/**
Update the device path that describing a terminal device
based on the new BaudRate, Data Bits, parity and Stop Bits
set.
@param DevicePath terminal device's path
**/
VOID
ChangeVariableDevicePath (
IN OUT EFI_DEVICE_PATH_PROTOCOL *DevicePath
)
{
EFI_DEVICE_PATH_PROTOCOL *Node;
ACPI_HID_DEVICE_PATH *Acpi;
UART_DEVICE_PATH *Uart;
UINTN Com;
BM_TERMINAL_CONTEXT *NewTerminalContext;
BM_MENU_ENTRY *NewMenuEntry;
Node = DevicePath;
Node = NextDevicePathNode (Node);
Com = 0;
while (!IsDevicePathEnd (Node)) {
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
if (IsIsaSerialNode (Acpi)) {
CopyMem (&Com, &Acpi->UID, sizeof (UINT32));
}
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
NewMenuEntry = BOpt_GetMenuEntry (
&TerminalMenu,
Com
);
ASSERT (NewMenuEntry != NULL);
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
Uart = (UART_DEVICE_PATH *) Node;
CopyMem (
&Uart->BaudRate,
&NewTerminalContext->BaudRate,
sizeof (UINT64)
);
CopyMem (
&Uart->DataBits,
&NewTerminalContext->DataBits,
sizeof (UINT8)
);
CopyMem (
&Uart->Parity,
&NewTerminalContext->Parity,
sizeof (UINT8)
);
CopyMem (
&Uart->StopBits,
&NewTerminalContext->StopBits,
sizeof (UINT8)
);
}
Node = NextDevicePathNode (Node);
}
}
/**
Retrieve ACPI UID of UART from device path
@param Handle The handle for the UART device.
@param AcpiUid The ACPI UID on output.
@retval TRUE Find valid UID from device path
@retval FALSE Can't find
**/
BOOLEAN
RetrieveUartUid (
IN EFI_HANDLE Handle,
IN OUT UINT32 *AcpiUid
)
{
EFI_STATUS Status;
ACPI_HID_DEVICE_PATH *Acpi;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
Status = gBS->HandleProtocol (
Handle,
&gEfiDevicePathProtocolGuid,
(VOID **) &DevicePath
);
if (EFI_ERROR (Status)) {
return FALSE;
}
Acpi = NULL;
for (; !IsDevicePathEnd (DevicePath); DevicePath = NextDevicePathNode (DevicePath)) {
if ((DevicePathType (DevicePath) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (DevicePath) == MSG_UART_DP)) {
break;
}
//
// Acpi points to the node before the Uart node
//
Acpi = (ACPI_HID_DEVICE_PATH *) DevicePath;
}
if ((Acpi != NULL) && IsIsaSerialNode (Acpi)) {
if (AcpiUid != NULL) {
CopyMem (AcpiUid, &Acpi->UID, sizeof (UINT32));
}
return TRUE;
} else {
return FALSE;
}
}
/**
Update the multi-instance device path of Terminal Device based on
the global TerminalMenu. If ChangeTernimal is TRUE, the terminal
device path in the Terminal Device in TerminalMenu is also updated.
@param DevicePath The multi-instance device path.
@param ChangeTerminal TRUE, then device path in the Terminal Device
in TerminalMenu is also updated; FALSE, no update.
@return EFI_SUCCESS The function completes successfully.
**/
EFI_STATUS
ChangeTerminalDevicePath (
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath,
IN BOOLEAN ChangeTerminal
)
{
EFI_DEVICE_PATH_PROTOCOL *Node;
EFI_DEVICE_PATH_PROTOCOL *Node1;
ACPI_HID_DEVICE_PATH *Acpi;
UART_DEVICE_PATH *Uart;
UART_DEVICE_PATH *Uart1;
UINTN Com;
BM_TERMINAL_CONTEXT *NewTerminalContext;
BM_MENU_ENTRY *NewMenuEntry;
UART_FLOW_CONTROL_DEVICE_PATH *FlowControlNode;
Node = *DevicePath;
Node = NextDevicePathNode (Node);
Com = 0;
while (!IsDevicePathEnd (Node)) {
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
if (IsIsaSerialNode (Acpi)) {
CopyMem (&Com, &Acpi->UID, sizeof (UINT32));
}
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Com);
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
Uart = (UART_DEVICE_PATH *) Node;
CopyMem (
&Uart->BaudRate,
&NewTerminalContext->BaudRate,
sizeof (UINT64)
);
CopyMem (
&Uart->DataBits,
&NewTerminalContext->DataBits,
sizeof (UINT8)
);
CopyMem (
&Uart->Parity,
&NewTerminalContext->Parity,
sizeof (UINT8)
);
CopyMem (
&Uart->StopBits,
&NewTerminalContext->StopBits,
sizeof (UINT8)
);
FlowControlNode = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Node);
if (IsUartFlowControlNode (FlowControlNode)) {
FlowControlNode->FlowControlMap = NewTerminalContext->FlowControl;
} else {
//
// Append the Flow control device node when user enable flow control.
//
if (NewTerminalContext->FlowControl != 0) {
mFlowControlDevicePath.FlowControlMap = NewTerminalContext->FlowControl;
*DevicePath = AppendDevicePathNode (
*DevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) (&mFlowControlDevicePath)
);
}
}
//
// Change the device path in the ComPort
//
if (ChangeTerminal) {
Node1 = NewTerminalContext->DevicePath;
Node1 = NextDevicePathNode (Node1);
while (!IsDevicePathEnd (Node1)) {
if ((DevicePathType (Node1) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node1) == MSG_UART_DP)) {
Uart1 = (UART_DEVICE_PATH *) Node1;
CopyMem (
&Uart1->BaudRate,
&NewTerminalContext->BaudRate,
sizeof (UINT64)
);
CopyMem (
&Uart1->DataBits,
&NewTerminalContext->DataBits,
sizeof (UINT8)
);
CopyMem (
&Uart1->Parity,
&NewTerminalContext->Parity,
sizeof (UINT8)
);
CopyMem (
&Uart1->StopBits,
&NewTerminalContext->StopBits,
sizeof (UINT8)
);
break;
}
//
// end if
//
Node1 = NextDevicePathNode (Node1);
}
//
// end while
//
break;
}
}
Node = NextDevicePathNode (Node);
}
return EFI_SUCCESS;
}
/**
Test whether DevicePath is a valid Terminal
@param DevicePath DevicePath to be checked
@param Termi If DevicePath is valid Terminal, terminal type is returned.
@param Com If DevicePath is valid Terminal, Com Port type is returned.
@retval TRUE If DevicePath point to a Terminal.
@retval FALSE If DevicePath does not point to a Terminal.
**/
BOOLEAN
IsTerminalDevicePath (
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT TYPE_OF_TERMINAL *Termi,
OUT UINTN *Com
)
{
BOOLEAN IsTerminal;
EFI_DEVICE_PATH_PROTOCOL *Node;
VENDOR_DEVICE_PATH *Vendor;
UART_DEVICE_PATH *Uart;
ACPI_HID_DEVICE_PATH *Acpi;
IsTerminal = FALSE;
Uart = NULL;
Vendor = NULL;
Acpi = NULL;
for (Node = DevicePath; !IsDevicePathEnd (Node); Node = NextDevicePathNode (Node)) {
//
// Vendor points to the node before the End node
//
Vendor = (VENDOR_DEVICE_PATH *) Node;
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
Uart = (UART_DEVICE_PATH *) Node;
}
if (Uart == NULL) {
//
// Acpi points to the node before the UART node
//
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
}
}
if (Vendor == NULL ||
DevicePathType (Vendor) != MESSAGING_DEVICE_PATH ||
DevicePathSubType (Vendor) != MSG_VENDOR_DP ||
Uart == NULL) {
return FALSE;
}
//
// There are four kinds of Terminal types
// check to see whether this devicepath
// is one of that type
//
if (CompareGuid (&Vendor->Guid, &TerminalTypeGuid[0])) {
*Termi = TerminalTypePcAnsi;
IsTerminal = TRUE;
} else {
if (CompareGuid (&Vendor->Guid, &TerminalTypeGuid[1])) {
*Termi = TerminalTypeVt100;
IsTerminal = TRUE;
} else {
if (CompareGuid (&Vendor->Guid, &TerminalTypeGuid[2])) {
*Termi = TerminalTypeVt100Plus;
IsTerminal = TRUE;
} else {
if (CompareGuid (&Vendor->Guid, &TerminalTypeGuid[3])) {
*Termi = TerminalTypeVtUtf8;
IsTerminal = TRUE;
} else {
IsTerminal = FALSE;
}
}
}
}
if (!IsTerminal) {
return FALSE;
}
if ((Acpi != NULL) && IsIsaSerialNode (Acpi)) {
CopyMem (Com, &Acpi->UID, sizeof (UINT32));
} else {
return FALSE;
}
return TRUE;
}
/**
Update Com Ports attributes from DevicePath
@param DevicePath DevicePath that contains Com ports
@retval EFI_SUCCESS The update is successful.
@retval EFI_NOT_FOUND Can not find specific menu entry
**/
EFI_STATUS
UpdateComAttributeFromVariable (
EFI_DEVICE_PATH_PROTOCOL *DevicePath
)
{
EFI_DEVICE_PATH_PROTOCOL *Node;
EFI_DEVICE_PATH_PROTOCOL *SerialNode;
ACPI_HID_DEVICE_PATH *Acpi;
UART_DEVICE_PATH *Uart;
UART_DEVICE_PATH *Uart1;
UINTN TerminalNumber;
BM_MENU_ENTRY *NewMenuEntry;
BM_TERMINAL_CONTEXT *NewTerminalContext;
UINTN Index;
UART_FLOW_CONTROL_DEVICE_PATH *FlowControlNode;
BOOLEAN HasFlowControlNode;
HasFlowControlNode = FALSE;
Node = DevicePath;
Node = NextDevicePathNode (Node);
TerminalNumber = 0;
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
while (!IsDevicePathEnd (Node)) {
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
if (IsIsaSerialNode (Acpi)) {
CopyMem (&TerminalNumber, &Acpi->UID, sizeof (UINT32));
}
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
Uart = (UART_DEVICE_PATH *) Node;
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, TerminalNumber);
if (NULL == NewMenuEntry) {
return EFI_NOT_FOUND;
}
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
CopyMem (
&NewTerminalContext->BaudRate,
&Uart->BaudRate,
sizeof (UINT64)
);
CopyMem (
&NewTerminalContext->DataBits,
&Uart->DataBits,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->Parity,
&Uart->Parity,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->StopBits,
&Uart->StopBits,
sizeof (UINT8)
);
FlowControlNode = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Node);
if (IsUartFlowControlNode (FlowControlNode)) {
HasFlowControlNode = TRUE;
NewTerminalContext->FlowControl = (UINT8) ReadUnaligned32 (&FlowControlNode->FlowControlMap);
} else if (NewTerminalContext->FlowControl != 0) {
//
// No Flow Control device path node, assumption no Flow control
//
NewTerminalContext->FlowControl = 0;
}
SerialNode = NewTerminalContext->DevicePath;
SerialNode = NextDevicePathNode (SerialNode);
while (!IsDevicePathEnd (SerialNode)) {
if ((DevicePathType (SerialNode) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (SerialNode) == MSG_UART_DP)) {
//
// Update following device paths according to
// previous acquired uart attributes
//
Uart1 = (UART_DEVICE_PATH *) SerialNode;
CopyMem (
&Uart1->BaudRate,
&NewTerminalContext->BaudRate,
sizeof (UINT64)
);
CopyMem (
&Uart1->DataBits,
&NewTerminalContext->DataBits,
sizeof (UINT8)
);
CopyMem (
&Uart1->Parity,
&NewTerminalContext->Parity,
sizeof (UINT8)
);
CopyMem (
&Uart1->StopBits,
&NewTerminalContext->StopBits,
sizeof (UINT8)
);
FlowControlNode = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (SerialNode);
if (IsUartFlowControlNode (FlowControlNode)) {
FlowControlNode->FlowControlMap = NewTerminalContext->FlowControl;
} else {
if (HasFlowControlNode) {
mFlowControlDevicePath.FlowControlMap = NewTerminalContext->FlowControl;
NewTerminalContext->DevicePath = AppendDevicePathNode (
NewTerminalContext->DevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) (&mFlowControlDevicePath)
);
}
}
break;
}
SerialNode = NextDevicePathNode (SerialNode);
}
//
// end while
//
}
Node = NextDevicePathNode (Node);
}
//
// end while
//
}
return EFI_SUCCESS;
}
/**
Build a list containing all serial devices.
@retval EFI_SUCCESS The function complete successfully.
@retval EFI_UNSUPPORTED No serial ports present.
**/
EFI_STATUS
LocateSerialIo (
VOID
)
{
UINTN Index;
UINTN Index2;
UINTN NoHandles;
EFI_HANDLE *Handles;
EFI_STATUS Status;
ACPI_HID_DEVICE_PATH *Acpi;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
EFI_DEVICE_PATH_PROTOCOL *Node;
EFI_DEVICE_PATH_PROTOCOL *OutDevicePath;
EFI_DEVICE_PATH_PROTOCOL *InpDevicePath;
EFI_DEVICE_PATH_PROTOCOL *ErrDevicePath;
BM_MENU_ENTRY *NewMenuEntry;
BM_TERMINAL_CONTEXT *NewTerminalContext;
EFI_DEVICE_PATH_PROTOCOL *NewDevicePath;
VENDOR_DEVICE_PATH Vendor;
UINT32 FlowControl;
//
// Get all handles that have SerialIo protocol installed
//
InitializeListHead (&TerminalMenu.Head);
TerminalMenu.MenuNumber = 0;
Status = gBS->LocateHandleBuffer (
ByProtocol,
&gEfiSerialIoProtocolGuid,
NULL,
&NoHandles,
&Handles
);
if (EFI_ERROR (Status)) {
//
// No serial ports present
//
return EFI_UNSUPPORTED;
}
//
// Sort Uart handles array with Acpi->UID from low to high
// then Terminal menu can be built from low Acpi->UID to high Acpi->UID
//
SortedUartHandle (Handles, NoHandles);
for (Index = 0; Index < NoHandles; Index++) {
//
// Check to see whether the handle has DevicePath Protocol installed
//
gBS->HandleProtocol (
Handles[Index],
&gEfiDevicePathProtocolGuid,
(VOID **) &DevicePath
);
Acpi = NULL;
for (Node = DevicePath; !IsDevicePathEnd (Node); Node = NextDevicePathNode (Node)) {
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
break;
}
//
// Acpi points to the node before Uart node
//
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
}
if ((Acpi != NULL) && IsIsaSerialNode (Acpi)) {
NewMenuEntry = BOpt_CreateMenuEntry (BM_TERMINAL_CONTEXT_SELECT);
if (NewMenuEntry == NULL) {
FreePool (Handles);
return EFI_OUT_OF_RESOURCES;
}
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
CopyMem (&NewMenuEntry->OptionNumber, &Acpi->UID, sizeof (UINT32));
NewTerminalContext->DevicePath = DuplicateDevicePath (DevicePath);
//
// BugBug: I have no choice, calling EfiLibStrFromDatahub will hang the system!
// coz' the misc data for each platform is not correct, actually it's the device path stored in
// datahub which is not completed, so a searching for end of device path will enter a
// dead-loop.
//
NewMenuEntry->DisplayString = EfiLibStrFromDatahub (DevicePath);
if (NULL == NewMenuEntry->DisplayString) {
NewMenuEntry->DisplayString = DevicePathToStr (DevicePath);
}
NewMenuEntry->HelpString = NULL;
gBS->HandleProtocol (
Handles[Index],
&gEfiSerialIoProtocolGuid,
(VOID **) &SerialIo
);
CopyMem (
&NewTerminalContext->BaudRate,
&SerialIo->Mode->BaudRate,
sizeof (UINT64)
);
CopyMem (
&NewTerminalContext->DataBits,
&SerialIo->Mode->DataBits,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->Parity,
&SerialIo->Mode->Parity,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->StopBits,
&SerialIo->Mode->StopBits,
sizeof (UINT8)
);
NewTerminalContext->FlowControl = 0;
SerialIo->GetControl(SerialIo, &FlowControl);
if ((FlowControl & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) != 0) {
NewTerminalContext->FlowControl = UART_FLOW_CONTROL_HARDWARE;
}
InsertTailList (&TerminalMenu.Head, &NewMenuEntry->Link);
TerminalMenu.MenuNumber++;
}
}
if (Handles != NULL) {
FreePool (Handles);
}
//
// Get L"ConOut", L"ConIn" and L"ErrOut" from the Var
//
OutDevicePath = EfiLibGetVariable (L"ConOut", &gEfiGlobalVariableGuid);
InpDevicePath = EfiLibGetVariable (L"ConIn", &gEfiGlobalVariableGuid);
ErrDevicePath = EfiLibGetVariable (L"ErrOut", &gEfiGlobalVariableGuid);
if (OutDevicePath != NULL) {
UpdateComAttributeFromVariable (OutDevicePath);
}
if (InpDevicePath != NULL) {
UpdateComAttributeFromVariable (InpDevicePath);
}
if (ErrDevicePath != NULL) {
UpdateComAttributeFromVariable (ErrDevicePath);
}
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Index);
if (NULL == NewMenuEntry) {
return EFI_NOT_FOUND;
}
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
NewTerminalContext->TerminalType = 0;
NewTerminalContext->IsConIn = FALSE;
NewTerminalContext->IsConOut = FALSE;
NewTerminalContext->IsStdErr = FALSE;
Vendor.Header.Type = MESSAGING_DEVICE_PATH;
Vendor.Header.SubType = MSG_VENDOR_DP;
for (Index2 = 0; Index2 < 4; Index2++) {
CopyMem (&Vendor.Guid, &TerminalTypeGuid[Index2], sizeof (EFI_GUID));
SetDevicePathNodeLength (&Vendor.Header, sizeof (VENDOR_DEVICE_PATH));
NewDevicePath = AppendDevicePathNode (
NewTerminalContext->DevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) &Vendor
);
if (NewMenuEntry->HelpString != NULL) {
FreePool (NewMenuEntry->HelpString);
}
//
// NewMenuEntry->HelpString = DevicePathToStr (NewDevicePath);
// NewMenuEntry->DisplayString = NewMenuEntry->HelpString;
//
NewMenuEntry->HelpString = NULL;
if (BdsLibMatchDevicePaths (OutDevicePath, NewDevicePath)) {
NewTerminalContext->IsConOut = TRUE;
NewTerminalContext->TerminalType = (UINT8) Index2;
}
if (BdsLibMatchDevicePaths (InpDevicePath, NewDevicePath)) {
NewTerminalContext->IsConIn = TRUE;
NewTerminalContext->TerminalType = (UINT8) Index2;
}
if (BdsLibMatchDevicePaths (ErrDevicePath, NewDevicePath)) {
NewTerminalContext->IsStdErr = TRUE;
NewTerminalContext->TerminalType = (UINT8) Index2;
}
}
}
return EFI_SUCCESS;
}
/**
Update Com Ports attributes from DevicePath
@param DevicePath DevicePath that contains Com ports
@retval EFI_SUCCESS The update is successful.
@retval EFI_NOT_FOUND Can not find specific menu entry
**/
EFI_STATUS
UpdateComAttributeFromVariable (
EFI_DEVICE_PATH_PROTOCOL *DevicePath
)
{
EFI_DEVICE_PATH_PROTOCOL *Node;
EFI_DEVICE_PATH_PROTOCOL *SerialNode;
ACPI_HID_DEVICE_PATH *Acpi;
UART_DEVICE_PATH *Uart;
UART_DEVICE_PATH *Uart1;
UINTN TerminalNumber;
BM_MENU_ENTRY *NewMenuEntry;
BM_TERMINAL_CONTEXT *NewTerminalContext;
UINTN Index;
Node = DevicePath;
Node = NextDevicePathNode (Node);
TerminalNumber = 0;
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
while (!IsDevicePathEnd (Node)) {
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
if (IsIsaSerialNode (Acpi)) {
CopyMem (&TerminalNumber, &Acpi->UID, sizeof (UINT32));
}
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
Uart = (UART_DEVICE_PATH *) Node;
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, TerminalNumber);
if (NULL == NewMenuEntry) {
return EFI_NOT_FOUND;
}
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
CopyMem (
&NewTerminalContext->BaudRate,
&Uart->BaudRate,
sizeof (UINT64)
);
CopyMem (
&NewTerminalContext->DataBits,
&Uart->DataBits,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->Parity,
&Uart->Parity,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->StopBits,
&Uart->StopBits,
sizeof (UINT8)
);
SerialNode = NewTerminalContext->DevicePath;
SerialNode = NextDevicePathNode (SerialNode);
while (!IsDevicePathEnd (SerialNode)) {
if ((DevicePathType (SerialNode) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (SerialNode) == MSG_UART_DP)) {
//
// Update following device paths according to
// previous acquired uart attributes
//
Uart1 = (UART_DEVICE_PATH *) SerialNode;
CopyMem (
&Uart1->BaudRate,
&NewTerminalContext->BaudRate,
sizeof (UINT64)
);
CopyMem (
&Uart1->DataBits,
&NewTerminalContext->DataBits,
sizeof (UINT8)
);
CopyMem (
&Uart1->Parity,
&NewTerminalContext->Parity,
sizeof (UINT8)
);
CopyMem (
&Uart1->StopBits,
&NewTerminalContext->StopBits,
sizeof (UINT8)
);
break;
}
SerialNode = NextDevicePathNode (SerialNode);
}
//
// end while
//
}
Node = NextDevicePathNode (Node);
}
//
// end while
//
}
return EFI_SUCCESS;
}
/**
Update the multi-instance device path of Terminal Device based on
the global TerminalMenu. If ChangeTernimal is TRUE, the terminal
device path in the Terminal Device in TerminalMenu is also updated.
@param DevicePath The multi-instance device path.
@param ChangeTerminal TRUE, then device path in the Terminal Device
in TerminalMenu is also updated; FALSE, no update.
@return EFI_SUCCESS The function completes successfully.
**/
EFI_STATUS
ChangeTerminalDevicePath (
IN OUT EFI_DEVICE_PATH_PROTOCOL *DevicePath,
IN BOOLEAN ChangeTerminal
)
{
EFI_DEVICE_PATH_PROTOCOL *Node;
EFI_DEVICE_PATH_PROTOCOL *Node1;
ACPI_HID_DEVICE_PATH *Acpi;
UART_DEVICE_PATH *Uart;
UART_DEVICE_PATH *Uart1;
UINTN Com;
BM_TERMINAL_CONTEXT *NewTerminalContext;
BM_MENU_ENTRY *NewMenuEntry;
Node = DevicePath;
Node = NextDevicePathNode (Node);
Com = 0;
while (!IsDevicePathEnd (Node)) {
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
if (IsIsaSerialNode (Acpi)) {
CopyMem (&Com, &Acpi->UID, sizeof (UINT32));
}
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Com);
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
Uart = (UART_DEVICE_PATH *) Node;
CopyMem (
&Uart->BaudRate,
&NewTerminalContext->BaudRate,
sizeof (UINT64)
);
CopyMem (
&Uart->DataBits,
&NewTerminalContext->DataBits,
sizeof (UINT8)
);
CopyMem (
&Uart->Parity,
&NewTerminalContext->Parity,
sizeof (UINT8)
);
CopyMem (
&Uart->StopBits,
&NewTerminalContext->StopBits,
sizeof (UINT8)
);
//
// Change the device path in the ComPort
//
if (ChangeTerminal) {
Node1 = NewTerminalContext->DevicePath;
Node1 = NextDevicePathNode (Node1);
while (!IsDevicePathEnd (Node1)) {
if ((DevicePathType (Node1) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node1) == MSG_UART_DP)) {
Uart1 = (UART_DEVICE_PATH *) Node1;
CopyMem (
&Uart1->BaudRate,
&NewTerminalContext->BaudRate,
sizeof (UINT64)
);
CopyMem (
&Uart1->DataBits,
&NewTerminalContext->DataBits,
sizeof (UINT8)
);
CopyMem (
&Uart1->Parity,
&NewTerminalContext->Parity,
sizeof (UINT8)
);
CopyMem (
&Uart1->StopBits,
&NewTerminalContext->StopBits,
sizeof (UINT8)
);
break;
}
//
// end if
//
Node1 = NextDevicePathNode (Node1);
}
//
// end while
//
break;
}
}
Node = NextDevicePathNode (Node);
}
return EFI_SUCCESS;
}
