//****************************************************************************
//
//! Initialize the watchdog timer
//!
//! \param fpAppWDTCB is the WDT interrupt handler to be registered
//! \param uiReloadVal is the reload value to be set to the WDT
//!
//! This function
//! 1. Initializes the WDT
//!
//! \return None.
//
//****************************************************************************
void WDT_IF_Init(fAPPWDTDevCallbk fpAppWDTCB,
unsigned int uiReloadVal)
{
//
// Enable the peripherals used by this example.
//
MAP_PRCMPeripheralClkEnable(PRCM_WDT, PRCM_RUN_MODE_CLK);
//
// Unlock to be able to configure the registers
//
MAP_WatchdogUnlock(WDT_BASE);
if(fpAppWDTCB != NULL)
{
#ifdef USE_TIRTOS
osi_InterruptRegister(INT_WDT, fpAppWDTCB, INT_PRIORITY_LVL_1);
#else
MAP_WatchdogIntRegister(WDT_BASE,fpAppWDTCB);
#endif
}
//
// Set the watchdog timer reload value
//
MAP_WatchdogReloadSet(WDT_BASE,uiReloadVal);
//
// Start the timer. Once the timer is started, it cannot be disable.
//
MAP_WatchdogEnable(WDT_BASE);
}
/*---------------------------------------------------------------------------*/
void
watchdog_start(void)
{
#if WATCHDOG_ENABLED == 1
/* Start the watchdog */
MAP_WatchdogEnable(WATCHDOG0_BASE);
/* Prevent unwanted watchdog register changes */
MAP_WatchdogLock(WATCHDOG0_BASE);
#endif
}
void hw_watchdog_init()
{
// Startup watchdog timer
MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_WDOG0);
MAP_WatchdogReloadSet(WATCHDOG0_BASE, MAP_SysCtlClockGet() * 8); // 8s
MAP_WatchdogResetEnable(WATCHDOG0_BASE);
#ifdef DEBUG
MAP_WatchdogStallEnable(WATCHDOG0_BASE);
#endif // DEBUG
MAP_IntEnable(INT_WATCHDOG);
MAP_WatchdogEnable(WATCHDOG0_BASE); // can not be disabled
hw_watchdog_clear();
}
//*****************************************************************************
//
//! main function demonstrates the use of the watchdog timer to perform system
//! reset.
//!
//! \param None
//!
//! \return None
//
//*****************************************************************************
void main(void)
{
tBoolean bRetcode;
//
// Initialize the board
//
BoardInit();
//
// Pinmuxing for LEDs
//
PinMuxConfig();
//
// configure RED LED
//
GPIO_IF_LedConfigure(LED1);
GPIO_IF_LedOff(MCU_RED_LED_GPIO);
//
// Enable the peripherals used by this example.
//
MAP_PRCMPeripheralClkEnable(PRCM_WDT, PRCM_RUN_MODE_CLK);
//
// Set up the watchdog interrupt handler.
//
WDT_IF_Init(WatchdogIntHandler, MILLISECONDS_TO_TICKS(WD_PERIOD_MS));
//
// Start the timer. Once the timer is started, it cannot be disable.
//
MAP_WatchdogEnable(WDT_BASE);
bRetcode = MAP_WatchdogRunning(WDT_BASE);
if(!bRetcode)
{
WDT_IF_DeInit();
}
//
// Loop forever while the LED winks as watchdog interrupts are handled.
//
while(FOREVER)
{
}
}
STATIC mp_obj_t pyb_wdt_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *all_args) {
// check the arguments
mp_map_t kw_args;
mp_map_init_fixed_table(&kw_args, n_kw, all_args + n_args);
mp_arg_val_t args[MP_ARRAY_SIZE(pyb_wdt_init_args)];
mp_arg_parse_all(n_args, all_args, &kw_args, MP_ARRAY_SIZE(args), pyb_wdt_init_args, args);
if (args[0].u_obj != mp_const_none && mp_obj_get_int(args[0].u_obj) > 0) {
mp_raise_msg(&mp_type_OSError, mpexception_os_resource_not_avaliable);
}
uint timeout_ms = args[1].u_int;
if (timeout_ms < PYBWDT_MIN_TIMEOUT_MS) {
mp_raise_ValueError(mpexception_value_invalid_arguments);
}
if (pyb_wdt_obj.running) {
mp_raise_msg(&mp_type_OSError, mpexception_os_request_not_possible);
}
// Enable the WDT peripheral clock
MAP_PRCMPeripheralClkEnable(PRCM_WDT, PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
// Unlock to be able to configure the registers
MAP_WatchdogUnlock(WDT_BASE);
#ifdef DEBUG
// make the WDT stall when the debugger stops on a breakpoint
MAP_WatchdogStallEnable (WDT_BASE);
#endif
// set the watchdog timer reload value
// the WDT trigger a system reset after the second timeout
// so, divide by 2 the timeout value received
MAP_WatchdogReloadSet(WDT_BASE, PYBWDT_MILLISECONDS_TO_TICKS(timeout_ms / 2));
// start the timer. Once it's started, it cannot be disabled.
MAP_WatchdogEnable(WDT_BASE);
pyb_wdt_obj.base.type = &pyb_wdt_type;
pyb_wdt_obj.running = true;
return (mp_obj_t)&pyb_wdt_obj;
}
Thread::Error Watchdog::start() {
MAP_PRCMPeripheralClkEnable(PRCM_WDT, PRCM_RUN_MODE_CLK);
MAP_WatchdogUnlock(WDT_BASE);
MAP_WatchdogStallEnable(WDT_BASE);
MAP_IntPrioritySet(INT_WDT, INT_PRIORITY_LVL_1);
MAP_WatchdogIntRegister(WDT_BASE, isr);
MAP_WatchdogReloadSet(WDT_BASE, 240000000UL);
MAP_WatchdogEnable(WDT_BASE);
Thread::Error err = Thread::start();
if (err != Thread::kOK)
stop();
return err;
}
/******************************************************************************
* name:
* description:
* param description:
* return value description:
******************************************************************************/
ERROR_CODE ineedmd_watchdog_setup(void)
{
#ifdef USING_TIRTOS
ERROR_CODE eEC = ER_FAIL;
Watchdog_Params_init(¶ms);
params.resetMode = Watchdog_RESET_OFF;
#ifdef DEBUG
//For debugging Watchdog counter will stop while stepping through code and reset is disabled
//
ineedmd_watchdog_debug_mode();
#endif
params.callbackFxn = vINMD_watchdog_callback;
handle = Watchdog_open(Board_WATCHDOG0, ¶ms);
if (!handle)
{
System_printf("Watchdog did not open");
eEC = ER_FAIL;
}
else
{
Watchdog_setReload(handle, WD_BIG_PAT);
eEC = ER_OK;
}
return eEC;
#else
ERROR_CODE eEC = ER_OK;
uint32_t uiWD_shake = 0;
MAP_SysCtlPeripheralEnable(WD_PHERF);
MAP_SysCtlPeripheralReset(WD_PHERF);
eMaster_int_enable();
//Unlock the watchdog
//
if(MAP_WatchdogLockState(WD_BASE) == true)
{
MAP_WatchdogUnlock(WD_BASE);
}
//Enable the Watchdog timer interrupt
//
MAP_WatchdogIntEnable(WD_BASE);
MAP_IntEnable(INT_WATCHDOG);
MAP_WatchdogIntClear(WD_BASE);
//Set the watchdog default timeout
//
MAP_WatchdogReloadSet(WD_BASE, WD_PAT);
//Enable the watchdog to reset the system
//
MAP_WatchdogResetEnable(WD_BASE);
#ifdef DEBUG
//For debugging Watchdog counter will stop while stepping through code and reset is disabled
//
ineedmd_watchdog_debug_mode();
// MAP_WatchdogResetDisable(WD_BASE);
#endif
//Finally enable the watchdog
//
MAP_WatchdogEnable(WD_BASE);
//Check to make sure the watchdog is running
//
uiWD_shake = MAP_WatchdogValueGet(WD_BASE);
if(uiWD_shake < WD_PAT)
{
eEC = ER_OK;
}
else
{
eEC = ER_FAIL;
}
return eEC;
#endif //#ifdef USING_TIRTOS
}
