void WinEDA_GerberFrame::Process_Special_Functions(wxCommandEvent& event)
/********************************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
int layer = GetScreen()->m_Active_Layer;
GERBER_Descr * gerber_layer = g_GERBER_Descr_List[layer];
wxPoint pos;
wxClientDC dc(DrawPanel);
DrawPanel->PrepareGraphicContext(&dc);
wxGetMousePosition(&pos.x, &pos.y);
pos.y += 20;
switch ( id ) // Arret eventuel de la commande de déplacement en cours
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_INVERT_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
/* ne devrait pas etre execute, sauf bug */
if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
{
m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
}
if (m_ID_current_state == 0 )
SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
break;
default: // Arret dea commande de déplacement en cours
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
break;
}
switch ( id ) // Traitement des commandes
{
case ID_EXIT :
Close(TRUE);
break;
case ID_NEW_PROJECT:
case ID_LOAD_PROJECT:
Files_io(event);
break;
case ID_PCB_GLOBAL_DELETE:
Erase_Current_Layer(&dc, TRUE);
break;
case wxID_CUT:
break;
case wxID_COPY:
break;
case wxID_PASTE:
// HandleBlockBegin(&dc, BLOCK_PASTE);
break;
case ID_UNDO_BUTT:
UnDeleteItem(&dc);
break;
case ID_GET_TOOLS:
// InstallToolsFrame(this, wxPoint(-1,-1) );
break;
case ID_FIND_ITEMS:
// InstallFindFrame(this, pos);
break;
case ID_BUS_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Tracks"));
break;
case ID_LINE_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Drawing"));
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Text"));
break;
case ID_NO_SELECT_BUTT:
SetToolID( 0, 0, wxEmptyString);
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_END_LINE:
DrawPanel->MouseToCursorSchema();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
DrawPanel->MouseToCursorSchema();
if ( GetScreen()->m_CurrentItem == NULL) break;
Delete_Segment(&dc, (TRACK*)GetScreen()->m_CurrentItem);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_PCB_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Delete item"));
break;
case ID_POPUP_SCH_MOVE_ITEM_REQUEST:
DrawPanel->MouseToCursorSchema();
Process_Move_Item(this, GetScreen()->m_CurrentItem, &dc);
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
{
GetScreen()->m_Active_Layer = m_SelLayerBox->GetSelection();
DrawPanel->Refresh(TRUE);
break;
}
case ID_TOOLBARH_GERBER_SELECT_TOOL:
if ( gerber_layer )
{
int tool = m_SelLayerTool->GetSelection();
if ( tool > 0 ) tool = tool - 1 + FIRST_DCODE;
else tool = 0;
gerber_layer->m_Selected_Tool = tool;
DrawPanel->Refresh(TRUE);
}
else DisplayError(this, _("No layer selected") );
break;
case ID_GERBVIEW_SHOW_LIST_DCODES:
Liste_D_Codes(&dc);
break;
case ID_GERBVIEW_SHOW_SOURCE:
if ( gerber_layer )
{
wxString editorname = GetEditorName();
if ( ! editorname.IsEmpty() )
ExecuteFile(this, editorname, gerber_layer->m_FileName);
}
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockEnd(&dc);
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
default:
wxMessageBox( wxT("WinEDA_GerberFrame::Process_Special_Functions error"));
break;
}
SetToolbars();
}
/* Handles the selection of tools, menu, and popup menu commands.
*/
void GERBVIEW_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
m_canvas->EndMouseCapture();
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
/* Should not be executed, except bug */
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
m_canvas->SetCursor( (wxStockCursor) m_canvas->GetCurrentCursor() );
break;
default:
m_canvas->EndMouseCapture();
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( id )
{
case ID_GERBVIEW_SET_PAGE_BORDER:
{
DIALOG_PAGE_SHOW_PAGE_BORDERS dlg( this );
if( dlg.ShowModal() == wxID_OK )
m_canvas->Refresh();
}
break;
case ID_GERBVIEW_GLOBAL_DELETE:
Erase_Current_DrawLayer( true );
ClearMsgPanel();
break;
case ID_NO_TOOL_SELECTED:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_GERBVIEW_SHOW_LIST_DCODES:
Liste_D_Codes();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
wxFAIL_MSG( wxT( "GERBVIEW_FRAME::Process_Special_Functions error" ) );
break;
}
}
