示例#1
0
//------------------------------------------------------------------------------
void UiInput::handleEvent(const Event& event)
{
    if (IS_VALID_POINTER(myActionMap))
    {
        myActionMap->actions[event.id]->call();
    }
    else if (IS_VALID_POINTER(myEventCallback))
    {
        myEventCallback->call(event);
    }
}
示例#2
0
//------------------------------------------------------------------------------
void UiInput::setEventAction(const id_t eventId, const Action action)
{
    if (IS_VALID_POINTER(myEventBehaviors))
    {
        myEventBehaviors[eventId].action = action;
    }
}
示例#3
0
//------------------------------------------------------------------------------
void RotarySwitch::poll(const uint32_t timeMs, Array<UiInput::Event>& events)
{
    for (int i = 0; i < ARRAY_SIZE(myEnableLines); i++)
    {
        EnableLine* enableLine = myEnableLines[i];
        
        if (IS_VALID_POINTER(enableLine))
        {
            bool isActive;
            
            enableLine->isActive(isActive);
            
            if ((isActive != myStateLog[i].isActive) &&
                ((timeMs - myStateLog[i].timeStampMs) >= debounceTimeMs))
            {
                if (isActive)
                {
                    // Should the event be created here? (vs Ui)
                    UiInput::Event event;
                    event.id        = i;
                    event.timeMs    = timeMs;
                    
                    events.append(event);
                }
                
                myStateLog[i].isActive      = isActive;
                myStateLog[i].timeStampMs   = timeMs;
            }
        }
    }
}
示例#4
0
//------------------------------------------------------------------------------
UiInput::Action UiInput::getEventAction(const id_t eventId)
{
    if (IS_VALID_POINTER(myEventBehaviors))
    {
        return myEventBehaviors[eventId].action;
    }
    
    return ACTION_NONE;
}
示例#5
0
//------------------------------------------------------------------------------
UiInput::Error RotarySwitch::driverEnable(const bool enable)
{
    for (int i = 0; i < ARRAY_SIZE(myEnableLines); i++)
    {
        EnableLine* enableLine = myEnableLines[i];
        
        if (IS_VALID_POINTER(enableLine))
        {
            enableLine->enable(enable);
        }
    }
    
    return ERROR_NONE;
}
示例#6
0
//------------------------------------------------------------------------------
Timer::Error TimerStm32f4xx::driverEnable(const bool enable)
{
    if (IS_VALID_POINTER(myGpioPin))
    {
        myGpioPin->enable(enable);
        
        if (enable)
        {
            // Generic GpioPin configuration
            GpioPin::Config gpioConfig;
            gpioConfig.mode     = GpioPin::MODE_ALTERNATE_FUNCTION;
//            gpioConfig.resistor = GpioPin::RESISTOR_NONE;
            gpioConfig.resistor = GpioPin::RESISTOR_PULL_DOWN;
            
            myGpioPin->configure(gpioConfig);
            
            // Specific GpioPinStm32f4xx configuration
            GpioStm32f4xx::Config gpioDriverConfig;
            gpioDriverConfig.alternateFunction  = alternateFunctionMap[myId];
            gpioDriverConfig.outputSpeed        = gpioSpeed;
            
            myGpioPin->configureDriver(gpioDriverConfig);
        }
    }
    
    switch (myId)
    {
        case ID_1:
        // Fall through
        case ID_8:
        // Fall through
        case ID_9:
        // Fall through
        case ID_10:
        // Fall through
        case ID_11:
        {
            // APB2
            RCC_APB2PeriphClockCmd(clockMap[myId], (FunctionalState) enable);
            
            break;
        }
        case ID_2:
        // Fall through
        case ID_3:
        // Fall through
        case ID_4:
        // Fall through
        case ID_5:
        // Fall through
        case ID_6:
        // Fall through
        case ID_7:
        // Fall through
        case ID_12:
        // Fall through
        case ID_13:
        // Fall through
        case ID_14:
        {
            // APB1
            RCC_APB1PeriphClockCmd(clockMap[myId], (FunctionalState) enable);
            
            break;
        }
    }
    
    TIM_Cmd(myTimer, (FunctionalState) enable);
    
    return ERROR_NONE;
}
示例#7
0
int compress_mem_chunk(
    const uint64_t mem_read_start, 
    const uint64_t mem_read_length, 
    const uint64_t mem_output_start, 
    uint64_t* const mem_output_length, 
    struct compress_header** const header_address)
{
    int return_code = 0;

    printf("Chunk %016" PRIx64 " - %016" PRIx64 " @ 0x%" PRIx64 " (%s)...\n", 
        mem_read_start, 
        mem_read_start + mem_read_length, 
        mem_output_start,
        get_mem_size(*mem_output_length)
    );

    unsigned char src_buffer[128];
    unsigned char dst_buffer[DST_BUFFER_SIZE];
    
    uint64_t mem_read_pointer = mem_read_start;
    uint64_t mem_output_pointer = mem_output_start;

    context_sha256_t sha256_ctx;

    z_stream stream_context;

    stream_context.zalloc = (alloc_func)0;
    stream_context.zfree = (free_func)0;
    stream_context.opaque = (voidpf)0;

    stream_context.next_out = dst_buffer;
    stream_context.avail_out = DST_BUFFER_SIZE;

    if (deflateInit(&stream_context, Z_BEST_COMPRESSION) != Z_OK) {
        printf("Zlib init failed!\n");
        return RETURN_CODE_FAILED;
    }

    sha256_starts(&sha256_ctx);

    // Set header pointer to begin of the output buffer
    *header_address = (struct compress_header*) mem_output_pointer;
    mem_output_pointer += sizeof(struct compress_header);

    uint64_t bytes_read = 0;
    uint64_t bytes_write = 0;
    uint64_t bytes_skipped = 0;

    for (; 
        mem_read_pointer < mem_read_start + mem_read_length && 
        mem_output_pointer + DST_BUFFER_SIZE < mem_output_start + *mem_output_length && 
        IS_VALID_POINTER(mem_read_pointer);
        mem_read_pointer += sizeof(int)) 
    {
        bool buffer_underrun = 0;
        int data;

        if (stream_context.avail_out < 100) {
            // We have less than 100 bytes in our scratchpad...
            // There are basicly 2 options left. Skip some data or crash.
            // Most likely is skipping some data the less evil of the two

            if (!buffer_underrun) {
                printf("WARNING: Buffer underrun!\n");

                buffer_underrun = 1;
            }

            data = 0;

            bytes_skipped += sizeof(int);            
        }
        else if (is_readable_mem_address(mem_read_pointer)) {
            data = *((int*)mem_read_pointer);

            bytes_read += sizeof(int);

            buffer_underrun = 0;
        }
        else {
            data = 0;

            bytes_skipped += sizeof(int);
        }

        sha256_update(&sha256_ctx, (uint8_t*)&data, sizeof(int));

        //The input is not always 100% used, so use a small buffer for the few cases a couple of bytes are left
        *(int*)(src_buffer + stream_context.avail_in) = data;

        stream_context.next_in = src_buffer;
        stream_context.avail_in += sizeof(int);

        if (deflate(&stream_context, Z_NO_FLUSH) != Z_OK) {
            printf("Memory compression failed!\n");
            
            return_code = RETURN_CODE_FAILED;
            goto out;
        }

        if (stream_context.avail_out < (DST_BUFFER_SIZE - 100)) {
            unsigned short bytes_waiting = DST_BUFFER_SIZE - stream_context.avail_out;

            if ((mem_output_pointer + bytes_waiting) < mem_read_pointer || mem_read_start + mem_read_length <= mem_output_start) { 
                // Make sure we stay behind the read pointer
                uint64_t mem_output_length_remaing = *mem_output_length - (mem_output_pointer - mem_output_start);

                if (write_buffer_to_buffer(dst_buffer, bytes_waiting, mem_output_pointer, &mem_output_length_remaing) < 0 || 
                    mem_output_length_remaing == 0)
                {
                    printf("Fatal error!\n");
                    
                    return_code = RETURN_CODE_FAILED;
                    goto out;
                }

                mem_output_pointer += mem_output_length_remaing;
                bytes_write += bytes_waiting;

                stream_context.next_out = dst_buffer;
                stream_context.avail_out = DST_BUFFER_SIZE;
            }
        }

        if (stream_context.avail_out == 0) {
            printf("Memory compression failed! No space left in buffer\n");
            printf("Read pointer %016" PRIx64 " Output pointer %016" PRIx64 " length %x\n", 
                mem_read_pointer, 
                mem_output_pointer, 
                (DST_BUFFER_SIZE - stream_context.avail_out)
            );
            
            return_code = RETURN_CODE_FAILED;
            goto out;
        }
    }

    if (IS_32BIT() && mem_read_pointer > ~0u) {
        printf("WARNING: Only lower 32 bit of memory is compressed!\n");
    }

    int deflate_status;
    do {
        deflate_status = deflate(&stream_context, Z_FINISH);

        if (deflate_status != Z_OK && deflate_status != Z_STREAM_END) {
            printf("Memory compression failed to finish!\n");
            
            return_code = RETURN_CODE_FAILED;
            goto out;
        }

        unsigned short bytes_waiting = DST_BUFFER_SIZE - stream_context.avail_out;

        if ((mem_output_pointer + bytes_waiting) >= mem_read_pointer && mem_output_start <= mem_read_start) {
            printf("WARNING: Output buffer will overwrite not read data!\n");
            printf("Read pointer %016" PRIx64 " Output pointer %016" PRIx64 " length %x\n", 
                mem_read_pointer, 
                mem_output_pointer, 
                (DST_BUFFER_SIZE - stream_context.avail_out)
            );
            
            return_code = RETURN_CODE_FAILED;
            goto out;
        }

        uint64_t mem_output_length_remaing = *mem_output_length - (mem_output_pointer - mem_output_start);

        if (write_buffer_to_buffer(dst_buffer, bytes_waiting, mem_output_pointer, &mem_output_length_remaing) < 0 || 
            mem_output_length_remaing == 0)
        {
            printf("Fatal error!\n");
            
            return_code = RETURN_CODE_FAILED;
            goto out;
        }

        mem_output_pointer += mem_output_length_remaing;
        bytes_write += bytes_waiting;

        stream_context.next_out = dst_buffer;
        stream_context.avail_out = DST_BUFFER_SIZE;
    }
    while(deflate_status == Z_OK);

    if (deflateEnd(&stream_context) != Z_OK) {
        printf("Compression state failure!\n");
        
        return_code = RETURN_CODE_FAILED;
        goto out;
    }

out:

    //Marker so it can be found back
    (*header_address)->marker[0] = 'M';
    (*header_address)->marker[1] = 'E';
    (*header_address)->marker[2] = 'M';
    (*header_address)->marker[3] = 0xf1;
    (*header_address)->marker[4] = 0x88;
    (*header_address)->marker[5] = 0x15;
    (*header_address)->marker[6] = 0x08;
    (*header_address)->marker[7] = 0x5c;

    (*header_address)->start_address = mem_read_start;
    (*header_address)->end_address = mem_read_pointer - 1;
    (*header_address)->compressed_length = bytes_write;
    (*header_address)->uncompressed_length = bytes_read + bytes_skipped;
    (*header_address)->skipped_length = bytes_skipped;

    sha256_finish(&sha256_ctx, (*header_address)->checksum);

    *mem_output_length = mem_output_pointer - mem_output_start;

    g_chunks++;

    return return_code;
}