/*******************************************************************************
* Function Name : main
* Description : Main program.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
int main(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);
//FSMC config
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOD, &GPIO_InitStructure);
GPIO_ResetBits(GPIOD , GPIO_Pin_7); //CS=0;
LCD_Initializtion();
NVIC_Configuration();/* Interrupt Config (SD/usart) */
USART_Configuration();
GET_SYSclock();
//Prepare for audio processing (nothing special)
Audio_Init();
//SETUP I2S2/I2S3 TX/RX GPIO pins and configure i2s2/i2s3
Codec_Init(48000);
//setup codec settings via i2c to the uda1380 chip
UDA1380_Configuration();
//Setup the DMA/interrupts for I2s2 and I2s3
I2S_Block_Init();
//begin audio processing/playback
I2S_Block_PlayRec((uint32_t)&tx_buffer, (uint32_t)&rx_buffer, BUFF_LEN);
while (1)
{}
}
void main(void)
{
int32_t t_spread;
uint32_t i;
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x8000);
LED_ON(LED_RING_OE); //actually turns the LED ring off
LEDDriver_Init(5);
for (i=0;i<26;i++) LEDDriver_setRGBLED(i,0);
LED_OFF(LED_RING_OE); //actually turns the LED ring on
flag_update_LED_ring=1;
init_inouts();
init_rotary();
init_envout_pwm();
ADC1_Init((uint16_t *)adc_buffer);
ADC3_Init((uint16_t *)potadc_buffer);
Codec_Init(SAMPLERATE);
delay();
set_default_param_values();
set_default_color_scheme();
set_default_user_scalebank();
//overwrite default parameters if a startup bank exists
cur_param_bank = load_startup_params();
if (cur_param_bank == 0xFF){
factory_reset();
cur_param_bank=0;
}
I2S_Block_Init();
TIM6_Config();
DAC_Ch1_NoiseConfig();
spread=(adc_buffer[SPREAD_ADC] >> 8) + 1;
I2S_Block_PlayRec();
//update_spread(1);
while(1){
check_errors();
param_read_switches();
update_ENVOUT_PWM();
update_LED_ring();
update_lock_leds();
t_spread=read_spread();
if (t_spread!=-1) update_spread(t_spread);
process_lock_jacks();
process_lock_buttons();
param_read_q();
param_read_freq_nudge();
param_read_channel_level();
process_rotary_button();
process_rotary_rotation();
if (ui_mode==PLAY)
check_rotary_pressed_repeatedly();
if (ui_mode==EDIT_SCALES)
handle_edit_scale();
if (ui_mode==EDIT_COLORS)
handle_edit_colors();
if (ui_mode==SELECT_PARAMS){
handle_freqpot_changing_filtermode();
handle_slider_changing_clipmode();
}
if (do_ROTUP){
do_ROTUP=0;
rotate_up();
}
if (do_ROTDOWN){
do_ROTDOWN=0;
rotate_down();
}
process_rotateCV();
process_scaleCV();
} //end main loop
} //end main()
void main(void)
{
int16_t x;
// all generator inits
LPCAnalyzer_init();
init_synth(); // which one? --> klatt rsynth !!!! RENAME!
sp0256_init();
lpc_init();
simpleklatt_init();
sam_init();
sam_newsay(); // TEST!
tms5200_init();
tms5200_newsay();
channelv_init();
tube_init();
// tube_newsay();
BANDS_Init_();
Vocoder_Init(32000.0f);
digitalk_init();
digitalk_newsay(0);
nvp_init();
sample_rate_init();
initbraidworm(); // re_name
initvoicform();
formy=malloc(sizeof(Formlet));
formanty=malloc(sizeof(Formant));
blipper=malloc(sizeof(Blip));
RLPFer=malloc(sizeof(RLPF));
Formlet_init(formy);
Formant_init(formanty);
Blip_init(blipper);
RLPF_init(RLPFer);
NTube_init(&tuber);
// wavetable_init(&wavtable, crowtable_slower, 283); // now last arg as length of table=less than 512
wavetable_init(&wavtable, plaguetable_simplesir, 328); // now last arg as length of table=less than 512
// wavetable_init(&wavtable, table_kahrs000, 160); // now last arg as length of table=less than 512
// addwormsans(&myworm, 10.0f,10.0f,200.0f, 200.0f, wanderworm);
// RavenTube_init();
// newBB=BiQuad_new(LPF, 1.0, 1500, 32000, 0.68); // TEST?
////////
ADC1_Init((uint16_t *)adc_buffer);
Codec_Init(32000);
I2S_Block_Init();
I2S_Block_PlayRec((uint32_t)&tx_buffer, (uint32_t)&rx_buffer, BUFF_LEN);
// Audio_Init(); not needed
// tube_init();
// tube_newsay();
// initializeSynthesizer();
// synthesize();
// lpc_newsay(1);
// SAMINIT();
// test audio fill
/* for (x=0;x<32768;x++){
audio_buffer[x]=tube_get_sample();
}*/
// int writepos=run_holmes(writepos);
/* for (x=0;x<32767;x++){
audio_buffer[x]=tube_get_sample();
}
*/
while(1)
{
// testing changing test_elm
// u8 axis=adc_buffer[SELX]>>8; // 16*3=48
// change element, change length? leave stress as is 0
// test_elm[axis*3]=phoneme_prob_remap[adc_buffer[SELY]>>6]; // how many phonemes?=64
// test_elm[(axis*3)+1]=(adc_buffer[SELZ]>>7)+1; // length say max 32
// oldmode=mode;
// mode=adc_buffer[MODE]>>7; // 12 bits to say 32 modes (5 bits)
// mode=10; // TESTING
// if(lpc_busy() == 0) lpc_newsay(adc_buffer[SELX]>>6);
// if(lpc_busy() != 0) lpc_running(); // so just writes once otherwise gets messy...
// if there is a change in mode do something?
// if (oldmode!=mode){
// maintrigger=1;
// }
/* if (maintrigger==1) {writepos=0;trigger=1;} // STRIP_OUT
switch(mode){
case 0:// rsynth/klatt-single phoneme
if (trigger==1){
trigger=0;
u8 phonemm=phoneme_prob_remap[(adc_buffer[SELX]>>6)]; // 7bits=128 %69//6=64
pair xx=klatt_phoneme(writepos,phonemm);
generated=xx.generated;
writepos=xx.writepos;
}
break;
case 1: // rsynth/klatt-chain of phonemes
writepos=run_holmes(writepos);
break;
case 2: // vosim free running
writepos=runVOSIM_SC(writepos);
break;
case 3: // VOSIMondemand
if (trigger==1){
trigger=0;
float freqwency = (float)((adc_buffer[SELX])+100);//1500.0f;
float cycles = (float)((adc_buffer[SELY]>>4)+2);
float decay = ((float)(adc_buffer[SELZ])/4096.0f); // TODO as SELZ!
pair xx=demandVOSIM_SC(writepos,freqwency,cycles,decay);
generated=xx.generated;
writepos=xx.writepos;
}
break;
case 9: // SAM full. no writepos though and just a simple proof here
if (trigger==0){
SAMMain();
trigger=1;
}
break;
case 10:
if(lpc_busy() == 0) lpc_newsay(adc_buffer[SELX]>>6);
if(lpc_busy() != 0) lpc_running(); // so just writes once otherwise gets messy...
break;
case 19: // parwave/simpleklatt
dosimpleklatt();
break;
} // cases
// now readpos is back to one now that we have written something
if (maintrigger==1) {
readpos=0;
maintrigger=0;
}
*/
}
}
