unsigned int wmq_connectandopen()
{
MQLONG CompCode;
MQLONG Reason;
MQCONN(mgr_name, &Hconn, &CompCode, &Reason);
if ((CompCode != MQCC_OK) | (Reason != MQRC_NONE)) {
// errh_Fatal("MQCONN failed, queue mgr: %s, Code: %d, Reason: %d", mgr_name, CompCode, Reason);
// errh_SetStatus(PWR__SRVTERM);
if (!((CompCode == MQCC_WARNING) && (Reason == MQRC_ALREADY_CONNECTED)))
return 0;
}
/* Open queue for receiving messages */
MQOPEN(Hconn, &RcvObjDesc, RcvOpenOptions, &RcvHobj, &CompCode, &Reason);
if ((CompCode != MQCC_OK) | (Reason != MQRC_NONE)) {
errh_Fatal("MQOPEN failed, queue: %s, Code: %d, Reason: %d", rcv_que_name, CompCode, Reason);
errh_SetStatus(PWR__SRVTERM);
exit(0);
}
/* Open queue for sending messages */
MQOPEN(Hconn, &SndObjDesc, SndOpenOptions, &SndHobj, &CompCode, &Reason);
if ((CompCode != MQCC_OK) | (Reason != MQRC_NONE)) {
errh_Fatal("MQOPEN failed, queue: %s, Code: %d, Reason: %d", snd_que_name, CompCode, Reason);
errh_SetStatus(PWR__SRVTERM);
exit(0);
}
connected = 1;
return 1;
}
int main(int argc, char **argv)
{
/** 初始化全局共享内存前，先获取ups根路径 **/
if(setupshome()==-1)
{
printf("设置全局变量upshome错误,请检查UPSHOME环境变量是否设置\n");
return -1;
}
char startcmd[200];
int i=0;
memset(startcmd,0x00,sizeof(startcmd));
/* Declare file and character for sample input */
/* Declare MQI structures needed */
MQOD od = {MQOD_DEFAULT}; /* Object Descriptor */
MQMD md = {MQMD_DEFAULT}; /* Message Descriptor */
MQPMO pmo = {MQPMO_DEFAULT}; /* put message options */
/** note, sample uses defaults where it can **/
MQHCONN Hcon; /* connection handle */
MQHOBJ Hobj; /* object handle */
MQLONG O_options; /* MQOPEN options */
MQLONG C_options; /* MQCLOSE options */
MQLONG CompCode; /* completion code */
MQLONG OpenCode; /* MQOPEN completion code */
MQLONG Reason; /* reason code */
MQLONG CReason; /* reason code for MQCONN */
MQLONG messlen; /* message length */
int iret = 0;
//pid_t pid;
memset(chnlname,0,sizeof(chnlname));
strcpy(chnlname,"MQ发送渠道");
if(getchnlcfg(chnlname)!=0)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d] 获取渠道[%s]配置失败\n",__FILE__,__LINE__,chnlname);
return -1;
}
SysLog(LOG_CHNL_SHOW,"FILE[%s] LINE[%d] 远程队列管理器[%s]\n",__FILE__,__LINE__,QMName);
SysLog(LOG_CHNL_SHOW,"FILE[%s] LINE[%d] 远程队列[%s]\n",__FILE__,__LINE__,RQName);
mbuf = (_msgbuf *)malloc(sizeof(_msgbuf));
if(mbuf == (void *)-1)
{
SysLog(LOG_CHNL_ERR,"FILE [%s] LINE [%d]:MALLOC MSGBUF ERROR[%s]\n",__FILE__,__LINE__,strerror(errno));
return -1;
}
tranbuf = (_tran *)malloc(sizeof(_tran));
if(tranbuf == (void *)-1)
{
SysLog(LOG_CHNL_ERR,"FILE [%s] LINE [%d]:MALLOC TRANBUF ERROR[%s]\n",__FILE__,__LINE__,strerror(errno));
free(mbuf);
return -1;
}
if(getmsgid(chnlname,&msgidi,&msgido,&msgidr)==-1)
{
SysLog(LOG_CHNL_ERR,"FILE [%s] LINE [%d]:GET CHANNEL[%s] MSGID ERROR[%s]\n",__FILE__,__LINE__,chnlname,strerror(errno));
return -1;
}
/** 设置忽略SIGPIPE信号，防止因socket写的时候客户端关闭导致的SIGPIPE信号 **/
signal(SIGPIPE,SIG_IGN);
signal(35,child_exit);
signal(SIGCHLD,child_exit);
//signal(SIGCHLD,child_exit);
/******************************************************************/
/* */
/* Connect to queue manager */
/* */
/******************************************************************/
//QMName[0] = 0; /* default */
//strncpy(QMName, "dev01", (size_t)MQ_Q_MGR_NAME_LENGTH);
MQCONN(QMName, /* queue manager */
&Hcon, /* connection handle */
&CompCode, /* completion code */
&CReason); /* reason code */
/* report reason and stop if it failed */
if (CompCode == MQCC_FAILED)
{
SysLog(LOG_CHNL_ERR,"FILE [%s] LINE[%d] MQCONN MQ链接失败，错误码%d\n",__FILE__,__LINE__,CReason);
exit( (int)CReason );
}
/******************************************************************/
/* */
/* Use parameter as the name of the target queue */
/* */
/******************************************************************/
//strncpy(od.ObjectName, "RTEST", (size_t)MQ_Q_NAME_LENGTH);
strncpy(od.ObjectName, RQName, (size_t)MQ_Q_NAME_LENGTH);
SysLog(LOG_CHNL_SHOW,"FILE[%s] LINE[%d] target queue is %s\n",__FILE__,__LINE__, od.ObjectName);
//strncpy(od.ObjectQMgrName, argv[5], (size_t) MQ_Q_MGR_NAME_LENGTH);
//SysLog(LOG_CHNL_ERR,"target queue manager is %s\n", od.ObjectQMgrName);
//strncpy(od.DynamicQName, argv[6], (size_t) MQ_Q_NAME_LENGTH);
//SysLog(LOG_CHNL_ERR,"dynamic queue name is %s\n", od.DynamicQName);
/******************************************************************/
/* */
/* Open the target message queue for output */
/* */
/******************************************************************/
if (argc > 3)
{
O_options = atoi( argv[3] );
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]open options are %d\n",__FILE__,__LINE__, O_options);
}
else
{
O_options = MQOO_OUTPUT /* open queue for output */
| MQOO_FAIL_IF_QUIESCING /* but not if MQM stopping */
; /* = 0x2010 = 8208 decimal */
}
MQOPEN(Hcon, /* connection handle */
&od, /* object descriptor for queue */
O_options, /* open options */
&Hobj, /* object handle */
&OpenCode, /* MQOPEN completion code */
&Reason); /* reason code */
/* report reason, if any; stop if failed */
if (Reason != MQRC_NONE)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]MQOPEN ended with reason code %d\n",__FILE__,__LINE__, Reason);
}
if (OpenCode == MQCC_FAILED)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]unable to open queue for output\n",__FILE__,__LINE__);
}
/******************************************************************/
/* */
/* Read lines from the file and put them to the message queue */
/* Loop until null line or end of file, or there is a failure */
/* */
/******************************************************************/
CompCode = OpenCode; /* use MQOPEN result for initial test */
memcpy(md.Format, /* character string format */
MQFMT_STRING, (size_t)MQ_FORMAT_LENGTH);
pmo.Options = MQPMO_NO_SYNCPOINT
| MQPMO_FAIL_IF_QUIESCING;
/******************************************************************/
/* Use these options when connecting to Queue Managers that also */
/* support them, see the Application Programming Reference for */
/* details. */
/* The MQPMO_NEW_MSG_ID option causes the MsgId to be replaced, */
/* so that there is no need to reset it before each MQPUT. */
/* The MQPMO_NEW_CORREL_ID option causes the CorrelId to be */
/* replaced. */
/******************************************************************/
/* pmo.Options |= MQPMO_NEW_MSG_ID; */
/* pmo.Options |= MQPMO_NEW_CORREL_ID; */
signal(SIGUSR1,SIG_IGN);
/** 添加该进程到进程控制表中，方便做统一处理 **/
for(i=0;i<argc;i++)
{
if(strlen(argv[i])==0)
break;
strcat(startcmd," ");
strcat(startcmd,argv[i]);
}
strcat(startcmd," ");
strcat(startcmd,"&");
if(insert_chnlreg(startcmd,chnlname)!=0)
{
SysLog(LOG_CHNL_ERR,"FILE [%s] LINE [%d]:添加渠道[%s]到监控内存失败\n",__FILE__,__LINE__,chnlname);
return -1;
}
/** 从消息队列读取数据，进行后续处理 **/
while(1)
{
SysLog(LOG_CHNL_DEBUG,"FILE [%s] LINE [%d]:渠道[%s]开始服务\n",__FILE__,__LINE__,chnlname);
memset(mbuf,0,sizeof(mbuf));
if(msgrcv(msgidi,mbuf,sizeof(mbuf->tranbuf),0,0)==-1)
{
if(errno == EINTR)
{
continue;
}else
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d] 获取渠道[%s]消息队列消息失败[%s]\n",__FILE__,__LINE__,chnlname,strerror(errno));
sleep (5);
continue;
}
}
SysLog(LOG_CHNL_SHOW,"FILE[%s] LINE[%d] 渠道[%s]获取到跟踪号[%ld]\n",__FILE__,__LINE__,chnlname,mbuf->innerid);
if(sendprocess(mbuf->innerid,&messlen)!=0)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d] 处理失败\n",__FILE__,__LINE__);
/** 返回交易信息到服务端**/
iret = shm_hash_update(mbuf->innerid,"EEEEEEE|发送失败",NULL);
if(iret == -1)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d] 放置打包信息到共享内存失败 \n",__FILE__,__LINE__);
msgsnd(msgidr,mbuf,sizeof(mbuf->tranbuf),IPC_NOWAIT);
}else
{
msgsnd(msgidr,mbuf,sizeof(mbuf->tranbuf),IPC_NOWAIT);
}
}else
{
/****************************************************************/
/* */
/* Put each buffer to the message queue */
/* */
/****************************************************************/
SysLog(LOG_CHNL_SHOW,"FILE[%s] LINE[%d]buffer is [%s] len is [%d]\n",__FILE__,__LINE__,buffer,messlen);
if (messlen > 0)
{
/**************************************************************/
/* The following statement is not required if the */
/* MQPMO_NEW_MSG_ID option is used. */
/**************************************************************/
memcpy(md.MsgId, /* reset MsgId to get a new one */
MQMI_NONE, sizeof(md.MsgId) );
MQPUT(Hcon, /* connection handle */
Hobj, /* object handle */
&md, /* message descriptor */
&pmo, /* default options (datagram) */
messlen, /* message length */
buffer, /* message buffer */
&CompCode, /* completion code */
&Reason); /* reason code */
/* report reason, if any */
if (Reason != MQRC_NONE)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]MQPUT ended with reason code %d\n",__FILE__,__LINE__, Reason);
/** 返回交易信息到服务端**/
iret = shm_hash_update(mbuf->innerid,"EEEEEEE|发送失败",NULL);
if(iret == -1)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]放置打包信息到共享内存失败 \n",__FILE__,__LINE__);
msgsnd(msgidr,mbuf,sizeof(mbuf->tranbuf),IPC_NOWAIT);
}else
{
msgsnd(msgido,mbuf,sizeof(mbuf->tranbuf),IPC_NOWAIT);
}
}
/** 返回交易信息到服务端**/
iret = shm_hash_update(mbuf->innerid,"AAAAAAA|发送成功",NULL);
if(iret == -1)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]放置打包信息到共享内存失败 \n",__FILE__,__LINE__);
msgsnd(msgidr,mbuf,sizeof(mbuf->tranbuf),IPC_NOWAIT);
}else
{
msgsnd(msgidr,mbuf,sizeof(mbuf->tranbuf),IPC_NOWAIT);
}
}
else /* satisfy end condition when empty line is read */
CompCode = MQCC_FAILED;
}
}
/******************************************************************/
/* */
/* Close the target queue (if it was opened) */
/* */
/******************************************************************/
if (OpenCode != MQCC_FAILED)
{
if (argc > 4)
{
C_options = atoi( argv[4] );
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]close options are %d\n",__FILE__,__LINE__, C_options);
}
else
{
C_options = MQCO_NONE; /* no close options */
}
MQCLOSE(Hcon, /* connection handle */
&Hobj, /* object handle */
C_options,
&CompCode, /* completion code */
&Reason); /* reason code */
/* report reason, if any */
if (Reason != MQRC_NONE)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]MQCLOSE ended with reason code %d\n",__FILE__,__LINE__,Reason);
}
}
/******************************************************************/
/* */
/* Disconnect from MQM if not already connected */
/* */
/******************************************************************/
if (CReason != MQRC_ALREADY_CONNECTED)
{
MQDISC(&Hcon, /* connection handle */
&CompCode, /* completion code */
&Reason); /* reason code */
/* report reason, if any */
if (Reason != MQRC_NONE)
{
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]MQDISC ended with reason code %d\n",__FILE__,__LINE__, Reason);
}
}
/******************************************************************/
/* */
/* END OF AMQSPUT0 */
/* */
/******************************************************************/
SysLog(LOG_CHNL_ERR,"FILE[%s] LINE[%d]Sample AMQSPUT0 end\n",__FILE__,__LINE__);
return(0);
}
