示例#1
0
void RealView_framebuffer_init(void)
{
    gRealviewPl111Base = ml_io_map(REALVIEW_PL111_BASE, PAGE_SIZE);
    
    /*
     * The hardware demands a framebuffer, but the framebuffer has to be given
     * in a hardware address.
     */
    void* framebuffer = pmap_steal_memory(1024 * 768 * 4);
    void* framebuffer_phys = pmap_get_phys(kernel_pmap, framebuffer);

    uint32_t depth = 2;
    uint32_t width = 1024;
    uint32_t height = 768;
    
    uint32_t pitch = (width * depth);
    uint32_t fb_length = (pitch * width);
    
    uint32_t timingRegister, controlRegister;
    
    /* Set framebuffer address */
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_UPPER_FB) = framebuffer_phys;
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_LOWER_FB) = framebuffer_phys;
    
    /* Initialize timings to 1024x768x16 */
	HARDWARE_REGISTER(gRealviewPl111Base + PL111_TIMINGS_0) = LCDTIMING0_PPL(width);
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_TIMINGS_1) = LCDTIMING1_LPP(height);
    
    /* Enable the TFT/LCD Display */
	HARDWARE_REGISTER(gRealviewPl111Base + PL111_CONTROL) =
                         LCDCONTROL_LCDEN |
                         LCDCONTROL_LCDTFT |
                         LCDCONTROL_LCDPWR |
                         LCDCONTROL_LCDBPP(4);
    
    PE_state.video.v_baseAddr = (unsigned long)framebuffer_phys;
    PE_state.video.v_rowBytes = width * 2;
    PE_state.video.v_width = width;
    PE_state.video.v_height = height;
    PE_state.video.v_depth = 2 * (8);   // 16bpp
    
    kprintf(KPRINTF_PREFIX "framebuffer initialized\n");
    bzero(framebuffer, (pitch * height));
    
    initialize_screen((void*)&PE_state.video, kPEAcquireScreen);
    initialize_screen((void*)&PE_state.video, kPEEnableScreen);
}
示例#2
0
文件: pe_realview.c 项目: armv8/xnu
void RealView_framebuffer_init(void)
{
    gRealviewPl111Base = ml_io_map(REALVIEW_PL111_BASE, PAGE_SIZE);

    /*
     * The hardware demands a framebuffer, but the framebuffer has to be given
     * in a hardware address.
     */
    void *framebuffer = pmap_steal_memory(1024 * 768 * 4);
    void *framebuffer_phys = pmap_extract(kernel_pmap, framebuffer);

    uint32_t depth = 2;
    uint32_t width = 1024;
    uint32_t height = 768;

    uint32_t pitch = (width * depth);
    uint32_t fb_length = (pitch * width);

    uint32_t timingRegister, controlRegister;

    /*
     * Set framebuffer address 
     */
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_UPPER_FB) = framebuffer_phys;
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_LOWER_FB) = framebuffer_phys;

    /*
     * Initialize timings to 1024x768x16 
     */
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_TIMINGS_0) = LCDTIMING0_PPL(width);
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_TIMINGS_1) = LCDTIMING1_LPP(height);

    /*
     * Enable the TFT/LCD Display 
     */
    HARDWARE_REGISTER(gRealviewPl111Base + PL111_CONTROL) = LCDCONTROL_LCDEN | LCDCONTROL_LCDTFT | LCDCONTROL_LCDPWR | LCDCONTROL_LCDBPP(5);

    PE_state.video.v_baseAddr = (unsigned long) framebuffer_phys;
    PE_state.video.v_rowBytes = width * 4;
    PE_state.video.v_width = width;
    PE_state.video.v_height = height;
    PE_state.video.v_depth = 4 * (8);   // 16bpp

    kprintf(KPRINTF_PREFIX "framebuffer initialized\n");
    bzero(framebuffer, (pitch * height));

    char tempbuf[16];
    
	if (PE_parse_boot_argn("-graphics-mode", tempbuf, sizeof(tempbuf))) {
        /*
         * BootX like framebuffer. 
         */
        memset(framebuffer, 0xb9, PE_state.video.v_rowBytes * PE_state.video.v_height);
        initialize_screen((void *) &PE_state.video, kPEGraphicsMode);
    } else {
		initialize_screen((void *) &PE_state.video, kPETextMode);
	}
}