bool MT_FromRemote_VideoSync(void)
{
KillVideo();
memset(VTBuffer[0], 0, CurGame->pitch * 256);
memset(VTBuffer[1], 0, CurGame->pitch * 256);
if(!InitVideo(CurGame))
return(0);
return(1);
}
/**
* Shut down all of the subsystem drivers: video, audio, and joystick.
*/
static void
DriverKill()
{
if (!noconfig)
g_config->save();
if(inited&2)
KillJoysticks();
if(inited&4)
KillVideo();
if(inited&1)
KillSound();
inited=0;
}
static void DoCheatSeq(void)
{
#if defined(DOS) || defined(SDL) || defined(FLASH)
SilenceSound(1);
#endif
KillKeyboard();
KillVideo();
DoConsoleCheatConfig();
InitVideo(CurGame);
InitKeyboard();
#if defined(DOS) || defined(SDL) || defined(FLASH)
SilenceSound(0);
#endif
}
int ButtonConfigBegin(void)
{
SDL_Surface *screen;
SDL_QuitSubSystem(SDL_INIT_VIDEO);
bcpv=KillVideo();
bcpj=KillJoysticks();
if(!(SDL_WasInit(SDL_INIT_VIDEO)&SDL_INIT_VIDEO))
if(SDL_InitSubSystem(SDL_INIT_VIDEO)==-1)
{
FCEUD_Message(SDL_GetError());
return(0);
}
screen = SDL_SetVideoMode(300, 1, 8, 0);
SDL_WM_SetCaption("Button Config",0);
InitJoysticks();
return(1);
}
/**
* Attempts to initialize the graphical video display. Returns 0 on
* success, -1 on failure.
*/
int
InitVideo(FCEUGI *gi)
{
// XXX soules - const? is this necessary?
const SDL_VideoInfo *vinf;
int error, flags = 0;
int doublebuf, xstretch, ystretch, xres, yres, show_fps;
FCEUI_printf("Initializing video...");
// load the relevant configuration variables
g_config->getOption("SDL.Fullscreen", &s_fullscreen);
g_config->getOption("SDL.DoubleBuffering", &doublebuf);
#ifdef OPENGL
g_config->getOption("SDL.OpenGL", &s_useOpenGL);
#endif
g_config->getOption("SDL.SpecialFilter", &s_sponge);
g_config->getOption("SDL.XStretch", &xstretch);
g_config->getOption("SDL.YStretch", &ystretch);
g_config->getOption("SDL.LastXRes", &xres);
g_config->getOption("SDL.LastYRes", &yres);
g_config->getOption("SDL.ClipSides", &s_clipSides);
g_config->getOption("SDL.NoFrame", &noframe);
g_config->getOption("SDL.ShowFPS", &show_fps);
// check the starting, ending, and total scan lines
FCEUI_GetCurrentVidSystem(&s_srendline, &s_erendline);
s_tlines = s_erendline - s_srendline + 1;
// check if we should auto-set x/y resolution
// check for OpenGL and set the global flags
#if OPENGL
if(s_useOpenGL && !s_sponge) {
flags = SDL_OPENGL;
}
#endif
// initialize the SDL video subsystem if it is not already active
if(!SDL_WasInit(SDL_INIT_VIDEO)) {
error = SDL_InitSubSystem(SDL_INIT_VIDEO);
if(error) {
FCEUD_PrintError(SDL_GetError());
return -1;
}
}
s_inited = 1;
// shows the cursor within the display window
SDL_ShowCursor(1);
// determine if we can allocate the display on the video card
vinf = SDL_GetVideoInfo();
if(vinf->hw_available) {
flags |= SDL_HWSURFACE;
}
// get the monitor's current resolution if we do not already have it
if(s_nativeWidth < 0) {
s_nativeWidth = vinf->current_w;
}
if(s_nativeHeight < 0) {
s_nativeHeight = vinf->current_h;
}
// check to see if we are showing FPS
FCEUI_SetShowFPS(show_fps);
// check if we are rendering fullscreen
if(s_fullscreen) {
int no_cursor;
g_config->getOption("SDL.NoFullscreenCursor", &no_cursor);
flags |= SDL_FULLSCREEN;
SDL_ShowCursor(!no_cursor);
}
else {
SDL_ShowCursor(1);
}
if(noframe) {
flags |= SDL_NOFRAME;
}
// gives the SDL exclusive palette control... ensures the requested colors
// flags |= SDL_HWPALETTE;
// enable double buffering if requested and we have hardware support
#ifdef OPENGL
if(s_useOpenGL) {
FCEU_printf("Initializing with OpenGL (Disable with '--opengl 0').\n");
if(doublebuf) {
SDL_GL_SetAttribute(SDL_GL_DOUBLEBUFFER, 1);
}
} else
#endif
if(doublebuf && (flags & SDL_HWSURFACE)) {
flags |= SDL_DOUBLEBUF;
}
if(s_fullscreen) {
int desbpp, autoscale;
g_config->getOption("SDL.BitsPerPixel", &desbpp);
g_config->getOption("SDL.AutoScale", &autoscale);
if (autoscale)
{
double auto_xscale = GetXScale(xres);
double auto_yscale = GetYScale(yres);
double native_ratio = ((double)NWIDTH) / s_tlines;
double screen_ratio = ((double)xres) / yres;
int keep_ratio;
g_config->getOption("SDL.KeepRatio", &keep_ratio);
// Try to choose resolution
if (screen_ratio < native_ratio)
{
// The screen is narrower than the original. Maximizing width will not clip
auto_xscale = auto_yscale = GetXScale(xres);
if (keep_ratio)
auto_yscale = GetYScale(yres);
}
else
{
auto_yscale = auto_xscale = GetYScale(yres);
if (keep_ratio)
auto_xscale = GetXScale(xres);
}
s_exs = auto_xscale;
s_eys = auto_yscale;
}
else
{
g_config->getOption("SDL.XScale", &s_exs);
g_config->getOption("SDL.YScale", &s_eys);
}
g_config->getOption("SDL.SpecialFX", &s_eefx);
#ifdef OPENGL
if(!s_useOpenGL) {
s_exs = (int)s_exs;
s_eys = (int)s_eys;
} else {
desbpp = 0;
}
// -Video Modes Tag-
if(s_sponge) {
if(s_sponge == 4 || s_sponge == 5) {
s_exs = s_eys = 3;
} else {
s_exs = s_eys = 2;
}
s_eefx = 0;
if(s_sponge == 1 || s_sponge == 4) {
desbpp = 32;
}
}
if((s_useOpenGL && !xstretch) || !s_useOpenGL)
#endif
if(xres < (NWIDTH * s_exs) || s_exs <= 0.01) {
FCEUD_PrintError("xscale out of bounds.");
KillVideo();
return -1;
}
#ifdef OPENGL
if((s_useOpenGL && !ystretch) || !s_useOpenGL)
#endif
if(yres < s_tlines * s_eys || s_eys <= 0.01) {
FCEUD_PrintError("yscale out of bounds.");
KillVideo();
return -1;
}
#ifdef OPENGL
s_screen = SDL_SetVideoMode(s_useOpenGL ? s_nativeWidth : xres,
s_useOpenGL ? s_nativeHeight : yres,
desbpp, flags);
#else
s_screen = SDL_SetVideoMode(xres, yres, desbpp, flags);
#endif
if(!s_screen) {
FCEUD_PrintError(SDL_GetError());
return -1;
}
} else {
int desbpp;
g_config->getOption("SDL.BitsPerPixel", &desbpp);
g_config->getOption("SDL.XScale", &s_exs);
g_config->getOption("SDL.YScale", &s_eys);
g_config->getOption("SDL.SpecialFX", &s_eefx);
// -Video Modes Tag-
if(s_sponge) {
if(s_sponge >= 4) {
s_exs = s_eys = 3;
} else {
s_exs = s_eys = 2;
}
s_eefx = 0;
}
#ifdef OPENGL
if(!s_useOpenGL) {
s_exs = (int)s_exs;
s_eys = (int)s_eys;
}
if(s_exs <= 0.01) {
FCEUD_PrintError("xscale out of bounds.");
KillVideo();
return -1;
}
if(s_eys <= 0.01) {
FCEUD_PrintError("yscale out of bounds.");
KillVideo();
return -1;
}
if(s_sponge && s_useOpenGL) {
FCEUD_PrintError("scalers not compatible with openGL mode.");
KillVideo();
return -1;
}
#endif
#if defined(_GTK) && defined(SDL_VIDEO_DRIVER_X11)
if(noGui == 0)
{
while (gtk_events_pending())
gtk_main_iteration_do(FALSE);
char SDL_windowhack[128];
sprintf(SDL_windowhack, "SDL_WINDOWID=%u", (unsigned int)GDK_WINDOW_XID(gtk_widget_get_window(evbox)));
SDL_putenv(SDL_windowhack);
// init SDL video
if (SDL_WasInit(SDL_INIT_VIDEO))
SDL_QuitSubSystem(SDL_INIT_VIDEO);
if ( SDL_InitSubSystem(SDL_INIT_VIDEO) < 0 )
{
fprintf(stderr, "Couldn't init SDL video: %s\n", SDL_GetError());
gtk_main_quit();
}
}
#endif
s_screen = SDL_SetVideoMode((int)(NWIDTH * s_exs),
(int)(s_tlines * s_eys),
desbpp, flags);
if(!s_screen) {
FCEUD_PrintError(SDL_GetError());
return -1;
}
#ifdef _GTK
if(noGui == 0)
{
GtkRequisition req;
gtk_widget_size_request(GTK_WIDGET(MainWindow), &req);
gtk_window_resize(GTK_WINDOW(MainWindow), req.width, req.height);
}
#endif
}
s_curbpp = s_screen->format->BitsPerPixel;
if(!s_screen) {
FCEUD_PrintError(SDL_GetError());
KillVideo();
return -1;
}
#if 0
// XXX soules - this would be creating a surface on the video
// card, but was commented out for some reason...
s_BlitBuf = SDL_CreateRGBSurface(SDL_HWSURFACE, 256, 240,
s_screen->format->BitsPerPixel,
s_screen->format->Rmask,
s_screen->format->Gmask,
s_screen->format->Bmask, 0);
#endif
FCEU_printf(" Video Mode: %d x %d x %d bpp %s\n",
s_screen->w, s_screen->h, s_screen->format->BitsPerPixel,
s_fullscreen ? "full screen" : "");
if(s_curbpp != 8 && s_curbpp != 16 && s_curbpp != 24 && s_curbpp != 32) {
FCEU_printf(" Sorry, %dbpp modes are not supported by FCE Ultra. Supported bit depths are 8bpp, 16bpp, and 32bpp.\n", s_curbpp);
KillVideo();
return -1;
}
// if the game being run has a name, set it as the window name
if(gi)
{
if(gi->name) {
SDL_WM_SetCaption((const char *)gi->name, (const char *)gi->name);
} else {
SDL_WM_SetCaption(FCEU_NAME_AND_VERSION,"FCE Ultra");
}
}
// create the surface for displaying graphical messages
#ifdef LSB_FIRST
s_IconSurface = SDL_CreateRGBSurfaceFrom((void *)fceu_playicon.pixel_data,
32, 32, 24, 32 * 3,
0xFF, 0xFF00, 0xFF0000, 0x00);
#else
s_IconSurface = SDL_CreateRGBSurfaceFrom((void *)fceu_playicon.pixel_data,
32, 32, 24, 32 * 3,
0xFF0000, 0xFF00, 0xFF, 0x00);
#endif
SDL_WM_SetIcon(s_IconSurface,0);
s_paletterefresh = 1;
// XXX soules - can't SDL do this for us?
// if using more than 8bpp, initialize the conversion routines
if(s_curbpp > 8) {
InitBlitToHigh(s_curbpp >> 3,
s_screen->format->Rmask,
s_screen->format->Gmask,
s_screen->format->Bmask,
s_eefx, s_sponge, 0);
#ifdef OPENGL
if(s_useOpenGL)
{
int openGLip;
g_config->getOption("SDL.OpenGLip", &openGLip);
if(!InitOpenGL(NOFFSET, 256 - (s_clipSides ? 8 : 0),
s_srendline, s_erendline + 1,
s_exs, s_eys, s_eefx,
openGLip, xstretch, ystretch, s_screen))
{
FCEUD_PrintError("Error initializing OpenGL.");
KillVideo();
return -1;
}
}
#endif
}
int InitVideo(FCEUGI *gi)
{
// This is a big TODO. Stubbing this off into its own function,
// as the SDL surface routines have changed drastically in SDL2
// TODO - SDL2
const char * window_name;
int error, flags = 0;
int doublebuf, xstretch, ystretch, xres, yres, show_fps;
uint32_t Amask, Rmask, Gmask, Bmask;
int bpp;
FCEUI_printf("Initializing video (SDL2.x) ...");
// load the relevant configuration variables
g_config->getOption("SDL.Fullscreen", &s_fullscreen);
g_config->getOption("SDL.DoubleBuffering", &doublebuf);
#ifdef OPENGL
g_config->getOption("SDL.OpenGL", &s_useOpenGL);
#endif
g_config->getOption("SDL.SpecialFilter", &s_sponge);
g_config->getOption("SDL.XStretch", &xstretch);
g_config->getOption("SDL.YStretch", &ystretch);
g_config->getOption("SDL.LastXRes", &xres);
g_config->getOption("SDL.LastYRes", &yres);
g_config->getOption("SDL.ClipSides", &s_clipSides);
g_config->getOption("SDL.NoFrame", &noframe);
g_config->getOption("SDL.ShowFPS", &show_fps);
// check the starting, ending, and total scan lines
FCEUI_GetCurrentVidSystem(&s_srendline, &s_erendline);
s_tlines = s_erendline - s_srendline + 1;
#if OPENGL
if( !s_useOpenGL || s_sponge )
{
FCEUD_PrintError("SDL2 Does not support non-OpenGL rendering or special filters\n");
KillVideo();
return -1;
}
#endif
// initialize the SDL video subsystem if it is not already active
if(!SDL_WasInit(SDL_INIT_VIDEO)) {
error = SDL_InitSubSystem(SDL_INIT_VIDEO);
if(error) {
FCEUD_PrintError(SDL_GetError());
return -1;
}
}
s_inited = 1;
// For simplicity, hard-code this to 32bpp for now...
s_curbpp = 32;
// If game is running, set window name accordingly
if( gi )
{
window_name = (const char *) gi->name;
}
else
{
window_name = "FCE Ultra";
}
s_exs = 1.0;
s_eys = 1.0;
if(s_fullscreen) {
s_window = SDL_CreateWindow( window_name,
SDL_WINDOWPOS_UNDEFINED,
SDL_WINDOWPOS_UNDEFINED,
0, 0, // Res not specified in full-screen mode
SDL_WINDOW_FULLSCREEN_DESKTOP);
} else {
#if defined(_GTK) && defined(SDL_VIDEO_DRIVER_X11)
if(noGui == 0 && strcmp(SDL_GetCurrentVideoDriver(), "x11") == 0) {
s_window = SDL_CreateWindowFrom((void*)GDK_WINDOW_XID (gtk_widget_get_window(evbox)));
}
else
#endif
s_window = SDL_CreateWindow( window_name,
SDL_WINDOWPOS_UNDEFINED,
SDL_WINDOWPOS_UNDEFINED,
xres, yres,
0);
}
// This stuff all applies regardless of full-screen vs windowed mode.
s_renderer = SDL_CreateRenderer(s_window, -1, 0);
// Set logical rendering size & specify scaling mode. All rendering is
// now done to the renderer rather than directly to the screen surface.
// The renderer takes care of any scaling necessary.
//
// NOTE: setting scale quality to "nearest" will result in a blown-up but
// pixelated while "linear" will tend to blur everything.
SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest");
SDL_RenderSetLogicalSize(s_renderer, xres, yres);
//
// Create the texture that will ultimately be rendered.
// s_screen is used to build up an image, then the texture will be updated
// all at once when it's ready
s_texture = SDL_CreateTexture(s_renderer,
SDL_PIXELFORMAT_ARGB8888,
SDL_TEXTUREACCESS_STREAMING,
xres, yres);
//
// Create a surface to draw pixels onto
//
SDL_PixelFormatEnumToMasks(SDL_PIXELFORMAT_ARGB8888, &bpp, &Rmask, &Gmask, &Bmask, &Amask);
s_screen = SDL_CreateRGBSurface(0, xres, yres, bpp,
Rmask, Gmask, Bmask, Amask);
if( !s_screen )
{
FCEUD_PrintError(SDL_GetError());
return -1;
}
//
// Setup Icon surface
//
#ifdef LSB_FIRST
s_IconSurface = SDL_CreateRGBSurfaceFrom((void *)fceu_playicon.pixel_data,
32, 32, 24, 32 * 3,
0xFF, 0xFF00, 0xFF0000, 0x00);
#else
s_IconSurface = SDL_CreateRGBSurfaceFrom((void *)fceu_playicon.pixel_data,
32, 32, 24, 32 * 3,
0xFF0000, 0xFF00, 0xFF, 0x00);
#endif
SDL_SetWindowIcon(s_window, s_IconSurface);
s_paletterefresh = 1; // Force palette refresh
// always init blit to high since bpp forced to 32 for now.
InitBlitToHigh(s_curbpp >> 3,
s_screen->format->Rmask,
s_screen->format->Gmask,
s_screen->format->Bmask,
0, //s_eefx, Hard-code SFX off
0, //s_sponge, Hard-code special filters off.
0);
return 0;
}
