double seFunc( Lgm_Vector *P, double TargetHeight, Lgm_MagModelInfo *Info ) {
Lgm_Vector w;
double Height, F;
Height = WGS84_A*(Lgm_Magnitude( P )-1.0);
F = Height - TargetHeight;
return( F );
}
void Lgm_B_Cross_GradB_Over_B( Lgm_Vector *u0, Lgm_Vector *A, int DerivScheme, double h, Lgm_MagModelInfo *m ) {
double B;
Lgm_Vector GradB, Bvec;
m->Bfield( u0, &Bvec, m );
B = Lgm_Magnitude( &Bvec );
Lgm_GradB( u0, &GradB, DerivScheme, h, m );
Lgm_CrossProduct( &Bvec, &GradB, A );
Lgm_ScaleVector( A, 1.0/B );
}
/**
* \brief
* Initialize a Lgm_SlerpInfo structure.
* \details
* This routine computes \f$\sin(\phi)\f$, \f$\cos(\phi)\f$, and
* \f$\phi\f$. Where \f$\phi\f$ is the angle between the initial and final
* unit vectors. This is done outside the main slerp routine because you
* may want to perform many interps with the same endpoint vectors.
*
* \param[in] a: initial unit vector.
* \param[in] b: final unit vector.
*
* \param[in,out] si: Lgm_SlerpInfo structure.
*
*/
void Lgm_InitSlerp( Lgm_Vector *a, Lgm_Vector *b, Lgm_SlerpInfo *si ) {
Lgm_Vector v, w;
si->CosPhi = Lgm_DotProduct( a, b );
w = *a; Lgm_ScaleVector( &w, si->CosPhi ); // w = cos(phi)*a-hat
Lgm_VecSub( &v, b, &w ); // v = b-hat - cos(phi)*a-hat
si->SinPhi = Lgm_Magnitude( &v ); // sin(phi)
si->Phi = atan2( si->SinPhi, si->CosPhi ); // Phi
}
/*
* Normalize the given vector. I.e. make it into a unit vector.
* plus return magnitude since you already have it!
*/
double Lgm_NormalizeVector(Lgm_Vector *a) {
double magnitude, inv;
magnitude = Lgm_Magnitude(a);
if (magnitude > 0.0) {
inv = 1.0/magnitude;
a->x *= inv;
a->y *= inv;
a->z *= inv;
return(magnitude);
} else {
return(-1.0);
}
}
int main( ) {
Lgm_ElapsedTimeInfo t;
Lgm_CTrans *c = Lgm_init_ctrans( 1 ); // more compact declaration
Lgm_QinDentonOne p;
Lgm_MagModelInfo *mInfo;
Lgm_Vector *u, *B, q, v;
double Time, JD, x, y, z, r, d, dist;
long int Date, n;
Lgm_Octree *Octree;
Lgm_OctreeData *kNN;
int K, Kgot, i, j;
t.ColorizeText = TRUE;
Lgm_ElapsedTimeInit( &t, 255, 150, 0 );
LGM_ARRAY_1D( u, 5000000, Lgm_Vector );
LGM_ARRAY_1D( B, 5000000, Lgm_Vector );
mInfo = Lgm_InitMagInfo( );
Date = 20020713; // August 12, 2004
Time = 18.0 + 0.0/60.0 + 30.0/3600.0; // Universal Time Coordinated (in decimal hours)
JD = Lgm_Date_to_JD( Date, Time, c ); // Compute JD
// Get (interpolate) the QinDenton vals from the values in the file at the given Julian Date
Lgm_get_QinDenton_at_JD( JD, &p, 0 );
Lgm_Set_Coord_Transforms( Date, Time, mInfo->c );
Lgm_set_QinDenton( &p, mInfo );
mInfo->Bfield = Lgm_B_T89;
d = 0.3;
n = 0;
Lgm_PrintCurrentTime( &t );
for ( x = -15.0; x <= 15.0; x += d ){
for ( y = -15.0; y <= 15.0; y += d ){
for ( z = -15.0; z <= 15.0; z += d ){
u[n].x = x; u[n].y = y; u[n].z = z;
r = Lgm_Magnitude( &u[n] );
//if (r > 1.1){
// mInfo->Bfield( &u[n], &B[n], mInfo );
++n;
//}
}
}
}
Lgm_PrintElapsedTime( &t );
printf("n = %ld\n", n);
/*
* Test kNN algorithm.
*/
printf("Creating Octree\n");
Lgm_ElapsedTimeInit( &t, 255, 150, 0 );
Octree = Lgm_InitOctree( u, B, n );
printf("Min, Max, Diff = %g %g %g\n", Octree->Min, Octree->Max, Octree->Diff);
Lgm_PrintElapsedTime( &t );
q.x = 3.2233;
q.y = 2.4698;
q.z = 1.35193;
K = 4;
LGM_ARRAY_1D( kNN, K, Lgm_OctreeData );
printf("\n\nTesting kNN (1000000 times)\n");
Lgm_ElapsedTimeInit( &t, 255, 150, 0 );
for (j=0; j<=1000000; j++){
q.x = 30.0*rand()/(double)RAND_MAX - 15.0;
q.y = 30.0*rand()/(double)RAND_MAX - 15.0;
q.z = 30.0*rand()/(double)RAND_MAX - 15.0;
Lgm_Octree_kNN( &q, Octree, K, &Kgot, 1.0*1.0, kNN );
}
Lgm_PrintElapsedTime( &t );
printf("\n\nKgot = %d q = %g %g %g\n", Kgot, q.x, q.y, q.z);
for (i=0; i<Kgot; i++){
Lgm_OctreeUnScalePosition( &(kNN[i].Position), &v, Octree );
Lgm_OctreeUnScaleDistance( sqrt(kNN[i].Dist2), &dist, Octree );
printf("%02d: dist = %g v = %g %g %g\n", i, dist, v.x, v.y, v.z );
}
LGM_ARRAY_1D_FREE( kNN );
printf("Freeing Octree\n");
Lgm_ElapsedTimeInit( &t, 255, 150, 0 );
Lgm_FreeOctree( Octree );
printf("Octree Freed\n");
Lgm_PrintElapsedTime( &t );
Lgm_free_ctrans( c );
Lgm_FreeMagInfo( mInfo );
LGM_ARRAY_1D_FREE( u );
LGM_ARRAY_1D_FREE( B );
return(0);
}
/*
* Print an Lgm_Vector
*/
void Lgm_PrintVector(Lgm_Vector *v) {
printf("x:%lf y:%lf z:%lf mag:%lf\n", v->x, v->y, v->z, Lgm_Magnitude(v));
return;
}
/*
* Find Magnitude of difference between to vectors
*/
double Lgm_VecDiffMag(Lgm_Vector *a, Lgm_Vector *b ) {
Lgm_Vector c;
Lgm_VecSub( &c, a, b ); // c = a-b
return( Lgm_Magnitude( &c ) );
}
/**
* \brief
* Compute the instantaneous gradient and curvature drift velocity of the guiding center.
*
*
*
* \details
* The gradient and curvature drift velocity of the guiding center is given by;
* \f[
* V_s = {mv^2\over qB^2}\left(\left(1-{B\over
* 2B_m}\right){\vec{B}\times\nabla B\over B} + \left(1-{B\over
* B_m}\right){(\nabla\times \vec{B})_perp} \right)
* \f]
* (e.g. see Sukhtina, M.A., "One the calculation of the magnetic srift
* velocity of particles with arbitrary pitch angles, Planet Space Sci.
* 41, 327--331, 1993.) With \f$\eta = T/E_0\f$, where \f$T\f$ is the
* particle's kinetic energy, and \f$E_0\f$ its rest energy, this can be
* rewritten as,
* \f[
* V_s = {\eta (2+\eta)\over (1+\eta)}{E_0\over qB^2}\left(\left(1-{B\over
* 2B_m}\right){\vec{B}\times\nabla B\over B} + \left(1-{B\over
* B_m}\right){(\nabla\times \vec{B})_perp} \right)
* \f]
*
*
* \param[in] u0 Position (in GSM) to use. [Re]
* \param[out] Vel The computed drift velocity in GSM coords. [km/s]
* \param[in] q Charge of the particle. [C]
* \param[in] T Kinetic energy of the particle. [MeV]
* \param[in] E0 Rest energy of the particle. [MeV]
* \param[in] Bm Magnitude of B-field at mirror point for particle. [nT]
* \param[in] DerivScheme Derivative scheme to use (can be one of LGM_DERIV_SIX_POINT, LGM_DERIV_FOUR_POINT, or LGM_DERIV_TWO_POINT).
* \param[in] h The delta (in Re) to use for grid spacing in the derivative scheme.
* \param[in,out] m A properly initialized and configured Lgm_MagModelInfo structure.
*
*
* \author Mike Henderson
* \date 2011
*
*/
int Lgm_GradAndCurvDriftVel( Lgm_Vector *u0, Lgm_Vector *Vel, Lgm_MagModelInfo *m ) {
double B, BoverBm, g, eta, h, Beta, Beta2, Gamma;
double q, T, E0, Bm;
int DerivScheme;
Lgm_Vector CurlB, CurlB_para, CurlB_perp, GradB, Bvec, Q, R, S, W, Z;
Lgm_Vector B_Cross_GradB;
q = m->Lgm_VelStep_q;
T = m->Lgm_VelStep_T;
E0 = m->Lgm_VelStep_E0;
Bm = m->Lgm_VelStep_Bm;
h = m->Lgm_VelStep_h;
DerivScheme = m->Lgm_VelStep_DerivScheme;
//printf("Lgm_GradAndCurvDriftVel: u0 = %g %g %g\n", u0->x, u0->y, u0->z);
m->Bfield( u0, &Bvec, m );
B = Lgm_Magnitude( &Bvec );
BoverBm = B/Bm;
//printf("BoverBm = %g\n", BoverBm);
/*
* Compute B cross GradB [nT/Re]
*/
Lgm_GradB( u0, &GradB, DerivScheme, h, m );
Lgm_CrossProduct( &Bvec, &GradB, &B_Cross_GradB );
/*
* Compute (curl B)_perp [nT/Re]
*/
Lgm_CurlB2( u0, &CurlB, &CurlB_para, &CurlB_perp, DerivScheme, h, m );
/*
* Compute instantaneous gradient/curv drift Velocity.
*/
Q = B_Cross_GradB;
g = (1.0-0.5*BoverBm)/B;
//printf("g1 = %g\n", g);
Lgm_ScaleVector( &Q, g ); // [nT/Re]
R = CurlB_perp;
g = 1.0-BoverBm;
//printf("g2 = %g\n", g);
Lgm_ScaleVector( &R, g ); // [nT/Re]
Lgm_VecAdd( &S, &Q, &R ); // [nT/Re]
eta = T/E0; // kinetic energy over rest energy
Gamma = eta + 1.0;
Beta2 = 1.0 - 1.0/(Gamma*Gamma);
Beta = sqrt( Beta2 );
g = Gamma*Beta2*E0*1e6*Joules_Per_eV/(q*B*B); // [ N m / (A s nT^2) ]
// gS would have units of [ N m / (A s nT Re) ], so convert nT and Re to SI
// to get a final answer in m/s. Then convert to km/s.
g *= 1e9/(Re*1e6);
g /= Re;
//Re/s
//printf("g3 = %g\n", g);
Lgm_ScaleVector( &S, g ); // [ N m / (A s T m) ] = [ N m / (A s (N/(A m) m) ] = [ m/s ]
// now its Re/s
// Add in parallel velocity (Note that v = c*Beta)
if (BoverBm >= 1.0) {
g = 0.0;
} else {
g = -LGM_c/(1000.0*Re)*Beta*sqrt(1.0-BoverBm)/B;
}
//printf("T = %g, Beta = %g g = %g\n", T, Beta, g);
W = Bvec;
Lgm_ScaleVector( &W, g );
//printf("W = %g %g %g\n", W.x, W.y, W.z);
Lgm_VecAdd( &Z, &S, &W );
*Vel = Z;
return(1);
}
/**
* Input Variables:
*
* Date:
* UTC:
* u: Input position vector in GSM
* nAlpha: Number of Pitch Angles to compute
* Alpha: Pitch Angles to compute
*
* Input/OutPut Variables:
*
* MagEphemInfo: Structure used to input and output parameters/settings/results to/from routine.
*
*/
void Lgm_ComputeLstarVersusPA( long int Date, double UTC, Lgm_Vector *u, int nAlpha, double *Alpha, int Colorize, Lgm_MagEphemInfo *MagEphemInfo ) {
Lgm_LstarInfo *LstarInfo, *LstarInfo2, *LstarInfo3;
Lgm_Vector v1, v2, v3, vv1, Bvec;
double sa, sa2, Blocal;
double Lam, CosLam, LSimple;
int i, k, LS_Flag, nn, tk, TraceFlag;
char *PreStr, *PostStr;
/* These should be set by the user in the setup up MagEphemInfo no in here */
//MagEphemInfo->LstarInfo->SaveShellLines = FALSE;
//MagEphemInfo->LstarInfo->FindShellPmin = FALSE;
//MagEphemInfo->LstarInfo->ComputeVgc = FALSE;
//MagEphemInfo->LstarInfo->ComputeVgc = FALSE;
LstarInfo = MagEphemInfo->LstarInfo;
// Save Date, UTC to MagEphemInfo structure
MagEphemInfo->Date = Date;
MagEphemInfo->UTC = UTC;
// Save nAlpha, and Alpha array to MagEphemInfo structure
MagEphemInfo->nAlpha = nAlpha;
for (i=0; i<MagEphemInfo->nAlpha; i++) MagEphemInfo->Alpha[i] = Alpha[i];
// Set Tolerances
Lgm_SetLstarTolerances( MagEphemInfo->LstarQuality, MagEphemInfo->nFLsInDriftShell, LstarInfo );
// set coord transformation
Lgm_Set_Coord_Transforms( Date, UTC, LstarInfo->mInfo->c );
/*
* Blocal at sat location.
*/
MagEphemInfo->P = *u;
LstarInfo->mInfo->Bfield( u, &Bvec, LstarInfo->mInfo );
Blocal = Lgm_Magnitude( &Bvec );
MagEphemInfo->B = Blocal;
//printf("Blocal = %g\n", Blocal);
for ( i=0; i<MagEphemInfo->nAlpha; i++ ){
sa = sin( MagEphemInfo->Alpha[i]*RadPerDeg ); sa2 = sa*sa;
MagEphemInfo->Bm[i] = Blocal/sa2;
//printf("Bm[%d] = %g\n", i, MagEphemInfo->Bm[i] );
}
/*
* Compute Field-related quantities for each Pitch Angle.
*
*
* First do a trace to identify the FL type and some of its critical points.
*
*/
TraceFlag = Lgm_Trace( u, &v1, &v2, &v3, LstarInfo->mInfo->Lgm_LossConeHeight, TRACE_TOL, TRACE_TOL2, LstarInfo->mInfo );
MagEphemInfo->FieldLineType = TraceFlag;
//printf("P = %g %g %g Blocal = %lf Bmin = %lf \n", u->x, u->y, u->z, Blocal, MagEphemInfo->Bmin );
if ( TraceFlag > 0 ) {
MagEphemInfo->Ellipsoid_Footprint_Ps = v1;
MagEphemInfo->Ellipsoid_Footprint_Pn = v2;
MagEphemInfo->Pmin = v3;
MagEphemInfo->Snorth = LstarInfo->mInfo->Snorth;
MagEphemInfo->Ssouth = LstarInfo->mInfo->Ssouth;
MagEphemInfo->Smin = LstarInfo->mInfo->Smin;
MagEphemInfo->Bmin = LstarInfo->mInfo->Bmin;
//printf("P = %g %g %g Blocal = %lf Bmin = %lf \n", u->x, u->y, u->z, Blocal, MagEphemInfo->Bmin );
//MagEphemInfo->Mref = LstarInfo->mInfo->c->M_cd_McIllwain;
MagEphemInfo->Mref = LstarInfo->mInfo->c->M_cd_2010;
MagEphemInfo->Mcurr = LstarInfo->mInfo->c->M_cd;
MagEphemInfo->Mused = MagEphemInfo->Mref;
}
if ( TraceFlag != 1 ) {
/*
* FL not closed.
*/
for ( i=0; i<MagEphemInfo->nAlpha; i++ ){
MagEphemInfo->Lstar[i] = LGM_FILL_VALUE;
MagEphemInfo->I[i] = LGM_FILL_VALUE;
MagEphemInfo->K[i] = LGM_FILL_VALUE;
MagEphemInfo->Sb[i] = LGM_FILL_VALUE;
}
MagEphemInfo->Sb0 = LGM_FILL_VALUE;
MagEphemInfo->d2B_ds2 = LGM_FILL_VALUE;
MagEphemInfo->RofC = LGM_FILL_VALUE;
}
if ( TraceFlag == 1 ) {
MagEphemInfo->Sb0 = LstarInfo->mInfo->Sb0; // Sb Integral for equatorially mirroring particles.
MagEphemInfo->d2B_ds2 = LstarInfo->mInfo->d2B_ds2; // second deriv of B wrt s at equator.
MagEphemInfo->RofC = LstarInfo->mInfo->RofC; // radius of curvature at Bmin point.
/*
* Get a simple measure of how big L is
*/
Lgm_Convert_Coords( &v1, &vv1, GSM_TO_SM, LstarInfo->mInfo->c );
Lam = asin( vv1.z/Lgm_Magnitude( &vv1 ) );
CosLam = cos( Lam );
//LSimple = (1.0+LstarInfo->mInfo->Lgm_LossConeHeight/WGS84_A)/( CosLam*CosLam );
LSimple = Lgm_Magnitude( &LstarInfo->mInfo->Pmin );
{ // ***** BEGIN PARALLEL EXECUTION *****
/*
* Do all of the PAs in parallel. To control how many threads get run
* use the enironment variable OMP_NUM_THREADS. For example,
* setenv OMP_NUM_THREADS 8
* will use 8 threads to do the loop in parallel. Be very careful what gets
* set private here -- the threads must not interfere with each other.
*/
#if USE_OPENMP
#pragma omp parallel private(LstarInfo2,LstarInfo3,sa,sa2,LS_Flag,nn,tk,PreStr,PostStr)
#pragma omp for schedule(dynamic, 1)
#endif
for ( i=0; i<MagEphemInfo->nAlpha; i++ ){ // LOOP OVER PITCH ANGLES
/*
* make a local copy of LstarInfo structure -- needed for multi-threading
*/
LstarInfo3 = Lgm_CopyLstarInfo( LstarInfo );
/*
* colorize the diagnostic messages.
*/
if ( Colorize ){
sprintf( LstarInfo3->PreStr, "\033[38;5;%dm", Colors[i%9]); sprintf( LstarInfo3->PostStr, "\033[0m");
} else {
LstarInfo3->PreStr[0] = '\0'; LstarInfo3->PostStr[0] = '\0';
}
PreStr = LstarInfo3->PreStr; PostStr = LstarInfo3->PostStr;
/*
* Set Bmirror
*/
LstarInfo3->mInfo->Bm = MagEphemInfo->Bm[i];
NewTimeLstarInfo( Date, UTC, MagEphemInfo->Alpha[i], LstarInfo3->mInfo->Bfield, LstarInfo3 );
/*
* Compute L*
*/
if ( LSimple < LstarInfo3->LSimpleMax ){
LstarInfo2 = Lgm_CopyLstarInfo( LstarInfo3 );
LstarInfo2->mInfo->Bm = LstarInfo3->mInfo->Bm;
if (LstarInfo3->VerbosityLevel >= 2 ) {
printf("\n\n\t\t%sComputing L* for: UTC = %g (Local) PA = %d (%g)%s\n", PreStr, UTC, i, MagEphemInfo->Alpha[i], PostStr );
//printf(" \t\t%s I = %g PA = %d (%g)%s\n", PreStr, MagEphemInfo->I[i], i, MagEphemInfo->Alpha[i], PostStr );
}
//////////////////////////////NOTE
//////////////////////////////NOTE We are giving Lstar the Min B point ALREADY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
//////////////////////////////NOTE
//////////////////////////////NOTE
//////////////////////////////NOTE
//printf("LstarInfo2->mInfo->Bm = %g\n", LstarInfo2->mInfo->Bm);
LS_Flag = Lstar( &v3, LstarInfo2);
if (LstarInfo3->VerbosityLevel >= 2 ) {
printf("\t\t%sUTC, L* = %g %g%s\n", PreStr, UTC, LstarInfo2->LS, PostStr );
printf("\t\t%sUTC, L*_McIlwain = %g %g%s\n", PreStr, UTC, LstarInfo2->LS_McIlwain_M, PostStr );
printf("\t\t%sUTC, LSimple = %g %g%s\n\n\n", PreStr, UTC, LSimple, PostStr );
}
MagEphemInfo->Lstar[i] = ( LS_Flag >= 0 ) ? LstarInfo2->LS : LGM_FILL_VALUE;
MagEphemInfo->I[i] = LstarInfo2->I[0]; // I[0] is I for the FL that the sat is on.
MagEphemInfo->K[i] = LstarInfo2->I[0]*sqrt(MagEphemInfo->Bm[i]*1e-5); // Second invariant
MagEphemInfo->Sb[i] = LstarInfo2->SbIntegral0; // SbIntegral0 is Sb for the FL that the sat is on.
/*
* Determine the type of the orbit
*/
if ( LS_Flag >= 0 ) {
LstarInfo2->DriftOrbitType = LGM_DRIFT_ORBIT_CLOSED;
for ( k=0; k<LstarInfo2->nMinMax; ++k ) {
if ( LstarInfo2->nMinima[k] > 1 ) LstarInfo2->DriftOrbitType = LGM_DRIFT_ORBIT_CLOSED_SHABANSKY;
}
} else {
LstarInfo2->DriftOrbitType = LGM_DRIFT_ORBIT_OPEN;
for ( k=0; k<LstarInfo2->nMinMax; ++k ) {
if ( LstarInfo2->nMinima[k] > 1 ) LstarInfo2->DriftOrbitType = LGM_DRIFT_ORBIT_OPEN_SHABANSKY;
}
}
MagEphemInfo->DriftOrbitType[i] = LstarInfo2->DriftOrbitType;
//printf("\t %sL* [ %g Deg. ]: Date: %ld UTC: %g Lsimple:%g L*:%.15g%s\n", PreStr, MagEphemInfo->Alpha[i], Date, UTC, LSimple, LstarInfo2->LS, PostStr );
if (LstarInfo3->VerbosityLevel > 0 ) {
printf("\t %sL* [ %g\u00b0 ]: Date: %ld UTC: %g Lsimple:%g L*:%.15g%s\n", PreStr, MagEphemInfo->Alpha[i], Date, UTC, LSimple, LstarInfo2->LS, PostStr );
}
/*
* Save detailed results to the MagEphemInfo structure.
*/
MagEphemInfo->nShellPoints[i] = LstarInfo2->nPnts;
for (nn=0; nn<LstarInfo2->nPnts; nn++ ){
MagEphemInfo->Shell_Pmin[i][nn] = LstarInfo2->Pmin[nn];
MagEphemInfo->Shell_Bmin[i][nn] = LstarInfo2->Bmin[nn];
MagEphemInfo->Shell_GradI[i][nn] = LstarInfo2->GradI[nn];
MagEphemInfo->Shell_Vgc[i][nn] = LstarInfo2->Vgc[nn];
MagEphemInfo->ShellI[i][nn] = LstarInfo2->I[nn];
MagEphemInfo->ShellSphericalFootprint_Pn[i][nn] = LstarInfo2->Spherical_Footprint_Pn[nn];
MagEphemInfo->ShellSphericalFootprint_Sn[i][nn] = LstarInfo2->Spherical_Footprint_Sn[nn];
MagEphemInfo->ShellSphericalFootprint_Bn[i][nn] = LstarInfo2->Spherical_Footprint_Bn[nn];
MagEphemInfo->ShellSphericalFootprint_Ps[i][nn] = LstarInfo2->Spherical_Footprint_Ps[nn];
MagEphemInfo->ShellSphericalFootprint_Ss[i][nn] = LstarInfo2->Spherical_Footprint_Ss[nn];
MagEphemInfo->ShellSphericalFootprint_Bs[i][nn] = LstarInfo2->Spherical_Footprint_Bs[nn];
MagEphemInfo->ShellEllipsoidFootprint_Pn[i][nn] = LstarInfo2->Ellipsoid_Footprint_Pn[nn];
MagEphemInfo->ShellEllipsoidFootprint_Sn[i][nn] = LstarInfo2->Ellipsoid_Footprint_Sn[nn];
MagEphemInfo->ShellEllipsoidFootprint_Bn[i][nn] = LstarInfo2->Ellipsoid_Footprint_Bn[nn];
MagEphemInfo->ShellEllipsoidFootprint_Ps[i][nn] = LstarInfo2->Ellipsoid_Footprint_Ps[nn];
MagEphemInfo->ShellEllipsoidFootprint_Ss[i][nn] = LstarInfo2->Ellipsoid_Footprint_Ss[nn];
MagEphemInfo->ShellEllipsoidFootprint_Bs[i][nn] = LstarInfo2->Ellipsoid_Footprint_Bs[nn];
MagEphemInfo->ShellMirror_Pn[i][nn] = LstarInfo2->Mirror_Pn[nn];
//MagEphemInfo->ShellMirror_Sn[i][nn] = LstarInfo2->mInfo->Sm_North;
MagEphemInfo->ShellMirror_Sn[i][nn] = LstarInfo2->Mirror_Sn[nn];
MagEphemInfo->ShellMirror_Ps[i][nn] = LstarInfo2->Mirror_Ps[nn];
//MagEphemInfo->ShellMirror_Ss[i][nn] = LstarInfo2->mInfo->Sm_South;
MagEphemInfo->ShellMirror_Ss[i][nn] = LstarInfo2->Mirror_Ss[nn];
/*
* Save all of the drift shell FLs in MagEphemInfo structure
*/
MagEphemInfo->nFieldPnts[i][nn] = LstarInfo2->nFieldPnts[nn];
for (tk=0; tk<LstarInfo2->nFieldPnts[nn]; tk++){ // loop over points in a FL
MagEphemInfo->s_gsm[i][nn][tk] = LstarInfo2->s_gsm[nn][tk];
MagEphemInfo->Bmag[i][nn][tk] = LstarInfo2->Bmag[nn][tk];
MagEphemInfo->x_gsm[i][nn][tk] = LstarInfo2->x_gsm[nn][tk];
MagEphemInfo->y_gsm[i][nn][tk] = LstarInfo2->y_gsm[nn][tk];
MagEphemInfo->z_gsm[i][nn][tk] = LstarInfo2->z_gsm[nn][tk];
}
//printf("LstarInfo2->nFieldPnts[%d] = %d\n", nn, LstarInfo2->nFieldPnts[nn]);
MagEphemInfo->nMinima[i][nn] = LstarInfo2->nMinima[nn];
MagEphemInfo->nMaxima[i][nn] = LstarInfo2->nMaxima[nn];
}
FreeLstarInfo( LstarInfo2 );
} else {
printf(" Lsimple >= %g ( Not doing L* calculation )\n", LstarInfo3->LSimpleMax );
MagEphemInfo->Lstar[i] = LGM_FILL_VALUE;
//printf("Bm = %g\n", MagEphemInfo->Bm[i]);
MagEphemInfo->I[i] = LGM_FILL_VALUE;
MagEphemInfo->K[i] = LGM_FILL_VALUE;
MagEphemInfo->nShellPoints[i] = 0;
}
FreeLstarInfo( LstarInfo3 );
}
}
// ***** END PARALLEL EXECUTION *****
}
return;
}
int Lgm_TraceToSphericalEarth( Lgm_Vector *u, Lgm_Vector *v, double TargetHeight, double sgn, double tol, Lgm_MagModelInfo *Info ) {
Lgm_Vector u_scale;
double Htry, Htry_max, Hdid, Hnext, Hmin, Hmax, s;
double Sa=0.0, Sc=0.0, d;
double Rinitial, Fa, Fb, Fc, F;
double Height, StartHeight;
double Height_a, Height_b, Height_c, HeightPlus, HeightMinus, direction;
Lgm_Vector Pa, Pc, P;
int done, reset, AboveTargetHeight, Count;
reset = TRUE;
Info->Trace_s = 0.0;
Sa = Sc = 0.0;
/*
* Determine our initial geocentric radius in km. (u is assumed to be in
* units of Re where we define Re to be WGS84_A.)
*/
Rinitial = WGS84_A*Lgm_Magnitude( u ); // km
/*
* The Earth is a spheroid. It is more flattened at the poles than at the
* equator. Check to see if we are initially at a height where we need to
* worry about it. For WGS84 Earth shape model, the equatorial radius is
* WGS84_A and polar radius is WGS84_B (WGS84_B is about 20km smaller than
* WGS84_A).
*
* Note that although we are trying to trace to a spherical Earth in this
* routine, we still dont want to drop below the surface of the real Earth
* (IGRF doesnt like that so much).
*
*/
if ( Rinitial < WGS84_B ) {
// must be inside the Earth, which is no good -- bail with
// LGM_INSIDE_EARTH error code
return( LGM_INSIDE_EARTH );
} else {
// We are at least at or above WGS84_B. We could still be in trouble in
// terms of being inside the Earth, so we have to check more
// thouroughly now. Determine Geodetic Height
Lgm_WGS84_to_GeodHeight( u, &Height );
if ( Height < 0.0 ) {
// inside the Earth, which is no good -- bail with error
return( LGM_INSIDE_EARTH );
}
}
/*
* If we get here, the initial point must be above the surface of the
* (spheroidal) Earth.
*
* Now check to see if we are currently above or below the target height.
* (reset Height to be distance in km above the spherical approx of the Earth.)
*/
Height = Rinitial - WGS84_A; // distance above spherical Earth
AboveTargetHeight = ( Height > TargetHeight ) ? TRUE : FALSE;
/*
* Initialize some things
*/
Pa.x = Pa.y = Pa.z = 0.0;
Pc.x = Pc.y = Pc.z = 0.0;
P = *u;
Hmax = Info->Hmax;
Hmax = 1.0;
Hmin = 0.001;
Hmin = 1e-8;
u_scale.x = u_scale.y = u_scale.z = 1.0;
Height = Height_a = Height_b = Height_c = 0.0;
F = Fa = Fb = Fc = 0.0;
//printf("\nHmax = %g\n", Hmax);
/*
* Save initial point if we need to
*/
if (Info->SavePoints) fprintf(Info->fp, "%f \t%f\t %f\t 3\n", u->x, u->y, u->z);
/*
* If we are above the target height, a potential problem will occur if the
* field line is open in the direction of tracing. Fortunately, that
* situation is easy to detect and is taken care of later...
*
* Here we need to test for and deal with the opposite problem. If we are
* already below the target height, it is possible that the field line
* never gets high enough to reach the target height. This is more tricky
* to deal with because we can run the risk of getting below the surface of
* the Earth. We need to try to get back above the target height to test
* for this. If we cannot get above we need to bail out of the routine
* altogether.
*/
StartHeight = Height;
if ( !AboveTargetHeight ) {
/*
* Determine which direction along the field line will take us higher.
*/
Htry = 0.001;
// sgn = +1
P = *u;
if ( Lgm_MagStep( &P, &u_scale, Htry, &Hdid, &Hnext, 1.0, &s, &reset, Info->Bfield, Info ) < 0 ) return(-1);
HeightPlus = WGS84_A*(Lgm_Magnitude( &P )-1.0);
// sgn = -1
P = *u;
if ( Lgm_MagStep( &P, &u_scale, Htry, &Hdid, &Hnext, -1.0, &s, &reset, Info->Bfield, Info ) < 0 ) return(-1);
HeightMinus = WGS84_A*(Lgm_Magnitude( &P )-1.0);
direction = ( HeightPlus > HeightMinus ) ? 1.0 : -1.0;
/*
* We are already at or below target height. Trace until we are not.
*/
done = FALSE;
//reset = TRUE;
while ( !done ) {
Htry = fabs(0.9*(TargetHeight - Height)); // This computes Htry as 90% of the distance to the TargetHeight
if (Htry > 0.1) Htry = 0.1; // If its bigger than 0.1 reset it to 0.1 -- to be safe.
if ( Lgm_MagStep( &P, &u_scale, Htry, &Hdid, &Hnext, direction, &s, &reset, Info->Bfield, Info ) < 0 ) return(-1);
//printf("1. PPPPPPPPPP = %g %g %g\n", P.x, P.y, P.z);
Sa += Hdid;
Info->Trace_s += Hdid;
Height = WGS84_A*(Lgm_Magnitude( &P )-1.0);
F = Height - TargetHeight;
if ( F > 0.0 ) {
done = TRUE;
} else if ( Height < StartHeight ) {
// We are going back down again -- Target Height unreachable? -- Bail out
return( LGM_TARGET_HEIGHT_UNREACHABLE );
}
}
}
/*
* Bracket the zero first.
* We want to stop in the ionosphere at a certain height above the Earth
* (assumed to be a spehere of radius WGS84_A in this routine). We need
* to find 2 points along the field line such that the intersection of the
* FL with the sphere is guaranteed to lie between them. To do this, we
* need to find two points; Pa and Pc such that;
*
* and Height( Pa ) - TargetHeight > 0.0
* and Height( Pc ) - TargetHeight < 0.0
*
* I.e., F = Height - TargetHeight has opposite signs
*
* Set the start point, Pa and Fa. (Fa is difference between Height_a and
* TargetHeight.)
*
*/
Pa = P;
Height_a = WGS84_A*(Lgm_Magnitude( &Pa )-1.0);
Fa = Height_a - TargetHeight;
/*
* Get an initial Htry that is safe -- i.e. start off slowly
* We dont really know where we are, so be conservative on the first try.
* If if ( Lgm_MagStep() gives back an Hnext thats higher, we'll crank Htry up then...
*/
Htry = 0.9*Height_a; // This computes Htry as 90% of the distance to the Earth's surface (could be small if we are already close!)
if (Htry > Hmax) Htry = Hmax; // If its bigger than Hmax reset it to Hmax -- to be safe.
/*
* Keep stepping along the field line until we drop below the target
* height, TargetHeight. (Or bail if its open). This completes the endpoints of the
* bracket pair. We get these points first, because there are field lines
* that have more than one local minimum in fabs(Height-TargetHeight). So find Pa and Pc
* first and then complete the triple later. CHECK on this. I changed this
* from a minima search to a simple root finder. Is it OK still?
*/
P = Pa;
done = FALSE;
//reset = TRUE;
Count = 0;
while ( !done ) {
if ( Lgm_MagStep( &P, &u_scale, Htry, &Hdid, &Hnext, sgn, &s, &reset, Info->Bfield, Info ) < 0 ) return(-1);
Height = WGS84_A*(Lgm_Magnitude( &P )-1.0);
//Lgm_Vector BBBBB;
//Info->Bfield( &P, &BBBBB, Info );
//printf("2. PPPPPPPPPP = %g %g %g BBBBBBBBBB = %g %g %g Height = %g HTRY = %g HDID = %g HNEXT = %g\n", P.x, P.y, P.z, BBBBB.x, BBBBB.y, BBBBB.z, Height, Htry, Hdid, Hnext);
F = Height - TargetHeight;
if ((F > 0.0) && (Info->SavePoints)) fprintf(Info->fp, "%f \t%f\t %f\t 2\n", P.x, P.y, P.z);
if ( (P.x > Info->OpenLimit_xMax) || (P.x < Info->OpenLimit_xMin) || (P.y > Info->OpenLimit_yMax) || (P.y < Info->OpenLimit_yMin)
|| (P.z > Info->OpenLimit_zMax) || (P.z < Info->OpenLimit_zMin) || ( s > 1000.0 ) ) {
/*
* Open FL!
*/
v->x = v->y = v->z = 0.0;
return(0);
} else if ( F < 0.0 ) {
done = TRUE;
Pc = P;
Fc = F;
Height_c = Height;
//Sc += Hdid;
Sc = Sa + Hdid;
} else {
Pa = P;
Fa = F;
Height_a = Height;
Sa += Hdid;
}
//if ( fabs(Hdid-Htry) > 1e-6 ) Htry = Hnext; // adaptively reset Htry
Htry = Hnext; // adaptively reset Htry
//printf("A. Htry = %g\n", Htry);
/*
* Go no farther than some small distance below
* the target Height. Also respect Hmin and Hmax.
*/
Htry_max = 0.9*Height;
if (Htry > Htry_max) Htry = Htry_max;
//printf("B. Htry = %g Htry, Hmin, Hmax, Htry_max = %g %g %g %g\n", Htry, Htry, Hmin, Hmax, Htry_max);
if (Htry < Hmin) Htry = Hmin;
else if (Htry > Hmax) Htry = Hmax;
//printf("C. Htry = %g\n", Htry);
if ( Count > 1000) {
printf("File: %s Lgm_TraceToSphericalEarth(), Line: %d; Too many iterations trying to reach target height (are we in a weird field region?) Returning with -1.\n", __FILE__, __LINE__ );
//exit(0);
return(-1);
}
++Count;
}
if ( ((Fc > 0.0) && (Fa > 0.0)) || ((Fc < 0.0) && (Fa < 0.0)) ) {
// No bracket
return(0);
}
/*
* We have a bracket. Now go in for the kill.
*
* (Note: If all we wanted to know is whether or not the line hits the
* TargetHeight, we could stop here: it must or we wouldnt have a minimum
* bracketed.)
*
* Use golden-section search to converge toward minimum.
* (Sa, Sb, Sc) are the distances of the triple points along
* the FL. For convenience, we maintain Sa = 0.0, so that
* Sb and Sc are always the distances relative to Pa. (And
* so Sc is always the width of the bracketed interval. So when
* Sc gets small enough we bail out and take Pb as the min).
*
*/
//reset = TRUE;
if (1==1) {
done = FALSE;
while (!done) {
d = Sc - Sa;
//if ( fabs(F) < tol ) {
if ( fabs(d) < tol ) {
done = TRUE;
} else {
P = Pa; //Htry = LGM_1M_1O_GOLD*d; // LGM_1M_1O_GOLD is 0.381966...
// if ( Htry > 2.0*fabs(F) ) {
//Htry = LGM_1M_1O_GOLD*d; // LGM_1M_1O_GOLD is 0.381966...
Htry = 0.5*fabs(d); // LGM_1M_1O_GOLD is 0.381966...
// }
if ( Lgm_MagStep( &P, &u_scale, Htry, &Hdid, &Hnext, sgn, &s, &reset, Info->Bfield, Info ) < 0 ) return(-1);
//printf("3. PPPPPPPPPP = %g %g %g HTRY = %g\n", P.x, P.y, P.z, Htry);
Height = WGS84_A*(Lgm_Magnitude( &P )-1.0);
F = Height - TargetHeight;
if ( F >= 0.0 ) {
Pa = P;
Fa = F;
Sa += Hdid;
} else {
Pc = P;
Fc = F;
Sc = Sa + Hdid;
}
}
}
Info->Trace_s = Sa;
/*
* Take average as the final answer.
*/
v->x = 0.5*(Pa.x + Pc.x);
v->y = 0.5*(Pa.y + Pc.y);
v->z = 0.5*(Pa.z + Pc.z);
//printf( "Lgm_TraceToSphericalEarth: v = %g %g %g\n", v->x, v->y, v->z);
}
if (0==1) {
/*
* Try Brent's method
*/
//printf("Sa, Sb = %g %g Fa, Fb = %g %g tol = %g\n", Sa, Sb, Fa, Fb, tol);
double Sz, Fz;
Lgm_Vector Pz;
BrentFuncInfoP f;
f.u_scale = u_scale;
f.Htry = Htry;
f.sgn = sgn;
f.reset = reset;
f.Info = Info;
f.func = &seFunc;
f.Val = TargetHeight;
Lgm_zBrentP( Sa, Sc, Fa, Fc, Pa, Pc, &f, tol, &Sz, &Fz, &Pz );
Fc = Fz;
Sc = Sz;
Pc = Pz;
//printf("Sa, Sb = %g %g Fa, Fb = %g %g tol = %g\n", Sa, Sb, Fa, Fb, tol);
v->x = Pz.x;
v->y = Pz.y;
v->z = Pz.z;
Info->Trace_s = Sz;
}
if (Info->SavePoints) fprintf(Info->fp, "%f \t%f\t %f\t 2\n", v->x, v->y, v->z);
if ( Info->VerbosityLevel > 2 ) printf("Lgm_TraceToSphericalEarth(): Number of Bfield evaluations = %ld\n", Info->Lgm_nMagEvals );
return( 1 );
}
/**
* \brief
* Compute the gradient of B at a given point.
*
* \details
* Computes \f$ \nabla B \f$.
*
*
* \param[in] u0 Position (in GSM) to use.
* \param[out] GradB The computed gradient of B at position u0.
* \param[in] DerivScheme Derivative scheme to use (can be one of LGM_DERIV_SIX_POINT, LGM_DERIV_FOUR_POINT, or LGM_DERIV_TWO_POINT).
* \param[in] h The delta (in Re) to use for grid spacing in the derivative scheme.
* \param[in,out] m A properly initialized and configured Lgm_MagModelInfo structure.
*
*
* \author Mike Henderson
* \date 2011
*
*/
void Lgm_GradB( Lgm_Vector *u0, Lgm_Vector *GradB, int DerivScheme, double h, Lgm_MagModelInfo *m ) {
double B, H, fx[7], fy[7], fz[7];
int i, N;
Lgm_Vector u, Bvec;
/*
* Select the derivative scheme to use.
* f_0^(1) = 1/(60h) ( f_3 - 9f_2 + 45f_1 - 45f_-1 + 9f_-2 - f_-3 )
* See page 450 of CRC standard Math tables 28th edition.
*/
switch ( DerivScheme ) {
case LGM_DERIV_SIX_POINT:
N = 3;
break;
case LGM_DERIV_FOUR_POINT:
N = 2;
break;
case LGM_DERIV_TWO_POINT:
N = 1;
break;
}
if (m->VerbosityLevel > 0) printf("\t\tLgm_GradB: Computing GradB with DerivScheme = %d, h = %g", DerivScheme, h);
for (i=-N; i<=N; ++i){
if ( N != 0 ) {
u = *u0; H = (double)i*h; u.x += H;
m->Bfield( &u, &Bvec, m );
B = Lgm_Magnitude( &Bvec );
fx[i+N] = B;
}
}
for (i=-N; i<=N; ++i){
if ( N != 0 ) {
u = *u0; H = (double)i*h; u.y += H;
m->Bfield( &u, &Bvec, m );
B = Lgm_Magnitude( &Bvec );
fy[i+N] = B;
}
}
for (i=-N; i<=N; ++i){
if ( N != 0 ) {
u = *u0; H = (double)i*h; u.z += H;
m->Bfield( &u, &Bvec, m );
B = Lgm_Magnitude( &Bvec );
fz[i+N] = B;
}
}
if (DerivScheme == LGM_DERIV_SIX_POINT){
GradB->x = (fx[6] - 9.0*fx[5] + 45.0*fx[4] - 45.0*fx[2] + 9.0*fx[1] - fx[0])/(60.0*h);
GradB->y = (fy[6] - 9.0*fy[5] + 45.0*fy[4] - 45.0*fy[2] + 9.0*fy[1] - fy[0])/(60.0*h);
GradB->z = (fz[6] - 9.0*fz[5] + 45.0*fz[4] - 45.0*fz[2] + 9.0*fz[1] - fz[0])/(60.0*h);
} else if (DerivScheme == LGM_DERIV_FOUR_POINT){
GradB->x = (-fx[4] + 8.0*fx[3] - 8.0*fx[1] + fx[0])/(12.0*h);
GradB->y = (-fy[4] + 8.0*fy[3] - 8.0*fy[1] + fy[0])/(12.0*h);
GradB->z = (-fz[4] + 8.0*fz[3] - 8.0*fz[1] + fz[0])/(12.0*h);
} else if (DerivScheme == LGM_DERIV_TWO_POINT){
GradB->x = (fx[2] - fx[0])/(2.0*h);
GradB->y = (fy[2] - fy[0])/(2.0*h);
GradB->z = (fz[2] - fz[0])/(2.0*h);
}
if (m->VerbosityLevel > 0) printf(" GradB = (%g %g %g)\n", GradB->x, GradB->y, GradB->z );
return;
}
/*
* Note: The variables that save our state in this (and other fundtions) are
* not local static variables, but are contained in the Lgm_MagModelInfo
* structure that the user passes to it. This allows the function to be
* thread-safe and re-entrant.
*/
double I_integrand( double s, _qpInfo *qpInfo ) {
Lgm_Vector Bvec;
int reset=1, done, Count;
double f, g, Hremaining, Hdone, H, Htry, Hdid, Hnext, sgn=1.0, sdid, B, dS;
Lgm_MagModelInfo *mInfo;
/*
* Get pointer to our auxilliary data structure.
*/
mInfo = (Lgm_MagModelInfo *)qpInfo;
mInfo->Lgm_I_integrand_u_scale.x = 10.0; mInfo->Lgm_I_integrand_u_scale.y = 1.0; mInfo->Lgm_I_integrand_u_scale.z = 10.0;
if ( mInfo->Lgm_I_integrand_JumpMethod == LGM_RELATIVE_JUMP_METHOD ) {
/*
* Set starting point. If this is the first call for this integral,
* set point to the lower limit.
*/
if ( mInfo->Lgm_I_integrand_FirstCall == TRUE ) {
mInfo->Lgm_I_integrand_FirstCall = FALSE;
mInfo->Lgm_I_integrand_P = mInfo->Pm_South;
mInfo->Lgm_I_integrand_S = 0.0;
dS = s;
} else {
dS = s - mInfo->Lgm_I_integrand_S;
}
if (dS < 0.0) {
H = -dS; sgn = -1.0; // H is a positive qnty
} else {
H = dS; sgn = 1.0;
}
} else if ( mInfo->Lgm_I_integrand_JumpMethod == LGM_ABSOLUTE_JUMP_METHOD ) {
/*
* This strategy starts at start each time. Slower(?), but seems to
* limit roundoff error from accumulating? The speed increase of the
* relative method really depends on how far apart the s points are
* that the integrator is picking. If they are bouncing all over the
* place the relative method still does alot of tracing.
*/
if ( mInfo->Lgm_I_integrand_FirstCall == TRUE ) {
mInfo->Lgm_I_integrand_FirstCall = FALSE;
}
mInfo->Lgm_I_integrand_P = mInfo->Pm_South;
mInfo->Lgm_I_integrand_S = 0.0;
H = s; sgn = 1.0; // H is a positive qnty
} else {
printf("I_integrand: Error, unknown Jump Method ( Lgm_I_integrand_JumpMethod = %d\n", mInfo->Lgm_I_integrand_JumpMethod );
exit(-1);
}
/*
* Get B-field at the given value of s. Need to advance along field line
* by an amount H. May need to do more than one call to get there...
* Setting Htry to be H is an attempt to make the full jump in one call to
* MagStep. For very precise calculations, the number of jumps we do here
* seems to be fairly critical. Making two jumps (i.e. Htry = H/2) and
* limiting Hmax to 0.5 Re seems to work pretty well (perhaps its because
* symetry between mirror points?). Could still play with the max step
* size of 0.5 -- maybe something a bit higher would work just as well and
* be more efficient?
*/
done = FALSE; Count = 0; Htry = 0.5*H; Hdone = 0.0; reset = TRUE;
if (Htry > 0.5) Htry = 0.5;
if ( fabs(mInfo->Lgm_I_integrand_S-s) < 1e-12 ) done = TRUE;
while ( !done ) {
Lgm_MagStep( &mInfo->Lgm_I_integrand_P, &mInfo->Lgm_I_integrand_u_scale, Htry, &Hdid, &Hnext, sgn, &sdid, &reset, mInfo->Bfield, mInfo );
Hdone += Hdid; // positive qnty
mInfo->Lgm_I_integrand_S += sgn*Hdid;
Hremaining = H - Hdone;
if ( Count > 1000 ) {
printf("I_integrand: Warning, early return because Count > 1000. Ill-conditioned integrand?\n");
done = TRUE;
} else if ( fabs(mInfo->Lgm_I_integrand_S-s) < 1e-12 ){
done = TRUE;
} else {
if ( Htry > Hremaining ) Htry = Hremaining;
}
++Count;
}
mInfo->Bfield( &mInfo->Lgm_I_integrand_P, &Bvec, mInfo );
B = Lgm_Magnitude( &Bvec );
/*
* Compute integrand, ( 1 - B/Bm ) ^ (1/2) Make sure 1-B/Bm is not
* negative. If it is, assume its zero. (Note that sometimes (due to
* round-off error) it could be very slightly negative).
*/
g = 1.0 - B/mInfo->Bm;
f = (g > 0.0) ? sqrt( g ) : 0.0;
++mInfo->Lgm_n_I_integrand_Calls;
return( f );
}
/*
* Compute Gradient of I
*/
int Lgm_Grad_I( Lgm_Vector *v0, Lgm_Vector *GradI, Lgm_MagModelInfo *mInfo ) {
Lgm_Vector u, Pa, Pb;
double rat, H, h, a, b, SS, Sa, Sb, I, f[6], r;
int i, N;
/*
* We want to compute the gradient of I at the point v0.
* This requires 3 derivatives: one each in x, y and z directions.
* We will try a fairly acurate difference scehme:
*
* f_0^(1) = 1/(60h) ( f_3 - 9f_2 + 45f_1 - 45f_-1 + 9f_-2 - f_-3 )
* See page 450 of CRC standard Math tables 28th edition.
*/
/*
* Set h to a smallish value
*/
// h = 5e-2;
h = 0.1;
// h = 0.2;
switch ( DIFF_SCHEME ) {
case USE_SIX_POINT:
N = 3;
break;
case USE_FOUR_POINT:
N = 2;
break;
case USE_TWO_POINT:
N = 1;
break;
}
// User should set these?
mInfo->Lgm_I_Integrator = DQAGS;
mInfo->Lgm_I_Integrator_epsabs = 0.0;
mInfo->Lgm_I_Integrator_epsrel = 1e-5;
/* X-component */
mInfo->UseInterpRoutines = 1;
if (mInfo->VerbosityLevel > 0) printf("\t\tComputing dIdx: h = %g\n", h);
for (i=-N; i<=N; ++i){
if (i!=0) { // dont need the center value in our difference scheme
u = *v0; H = (double)i*h; u.x += H;
/*
* Trace to southern mirror point
*/
if ( Lgm_TraceToMirrorPoint( &u, &Pa, &Sa, mInfo->Bm, -1.0, mInfo->Lgm_TraceToMirrorPoint_Tol, mInfo ) > 0 ) {
/*
* Trace to northern mirror point
*/
if ( Lgm_TraceToMirrorPoint( &Pa, &Pb, &SS, mInfo->Bm, 1.0, mInfo->Lgm_TraceToMirrorPoint_Tol, mInfo ) > 0 ) {
r = Lgm_Magnitude( &Pb );
//mInfo->Hmax = SS/200.0;
mInfo->Hmax = SS/(double)mInfo->nDivs;
Lgm_TraceLine2( &Pa, &Pb, (r-1.0)*Re, 0.5*SS-mInfo->Hmax, 1.0, 1e-7, FALSE, mInfo );
ReplaceFirstPoint( 0.0, mInfo->Bm, &Pa, mInfo );
AddNewPoint( SS, mInfo->Bm, &Pb, mInfo );
InitSpline( mInfo );
mInfo->Lgm_I_integrand_S = 0.0;
mInfo->Lgm_I_integrand_FirstCall = TRUE;
mInfo->Lgm_n_I_integrand_Calls = 0;
mInfo->Sm_South = 0.0;
mInfo->Sm_North = SS;
if ( SS <= 1e-5 ) {
// if FL length is small, use an approx expression for I
rat = mInfo->Bmin/mInfo->Bm;
if ((1.0-rat) < 0.0) {
I = 0.0;
} else {
// Eqn 2.66b in Roederer
I = SS*sqrt(1.0 - rat);
printf("HEREEEEEEEEEEEEEEEEEEEEEEe\n");
}
} else {
I = Iinv_interped( mInfo );
}
if (mInfo->VerbosityLevel > 2) printf("I = %g Lgm_n_I_integrand_Calls = %d\n", I, mInfo->Lgm_n_I_integrand_Calls );
FreeSpline( mInfo );
} else {
printf("\t\tMirror point below %g km in Southern Hemisphere\n", mInfo->Lgm_LossConeHeight);
exit(0);
}
} else {
printf("\t\tMirror point below %g km in Northern Hemisphere\n", mInfo->Lgm_LossConeHeight);
exit(0);
}
f[i+N] = I;
}
}
if (DIFF_SCHEME == USE_SIX_POINT){
GradI->x = (f[6] - 9.0*f[5] + 45.0*f[4] - 45.0*f[2] + 9.0*f[1] - f[0])/(60.0*h);
} else if (DIFF_SCHEME == USE_FOUR_POINT){
GradI->x = (-f[4] + 8.0*f[3] - 8.0*f[1] + f[0])/(12.0*h);
} else if (DIFF_SCHEME == USE_TWO_POINT){
GradI->x = (f[2] - f[0])/(2.0*h);
}
/* Y-component */
if (mInfo->VerbosityLevel > 0) printf("\t\tComputing dIdy: h = %g\n", h);
for (i=-N; i<=N; ++i){
if (i!=0) { // dont need the center value in our difference scheme
u = *v0; H = (double)i*h; u.y += H;
/*
* Trace to southern mirror point
*/
if ( Lgm_TraceToMirrorPoint( &u, &Pa, &Sa, mInfo->Bm, -1.0, mInfo->Lgm_TraceToMirrorPoint_Tol, mInfo ) > 0 ) {
/*
* Trace to northern mirror point
*/
if ( Lgm_TraceToMirrorPoint( &Pa, &Pb, &SS, mInfo->Bm, 1.0, mInfo->Lgm_TraceToMirrorPoint_Tol, mInfo ) > 0 ) {
r = Lgm_Magnitude( &Pb );
//mInfo->Hmax = SS/200.0;
mInfo->Hmax = SS/(double)mInfo->nDivs;
Lgm_TraceLine2( &Pa, &Pb, (r-1.0)*Re, 0.5*SS-mInfo->Hmax, 1.0, 1e-7, FALSE, mInfo );
ReplaceFirstPoint( 0.0, mInfo->Bm, &Pa, mInfo );
AddNewPoint( SS, mInfo->Bm, &Pb, mInfo );
InitSpline( mInfo );
mInfo->Lgm_I_integrand_S = 0.0;
mInfo->Lgm_I_integrand_FirstCall = TRUE;
mInfo->Lgm_n_I_integrand_Calls = 0;
mInfo->Sm_South = 0.0;
mInfo->Sm_North = SS;
if ( SS <= 1e-5 ) {
// if FL length is small, use an approx expression for I
rat = mInfo->Bmin/mInfo->Bm;
if ((1.0-rat) < 0.0) {
I = 0.0;
} else {
// Eqn 2.66b in Roederer
I = SS*sqrt(1.0 - rat);
}
} else {
I = Iinv_interped( mInfo );
}
if (mInfo->VerbosityLevel > 2) printf("I = %g Lgm_n_I_integrand_Calls = %d\n", I, mInfo->Lgm_n_I_integrand_Calls );
FreeSpline( mInfo );
} else {
printf("\t\tMirror point below %g km in Southern Hemisphere\n", mInfo->Lgm_LossConeHeight);
exit(0);
}
} else {
printf("\t\tMirror point below %g km in Northern Hemisphere\n", mInfo->Lgm_LossConeHeight);
exit(0);
}
f[i+N] = I;
}
}
if (DIFF_SCHEME == USE_SIX_POINT){
GradI->y = (f[6] - 9.0*f[5] + 45.0*f[4] - 45.0*f[2] + 9.0*f[1] - f[0])/(60.0*h);
} else if (DIFF_SCHEME == USE_FOUR_POINT){
GradI->y = (-f[4] + 8.0*f[3] - 8.0*f[1] + f[0])/(12.0*h);
} else if (DIFF_SCHEME == USE_TWO_POINT){
GradI->y = (f[2] - f[0])/(2.0*h);
}
/* Z-component */
if (mInfo->VerbosityLevel > 0) printf("\t\tComputing dIdz: h = %g\n", h);
for (i=-N; i<=N; ++i){
if (i!=0) { // dont need the center value in our difference scheme
u = *v0; H = (double)i*h; u.z += H;
/*
* Trace to southern mirror point
*/
if ( Lgm_TraceToMirrorPoint( &u, &Pa, &Sa, mInfo->Bm, -1.0, mInfo->Lgm_TraceToMirrorPoint_Tol, mInfo ) > 0 ) {
/*
* Trace to northern mirror point
*/
if ( Lgm_TraceToMirrorPoint( &Pa, &Pb, &SS, mInfo->Bm, 1.0, mInfo->Lgm_TraceToMirrorPoint_Tol, mInfo ) > 0 ) {
r = Lgm_Magnitude( &Pb );
//mInfo->Hmax = SS/200.0;
mInfo->Hmax = SS/(double)mInfo->nDivs;
Lgm_TraceLine2( &Pa, &Pb, (r-1.0)*Re, 0.5*SS-mInfo->Hmax, 1.0, 1e-7, FALSE, mInfo );
ReplaceFirstPoint( 0.0, mInfo->Bm, &Pa, mInfo );
AddNewPoint( SS, mInfo->Bm, &Pb, mInfo );
InitSpline( mInfo );
mInfo->Lgm_I_integrand_S = 0.0;
mInfo->Lgm_I_integrand_FirstCall = TRUE;
mInfo->Lgm_n_I_integrand_Calls = 0;
mInfo->Sm_South = 0.0;
mInfo->Sm_North = SS;
if ( SS <= 1e-5 ) {
// if FL length is small, use an approx expression for I
rat = mInfo->Bmin/mInfo->Bm;
if ((1.0-rat) < 0.0) {
I = 0.0;
} else {
// Eqn 2.66b in Roederer
I = SS*sqrt(1.0 - rat);
}
} else {
I = Iinv_interped( mInfo );
}
if (mInfo->VerbosityLevel > 2) printf("I = %g Lgm_n_I_integrand_Calls = %d\n", I, mInfo->Lgm_n_I_integrand_Calls );
FreeSpline( mInfo );
} else {
printf("\t\tMirror point below %g km in Southern Hemisphere\n", mInfo->Lgm_LossConeHeight);
exit(0);
}
} else {
printf("\t\tMirror point below %g km in Northern Hemisphere\n", mInfo->Lgm_LossConeHeight);
exit(0);
}
f[i+N] = I;
}
}
if (DIFF_SCHEME == USE_SIX_POINT){
GradI->z = (f[6] - 9.0*f[5] + 45.0*f[4] - 45.0*f[2] + 9.0*f[1] - f[0])/(60.0*h);
} else if (DIFF_SCHEME == USE_FOUR_POINT){
GradI->z = (-f[4] + 8.0*f[3] - 8.0*f[1] + f[0])/(12.0*h);
} else if (DIFF_SCHEME == USE_TWO_POINT){
GradI->z = (f[2] - f[0])/(2.0*h);
}
return(0);
}
/*
* This version traces FLs from the Earth at the given MLT/mlat instead of trying to find the Bm radially out first.
*/
double ComputeI_FromMltMlat2( double Bm, double MLT, double mlat, double *r, double I0, Lgm_LstarInfo *LstarInfo ) {
int reset=1, reset2, TraceFlag;
double Bmin, I, Phi, cl, sl, rat, SS1, SS2, SS, Sn, Ss, Htry, Hdid, Hnext, Bs, Be, s, sgn;
Lgm_Vector w, u, Pmirror1, Pmirror2, v1, v2, v3, Bvec, P, Ps, u_scale, Bvectmp, Ptmp;
double stmp, Btmp;
/*
* First do a trace to identify the FL type and some of its critical points.
*/
*r = 1.0 + 100.0/Re;
Phi = 15.0*(MLT-12.0)*RadPerDeg;
cl = cos( mlat * RadPerDeg ); sl = sin( mlat * RadPerDeg );
w.x = (*r)*cl*cos(Phi); w.y = (*r)*cl*sin(Phi); w.z = (*r)*sl;
Lgm_Convert_Coords( &w, &u, SM_TO_GSM, LstarInfo->mInfo->c );
printf("w = %g %g %g\n", w.x, w.y, w.z);
TraceFlag = Lgm_Trace( &u, &v1, &v2, &v3, LstarInfo->mInfo->Lgm_LossConeHeight, 1e-6, 1e-8, LstarInfo->mInfo );
LstarInfo->mInfo->Bfield( &v3, &Bvec, LstarInfo->mInfo );
Bmin = Lgm_Magnitude( &Bvec );
printf("Got here\n");
if ( TraceFlag != LGM_CLOSED ) {
if (LstarInfo->VerbosityLevel > 1){ printf( "\t\t\t> Field Line not closed\n" ); }
return( 9e99 );
} else if ( Bmin <= Bm ) {
/*
* From the minimum B point, attempt to trace along the field to get the northern mirror point.
*/
P = v3;
SS1 = 0.0;
if ( Lgm_TraceToMirrorPoint( &P, &Pmirror1, &SS1, LstarInfo->mInfo->Bm, 1.0, LstarInfo->mInfo->Lgm_TraceToMirrorPoint_Tol, LstarInfo->mInfo ) > 0 ) {
SS2 = 0.0;
if ( Lgm_TraceToMirrorPoint( &P, &Pmirror2, &SS2, LstarInfo->mInfo->Bm, -1.0, LstarInfo->mInfo->Lgm_TraceToMirrorPoint_Tol, LstarInfo->mInfo ) > 0 ) {
} else {
if (LstarInfo->VerbosityLevel > 3){ printf( "\t\t\t> Unable to find southern mirror point\n" ); }
return( 9e99 );
}
// total distance between mirror point.
SS = SS1 + SS2;
// If its really small, just return 0.0 for I
if ( fabs(SS) < 1e-7) {
if (LstarInfo->VerbosityLevel > 3){ printf( "\t\t\t> Distance between mirror points is < 1e-7Re, Assuming I=0\n" ); }
return( 0.0 );
}
} else {
if (LstarInfo->VerbosityLevel > 3){ printf( "\t\t\t> Unable to find northern mirror point\n" ); }
return( 9e99 );
}
/*
* OK, we have both mirror points. LEts compute I
*/
I = 9e99;
LstarInfo->mInfo->Hmax = 0.1;
LstarInfo->mInfo->Hmax = SS/(double)LstarInfo->mInfo->nDivs;
/*
* This little section is attempting to solve an annoying
* precision issue. If the distance over which we are trying
* to trace is too small, too many sub-divisions (i.e. total
* steps) will lead to a step size that is too small. We can
* end up with the gridded FL points computed in
* Lgm_TraceLine3() such that the distance, s of the final
* point is very slightly less than we expect. This tries to
* reduce the number of divisions to avoid this in cases where
* the total distance to trace is very small.
*/
int nDivs;
if ( SS/LstarInfo->mInfo->nDivs < 1e-6 ) {
nDivs = SS/1e-6;
if (nDivs < 10) nDivs = 10;
} else {
nDivs = LstarInfo->mInfo->nDivs;
}
if ( Lgm_TraceLine3( &(LstarInfo->mInfo->Pm_South), SS, nDivs, 1.0, 1e-7, FALSE, LstarInfo->mInfo ) < 0 ) return( 9e99 );
/*
* Set the limits of integration.
*/
LstarInfo->mInfo->Sm_South = 0.0;
LstarInfo->mInfo->Sm_North = SS;
if ( InitSpline( LstarInfo->mInfo ) ) {
/*
* Do I integral with interped integrand.
*/
I = Iinv_interped( LstarInfo->mInfo );
if (LstarInfo->VerbosityLevel > 1) {
printf("\t\t%s mlat: %13.6g I: %13.6g I0: %13.6g I-I0: %13.6g [Sa,Sb]: %.8g %.8g (nCalls = %d)%s\n", LstarInfo->PreStr, mlat, I, I0, I-I0, LstarInfo->mInfo->Sm_South, LstarInfo->mInfo->Sm_North, LstarInfo->mInfo->Lgm_n_I_integrand_Calls, LstarInfo->PostStr );
}
FreeSpline( LstarInfo->mInfo );
} else {
I = 9e99;
}
} else {
if (LstarInfo->VerbosityLevel > 1){ printf( "\t\t\t> Field line min-B is greater than Bm. Bm = %g Bmin = %g\n", Bm, Bmin ); }
return( 9e99 );
}
return( I );
}
/*
* Input Variables:
*
* Date:
* UTC:
* brac1: Radial distance for inner edge of search bracket
* brac2: Radial distance for outer edge of search bracket
* Alpha: Equatorial pitch angle to compute
* Quality: Quality factor (0-8)
*
* Input/OutPut Variables:
* K: K value for LCDS at given alpha
* LstarInfo: LstarInfo structure to specify B-field model, store last valid Lstar, etc.
*
*/
int LCDS( long int Date, double UTC, double brac1, double brac2, double MLT, double Alpha, double tol, int Quality, double *K, Lgm_LstarInfo *LstarInfo ) {
Lgm_LstarInfo *LstarInfo_brac1, *LstarInfo_brac2, *LstarInfo_test;
Lgm_Vector v1, v2, v3, LCDSv3, Bvec, Ptest, PtestSM, Pinner, PinnerSM, Pouter, PouterSM;
double Blocal, Xtest, sa, sa2, LCDS;
double nTtoG = 1.0e-5;
int LS_Flag, nn, k, TFlag;
int maxIter = 50;
//Start by creating necessary structures... need an Lstar info for each bracket, plus test point.
LstarInfo_brac1 = Lgm_CopyLstarInfo( LstarInfo );
LstarInfo_brac2 = Lgm_CopyLstarInfo( LstarInfo );
LstarInfo_test = Lgm_CopyLstarInfo( LstarInfo );
// Set Tolerances
Lgm_SetLstarTolerances( Quality, 24, LstarInfo_brac1 );
Lgm_SetLstarTolerances( Quality, 24, LstarInfo_brac2 );
Lgm_SetLstarTolerances( Quality, 24, LstarInfo_test );
// set coord transformation
Lgm_Set_Coord_Transforms( Date, UTC, LstarInfo_brac1->mInfo->c );
Lgm_Set_Coord_Transforms( Date, UTC, LstarInfo_brac2->mInfo->c );
Lgm_Set_Coord_Transforms( Date, UTC, LstarInfo_test->mInfo->c );
//Check for closed drift shell at brackets
PinnerSM.x = brac1*cos(MLT); PinnerSM.y = brac1*sin(MLT); PinnerSM.z = 0.0;
Lgm_Convert_Coords( &PinnerSM, &Pinner, SM_TO_GSM, LstarInfo_test->mInfo->c );
/*
* Test inner bracket location.
*/
LstarInfo_brac1->mInfo->Bfield( &Pinner, &Bvec, LstarInfo_brac1->mInfo );
Blocal = Lgm_Magnitude( &Bvec );
sa = sin( LstarInfo->PitchAngle*RadPerDeg ); sa2 = sa*sa;
//Trace to minimum-B
if ( Lgm_Trace( &Pinner, &v1, &v2, &v3, 120.0, 0.01, TRACE_TOL, LstarInfo_brac1->mInfo ) == LGM_CLOSED ) {
//Only continue if bracket 1 is closed FL
//Get L*
LstarInfo_brac1->mInfo->Bm = LstarInfo_brac1->mInfo->Bmin/sa2;
LS_Flag = Lstar( &v3, LstarInfo_brac1);
LCDS = LstarInfo_brac1->LS;
*K = (LstarInfo_brac1->I0)*sqrt(Lgm_Magnitude(&LstarInfo_brac1->Bmin[0]));
if (LstarInfo->VerbosityLevel > 1) printf("Found valid inner bracket. Pinner_GSM, Pmin_GSM = (%g, %g, %g), (%g, %g, %g)\n", Pinner.x, Pinner.y, Pinner.z, LstarInfo_brac1->mInfo->Pmin.x, LstarInfo_brac1->mInfo->Pmin.y, LstarInfo_brac1->mInfo->Pmin.z);
} else {
FreeLstarInfo( LstarInfo_brac1 );
FreeLstarInfo( LstarInfo_brac2 );
FreeLstarInfo( LstarInfo_test );
return(-8); //Inner bracket is bad - bail
}
/*
* Test outer bracket location.
*/
PouterSM.x = brac2*cos(MLT); PouterSM.y = brac2*sin(MLT); PouterSM.z = 0.0;
Lgm_Convert_Coords( &PouterSM, &Pouter, SM_TO_GSM, LstarInfo_test->mInfo->c );
LstarInfo_brac2->mInfo->Bfield( &Pouter, &Bvec, LstarInfo_brac2->mInfo );
Blocal = Lgm_Magnitude( &Bvec );
//Trace to minimum-B
if ( Lgm_Trace( &Pouter, &v1, &v2, &v3, 120.0, 0.01, TRACE_TOL, LstarInfo_brac2->mInfo ) == LGM_CLOSED ) {
//If bracket 2 is closed FL then check for undefined L*. If L* is defined, we have a problem
//Get L*
LstarInfo_brac2->mInfo->Bm = LstarInfo_brac2->mInfo->Bmin/sa2;
LS_Flag = Lstar( &v3, LstarInfo_brac2);
if (LstarInfo_brac2->LS != LGM_FILL_VALUE) {
//move outer bracket out and try again
PouterSM.x = 1.7*Lgm_Magnitude(&Pouter)*cos(MLT);
PouterSM.y = 1.7*Lgm_Magnitude(&Pouter)*sin(MLT); PouterSM.z = 0.0;
Lgm_Convert_Coords( &PouterSM, &Pouter, SM_TO_GSM, LstarInfo_test->mInfo->c );
if ( Lgm_Trace( &Pouter, &v1, &v2, &v3, 120.0, 0.01, TRACE_TOL, LstarInfo_brac2->mInfo ) == LGM_CLOSED ) {
LS_Flag = Lstar( &v3, LstarInfo_brac2);
if (LstarInfo_brac2->LS != LGM_FILL_VALUE) {
FreeLstarInfo( LstarInfo_brac1 );
FreeLstarInfo( LstarInfo_brac2 );
FreeLstarInfo( LstarInfo_test );
return(-9); //Outer bracket is bad - bail
}
}
}
}
if (LstarInfo->VerbosityLevel > 1) {
printf("Found valid outer bracket. Pouter_GSM, Pmin_GSM = (%g, %g, %g), (%g, %g, %g)\n", Pouter.x, Pouter.y, Pouter.z, LstarInfo_brac2->mInfo->Pmin.x, LstarInfo_brac2->mInfo->Pmin.y, LstarInfo_brac2->mInfo->Pmin.z);
}
//if brackets are okay, we've moved on without changing anything except setting initial LCDS value as L* at inner bracket
nn = 0;
while (Lgm_Magnitude(&Pouter)-Lgm_Magnitude(&Pinner) > tol){
if (LstarInfo->VerbosityLevel > 1) printf("Current LCDS iteration, bracket width = %d, %g\n", nn, Lgm_Magnitude(&Pouter)-Lgm_Magnitude(&Pinner));
if (nn > maxIter) {
printf("********* EXCEEDED MAXITER\n");
//free structures before returning
FreeLstarInfo( LstarInfo_brac1 );
FreeLstarInfo( LstarInfo_brac2 );
FreeLstarInfo( LstarInfo_test );
return(-2); //reached max iterations without achieving tolerance - bail
}
Xtest = (Lgm_Magnitude(&Pinner) + (Lgm_Magnitude(&Pouter)-Lgm_Magnitude(&Pinner))/2.0);
PtestSM.x = -1.0*Xtest*cos(MLT); PtestSM.y = -1.0*Xtest*sin(MLT); PtestSM.z = 0.0;
Lgm_Convert_Coords( &PtestSM, &Ptest, SM_TO_GSM, LstarInfo_test->mInfo->c );
LstarInfo_test->mInfo->Bfield( &Ptest, &Bvec, LstarInfo_test->mInfo );
Blocal = Lgm_Magnitude( &Bvec );
//Trace to minimum-B
TFlag = Lgm_Trace( &Ptest, &v1, &v2, &v3, 120.0, 0.01, TRACE_TOL, LstarInfo_test->mInfo );
if ( TFlag == LGM_CLOSED ) {
//If test point is closed FL then check for undefined L*.
//Get L*
LstarInfo_test->mInfo->Bm = LstarInfo_test->mInfo->Bmin/sa2;
LS_Flag = Lstar( &v3, LstarInfo_test);
if ( (LS_Flag > 0) || (LstarInfo_test->LS != LGM_FILL_VALUE) ){
//Drift shell defined
Pinner = Ptest;
LCDSv3 = v3;
LCDS = LstarInfo_test->LS;
*K = (LstarInfo_test->I0)*sqrt(LstarInfo_test->mInfo->Bm*nTtoG);
//Determine the type of the orbit
LstarInfo_test->DriftOrbitType = LGM_DRIFT_ORBIT_CLOSED;
for ( k=0; k<LstarInfo_test->nMinMax; ++k ) {
if ( LstarInfo_test->nMinima[k] > 1 ) LstarInfo_test->DriftOrbitType = LGM_DRIFT_ORBIT_CLOSED_SHABANSKY;
if ( LstarInfo_test->nMinima[k] < 1 ) {printf("Less than one minimum defined on field line: Exit due to impossibility."); exit(-1); }
}
if (LstarInfo->VerbosityLevel > 1) printf("Current LCDS, K, PtestSM is %g, %g, (%g, %g, %g)\n", LCDS, *K, PtestSM.x, PtestSM.y, PtestSM.z);
LstarInfo->mInfo->Bm = LstarInfo_test->mInfo->Bm;
LstarInfo->DriftOrbitType = LstarInfo_test->DriftOrbitType;
} else {
Pouter = Ptest;
Lgm_Convert_Coords( &Ptest, &PtestSM, GSM_TO_SM, LstarInfo_test->mInfo->c );
printf("Failed DS trace at test point (%g %g %g GSM; %g %g %g SM; TFlag = %d), moving outer bracket to current location\n",
Ptest.x, Ptest.y, Ptest.z, PtestSM.x, PtestSM.y, PtestSM.z, TFlag);
}
} else {
//FL open -> drift shell open
Lgm_Convert_Coords( &Ptest, &PtestSM, GSM_TO_SM, LstarInfo_test->mInfo->c );
printf("Failed FL trace at test point (%g %g %g GSM; %g %g %g SM; TFlag = %d), moving outer bracket to current location\n",
Ptest.x, Ptest.y, Ptest.z, PtestSM.x, PtestSM.y, PtestSM.z, TFlag);
Pouter = Ptest;
}
nn++;
}
if (LstarInfo->VerbosityLevel > 0) printf("Final LCDS, K is %g, %g. Eq. radius = %g \n", LCDS, *K, Lgm_Magnitude( &LCDSv3 ));
LstarInfo->LS = LCDS;
//free structures
FreeLstarInfo( LstarInfo_brac1 );
FreeLstarInfo( LstarInfo_brac2 );
FreeLstarInfo( LstarInfo_test );
return(0);
}
int Lgm_TraceToYZPlane( Lgm_Vector *u, Lgm_Vector *v, double Xtarget, double sgn0, double tol, Lgm_MagModelInfo *Info ) {
Lgm_Vector u_scale;
double Htry, Hdid, Hnext, Hmin, Hmax, s, sgn, fsgn0;
double Sa, Sb, B, f, r2, z2, r3, L, R, hhh;
double Stotal;
Lgm_Vector Btmp;
Lgm_Vector Pa, Pb, P;
int done, reset=TRUE, bracketed=FALSE;
long int Ntotal;
//printf("\n\n\n***************************************\n");
Pb.x = Pb.y = Pb.z = 0.0;
Hmax = 20.0;
Hmin = 0.01;
u_scale.x = 100.0; u_scale.y = 100.0; u_scale.z = 100.0;
/*
* Set the start point, Pa
*/
Pa = *u;
f = Xtarget - Pa.x;
fsgn0 = ( f<0.0) ? -1.0 : 1.0;
Sa = 0.0;
Stotal = 0.0;
Ntotal = 0;
/*
* Choose a good step size to try.
*/
Lgm_Convert_Coords( &Pa, &P, GSM_TO_SM, Info->c );
R = Lgm_Magnitude( &Pa );
r2 = R*R;
z2 = P.z*P.z;
L = 9e99;
if ( fabs( r2 - z2 ) < 1e-2 ) {
/*
* High L
*/
Htry = 2.0;
} else {
r3 = r2*R;
L = r3 / (r2 - z2);
Htry = ( L < 4.5 ) ? 1.165*L : 4.5;
}
if ( Htry < 1e-4 ) Htry = 0.001;
//Htry = 0.01;
/*
* Now, bracket minimum. And do a bisection search for the minimum.
*/
done = FALSE;
sgn = sgn0;
P = Pa;
Sb = -9e99;
//printf("Htry =%g sgn = %g\n", Htry, sgn );
//printf("Xtarget = %g f = %g P = %g %g %g\n", Xtarget, f, P.x, P.y, P.z);
while ( !done ) {
//if ( Lgm_MagStep( &P, &u_scale, Htry, &Hdid, &Hnext, 1.0e-7, sgn, &s, &reset, Info->Bfield, Info ) < 0 ) return(-1);
if ( Lgm_MagStep( &P, &u_scale, Htry, &Hdid, &Hnext, sgn, &s, &reset, Info->Bfield, Info ) < 0 ) return(-1);
Stotal += Hdid;
++Ntotal;
R = Lgm_Magnitude( &P );
r2 = R*R;
r3 = r2*R;
L = r3 / (r2 - z2);
f = Xtarget - P.x;
//printf("Xtarget = %g f = %g P = %g %g %g\n", Xtarget, f, P.x, P.y, P.z);
if ( (P.x > Info->OpenLimit_xMax) || (P.x < Info->OpenLimit_xMin) || (P.y > Info->OpenLimit_yMax) || (P.y < Info->OpenLimit_yMin)
|| (P.z > Info->OpenLimit_zMax) || (P.z < Info->OpenLimit_zMin) || ( s > 1000.0 ) ) {
/*
* Open FL!
*/
//v->x = v->y = v->z = 0.0;
*v = P;
//printf("OPEN!\n\n\n");
return(0);
} else if ( r2 < 1.0 ) {
return( -1 );
} else if ( (Stotal > 300.0) || ( Ntotal > 1500 ) ) {
printf("Lgm_TraceToYZPlane: %s:%d Field line too long or too many iterations: Stotal / Ntotal: %g / %ld\n", __FILE__, __LINE__, Stotal, Ntotal );
return( 0 );
} else if ( fabs( f ) < tol ){
done = TRUE;
} else if ( fsgn0*f > 0.0 ){
Pa = P;
Sa += Hdid;
sgn = sgn0;
if ( bracketed ) {
Htry = fabs( Sb - Sa )/2.0;
} else if ( L < 4.5 ) {
hhh = 1.165*L+1.0 - R + 1.0;
//if ( hhh > 1e-4 ) Htry = hhh;
if ( hhh > R-1.0 ) {
hhh = (R-1.0)/2.0;
}
}
/*
printf("A: Sa, Sb, P = %g %g (%g, %g, %g) Htry = %f\n", Sa, Sb, P.x, P.y, P.z, Htry);
*/
} else {
Pb = P;
if ( bracketed ) Sb += sgn*sgn0*Hdid;
else Sb = Sa + Hdid;
bracketed = TRUE;
sgn = -sgn0;
Htry = fabs( Sb - Sa )/2.0;
/*
printf("B: Sa, Sb, P = %g %g (%g, %g, %g) Htry = %f\n", Sa, Sb, P.x, P.y, P.z, Htry);
*/
}
}
/*
*
*/
*v = Pb;
//printf("B: Sa, Sb, P = %g %g (%g, %g, %g) Htry = %f\n", Sa, Sb, P.x, P.y, P.z, Htry);
// if ( fabs( Xtarget - Pb.x ) > 2.0*tol ) return( -1 );
return( 1 );
}
/*
* Input Variables:
*
* Date:
* UTC:
* u: Input position vector in GSM
* nAlpha: Number of Pitch Angles to compute
* Alpha: Pitch Angles to compute
* Quality: Quality factor (0-8)
*
* Input/OutPut Variables:
*
* MagEphemInfo: Structure used to input and output parameters/settings/results to/from routine.
*
*/
void ComputeLstarVersusPA( long int Date, double UTC, Lgm_Vector *u, int nAlpha, double *Alpha, int Quality, Lgm_MagEphemInfo *MagEphemInfo ) {
Lgm_LstarInfo *LstarInfo, *LstarInfo2, *LstarInfo3;
Lgm_Vector v, v1, v2, v3, vv1, Bvec;
double sa, sa2, Blocal;
double Lam, CosLam, LSimple, dSa, dSb;
int i, LS_Flag, nn, tk, ci;
double Ival, Sbval, r, SS;
int Kp=KP_DEFAULT;
char Filename[128], *PreStr, *PostStr;
FILE *fpout;
LstarInfo = MagEphemInfo->LstarInfo;
// Save Date, UTC to MagEphemInfo structure
MagEphemInfo->Date = Date;
MagEphemInfo->UTC = UTC;
// Save nAlpha, and Alpha array to MagEphemInfo structure
MagEphemInfo->nAlpha = nAlpha;
for (i=0; i<MagEphemInfo->nAlpha; i++) MagEphemInfo->Alpha[i] = Alpha[i];
// Set Tolerances
SetLstarTolerances( MagEphemInfo->LstarQuality, LstarInfo );
sprintf( Filename, "DipoleTest_1.05/results_%.0e.dat", LstarInfo->mInfo->Lgm_FindShellLine_I_Tol );
fpout = fopen(Filename, "w");
// set coord transformation
Lgm_Set_Coord_Transforms( Date, UTC, LstarInfo->mInfo->c );
/*
* Blocal at sat location.
*/
MagEphemInfo->P_gsm = *u;
LstarInfo->mInfo->Bfield( u, &Bvec, LstarInfo->mInfo );
Blocal = Lgm_Magnitude( &Bvec );
MagEphemInfo->B = Blocal;
/*
* Compute Field-related quantities for each Pitch Angle.
*/
if ( Lgm_Trace( u, &v1, &v2, &v3, 120.0, 0.01, TRACE_TOL, LstarInfo->mInfo ) == 1 ) {
MagEphemInfo->Pmin_gsm = v3;
MagEphemInfo->Bmin = LstarInfo->mInfo->Bmin;
/*
* Get a simple measure of how big L is
*/
Lgm_Convert_Coords( &v1, &vv1, GSM_TO_SM, LstarInfo->mInfo->c );
Lam = asin( vv1.z/Lgm_Magnitude( &vv1 ) );
CosLam = cos( Lam );
LSimple = (1.0+120.0/WGS84_A)/( CosLam*CosLam );
{ // ***** BEGIN PARALLEL EXECUTION *****
/*
* Do all of the PAs in parallel. To control how many threads get run
* use the enironment variable OMP_NUM_THREADS. For example,
* setenv OMP_NUM_THREADS 8
* will use 8 threads to do the loop in parallel. Be very careful what gets
* set private here -- the threads must not interfere with each other.
*/
#pragma omp parallel private(LstarInfo2,LstarInfo3,sa,sa2,dSa,dSb,LS_Flag,Ival,Sbval,nn,tk)
#pragma omp for schedule(dynamic, 1)
for ( i=0; i<MagEphemInfo->nAlpha; i++ ){ // LOOP OVER PITCH ANGLES
// make a local copy of LstarInfo structure -- needed for multi-threading
LstarInfo3 = Lgm_CopyLstarInfo( LstarInfo );
// colorize the diagnostic messages.
sprintf( LstarInfo3->PreStr, "\033[38;5;%dm", Colors[i%9]); sprintf( LstarInfo3->PostStr, "\033[0m");
PreStr = LstarInfo3->PreStr; PostStr = LstarInfo3->PostStr;
/*
* Set Pitch Angle, sin, sin^2, and Bmirror
*/
sa = sin( MagEphemInfo->Alpha[i]*RadPerDeg ); sa2 = sa*sa;
printf("%sComputing L* for Pitch Angle: Alpha[%d] = %g Date: %ld UTC: %g Lsimple = %g%s\n", PreStr, i, MagEphemInfo->Alpha[i], Date, UTC, LSimple, PostStr );
LstarInfo3->mInfo->Bm = Blocal/sa2;
NewTimeLstarInfo( Date, UTC, MagEphemInfo->Alpha[i], LstarInfo3->mInfo->Bfield, LstarInfo3 );
MagEphemInfo->Bm[i] = LstarInfo3->mInfo->Bm;
/*
* Compute L*
*/
LstarInfo2 = Lgm_CopyLstarInfo( LstarInfo3 );
if ( LSimple < 10.0 ){
// USER SHOULD DECIDE THRESHOLD HERE
LstarInfo2->mInfo->Bm = LstarInfo3->mInfo->Bm;
if (LstarInfo3->VerbosityLevel >= 2 ) {
printf("\n\n\t%sComputing L* for: UTC = %g PA = %d (%g)%s\n", PreStr, UTC, i, MagEphemInfo->Alpha[i], PostStr );
printf(" \t%s I = %g PA = %d (%g)%s\n", PreStr, MagEphemInfo->I[i], i, MagEphemInfo->Alpha[i], PostStr );
}
LS_Flag = Lstar( &v3, LstarInfo2);
if (LstarInfo3->VerbosityLevel >= 2 ) {
printf("\t%sUTC, L* = %g %g%s\n", PreStr, UTC, LstarInfo2->LS, PostStr );
printf("\t%sUTC, L*_McIlwain = %g %g%s\n", PreStr, UTC, LstarInfo2->LS_McIlwain_M, PostStr );
printf("\t%sUTC, LSimple = %g %g%s\n\n\n", PreStr, UTC, LSimple, PostStr );
}
MagEphemInfo->Lstar[i] = LstarInfo2->LS;
/*
* Save results to the MagEphemInfo structure.
*/
MagEphemInfo->nShellPoints[i] = LstarInfo2->nPnts;
for (nn=0; nn<LstarInfo2->nPnts; nn++ ){
MagEphemInfo->ShellI[i][nn] = LstarInfo2->I[nn];
MagEphemInfo->ShellFootprint_Pn[i][nn] = LstarInfo2->Footprint_Pn[nn];
MagEphemInfo->ShellFootprint_Ps[i][nn] = LstarInfo2->Footprint_Ps[nn];
MagEphemInfo->ShellMirror_Pn[i][nn] = LstarInfo2->Mirror_Pn[nn];
MagEphemInfo->ShellMirror_Ps[i][nn] = LstarInfo2->Mirror_Ps[nn];
MagEphemInfo->ShellMirror_Ss[i][nn] = LstarInfo2->mInfo->Sm_South;
MagEphemInfo->ShellMirror_Sn[i][nn] = LstarInfo2->mInfo->Sm_North;
/*
* Save all of the drift shell FLs in MagEphemInfo structure
*/
MagEphemInfo->nFieldPnts[i][nn] = LstarInfo2->nFieldPnts[nn];
for (tk=0; tk<LstarInfo2->nFieldPnts[nn]; tk++){ // loop over points in a FL
MagEphemInfo->s_gsm[i][nn][tk] = LstarInfo2->s_gsm[nn][tk];
MagEphemInfo->Bmag[i][nn][tk] = LstarInfo2->Bmag[nn][tk];
MagEphemInfo->x_gsm[i][nn][tk] = LstarInfo2->x_gsm[nn][tk];
MagEphemInfo->y_gsm[i][nn][tk] = LstarInfo2->y_gsm[nn][tk];
MagEphemInfo->z_gsm[i][nn][tk] = LstarInfo2->z_gsm[nn][tk];
}
}
} else {
printf(" Lsimple >= 10.0 ( Not doing L* calculation )\n" );
}
fprintf(fpout, "%.15lf %.15lf\n", MagEphemInfo->Alpha[i], (1.05-LstarInfo2->LS)/LstarInfo->mInfo->Lgm_FindShellLine_I_Tol );
fflush(fpout);
FreeLstarInfo( LstarInfo2 );
FreeLstarInfo( LstarInfo3 );
}
}
// ***** END PARALLEL EXECUTION *****
}
// FreeLstarInfo( LstarInfo );
fclose(fpout);
return;
}
int main(){
long int Date;
double UTC;
Lgm_Vector u, B, CurlB;
Lgm_MagModelInfo *mInfo;
int i, j;
Date = 20050831;
UTC = 9.0;
mInfo = Lgm_InitMagInfo( );
Lgm_Set_Coord_Transforms( Date, UTC, mInfo->c );
mInfo->Bfield = Lgm_B_TS04;
//mInfo->Bfield = Lgm_B_OP77;
//mInfo->Bfield = Lgm_B_T89;
mInfo->Bfield = Lgm_B_TS04;
mInfo->Bfield = Lgm_B_igrf;
mInfo->Bfield = Lgm_B_cdip;
mInfo->Bfield = Lgm_B_edip;
mInfo->Bfield = Lgm_B_T89;
mInfo->P = 4.1011111111111118;
mInfo->Dst = 7.7777777777777777;
mInfo->By = 3.7244444444444444;
mInfo->Bz = -0.12666666666666665;
mInfo->W[0] = 0.12244444444444445;
mInfo->W[1] = 0.2514;
mInfo->W[2] = 0.089266666666666661;
mInfo->W[3] = 0.047866666666666668;
mInfo->W[4] = 0.22586666666666666;
mInfo->W[5] = 1.0461333333333334;
printf("%13s", "Kp");
printf(" %13s", "Ux (Re)");
printf(" %13s", "Uy (Re)");
printf(" %13s", "Uz (Re)");
printf(" %13s", "Bx (nT)");
printf(" %13s", "By (nT)");
printf(" %13s", "Bz (nT)");
printf(" %13s", "Bmag (nT)");
printf(" %16s", "CurlB_x (nT/Re)");
printf(" %16s", "CurlB_y (nT/Re)");
printf(" %16s", "CurlB_z (nT/Re)\n");
for (i=0; i<=5; i++) {
mInfo->Kp = i;
u.x = -6.6; u.y = 0.0; u.z = 0.0;
mInfo->Bfield( &u, &B, mInfo );
Lgm_CurlB( &u, &CurlB, LGM_DERIV_SIX_POINT, 1e-3, mInfo );
printf( "%13i", mInfo->Kp);
printf( " %13g %13g %13g", u.x, u.y, u.z );
printf( " %13g %13g %13g", B.x, B.y, B.z );
printf( " %13g", Lgm_Magnitude( &B ) );
printf( " %16g %16g %16g \n", CurlB.x, CurlB.y, CurlB.z );
}
for (j=0; j<100; j++){
mInfo->Kp = 3;
for (i=0; i<13; i++) {
u.x = -1. - (double)i * 0.5;
u.y = 1.0; u.z = -1.0;
mInfo->Bfield( &u, &B, mInfo );
Lgm_CurlB( &u, &CurlB, LGM_DERIV_SIX_POINT, 1e-3, mInfo );
printf( "%13i", mInfo->Kp);
printf( " %13g %13g %13g", u.x, u.y, u.z );
printf( " %13g %13g %13g", B.x, B.y, B.z );
printf( " %13g", Lgm_Magnitude( &B ) );
printf( " %16g %16g %16g \n", CurlB.x, CurlB.y, CurlB.z );
}
}
{
Lgm_Vector v;
mInfo->Lgm_VelStep_T = 100e-3; // 100keV
mInfo->Lgm_VelStep_q = -LGM_e; // electron change
mInfo->Lgm_VelStep_E0 = LGM_Ee0; // electron mass
mInfo->Lgm_VelStep_Bm = sqrt(B.x*B.x + B.y*B.y + B.z*B.z); // b mirror [nT]
mInfo->Lgm_VelStep_h = 1e-3; // step size in Re
mInfo->Lgm_VelStep_DerivScheme = LGM_DERIV_FOUR_POINT;
printf("\nT=%lf q=%lf E0=%lf Bm=%lf h=%lf DerivScheme=%d\n",
mInfo->Lgm_VelStep_T,
mInfo->Lgm_VelStep_q, mInfo->Lgm_VelStep_E0, mInfo->Lgm_VelStep_Bm, mInfo->Lgm_VelStep_h,
mInfo->Lgm_VelStep_DerivScheme );
Lgm_GradAndCurvDriftVel(&u, &v, mInfo);
printf("\nThe drift velocity [km/s in GSM] for a locally mirroring 100 keV electron is:\n");
Lgm_PrintVector(&v);
}
Lgm_FreeMagInfo( mInfo );
exit(0);
}