void VIA::ViewGetLayers( int aLayers[], int& aCount ) const
{
// Just show it on common via & via holes layers
aLayers[0] = ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE );
aLayers[1] = ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE );
aCount = 2;
}
void TEXTE_MODULE::ViewGetLayers( int aLayers[], int& aCount ) const
{
if( m_NoShow ) // Hidden text
{
aLayers[0] = ITEM_GAL_LAYER( MOD_TEXT_INVISIBLE );
}
else
{
switch( m_Type )
{
case TEXT_is_REFERENCE:
aLayers[0] = ITEM_GAL_LAYER( MOD_REFERENCES_VISIBLE );
break;
case TEXT_is_VALUE:
aLayers[0] = ITEM_GAL_LAYER( MOD_VALUES_VISIBLE );
break;
default:
switch( GetParent()->GetLayer() )
{
case LAYER_N_BACK:
aLayers[0] = ITEM_GAL_LAYER( MOD_TEXT_BK_VISIBLE ); // how about SILKSCREEN_N_BACK?
break;
case LAYER_N_FRONT:
aLayers[0] = ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ); // how about SILKSCREEN_N_FRONT?
break;
}
break;
}
}
aCount = 1;
}
void VIA::ViewGetLayers( int aLayers[], int& aCount ) const
{
aLayers[0] = ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE );
aCount = 2;
// Just show it on common via & via holes layers
switch( GetViaType() )
{
case VIA_THROUGH:
aLayers[1] = ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE );
break;
case VIA_BLIND_BURIED:
aLayers[1] = ITEM_GAL_LAYER( VIA_BBLIND_VISIBLE );
aLayers[2] = m_Layer;
aLayers[3] = m_BottomLayer;
aCount += 2;
break;
case VIA_MICROVIA:
aLayers[1] = ITEM_GAL_LAYER( VIA_MICROVIA_VISIBLE );
break;
default:
assert( false );
break;
}
}
void PCB_EDIT_FRAME::syncLayerVisibilities()
{
m_Layers->SyncLayerVisibilities();
KIGFX::VIEW* view = GetGalCanvas()->GetView();
// Load layer & elements visibility settings
for( LAYER_NUM i = 0; i < NB_LAYERS; ++i )
{
view->SetLayerVisible( i, m_Pcb->IsLayerVisible( i ) );
// Synchronize netname layers as well
if( IsCopperLayer( i ) )
view->SetLayerVisible( GetNetnameLayer( i ), m_Pcb->IsLayerVisible( i ) );
}
for( LAYER_NUM i = 0; i < END_PCB_VISIBLE_LIST; ++i )
{
view->SetLayerVisible( ITEM_GAL_LAYER( i ), m_Pcb->IsElementVisible( i ) );
}
// Enable some layers that are GAL specific
view->SetLayerVisible( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), true );
view->SetLayerVisible( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), true );
view->SetLayerVisible( ITEM_GAL_LAYER( WORKSHEET ), true );
view->SetLayerVisible( ITEM_GAL_LAYER( GP_OVERLAY ), true );
}
void PCB_DRAW_PANEL_GAL::SetTopLayer( LAYER_ID aLayer )
{
m_view->ClearTopLayers();
setDefaultLayerOrder();
m_view->SetTopLayer( aLayer );
// Layers that should always have on-top attribute enabled
const LAYER_NUM layers[] = {
ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ),
ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
ITEM_GAL_LAYER( GP_OVERLAY ), ITEM_GAL_LAYER( RATSNEST_VISIBLE ), Dwgs_User,
ITEM_GAL_LAYER( DRC_VISIBLE )
};
for( unsigned int i = 0; i < sizeof( layers ) / sizeof( LAYER_NUM ); ++i )
m_view->SetTopLayer( layers[i] );
// Extra layers that are brought to the top if a F.* or B.* is selected
const LAYER_NUM frontLayers[] = {
F_Cu, F_Adhes, F_Paste, F_SilkS, F_Mask, F_CrtYd, F_Fab, ITEM_GAL_LAYER( PAD_FR_VISIBLE ),
NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), NETNAMES_GAL_LAYER( F_Cu ), -1
};
const LAYER_NUM backLayers[] = {
B_Cu, B_Adhes, B_Paste, B_SilkS, B_Mask, B_CrtYd, B_Fab, ITEM_GAL_LAYER( PAD_BK_VISIBLE ),
NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), NETNAMES_GAL_LAYER( B_Cu ), -1
};
const LAYER_NUM* extraLayers = NULL;
// Bring a few more extra layers to the top depending on the selected board side
if( IsFrontLayer( aLayer ) )
extraLayers = frontLayers;
else if( IsBackLayer( aLayer ) )
extraLayers = backLayers;
if( extraLayers )
{
const LAYER_NUM* l = extraLayers;
while( *l >= 0 )
m_view->SetTopLayer( *l++ );
// Move the active layer to the top
if( !IsCopperLayer( aLayer ) )
m_view->SetLayerOrder( aLayer, m_view->GetLayerOrder( GAL_LAYER_ORDER[0] ) );
}
else if( IsCopperLayer( aLayer ) )
{
// Display labels for copper layers on the top
m_view->SetTopLayer( GetNetnameLayer( aLayer ) );
}
m_view->UpdateAllLayersOrder();
}
void D_PAD::ViewGetLayers( int aLayers[], int& aCount ) const
{
aCount = 0;
// These types of pads contain a hole
if( m_Attribute == PAD_STANDARD || m_Attribute == PAD_HOLE_NOT_PLATED )
aLayers[aCount++] = ITEM_GAL_LAYER( PADS_HOLES_VISIBLE );
if( IsOnLayer( F_Cu ) && IsOnLayer( B_Cu ) )
{
// Multi layer pad
aLayers[aCount++] = ITEM_GAL_LAYER( PADS_VISIBLE );
aLayers[aCount++] = NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE );
}
else if( IsOnLayer( F_Cu ) )
{
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_FR_VISIBLE );
aLayers[aCount++] = NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE );
}
else if( IsOnLayer( B_Cu ) )
{
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_BK_VISIBLE );
aLayers[aCount++] = NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE );
}
if( IsOnLayer( F_Mask ) )
aLayers[aCount++] = F_Mask;
if( IsOnLayer( B_Mask ) )
aLayers[aCount++] = B_Mask;
if( IsOnLayer( F_Paste ) )
aLayers[aCount++] = F_Paste;
if( IsOnLayer( B_Paste ) )
aLayers[aCount++] = B_Paste;
if( IsOnLayer( B_Adhes ) )
aLayers[aCount++] = B_Adhes;
if( IsOnLayer( F_Adhes ) )
aLayers[aCount++] = F_Adhes;
#ifdef __WXDEBUG__
if( aCount == 0 ) // Should not occur
{
wxLogWarning( wxT("D_PAD::ViewGetLayers():PAD has no layer") );
}
#endif
}
void D_PAD::ViewGetLayers( int aLayers[], int& aCount ) const
{
aCount = 0;
// These types of pads contain a hole
if( m_Attribute == PAD_ATTRIB_STANDARD || m_Attribute == PAD_ATTRIB_HOLE_NOT_PLATED )
aLayers[aCount++] = ITEM_GAL_LAYER( PADS_HOLES_VISIBLE );
if( IsOnLayer( F_Cu ) && IsOnLayer( B_Cu ) )
{
// Multi layer pad
aLayers[aCount++] = ITEM_GAL_LAYER( PADS_VISIBLE );
aLayers[aCount++] = NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE );
}
else if( IsOnLayer( F_Cu ) )
{
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_FR_VISIBLE );
aLayers[aCount++] = NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE );
}
else if( IsOnLayer( B_Cu ) )
{
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_BK_VISIBLE );
aLayers[aCount++] = NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE );
}
// Check non-copper layers. This list should include all the layers that the
// footprint editor allows a pad to be placed on.
static const LAYER_ID layers_mech[] = { F_Mask, B_Mask, F_Paste, B_Paste,
F_Adhes, B_Adhes, F_SilkS, B_SilkS, Dwgs_User, Eco1_User, Eco2_User };
BOOST_FOREACH( LAYER_ID each_layer, layers_mech )
{
if( IsOnLayer( each_layer ) )
aLayers[aCount++] = each_layer;
}
#ifdef __WXDEBUG__
if( aCount == 0 ) // Should not occur
{
wxString msg;
msg.Printf( wxT( "footprint %s, pad %s: could not find valid layer for pad" ),
GetParent() ? GetParent()->GetReference() : "<null>",
GetPadName().IsEmpty() ? "(unnamed)" : GetPadName() );
wxLogWarning( msg );
}
#endif
}
void PCB_DRAW_PANEL_GAL::SetHighContrastLayer( LAYER_ID aLayer )
{
// Set display settings for high contrast mode
KIGFX::RENDER_SETTINGS* rSettings = m_view->GetPainter()->GetSettings();
SetTopLayer( aLayer );
rSettings->ClearActiveLayers();
rSettings->SetActiveLayer( aLayer );
if( IsCopperLayer( aLayer ) )
{
// Bring some other layers to the front in case of copper layers and make them colored
// fixme do not like the idea of storing the list of layers here,
// should be done in some other way I guess..
LAYER_NUM layers[] = {
GetNetnameLayer( aLayer ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ),
ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
ITEM_GAL_LAYER( GP_OVERLAY ), ITEM_GAL_LAYER( RATSNEST_VISIBLE )
};
for( unsigned int i = 0; i < sizeof( layers ) / sizeof( LAYER_NUM ); ++i )
rSettings->SetActiveLayer( layers[i] );
// Pads should be shown too
if( aLayer == B_Cu )
{
rSettings->SetActiveLayer( ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
rSettings->SetActiveLayer( ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
rSettings->SetActiveLayer( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ) );
}
else if( aLayer == F_Cu )
{
rSettings->SetActiveLayer( ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
rSettings->SetActiveLayer( ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
rSettings->SetActiveLayer( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ) );
}
}
m_view->UpdateAllLayersColor();
}
void MODULE::ViewGetLayers( int aLayers[], int& aCount ) const
{
aCount = 2;
aLayers[0] = ITEM_GAL_LAYER( ANCHOR_VISIBLE );
switch( m_Layer )
{
default:
wxASSERT_MSG( false, "Illegal layer" ); // do you really have modules placed on other layers?
// pass through
case F_Cu:
aLayers[1] = ITEM_GAL_LAYER( MOD_FR_VISIBLE );
break;
case B_Cu:
aLayers[1] = ITEM_GAL_LAYER( MOD_BK_VISIBLE );
break;
}
}
unsigned int MODULE::ViewGetLOD( int aLayer ) const
{
int layer = ( m_Layer == F_Cu ) ? MOD_FR_VISIBLE :
( m_Layer == B_Cu ) ? MOD_BK_VISIBLE : ANCHOR_VISIBLE;
// Currently it is only for anchor layer
if( m_view->IsLayerVisible( ITEM_GAL_LAYER( layer ) ) )
return 30;
return std::numeric_limits<unsigned int>::max();
}
void MODULE::ViewGetLayers( int aLayers[], int& aCount ) const
{
aCount = 2;
aLayers[0] = ITEM_GAL_LAYER( ANCHOR_VISIBLE );
switch( m_Layer )
{
case F_Cu:
aLayers[1] = ITEM_GAL_LAYER( MOD_FR_VISIBLE );
break;
case B_Cu:
aLayers[1] = ITEM_GAL_LAYER( MOD_BK_VISIBLE );
break;
default:
assert( false ); // do you really have modules placed on inner layers?
break;
}
}
void SetView( KIGFX::VIEW *aView )
{
Clear();
delete m_items;
m_items = NULL;
m_view = aView;
if ( m_view == NULL )
return;
m_items = new KIGFX::VIEW_GROUP( m_view );
m_items->SetLayer( ITEM_GAL_LAYER( GP_OVERLAY ) );
m_view->Add( m_items );
m_items->ViewSetVisible( true );
}
void TEXTE_MODULE::ViewGetLayers( int aLayers[], int& aCount ) const
{
if( m_NoShow ) // Hidden text
aLayers[0] = ITEM_GAL_LAYER( MOD_TEXT_INVISIBLE );
//else if( IsFrontLayer( m_Layer ) )
//aLayers[0] = ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE );
//else if( IsBackLayer( m_Layer ) )
//aLayers[0] = ITEM_GAL_LAYER( MOD_TEXT_BK_VISIBLE );
else
aLayers[0] = GetLayer();
aCount = 1;
}
void EDA_DRAW_PANEL_GAL::onPaint( wxPaintEvent& WXUNUSED( aEvent ) )
{
m_pendingRefresh = false;
if( m_drawing )
return;
#ifdef PROFILE
prof_counter totalRealTime;
prof_start( &totalRealTime );
#endif /* PROFILE */
m_drawing = true;
KIGFX::PCB_RENDER_SETTINGS* settings = static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_painter->GetSettings() );
// Scrollbars broken in GAL on OSX
#ifndef __WXMAC__
m_viewControls->UpdateScrollbars();
#endif
m_view->UpdateItems();
m_gal->BeginDrawing();
m_gal->ClearScreen( settings->GetBackgroundColor() );
KIGFX::COLOR4D gridColor = settings->GetLayerColor( ITEM_GAL_LAYER( GRID_VISIBLE ) );
m_gal->SetGridColor( gridColor );
if( m_view->IsDirty() )
{
m_view->ClearTargets();
// Grid has to be redrawn only when the NONCACHED target is redrawn
if( m_view->IsTargetDirty( KIGFX::TARGET_NONCACHED ) )
m_gal->DrawGrid();
m_view->Redraw();
}
m_gal->DrawCursor( m_viewControls->GetCursorPosition() );
m_gal->EndDrawing();
#ifdef PROFILE
prof_end( &totalRealTime );
wxLogDebug( wxT( "EDA_DRAW_PANEL_GAL::onPaint(): %.1f ms" ), totalRealTime.msecs() );
#endif /* PROFILE */
m_lastRefresh = wxGetLocalTimeMillis();
m_drawing = false;
}
void PNS_ROUTER::SetView( KIGFX::VIEW* aView )
{
if( m_previewItems )
{
m_previewItems->FreeItems();
delete m_previewItems;
}
m_view = aView;
m_previewItems = new KIGFX::VIEW_GROUP( m_view );
m_previewItems->SetLayer( ITEM_GAL_LAYER( GP_OVERLAY ) );
m_view->Add( m_previewItems );
m_previewItems->ViewSetVisible( true );
}
void PCB_DRAW_PANEL_GAL::SyncLayersVisibility( const BOARD* aBoard )
{
// Load layer & elements visibility settings
for( LAYER_NUM i = 0; i < LAYER_ID_COUNT; ++i )
{
m_view->SetLayerVisible( i, aBoard->IsLayerVisible( LAYER_ID( i ) ) );
// Synchronize netname layers as well
if( IsCopperLayer( i ) )
m_view->SetLayerVisible( GetNetnameLayer( i ), aBoard->IsLayerVisible( LAYER_ID( i ) ) );
}
for( LAYER_NUM i = 0; i < END_PCB_VISIBLE_LIST; ++i )
{
m_view->SetLayerVisible( ITEM_GAL_LAYER( i ), aBoard->IsElementVisible( i ) );
}
// Enable some layers that are GAL specific
m_view->SetLayerVisible( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), true );
m_view->SetLayerVisible( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), true );
m_view->SetLayerVisible( ITEM_GAL_LAYER( WORKSHEET ), true );
m_view->SetLayerVisible( ITEM_GAL_LAYER( GP_OVERLAY ), true );
}
void PCB_DRAW_PANEL_GAL::SetTopLayer( LAYER_ID aLayer )
{
m_view->ClearTopLayers();
m_view->SetTopLayer( aLayer );
if( IsCopperLayer( aLayer ) )
{
// Bring some other layers to the front in case of copper layers and make them colored
// fixme do not like the idea of storing the list of layers here,
// should be done in some other way I guess..
LAYER_NUM layers[] = {
GetNetnameLayer( aLayer ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ),
ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
ITEM_GAL_LAYER( GP_OVERLAY ), ITEM_GAL_LAYER( RATSNEST_VISIBLE ), Dwgs_User,
ITEM_GAL_LAYER( DRC_VISIBLE )
};
for( unsigned int i = 0; i < sizeof( layers ) / sizeof( LAYER_NUM ); ++i )
{
m_view->SetTopLayer( layers[i] );
}
// Pads should be shown too
if( aLayer == B_Cu )
{
m_view->SetTopLayer( ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetTopLayer( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ) );
}
else if( aLayer == F_Cu )
{
m_view->SetTopLayer( ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetTopLayer( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ) );
}
}
m_view->UpdateAllLayersOrder();
}
void PNS_KICAD_IFACE::SetView( KIGFX::VIEW *aView )
{
wxLogTrace( "PNS", "SetView %p", aView );
if( m_previewItems )
{
m_previewItems->FreeItems();
delete m_previewItems;
}
m_view = aView;
m_previewItems = new KIGFX::VIEW_GROUP( m_view );
m_previewItems->SetLayer( ITEM_GAL_LAYER( GP_OVERLAY ) );
m_view->Add( m_previewItems );
delete m_debugDecorator;
m_debugDecorator = new PNS_PCBNEW_DEBUG_DECORATOR();
m_debugDecorator->SetView( m_view );
}
void PCB_EDIT_FRAME::setTopLayer( LAYER_NUM aLayer )
{
// Set display settings for high contrast mode
KIGFX::VIEW* view = GetGalCanvas()->GetView();
view->ClearTopLayers();
view->SetTopLayer( aLayer );
if( IsCopperLayer( aLayer ) )
{
// Bring some other layers to the front in case of copper layers and make them colored
// fixme do not like the idea of storing the list of layers here,
// should be done in some other way I guess..
LAYER_NUM layers[] = {
GetNetnameLayer( aLayer ), ITEM_GAL_LAYER( VIAS_VISIBLE ),
ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
ITEM_GAL_LAYER( GP_OVERLAY ), ITEM_GAL_LAYER( RATSNEST_VISIBLE ), DRAW_N
};
for( unsigned int i = 0; i < sizeof( layers ) / sizeof( LAYER_NUM ); ++i )
{
view->SetTopLayer( layers[i] );
}
// Pads should be shown too
if( aLayer == FIRST_COPPER_LAYER )
{
view->SetTopLayer( ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetTopLayer( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ) );
}
else if( aLayer == LAST_COPPER_LAYER )
{
view->SetTopLayer( ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetTopLayer( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ) );
}
}
view->UpdateAllLayersOrder();
}
void PCB_LAYER_WIDGET::OnRenderEnable( int aId, bool isEnabled )
{
BOARD* brd = myframe->GetBoard();
brd->SetElementVisibility( aId, isEnabled );
EDA_DRAW_PANEL_GAL* galCanvas = myframe->GetGalCanvas();
if( galCanvas )
{
if( aId == GRID_VISIBLE )
{
galCanvas->GetGAL()->SetGridVisibility( myframe->IsGridVisible() );
galCanvas->GetView()->MarkTargetDirty( KIGFX::TARGET_NONCACHED );
}
else
galCanvas->GetView()->SetLayerVisible( ITEM_GAL_LAYER( aId ), isEnabled );
}
if( galCanvas && myframe->IsGalCanvasActive() )
galCanvas->Refresh();
else
myframe->GetCanvas()->Refresh();
}
void D_PAD::ViewGetLayers( int aLayers[], int& aCount ) const
{
aCount = 0;
// These types of pads contain a hole
if( m_Attribute == PAD_STANDARD || m_Attribute == PAD_HOLE_NOT_PLATED )
aLayers[aCount++] = ITEM_GAL_LAYER( PADS_HOLES_VISIBLE );
if( IsOnLayer( LAYER_N_FRONT ) && IsOnLayer( LAYER_N_BACK ) )
{
// Multi layer pad
aLayers[aCount++] = ITEM_GAL_LAYER( PADS_VISIBLE );
aLayers[aCount++] = ITEM_GAL_LAYER( PADS_NETNAMES_VISIBLE );
aLayers[aCount++] = SOLDERMASK_N_FRONT;
aLayers[aCount++] = SOLDERMASK_N_BACK;
aLayers[aCount++] = SOLDERPASTE_N_FRONT;
aLayers[aCount++] = SOLDERPASTE_N_BACK;
}
else if( IsOnLayer( LAYER_N_FRONT ) )
{
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_FR_VISIBLE );
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE );
aLayers[aCount++] = SOLDERMASK_N_FRONT;
aLayers[aCount++] = SOLDERPASTE_N_FRONT;
}
else if( IsOnLayer( LAYER_N_BACK ) )
{
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_BK_VISIBLE );
aLayers[aCount++] = ITEM_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE );
aLayers[aCount++] = SOLDERMASK_N_BACK;
aLayers[aCount++] = SOLDERPASTE_N_BACK;
}
#ifdef __WXDEBUG__
else // Should not occur
{
wxLogWarning( wxT("D_PAD::ViewGetLayers():PAD on layer different than FRONT/BACK") );
}
#endif
}
unsigned int TEXTE_MODULE::ViewGetLOD( int aLayer ) const
{
const int MAX = std::numeric_limits<unsigned int>::max();
if( !m_view )
return 0;
if( m_Type == TEXT_is_VALUE && !m_view->IsLayerVisible( ITEM_GAL_LAYER( MOD_VALUES_VISIBLE ) ) )
return MAX;
if( m_Type == TEXT_is_REFERENCE && !m_view->IsLayerVisible( ITEM_GAL_LAYER( MOD_REFERENCES_VISIBLE ) ) )
return MAX;
if( IsFrontLayer( m_Layer ) && ( !m_view->IsLayerVisible( ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ) ) ||
!m_view->IsLayerVisible( ITEM_GAL_LAYER( MOD_FR_VISIBLE ) ) ) )
return MAX;
if( IsBackLayer( m_Layer ) && ( !m_view->IsLayerVisible( ITEM_GAL_LAYER( MOD_TEXT_BK_VISIBLE ) ) ||
!m_view->IsLayerVisible( ITEM_GAL_LAYER( MOD_BK_VISIBLE ) ) ) )
return MAX;
return 0;
}
void FOOTPRINT_EDIT_FRAME::SetElementVisibility( int aElement, bool aNewState )
{
GetGalCanvas()->GetView()->SetLayerVisible( ITEM_GAL_LAYER( aElement ), aNewState );
GetBoard()->SetElementVisibility( aElement, aNewState );
m_Layers->SetRenderState( aElement, aNewState );
}
PCB_DRAW_PANEL_GAL::PCB_DRAW_PANEL_GAL( wxWindow* aParentWindow, wxWindowID aWindowId,
const wxPoint& aPosition, const wxSize& aSize,
GalType aGalType ) :
EDA_DRAW_PANEL_GAL( aParentWindow, aWindowId, aPosition, aSize, aGalType )
{
m_worksheet = NULL;
m_ratsnest = NULL;
// Set rendering order and properties of layers
for( LAYER_NUM i = 0; (unsigned) i < sizeof(GAL_LAYER_ORDER) / sizeof(LAYER_NUM); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
m_view->SetLayerOrder( layer, i );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
m_view->SetRequired( GetNetnameLayer( layer ), layer );
m_view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
m_view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
}
}
m_view->SetLayerTarget( ITEM_GAL_LAYER( ANCHOR_VISIBLE ), KIGFX::TARGET_NONCACHED );
// Some more required layers settings
m_view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Adhes, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Paste, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Mask, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Adhes, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Paste, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Mask, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PAD_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PAD_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
// Load display options (such as filled/outline display of items)
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( DisplayOpt );
}
void MARKER_PCB::ViewGetLayers( int aLayers[], int& aCount ) const
{
aCount = 1;
aLayers[0] = ITEM_GAL_LAYER( DRC_VISIBLE );
}
void PCB_BASE_FRAME::LoadSettings()
{
wxASSERT( wxGetApp().GetSettings() != NULL );
wxConfig* cfg = wxGetApp().GetSettings();
EDA_DRAW_FRAME::LoadSettings();
// Ensure grid id is an existent grid id:
if( (m_LastGridSizeId <= 0) ||
(m_LastGridSizeId > (ID_POPUP_GRID_USER - ID_POPUP_GRID_LEVEL_1000)) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_500 - ID_POPUP_GRID_LEVEL_1000;
cfg->Read( m_FrameName + UserGridSizeXEntry, &m_UserGridSize.x, 0.01 );
cfg->Read( m_FrameName + UserGridSizeYEntry, &m_UserGridSize.y, 0.01 );
long itmp;
cfg->Read( m_FrameName + UserGridUnitsEntry, &itmp, ( long )INCHES );
m_UserGridUnit = (EDA_UNITS_T) itmp;
cfg->Read( m_FrameName + DisplayPadFillEntry, &m_DisplayPadFill, true );
cfg->Read( m_FrameName + DisplayViaFillEntry, &m_DisplayViaFill, true );
cfg->Read( m_FrameName + DisplayPadNumberEntry, &m_DisplayPadNum, true );
cfg->Read( m_FrameName + DisplayModuleEdgeEntry, &m_DisplayModEdge, ( long )FILLED );
cfg->Read( m_FrameName + FastGrid1Entry, &itmp, ( long )0);
m_FastGrid1 = itmp;
cfg->Read( m_FrameName + FastGrid2Entry, &itmp, ( long )0);
m_FastGrid2 = itmp;
if( m_DisplayModEdge < LINE || m_DisplayModEdge > SKETCH )
m_DisplayModEdge = FILLED;
cfg->Read( m_FrameName + DisplayModuleTextEntry, &m_DisplayModText, ( long )FILLED );
if( m_DisplayModText < LINE || m_DisplayModText > SKETCH )
m_DisplayModText = FILLED;
// Apply display settings for GAL
KIGFX::VIEW* view = GetGalCanvas()->GetView();
// Set rendering order and properties of layers
for( LAYER_NUM i = 0; (unsigned) i < sizeof(GAL_LAYER_ORDER) / sizeof(LAYER_NUM); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
view->SetLayerOrder( layer, i );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
view->SetRequired( GetNetnameLayer( layer ), layer );
view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
}
}
// Some more required layers settings
view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIAS_VISIBLE ) );
view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( ADHESIVE_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( SOLDERPASTE_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( SOLDERMASK_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( ADHESIVE_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( SOLDERPASTE_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( SOLDERMASK_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
// Apply layer coloring scheme & display options
if( view->GetPainter() )
{
KIGFX::PCB_RENDER_SETTINGS* settings = new KIGFX::PCB_RENDER_SETTINGS();
// Load layers' colors from PCB data
settings->ImportLegacyColors( m_Pcb->GetColorsSettings() );
view->GetPainter()->ApplySettings( settings );
// Load display options (such as filled/outline display of items)
settings->LoadDisplayOptions( DisplayOpt );
}
// WxWidgets 2.9.1 seems call setlocale( LC_NUMERIC, "" )
// when reading doubles in config,
// but forget to back to current locale. So we call SetLocaleTo_Default
SetLocaleTo_Default( );
}
PCB_DRAW_PANEL_GAL::PCB_DRAW_PANEL_GAL( wxWindow* aParentWindow, wxWindowID aWindowId,
const wxPoint& aPosition, const wxSize& aSize,
GalType aGalType ) :
EDA_DRAW_PANEL_GAL( aParentWindow, aWindowId, aPosition, aSize, aGalType )
{
m_worksheet = NULL;
m_ratsnest = NULL;
// Set rendering order and properties of layers
for( LAYER_NUM i = 0; (unsigned) i < sizeof(GAL_LAYER_ORDER) / sizeof(LAYER_NUM); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
m_view->SetLayerOrder( layer, i );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
m_view->SetRequired( GetNetnameLayer( layer ), layer );
m_view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
m_view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( layer );
}
}
m_view->SetLayerTarget( ITEM_GAL_LAYER( ANCHOR_VISIBLE ), KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( ANCHOR_VISIBLE ) );
// Some more required layers settings
m_view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
// Front modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Adhes, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Paste, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Mask, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_CrtYd, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( F_Fab, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
// Back modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Adhes, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Paste, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Mask, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_CrtYd, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( B_Fab, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GP_OVERLAY ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( RATSNEST_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( WORKSHEET ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GRID_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( DRC_VISIBLE ) );
// Load display options (such as filled/outline display of items).
// Can be made only if the parent windos is a EDA_DRAW_FRAME (or a derived class)
// which is not always the case (namely when it is used from a wxDialog like the pad editor)
EDA_DRAW_FRAME* frame = dynamic_cast<EDA_DRAW_FRAME*>( aParentWindow );
if( frame )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*) frame->GetDisplayOptions();
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( displ_opts );
}
}
// Configuration entry names.
static const wxString UserGridSizeXEntry( wxT( "PcbUserGrid_X" ) );
static const wxString UserGridSizeYEntry( wxT( "PcbUserGrid_Y" ) );
static const wxString UserGridUnitsEntry( wxT( "PcbUserGrid_Unit" ) );
static const wxString DisplayPadFillEntry( wxT( "DiPadFi" ) );
static const wxString DisplayViaFillEntry( wxT( "DiViaFi" ) );
static const wxString DisplayPadNumberEntry( wxT( "DiPadNu" ) );
static const wxString DisplayModuleEdgeEntry( wxT( "DiModEd" ) );
static const wxString DisplayModuleTextEntry( wxT( "DiModTx" ) );
static const wxString FastGrid1Entry( wxT( "FastGrid1" ) );
static const wxString FastGrid2Entry( wxT( "FastGrid2" ) );
const LAYER_NUM PCB_BASE_FRAME::GAL_LAYER_ORDER[] =
{
ITEM_GAL_LAYER( GP_OVERLAY ),
NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
DRAW_N, COMMENT_N, ECO1_N, ECO2_N, EDGE_N,
UNUSED_LAYER_29, UNUSED_LAYER_30, UNUSED_LAYER_31,
ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ),
ITEM_GAL_LAYER( MOD_REFERENCES_VISIBLE), ITEM_GAL_LAYER( MOD_VALUES_VISIBLE ),
ITEM_GAL_LAYER( RATSNEST_VISIBLE ),
ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ),
ITEM_GAL_LAYER( VIAS_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ), SOLDERMASK_N_FRONT,
NETNAMES_GAL_LAYER( LAYER_16_NETNAMES_VISIBLE ), LAYER_N_FRONT,
SILKSCREEN_N_FRONT, SOLDERPASTE_N_FRONT, ADHESIVE_N_FRONT,
NETNAMES_GAL_LAYER( LAYER_15_NETNAMES_VISIBLE ), LAYER_N_15,
NETNAMES_GAL_LAYER( LAYER_14_NETNAMES_VISIBLE ), LAYER_N_14,
void PCB_DRAW_PANEL_GAL::setDefaultLayerDeps()
{
for( LAYER_NUM i = 0; (unsigned) i < sizeof( GAL_LAYER_ORDER ) / sizeof( LAYER_NUM ); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
m_view->SetRequired( GetNetnameLayer( layer ), layer );
m_view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
m_view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( layer );
}
}
m_view->SetLayerTarget( ITEM_GAL_LAYER( ANCHOR_VISIBLE ), KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( ANCHOR_VISIBLE ) );
// Some more required layers settings
m_view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
// Front modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Adhes, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Paste, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Mask, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_CrtYd, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( F_Fab, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
// Back modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Adhes, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Paste, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Mask, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_CrtYd, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( B_Fab, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GP_OVERLAY ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( RATSNEST_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( WORKSHEET ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GRID_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( DRC_VISIBLE ) );
}
#include <pcb_painter.h>
#include <worksheet_viewitem.h>
#include <ratsnest_viewitem.h>
#include <ratsnest_data.h>
#include <class_colors_design_settings.h>
#include <class_board.h>
#include <class_module.h>
#include <class_track.h>
#include <wxBasePcbFrame.h>
#include <boost/bind.hpp>
const LAYER_NUM GAL_LAYER_ORDER[] =
{
ITEM_GAL_LAYER( GP_OVERLAY ),
ITEM_GAL_LAYER( DRC_VISIBLE ),
NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
Dwgs_User, Cmts_User, Eco1_User, Eco2_User, Edge_Cuts,
ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ),
ITEM_GAL_LAYER( MOD_REFERENCES_VISIBLE), ITEM_GAL_LAYER( MOD_VALUES_VISIBLE ),
ITEM_GAL_LAYER( RATSNEST_VISIBLE ), ITEM_GAL_LAYER( ANCHOR_VISIBLE ),
ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ),
ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ), ITEM_GAL_LAYER( VIA_BBLIND_VISIBLE ),
ITEM_GAL_LAYER( VIA_MICROVIA_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ),
NETNAMES_GAL_LAYER( F_Cu ), F_Cu, F_Mask, F_SilkS, F_Paste, F_Adhes,