int main(void)
{
u8 key;
u8 i=0;
SystemInit();
delay_init(72); //延时初始化
NVIC_Configuration();
uart_init(9600);
LED_Init();
KEY_Init();
LCD_Init();
POINT_COLOR=RED;//设置字体为蓝色
LCD_ShowString(60,50,"Mini STM32");
LCD_ShowString(60,70,"TOUCH TEST");
LCD_ShowString(60,90,"ATOM@ALIENTEK");
LCD_ShowString(60,110,"2011/1/1");
LCD_ShowString(60,130,"Press KEY0 to Adjust");
Touch_Init();
delay_ms(1500);
Load_Drow_Dialog();
while(1)
{
key=KEY_Scan();
if(Pen_Point.Key_Sta==Key_Down)//触摸屏被按下
{
Pen_Int_Set(0);//关闭中断
do
{
Convert_Pos();
Pen_Point.Key_Sta=Key_Up;
if(Pen_Point.X0>216&&Pen_Point.Y0<16)Load_Drow_Dialog();//清除
else
{
Draw_Big_Point(Pen_Point.X0,Pen_Point.Y0);//画图
GPIOC->ODR|=1<<1; //PC1 上拉
}
}while(PEN==0);//如果PEN一直有效,则一直执行
Pen_Int_Set(1);//开启中断
}else delay_ms(10);
if(key==1)//KEY0按下,则执行校准程序
{
LCD_Clear(WHITE);//清屏
Touch_Adjust(); //屏幕校准
Save_Adjdata();
Load_Drow_Dialog();
}
i++;
if(i==20)
{
i=0;
LED0=!LED0;
}
};
}
//进入触摸屏校准函数
void Load_Adjust_Panel()
{
LCD_Clear(WHITE);//清屏
Touch_Adjust(); //屏幕校准
Save_Adjdata();
Load_Drow_Dialog();
}
//任务5
//触摸画笔
void TaskTouch(void *pdata)
{ LCD_ShowString(10,160,"Touch Panel");
while(1)
{ GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource1); //触摸中断线映射
if(Pen_Point.Key_Sta==Key_Down)//触摸屏被按下
{
Pen_Int_Set(0);//关闭中断
Convert_Pos();
Pen_Point.Key_Sta=Key_Up;
if(Pen_Point.X0>216&&Pen_Point.Y0>304)Load_Drow_Dialog();//清除
else if(Pen_Point.Y0>180)
{
Draw_Big_Point(Pen_Point.X0,Pen_Point.Y0);//画图
GPIO_SetBits(GPIOC,GPIO_Pin_1);
}
Pen_Int_Set(1);//开启中断
}
OSTimeDlyHMSM(0,0,0,2);
};
}
/*
*********************************************************************************************************
* Description: Main function
* Arguments : None
* Returns : None
*********************************************************************************************************
*/
int main (void)
{
u8 key;
u8 x0,y0,x1,y1,x2,y2;
u8 r,a,b;
unsigned char flag;
tccolor=Blue;
SystemInit();
UART0_Init();
LCD_Init ();
LPC_GPIO0->FIODIR |= 0x00002C0; //P0.6 0.7 0.9 Output
LPC_GPIO2->FIODIR |= 0x00000FF; //P2.13 input P2.0...P2.7 Output
Touch_Init();
LCD_Color(0,0,239,239,White);
Load_Drow_Dialog();
LCD_Color(279,0,40,40,White);
while(1)
{
if(len==8)
{
len=0;
flag=data[6];
switch(flag)
{
case 0x01:
x0=data[0];y0=data[1];x1=data[2];y1=data[3];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawLine(x0,y0,x1,y1);
break;
case 0x02:
x0=data[0];y0=data[1];x1=data[2];y1=data[3];x2=data[4];y2=data[5];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawTriangle(x0,y0,x1,y1,x2,y2);
break;
case 0x03:
x0=data[0];y0=data[1];x1=data[2];y1=data[3];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawRectangle(x0,y0,x1,y1);
break;
case 0x04:
x0=data[0];y0=data[1];r=data[2];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawCircle(x0,y0,r);
break;
case 0x05:
x0=data[0];y0=data[1];a=data[2];b=data[3];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawEllipse(x0,y0,a,b);
}
}
key = KEY_Scan();
if(Pen_Point.Key_Sta==Key_Down) //Touch screen is pressed
{
Pen_Int_Set(0); //Closed interrupt
do
{
Convert_Pos();
Pen_Point.Key_Sta=Key_Up;
// Draw_Big_Point(Pen_Point.X0,Pen_Point.Y0); //Drawing
if(Pen_Point.Y0>=240)
{
Load_Drow_Dialog();
switch(Pen_Point.X0/40)
{
case 0:LCD_Color(279,0,40,40,White);tccolor=Blue;break;
case 1:LCD_Color(279,40,40,40,White);tccolor=Yellow;break;
case 2:LCD_Color(279,80,40,40,White);tccolor=Green;break;
case 3:LCD_Color(279,120,40,40,White);tccolor=Red;break;
case 4:LCD_Color(279,160,40,40,White);tccolor=Purple;break;
case 5:LCD_Color(279,200,40,40,White);tccolor=Cyan;break;
}
}
/* else
{
LCD_Color(0,0,239,239,tccolor);
}*/
}while(PEN==0); //While the Touch screen is pressing
Pen_Int_Set(1); //Opene the interrupt
}
else
delay1ms(1);
}
}
