void PowerCycleAVR(){
println_I("Power cycling the AVR");
HoldAVRReset();
// getCommand(progmode);
// writeLowFuse();
// writeHighFuse();
// writeExtendedFuse();
ReleaseAVRReset();
}
void programMode(void){
HoldAVRReset();
getCommand(progmode);
DelayMs(20);
}
void hardwareInit() {
// Configure the device for maximum performance but do not change the PBDIV
// Given the options, this function will change the flash wait states, RAM
// wait state and enable prefetch cache but will not change the PBDIV.
// The PBDIV value is already set via the pragma FPBDIV option above..
SYSTEMConfig((80000000L), SYS_CFG_WAIT_STATES | SYS_CFG_PCACHE);
SYSTEMConfigPerformance(80000000);
CHECONbits.PREFEN = 0;
int j = 0, i = 0;
for (i = 0; i < 6; i++) {
MyMAC.v[i] = MY_MAC_ADDRESS[i];
}
StartCritical();
println_I("MAC");
enableFlashStorage(true);
FlashGetMac(MyMAC.v);
for (i = 0; i < 6; i++) {
macStr[j++] = GetHighNib(MyMAC.v[i]);
macStr[j++] = GetLowNib(MyMAC.v[i]);
}
macStr[12] = 0;
//println_I("MAC address is =");
print_I(macStr);
Pic32_Bowler_HAL_Init();
usb_CDC_Serial_Init(dev, macStr, 0x04D8, 0x3742);
InitLEDS();
SetColor(0, 0, 1);
mInitSwitch();
//AVR Reset pin
InitAVR_RST();
HoldAVRReset();
//AVR must be running before pin states can be synced in the pin initialization
ReleaseAVRReset();
//Starts co-proc uart
initCoProcCom();
InitPinFunction();
//Must initialize IO before hardware
LoadDefaultValues();
//println_W("Pin States");
SyncModes();
//println_I("Modes synced, initializing channels");
initAdvancedAsync();
//println_I("Adding IO Namespace");
addNamespaceToList( get_bcsIoNamespace());
//println_I("Adding IO.Setmode Namespace");
addNamespaceToList(get_bcsIoSetmodeNamespace());
//println_I("Adding DyIO Namespace");
addNamespaceToList(get_neuronRoboticsDyIONamespace());
//println_I("Adding PID Namespace");
addNamespaceToList( getBcsPidNamespace());
//println_I("Adding DyIO PID Namespace");
addNamespaceToList( get_bcsPidDypidNamespace());
//println_I("Adding Safe Namespace");
addNamespaceToList((NAMESPACE_LIST *) get_bcsSafeNamespace());
Init_FLAG_BUSY_ASYNC();
//InitCTS_RTS_HO();
//ConfigUARTOpenCollector();
ConfigUARTRXTristate();
//Starts Timer 3
InitCounterPins();
InitADC();
//SetFwRev(rev);
GetName(Name);
if(Name[0]==0xff){
for(i=0;i<17;i++){
Name[i]=defaultName[i] ;
}
SetName(Name);
GetName(Name);
}
if (!GetLockCode(LockCode)){
for(i=0;i<4;i++){
LockCode[i] = defaultlock[i];
}
SetLockCode(LockCode);
}
EndCritical();
initBluetooth();
if(!hasBluetooth()){
Pic32UARTSetBaud( 115200 );
}
boolean defaultmac=true;
for (i = 0; (i < 6) && defaultmac; i++) {
if(MyMAC.v[i] != MY_MAC_ADDRESS[i]){
defaultmac = false;
}
}
if(defaultmac){
srand((unsigned) GetRawVoltage());// random seed from the air
MyMAC.v[3] = MINOR_REV;
MyMAC.v[4] = FIRMWARE_VERSION;
MyMAC.v[5] = rand() % 255;
FlashSetMac(MyMAC.v);
U1CON = 0x0000;
DelayMs(100);
Reset();
}
}
void hardwareInit(){
StartCritical();
println_I("Getting MAC from flash");
FlashGetMac(MyMAC.v);
char macStr[13];
int j=0,i=0;
for (i=0;i<6;i++){
macStr[j++]=GetHighNib(MyMAC.v[i]);
macStr[j++]=GetLowNib(MyMAC.v[i]);
}
macStr[12]=0;
println_I("MAC address is =");
print_I(macStr);
#if defined(ROBOSUB_DEMO)
//char * dev = "AHD Wave";
#else
char * dev = "DyIO v.3";
#endif
Pic32_Bowler_HAL_Init();
usb_CDC_Serial_Init(dev,macStr,0x04D8,0x3742);
mInitSwitch();
for (i=0;i<6;i++){
MyMAC.v[i]= MY_MAC_ADDRESS[i];
}
//Must initialize IO before hardware
InitPins();
println_I("Adding IO Namespace");
addNamespaceToList((NAMESPACE_LIST * )get_bcsIoNamespace());
println_I("Adding IO.Setmode Namespace");
addNamespaceToList((NAMESPACE_LIST * )get_bcsIoSetmodeNamespace());
println_I("Adding DyIO Namespace");
addNamespaceToList((NAMESPACE_LIST * )get_neuronRoboticsDyIONamespace());
println_I("Adding PID Namespace");
addNamespaceToList((NAMESPACE_LIST * )getBcsPidNamespace());
println_I("Adding DyIO PID Namespace");
addNamespaceToList((NAMESPACE_LIST * )get_bcsPidDypidNamespace());
println_I("Adding Safe Namespace");
addNamespaceToList((NAMESPACE_LIST * )get_bcsSafeNamespace());
Init_FLAG_BUSY_ASYNC();
//InitCTS_RTS_HO();
//AVR Reset pin
InitAVR_RST();
HoldAVRReset();
//ConfigUARTOpenCollector();
ConfigUARTRXTristate();
InitLEDS();
SetColor(0,0,1);
//Starts Timer 3
InitCounterPins();
InitADC();
BYTE rev [] = {MAJOR_REV,MINOR_REV,FIRMWARE_VERSION};
FlashSetFwRev(rev);
//Starts co-proc uart
initCoProcCom();
EndCritical();
INTEnableSystemMultiVectoredInt();
// initBluetooth();
// if(!hasBluetooth()){
// Pic32UARTSetBaud( 115200 );
// }
}