg.args.set_pin_incap.incap_num < NUM_INCAP_MODULES);
CHECK(!rx_msg.args.set_pin_incap.enable
|| rx_msg.args.set_pin_incap.pin < NUM_PINS);
SetPinInCap(rx_msg.args.set_pin_incap.pin,
rx_msg.args.set_pin_incap.incap_num,
rx_msg.args.set_pin_incap.enable);
break;
case SOFT_CLOSE:
log_printf("Soft close requested");
Echo();
state = STATE_CLOSING;
break;
case SET_PIN_PULSECOUNTER:
CHECK(rx_msg.args.set_pin_pulsecounter.pin < NUM_PINS);
CHECK(rx_msg.args.set_pin_pulsecounter.mode < 4);
CHECK(rx_msg.args.set_pin_pulsecounter.rateord < 9);
CHECK(rx_msg.args.set_pin_pulsecounter.stepsord < 4);
SetPinPulseCounter(rx_msg.args.set_pin_pulsecounter.pin,
rx_msg.args.set_pin_pulsecounter.enable,
rx_msg.args.set_pin_pulsecounter.mode,
rx_msg.args.set_pin_pulsecounter.rateord,
rx_msg.args.set_pin_pulsecounter.stepsord);
break;
// BOOKMARK(add_feature): Add incoming message handling to switch clause.
// Call Echo() if the message is to be echoed back.
default:
return FALSE;
}
return TRUE;
}
/************************************
* Main program *
************************************/
int32_t main()
{
int32_t quit = 0,i, correct,number;
char buf[257];
char *langs[]={
"US\0","DE\0","SE\0","FR\0","IT\0",
};
/* Read UAE configuration */
i = GetUaeConfig( &config );
while( quit == 0 ) {
printf(" UAE-Control v0.1\n\n");
printf(" 1) Reset\n");
printf(" 2) Debug\n");
printf(" 3) Exit Emulator\n");
printf(" 4) Change framerate (Currently : %ld)\n", config.framerate);
printf(" 5) Toggle sound (Currently : %s)\n", config.do_output_sound ? "ON" : "OFF");
printf(" 6) Toggle fake joystick (Currently : %s)\n", config.do_fake_joystick ? "ON" : "OFF");
printf(" 7) Change language (Currently : %s)\n", langs[config.keyboard]);
printf(" 8) Eject a disk\n");
printf(" 9) Insert a disk\n");
printf("10) Exit UAE-Control\n\n");
correct = 0;
while( correct == 0 ) {
printf(" Command : ");
gets( buf );
i = atoi( buf );
if ((i > 0) && (i < 11))
correct = 1;
}
switch( i ) {
case 1:
HardReset();
break;
case 2:
DebugFunc();
break;
case 3:
ExitEmu();
break;
case 4:
printf(" Enter new framerate (1-20) :");
gets( buf );
number = atoi( buf );
if (SetFrameRate (number))
GetUaeConfig(&config);
else
printf(" Illegal value, not changed.\n");
break;
case 5:
if (config.do_output_sound)
DisableSound();
else
EnableSound();
GetUaeConfig( &config );
break;
case 6:
if (config.do_fake_joystick)
DisableJoystick();
else
EnableJoystick();
GetUaeConfig( &config );
break;
case 7:
printf(" 1 = US, 2 = DE, 3 = SE, 4 = FR, 5 = IT\n");
printf(" What will it be : ");
gets( buf );
number = atoi( buf );
if ((number >= 1) && (number <= 5)) {
ChangeLanguage( number-1 );
GetUaeConfig( &config );
} else {
printf(" Illegal value, not changed.\n");
}
break;
case 8:
print_drive_status();
printf(" Eject which drive (1-4): ");
gets( buf );
number = atoi( buf );
if ((number >= 1) && (number <=4 )) {
EjectDisk( number-1 );
GetUaeConfig( &config );
} else {
printf(" Illegal drive, not changed.\n");
}
break;
case 9:
print_drive_status();
printf(" Enter disk to drive (1-4): ");
gets( buf );
number = atoi( buf );
if ((number >= 1) && (number <= 4)) {
printf("Name of diskfile :");
gets( buf );
InsertDisk( (UBYTE *)&buf, number - 1 );
GetUaeConfig( &config );
} else {
printf(" Illegal drive, not changed.\n");
}
break;
case 10:
quit = 1;
break;
}
}
quit_program(0, "");
return(0);
}
/*
Function Name : LPC3xxx_MiniportInitialize
Description :
Called by the NDIS Wrapper to initialize the adapter.
0. Verify the Adapter v/s the driver
1. Create and initilize the adapter structure
2. Read and load the registry settings
3. Initialize the chip
4. Establish the link
Parameters :
PNDIS_STATUS OpenErrorStatus - Additional error status, if return value is error
PUINT MediumIndex - specifies the medium type the driver or its network adapter uses
PNDIS_MEDIUM MediumArray - Specifies an array of NdisMediumXXX values from which
MiniportInitialize selects one that its network adapter supports
or that the driver supports as an interface to higher-level drivers.
UINT MediumArraySize - Specifies the number of elements at MediumArray
NDIS_HANDLE AdapterHandle - Specifies a handle identifying the miniport’s network adapter,
which is assigned by the NDIS library
NDIS_HANDLE ConfigurationContext - Specifies a handle used only during initialization for
calls to NdisXXX configuration and initialization functions
Return Value :
NDIS_STATUS Status
*/
NDIS_STATUS LPC3xxx_MiniportInitialize( PNDIS_STATUS pOpenErrorStatus,
PUINT pMediumIndex,
PNDIS_MEDIUM pMediumArray,
UINT nMediumArraySize,
NDIS_HANDLE hAdapterHandle,
NDIS_HANDLE hConfigurationContext)
{
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
UINT nArrayIndex;
PMINIPORT_ADAPTER pAdapter;
PHYSICAL_ADDRESS pa;
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS ==> MiniportInitialize\r\n")));
//Check for the supported 802.3 media
for(nArrayIndex = 0; nArrayIndex < nMediumArraySize; nArrayIndex++)
{
if(NdisMedium802_3 == pMediumArray[nArrayIndex])
break;
}
if(nArrayIndex == nMediumArraySize)
{
DEBUGMSG(ZONE_INIT | ZONE_ERROR, (TEXT("LPC3xxx NDIS : ERROR - No Supported Media types \r\n")));
DEBUGMSG(ZONE_INIT | ZONE_ERROR, (TEXT("LPC3xxx NDIS <== MiniportInitialize \r\n")));
return(NDIS_STATUS_UNSUPPORTED_MEDIA);
}
*pMediumIndex = nArrayIndex;
//Allocate memory for the adapter structure
Status = NdisAllocateMemory((PVOID *) &pAdapter, MINIPORT_ADAPTER_SIZE, 0, HighestAcceptedMax);
if(Status != NDIS_STATUS_SUCCESS)
{
DEBUGMSG(ZONE_INIT | ZONE_ERROR, (TEXT("LPC3xxx NDIS: ERROR - No Memory for Adapter Structure!\r\n")));
DEBUGMSG(ZONE_INIT | ZONE_ERROR, (TEXT("LPC3xxx NDIS <== MiniPort Initialize\r\n")));
return(NDIS_STATUS_RESOURCES);
}
NdisZeroMemory(pAdapter, MINIPORT_ADAPTER_SIZE); //Clean it up
//Set up the default values
pAdapter->hAdapter = hAdapterHandle;
pAdapter->eState = INITIALIZING_STATE;
pAdapter->IsInterruptSet = FALSE;
pAdapter->IsPortRegistered = FALSE;
pAdapter->dwIRQNumber = -1;
pAdapter->bMediaConnected = FALSE;
pAdapter->bAutoNeg = TRUE; // Autoneg per default (overriden by registry settings)
pAdapter->bFullDuplex = TRUE; // Full duplex per default
pAdapter->b100Mbps = TRUE; // 100 Mbps per default
pAdapter->bRMII = TRUE; // RMII interface per default
//Setup Receive control Register
pAdapter->bPerfectMatch = TRUE; // We want to receive the frames for this station
pAdapter->bPromiscuous = FALSE; // Not in Promescuous mode per default
pAdapter->bRxBroadcast = TRUE; // We do forward the broadcasted frames (DHCP required at least)
pAdapter->bRxMulticastHash = TRUE; // We forward matched multicast frames
pAdapter->bRxMulticastAll = FALSE; // We do not forward all multicast frames
pAdapter->bRxUnicastHash = TRUE; // We do not forward matched unicast frames
pAdapter->bRxUnicastAll = TRUE; // We do not forward all unicast frames
pAdapter->dwBufferPhyAddr = 0;
pAdapter->dwTxStrides = 0;
pAdapter->dwRxStrides = 0;
pAdapter->dwControllerAddress = 0;
pAdapter->pEMACRegs = NULL;
pAdapter->dwEMACBuffersSize = 0;
pAdapter->pPATXDesc = 0;
pAdapter->pPARXDesc = 0;
pAdapter->pPATXBuffer = 0;
pAdapter->pPARXBuffer = 0;
pAdapter->pPATXStatus = 0;
pAdapter->pPARXStatus = 0;
pAdapter->pVAEMACBuffers= NULL;
pAdapter->pVATXDesc = NULL;
pAdapter->pVARXDesc = NULL;
pAdapter->pVATXStatus = NULL;
pAdapter->pVARXStatus = NULL;
//Allocate memory for the LookAhead buffer
pAdapter->dwLookAheadBufferSize = MAX_FRAME_SIZE;
Status = NdisAllocateMemory((PVOID *) &pAdapter->pVALookAheadBuffer, pAdapter->dwLookAheadBufferSize, 0, HighestAcceptedMax);
if(Status != NDIS_STATUS_SUCCESS)
{
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS: ERROR - No Memory for LookAhead buffer!\r\n")));
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS <== MiniPort Initialize\r\n")));
BackOut(pAdapter);
return(NDIS_STATUS_RESOURCES);
}
NdisZeroMemory(pAdapter->pVALookAheadBuffer, pAdapter->dwLookAheadBufferSize); //Clean it up
pAdapter->MACAddress[0] = 0x02;
pAdapter->MACAddress[1] = 0x03;
pAdapter->MACAddress[2] = 0x04;
pAdapter->MACAddress[3] = 0x06;
pAdapter->MACAddress[4] = 0x06;
pAdapter->MACAddress[5] = 0x08;
//Get the adapter information from the registry
Status = GetRegistrySettings(pAdapter, hConfigurationContext);
if(Status != NDIS_STATUS_SUCCESS)
{
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS: ERROR - Configure Adapter failed!\r\n")));
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS <== MiniPort Initialize\r\n")));
BackOut(pAdapter);
return(NDIS_STATUS_FAILURE);
}
// Allocate the memory for Buffers
// Computing required space
pAdapter->dwEMACBuffersSize = pAdapter->dwRxStrides * ( sizeof(LPCS_ETH_DESC)
+ sizeof(LPCS_ETH_RX_STATUS)
+ MAX_FRAME_SIZE)
+ pAdapter->dwTxStrides * ( sizeof(LPCS_ETH_DESC)
+ sizeof(LPCS_ETH_TX_STATUS)
+ MAX_FRAME_SIZE);
// Allocating space
pAdapter->pVAEMACBuffers = MapRegisters (pAdapter->dwBufferPhyAddr,
pAdapter->dwEMACBuffersSize);
if(pAdapter->pVAEMACBuffers == NULL)
{
RETAILMSG(1, (TEXT("LPC3xxx NDIS:ERROR : Can't Allocate Buffer!\r\n")));
BackOut(pAdapter);
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS:<== MiniPort Initialize FAILED !!\r\n")));
return(NDIS_STATUS_RESOURCES);
}
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS:Allocated DMA Buffers Successfully!\r\n")));
// Splitting allocated buffers into smaller areas
// Physical Addresses
pAdapter->pPARXDesc = pAdapter->dwBufferPhyAddr;
pAdapter->pPARXStatus = pAdapter->pPARXDesc + pAdapter->dwRxStrides * sizeof(LPCS_ETH_DESC);
pAdapter->pPATXDesc = pAdapter->pPARXStatus + pAdapter->dwRxStrides * sizeof(LPCS_ETH_RX_STATUS);
pAdapter->pPATXStatus = pAdapter->pPATXDesc + pAdapter->dwTxStrides * sizeof(LPCS_ETH_DESC);
pAdapter->pPARXBuffer = pAdapter->pPATXStatus + pAdapter->dwTxStrides * sizeof(LPCS_ETH_TX_STATUS);
pAdapter->pPATXBuffer = pAdapter->pPARXBuffer + pAdapter->dwRxStrides * MAX_FRAME_SIZE;
// Virtual Addresses
pAdapter->pVARXDesc = pAdapter->pVAEMACBuffers;
pAdapter->pVARXStatus = (PVOID)((DWORD)pAdapter->pVARXDesc + pAdapter->dwRxStrides * sizeof(LPCS_ETH_DESC));
pAdapter->pVATXDesc = (PVOID)((DWORD)pAdapter->pVARXStatus + pAdapter->dwRxStrides * sizeof(LPCS_ETH_RX_STATUS));
pAdapter->pVATXStatus = (PVOID)((DWORD)pAdapter->pVATXDesc + pAdapter->dwTxStrides * sizeof(LPCS_ETH_DESC));
pAdapter->pVARXBuffer = (PVOID)((DWORD)pAdapter->pVATXStatus + pAdapter->dwTxStrides * sizeof(LPCS_ETH_TX_STATUS));
pAdapter->pVATXBuffer = (PVOID)((DWORD)pAdapter->pVARXBuffer + pAdapter->dwRxStrides * MAX_FRAME_SIZE);
// Allocating the TX Packet buffer
Status = NdisAllocateMemory((PVOID *) &pAdapter->pTXPackets, sizeof(TX_PACKET) * pAdapter->dwTxStrides, 0, HighestAcceptedMax);
if(Status != NDIS_STATUS_SUCCESS)
{
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS: ERROR - No Memory for TXBuffers buffer!\r\n")));
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS <== MiniPort Initialize\r\n")));
BackOut(pAdapter);
return(NDIS_STATUS_RESOURCES);
}
NdisZeroMemory(pAdapter->pTXPackets, sizeof(TX_PACKET) * pAdapter->dwTxStrides); //Clean it up
//Register the interrupt
NdisMSetAttributes(pAdapter->hAdapter, (NDIS_HANDLE) pAdapter, TRUE, NdisInterfaceInternal);
Status = NdisMRegisterInterrupt(&pAdapter->InterruptInfo,
pAdapter->hAdapter,
pAdapter->dwIRQNumber,
0,
TRUE,
FALSE,
NdisInterruptLatched);
if(Status != NDIS_STATUS_SUCCESS)
{
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS : ERROR - Can't Attach to Interrupt!\r\n")));
BackOut(pAdapter);
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS:<== MiniPort Initialize\r\n")));
return(Status);
}
else
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS: Interrupt Registered !!! \r\n")));
pAdapter->IsInterruptSet = TRUE;
//Register the IOBase address. Modify this code according to the platform
Status = NdisMRegisterIoPortRange((PVOID *) &(pAdapter->pEMACRegs),
pAdapter->hAdapter,
pAdapter->dwControllerAddress,
sizeof(ETHERNET_REGS_T));
if(Status != NDIS_STATUS_SUCCESS)
{
RETAILMSG(1, (TEXT("LAN91C9111 : ERROR - Can't Register I/O Port Range!\r\n")));
DEBUGMSG(ZONE_INIT, (TEXT("LAN91C9111 <== MiniPort Initialize\r\n")));
BackOut(pAdapter);
return(NDIS_STATUS_RESOURCES);
}
pAdapter->IsPortRegistered = TRUE;
//EnablePeriphClock(ETHERNET);
pa.QuadPart = CLK_PM_BASE;
n_pCLKPWRRegs = (CLKPWR_REGS_T *)
MmMapIoSpace(pa, sizeof (CLKPWR_REGS_T), FALSE);
if (n_pCLKPWRRegs == NULL)
{
RETAILMSG(1, (_T("LCD: lpc32xx_hw_init: Critcal error: cannot map registers!\r\n")));
MmUnmapIoSpace(n_pCLKPWRRegs, sizeof(CLKPWR_REGS_T));
return;
}
n_pCLKPWRRegs->clkpwr_macclk_ctrl = CLKPWR_MACCTRL_HRCCLK_EN|
CLKPWR_MACCTRL_MMIOCLK_EN|
CLKPWR_MACCTRL_DMACLK_EN|
CLKPWR_MACCTRL_USE_RMII_PINS;
// // Initialize Tx and Rx DMA Descriptors
//DEBUGMSG(ZONE_INIT, (L"LPC_EthInit: Initializing Descriptor engine\r\n"));
//EMAC_InitEngine(pAdapter);
if(!HardReset(pAdapter))
{
return NDIS_STATUS_FAILURE;
}
DEBUGMSG(ZONE_INIT, (TEXT("LPC3xxx NDIS <== MiniportInitialize \r\n")));
//Ready
return NDIS_STATUS_SUCCESS;
}