示例#1
0
/* 
  Sets Innodb buffer pool size (1/8 of RAM by default), if not already specified
  via command line.
  Calculates innodb log file size as min(50, innodb buffer pool size/8)
*/
extern "C" UINT __stdcall PresetDatabaseProperties(MSIHANDLE hInstall)
{
  unsigned long long InnodbBufferPoolSize= 256;
  unsigned long long InnodbLogFileSize= 50;
  wchar_t buff[MAX_PATH];
  UINT er = ERROR_SUCCESS;
  HRESULT hr= S_OK;
  MEMORYSTATUSEX memstatus;
  hr = WcaInitialize(hInstall, __FUNCTION__);
  ExitOnFailure(hr, "Failed to initialize");
  WcaLog(LOGMSG_STANDARD, "Initialized.");

  /* Check if bufferpoolsize parameter was given on the command line*/
  DWORD BufferPoolsizeParamLen = MAX_PATH;
  MsiGetPropertyW(hInstall, L"BUFFERPOOLSIZE", buff, &BufferPoolsizeParamLen);

  if (BufferPoolsizeParamLen && buff[0])
  {
    WcaLog(LOGMSG_STANDARD, "BUFFERPOOLSIZE=%s, len=%u",buff, BufferPoolsizeParamLen);
    InnodbBufferPoolSize= _wtoi64(buff);
  }
  else
  {
    memstatus.dwLength = sizeof(memstatus);
    if (!GlobalMemoryStatusEx(&memstatus))
    {
       WcaLog(LOGMSG_STANDARD, "Error %u from GlobalMemoryStatusEx", 
         GetLastError());
       er= ERROR_INSTALL_FAILURE;
       goto LExit;
    }
    unsigned long long totalPhys= memstatus.ullTotalPhys;
    /* Give innodb 12.5% of available physical memory. */
    InnodbBufferPoolSize= totalPhys/ONE_MB/8;
 #ifdef _M_IX86
    /* 
      For 32 bit processes, take virtual address space limitation into account.
      Do not try to use more than 3/4 of virtual address space, even if there
      is plenty of physical memory.
    */
    InnodbBufferPoolSize= min(GetMaxBufferSize(totalPhys)/ONE_MB*3/4,
      InnodbBufferPoolSize);
 #endif 
    swprintf_s(buff, L"%llu",InnodbBufferPoolSize);
    MsiSetPropertyW(hInstall, L"BUFFERPOOLSIZE", buff);
  }
  InnodbLogFileSize = min(50, InnodbBufferPoolSize);
  swprintf_s(buff, L"%llu",InnodbLogFileSize);
  MsiSetPropertyW(hInstall, L"LOGFILESIZE", buff);

LExit:
  return WcaFinalize(er);
}
示例#2
0
static UINT errorConvertFromHResult(MSIHANDLE hModule, HRESULT hr)
{
    UINT uRet;
    switch (hr)
    {
        case S_OK:
            uRet = ERROR_SUCCESS;
            break;

        case NETCFG_S_REBOOT:
        {
            logStringW(hModule, L"Reboot required, setting REBOOT property to \"force\"");
            HRESULT hr2 = MsiSetPropertyW(hModule, L"REBOOT", L"Force");
            if (hr2 != ERROR_SUCCESS)
                logStringW(hModule, L"Failed to set REBOOT property, error = 0x%x", hr2);
            uRet = ERROR_SUCCESS; /* Never fail here. */
            break;
        }

        default:
            logStringW(hModule, L"Converting unhandled HRESULT (0x%x) to ERROR_GEN_FAILURE", hr);
            uRet = ERROR_GEN_FAILURE;
    }
    return uRet;
}
示例#3
0
/**
* \par Implementation
* The center of the implementation is the <a href="http://msdn.microsoft.com/en-us/library/windows/desktop/aa370391%28v=vs.85%29.aspx">MsiSetProperty function</a>.
*/
void Property::operator=(const std::wstring& value)
{
  UINT x = MsiSetPropertyW(handle, name.c_str(), value.c_str());
  if (x != ERROR_SUCCESS)
  {
    throw WindowsApiError("MsiSetPropertyW", x);
  }
}
示例#4
0
UINT __stdcall CreateHostOnlyInterface(MSIHANDLE hModule)
{
#ifdef VBOX_WITH_NETFLT
    netCfgLoggerEnable(hModule);

    BOOL bSetupModeInteractive = SetupSetNonInteractiveMode(FALSE);
    bool bSetStaticIp = true;

    logStringW(hModule, L"CreateHostOnlyInterface: Creating host-only interface");

    HRESULT hr;

    GUID guid;
    WCHAR wszMpInf[MAX_PATH];
    DWORD cchMpInf = RT_ELEMENTS(wszMpInf) - sizeof("VBoxNetAdp.inf") - 1;
    LPCWSTR pwszInfPath = NULL;
    bool bIsFile = false;
    UINT uErr = MsiGetPropertyW(hModule, L"CustomActionData", wszMpInf, &cchMpInf);
    if (uErr == ERROR_SUCCESS)
    {
        if (cchMpInf)
        {
            logStringW(hModule, L"CreateHostOnlyInterface: NetAdpDir property = %s", wszMpInf);
            if (wszMpInf[cchMpInf - 1] != L'\\')
            {
                wszMpInf[cchMpInf++] = L'\\';
                wszMpInf[cchMpInf]   = L'\0';
            }

            wcscat(wszMpInf, L"VBoxNetAdp.inf");
            pwszInfPath = wszMpInf;
            bIsFile = true;

            logStringW(hModule, L"CreateHostOnlyInterface: Resulting INF path = %s", pwszInfPath);
        }
        else
            logStringW(hModule, L"CreateHostOnlyInterface: VBox installation path is empty");
    }
    else
        logStringW(hModule, L"CreateHostOnlyInterface: Unable to retrieve VBox installation path, error = 0x%x", uErr);

    /* Make sure the inf file is installed. */
    if (pwszInfPath != NULL && bIsFile)
    {
        logStringW(hModule, L"CreateHostOnlyInterface: Calling VBoxDrvCfgInfInstall(%s)", pwszInfPath);
        hr = VBoxDrvCfgInfInstall(pwszInfPath);
        logStringW(hModule, L"CreateHostOnlyInterface: VBoxDrvCfgInfInstall returns 0x%x", hr);
        if (FAILED(hr))
            logStringW(hModule, L"CreateHostOnlyInterface: Failed to install INF file, error = 0x%x", hr);
    }

    if (SUCCEEDED(hr))
    {
    //first, try to update Host Only Network Interface
        BOOL fRebootRequired = FALSE;
        hr = VBoxNetCfgWinUpdateHostOnlyNetworkInterface(pwszInfPath, &fRebootRequired);
        if (SUCCEEDED(hr))
        {
            if (fRebootRequired)
            {
                logStringW(hModule, L"UpdateHostOnlyInterfaces: Reboot required, setting REBOOT property to force");
                HRESULT hr2 = MsiSetPropertyW(hModule, L"REBOOT", L"Force");
                if (hr2 != ERROR_SUCCESS)
                    logStringW(hModule, L"UpdateHostOnlyInterfaces: Failed to set REBOOT property, error = 0x%x", hr2);
            }
        }
        else
            logStringW(hModule, L"UpdateHostOnlyInterfaces: VBoxNetCfgWinUpdateHostOnlyNetworkInterface failed, hr = 0x%x", hr);
    //in fail case call CreateHostOnlyInterface
        if (FAILED(hr))
        {
            logStringW(hModule, L"CreateHostOnlyInterface: calling VBoxNetCfgWinCreateHostOnlyNetworkInterface");
            hr = VBoxNetCfgWinCreateHostOnlyNetworkInterface(pwszInfPath, bIsFile, &guid, NULL, NULL);
            logStringW(hModule, L"CreateHostOnlyInterface: VBoxNetCfgWinCreateHostOnlyNetworkInterface returns 0x%x", hr);
            if (SUCCEEDED(hr))
            {
                ULONG ip = inet_addr("192.168.56.1");
                ULONG mask = inet_addr("255.255.255.0");
                logStringW(hModule, L"CreateHostOnlyInterface: calling VBoxNetCfgWinEnableStaticIpConfig");
                hr = VBoxNetCfgWinEnableStaticIpConfig(&guid, ip, mask);
                logStringW(hModule, L"CreateHostOnlyInterface: VBoxNetCfgWinEnableStaticIpConfig returns 0x%x", hr);
                if (FAILED(hr))
                    logStringW(hModule, L"CreateHostOnlyInterface: VBoxNetCfgWinEnableStaticIpConfig failed, error = 0x%x", hr);
            }
            else
                logStringW(hModule, L"CreateHostOnlyInterface: VBoxNetCfgWinCreateHostOnlyNetworkInterface failed, error = 0x%x", hr);
        }
    }

    if (SUCCEEDED(hr))
        logStringW(hModule, L"CreateHostOnlyInterface: Creating host-only interface done");

    /* Restore original setup mode. */
    logStringW(hModule, L"CreateHostOnlyInterface: Almost done...");
    if (bSetupModeInteractive)
        SetupSetNonInteractiveMode(bSetupModeInteractive);

    netCfgLoggerDisable();

#endif /* VBOX_WITH_NETFLT */

    logStringW(hModule, L"CreateHostOnlyInterface: Returns success (ignoring all failures)");
    /* Never fail the install even if we did not succeed. */
    return ERROR_SUCCESS;
}
示例#5
0
UINT __stdcall UpdateHostOnlyInterfaces(MSIHANDLE hModule)
{
#ifdef VBOX_WITH_NETFLT
    netCfgLoggerEnable(hModule);

    logStringW(hModule, L"UpdateHostOnlyInterfaces: Updating all host-only interfaces");

    BOOL bSetupModeInteractive = SetupSetNonInteractiveMode(FALSE);

    WCHAR wszMpInf[MAX_PATH];
    DWORD cchMpInf = RT_ELEMENTS(wszMpInf) - sizeof("VBoxNetAdp.inf") - 1;
    LPCWSTR pwszInfPath = NULL;
    bool bIsFile = false;
    UINT uErr = MsiGetPropertyW(hModule, L"CustomActionData", wszMpInf, &cchMpInf);
    if (uErr == ERROR_SUCCESS)
    {
        if (cchMpInf)
        {
            logStringW(hModule, L"UpdateHostOnlyInterfaces: NetAdpDir property = %s", wszMpInf);
            if (wszMpInf[cchMpInf - 1] != L'\\')
            {
                wszMpInf[cchMpInf++] = L'\\';
                wszMpInf[cchMpInf]   = L'\0';
            }

            wcscat(wszMpInf, L"VBoxNetAdp.inf");
            pwszInfPath = wszMpInf;
            bIsFile = true;

            logStringW(hModule, L"UpdateHostOnlyInterfaces: Resulting INF path = %s", pwszInfPath);

            DWORD attrFile = GetFileAttributesW(pwszInfPath);
            if (attrFile == INVALID_FILE_ATTRIBUTES)
            {
                DWORD dwErr = GetLastError();
                logStringW(hModule, L"UpdateHostOnlyInterfaces: File \"%s\" not found, dwErr=%ld",
                           pwszInfPath, dwErr);
            }
            else
            {
                logStringW(hModule, L"UpdateHostOnlyInterfaces: File \"%s\" exists",
                           pwszInfPath);

                BOOL fRebootRequired = FALSE;
                HRESULT hr = VBoxNetCfgWinUpdateHostOnlyNetworkInterface(pwszInfPath, &fRebootRequired);
                if (SUCCEEDED(hr))
                {
                    if (fRebootRequired)
                    {
                        logStringW(hModule, L"UpdateHostOnlyInterfaces: Reboot required, setting REBOOT property to force");
                        HRESULT hr2 = MsiSetPropertyW(hModule, L"REBOOT", L"Force");
                        if (hr2 != ERROR_SUCCESS)
                            logStringW(hModule, L"UpdateHostOnlyInterfaces: Failed to set REBOOT property, error = 0x%x", hr2);
                    }
                }
                else
                    logStringW(hModule, L"UpdateHostOnlyInterfaces: VBoxNetCfgWinUpdateHostOnlyNetworkInterface failed, hr = 0x%x", hr);
            }
        }
        else
            logStringW(hModule, L"UpdateHostOnlyInterfaces: VBox installation path is empty");
    }
    else
        logStringW(hModule, L"UpdateHostOnlyInterfaces: Unable to retrieve VBox installation path, error = 0x%x", uErr);

    /* Restore original setup mode. */
    if (bSetupModeInteractive)
        SetupSetNonInteractiveMode(bSetupModeInteractive);

    netCfgLoggerDisable();
#endif /* VBOX_WITH_NETFLT */

    /* Never fail the install even if we did not succeed. */
    return ERROR_SUCCESS;
}
示例#6
0
extern "C" UINT __stdcall CheckServiceUpgrades(MSIHANDLE hInstall) 
{
  HRESULT hr = S_OK;
  UINT er = ERROR_SUCCESS;
  wchar_t* service= 0;
  wchar_t* dir= 0;
  wchar_t installerVersion[MAX_VERSION_PROPERTY_SIZE];
  char installDir[MAX_PATH];
  DWORD size =MAX_VERSION_PROPERTY_SIZE;
  int installerMajorVersion, installerMinorVersion, installerPatchVersion;
  bool upgradableServiceFound=false;

  hr = WcaInitialize(hInstall, __FUNCTION__);
   WcaLog(LOGMSG_STANDARD, "Initialized.");
  if (MsiGetPropertyW(hInstall, L"ProductVersion", installerVersion, &size) 
    != ERROR_SUCCESS)
  {
    hr = HRESULT_FROM_WIN32(GetLastError());
    ExitOnFailure(hr, "MsiGetPropertyW failed");
  }
   if (swscanf(installerVersion,L"%d.%d.%d",
    &installerMajorVersion, &installerMinorVersion, &installerPatchVersion) !=3)
  {
    assert(FALSE);
  }

  size= MAX_PATH;
  if (MsiGetPropertyA(hInstall,"INSTALLDIR", installDir, &size)
    != ERROR_SUCCESS)
  {
    hr = HRESULT_FROM_WIN32(GetLastError());
    ExitOnFailure(hr, "MsiGetPropertyW failed");
  }
 

  SC_HANDLE scm = OpenSCManager(NULL, NULL, 
    SC_MANAGER_ENUMERATE_SERVICE | SC_MANAGER_CONNECT);  
  if (scm == NULL) 
  { 
    hr = HRESULT_FROM_WIN32(GetLastError());
    ExitOnFailure(hr,"OpenSCManager failed");
  }

  static BYTE buf[64*1024];
  static BYTE config_buffer[8*1024];

  DWORD bufsize= sizeof(buf);
  DWORD bufneed;
  DWORD num_services;
  BOOL ok= EnumServicesStatusExW(scm, SC_ENUM_PROCESS_INFO,  SERVICE_WIN32,
    SERVICE_STATE_ALL,  buf, bufsize,  &bufneed, &num_services, NULL, NULL);
  if(!ok) 
  {
    hr = HRESULT_FROM_WIN32(GetLastError());
    ExitOnFailure(hr,"EnumServicesStatusEx failed");
  }
  LPENUM_SERVICE_STATUS_PROCESSW info =
    (LPENUM_SERVICE_STATUS_PROCESSW)buf;
  int index=-1;
  for (ULONG i=0; i < num_services; i++)
  {
    SC_HANDLE service= OpenServiceW(scm, info[i].lpServiceName, 
      SERVICE_QUERY_CONFIG);
    if (!service)
      continue;
    QUERY_SERVICE_CONFIGW *config= 
      (QUERY_SERVICE_CONFIGW*)(void *)config_buffer;
    DWORD needed;
    BOOL ok= QueryServiceConfigW(service, config,sizeof(config_buffer),
      &needed);
    CloseServiceHandle(service);
    if (ok)
    {
        mysqld_service_properties props;
       if (get_mysql_service_properties(config->lpBinaryPathName, &props))
                  continue;
        /* 
          Only look for services that have mysqld.exe outside of the current
          installation directory.
        */
       if(installDir[0] == 0 || strstr(props.mysqld_exe,installDir) == 0)
        {
           WcaLog(LOGMSG_STANDARD, "found service %S, major=%d, minor=%d",
            info[i].lpServiceName, props.version_major, props.version_minor);
          if(props.version_major < installerMajorVersion
            || (props.version_major == installerMajorVersion && 
                props.version_minor <= installerMinorVersion))
          {
            upgradableServiceFound= true;
            break;
          }
       }
    }
  }

  if(!upgradableServiceFound)
  {
    /* Disable optional checkbox at the end of installation */
    MsiSetPropertyW(hInstall, L"WIXUI_EXITDIALOGOPTIONALCHECKBOXTEXT", L"");
    MsiSetPropertyW(hInstall, L"WIXUI_EXITDIALOGOPTIONALCHECKBOX",L"");
  }
  else
  {
    MsiSetPropertyW(hInstall, L"UpgradableServiceFound", L"1");
    MsiSetPropertyW(hInstall, L"WIXUI_EXITDIALOGOPTIONALCHECKBOX",L"1");
  }
LExit:
  if(scm)
    CloseServiceHandle(scm);
  return WcaFinalize(er); 
}
示例#7
0
/*
  Checks SERVICENAME, PORT and BUFFERSIZE parameters 
*/
extern "C" UINT  __stdcall CheckDatabaseProperties (MSIHANDLE hInstall) 
{
  wchar_t ServiceName[MAX_PATH]={0};
  wchar_t SkipNetworking[MAX_PATH]={0};
  wchar_t QuickConfig[MAX_PATH]={0};
  wchar_t Password[MAX_PATH]={0};
  wchar_t EscapedPassword[2*MAX_PATH+2];
  wchar_t Port[6];
  wchar_t BufferPoolSize[16];
  DWORD PortLen=6;
  bool haveInvalidPort=false;
  const wchar_t *ErrorMsg=0;
  HRESULT hr= S_OK;
  UINT er= ERROR_SUCCESS;


  hr = WcaInitialize(hInstall, __FUNCTION__);
  ExitOnFailure(hr, "Failed to initialize");
  WcaLog(LOGMSG_STANDARD, "Initialized.");

  DWORD ServiceNameLen = MAX_PATH;
  MsiGetPropertyW (hInstall, L"SERVICENAME", ServiceName, &ServiceNameLen);
  if(ServiceName[0])
  {
    if(ServiceNameLen > 256)
    {
      ErrorMsg= L"Invalid service name. The maximum length is 256 characters.";
      goto LExit;
    }
    for(DWORD i=0; i< ServiceNameLen;i++)
    {
      if(ServiceName[i] == L'\\' || ServiceName[i] == L'/' 
        || ServiceName[i]=='\'' || ServiceName[i] ==L'"')
      {
        ErrorMsg = 
          L"Invalid service name. Forward slash and back slash are forbidden."
          L"Single and double quotes are also not permitted.";
        goto LExit;
      }
    }
    if(CheckServiceExists(ServiceName))
    {
      ErrorMsg=
        L"A service with the same name already exists. "
        L"Please use a different name.";
      goto LExit;
    }
  }

  DWORD PasswordLen= MAX_PATH;
  MsiGetPropertyW (hInstall, L"PASSWORD", Password, &PasswordLen);
  EscapeCommandLine(Password, EscapedPassword,
    sizeof(EscapedPassword)/sizeof(EscapedPassword[0]));
  MsiSetPropertyW(hInstall,L"ESCAPEDPASSWORD",EscapedPassword);

  DWORD SkipNetworkingLen= MAX_PATH;
  MsiGetPropertyW(hInstall, L"SKIPNETWORKING", SkipNetworking, 
    &SkipNetworkingLen);
  MsiGetPropertyW(hInstall, L"PORT", Port, &PortLen);
  
  if(SkipNetworking[0]==0 && Port[0] != 0)
  {
    /* Strip spaces */
    for(DWORD i=PortLen-1; i > 0; i--)
    {
      if(Port[i]== ' ')
        Port[i] = 0;
    }

    if(PortLen > 5 || PortLen <= 3)
      haveInvalidPort = true;
    else
    {
      for (DWORD i=0; i< PortLen && Port[i] != 0;i++)
      {
        if(Port[i] < '0' || Port[i] >'9')
        {
          haveInvalidPort=true;
          break;
        }
      }
    }
    if (haveInvalidPort)
    {
      ErrorMsg =
        L"Invalid port number. Please use a number between 1025 and 65535.";
      goto LExit;
    }

    short port = (short)_wtoi(Port);
    if (!IsPortFree(port))
    {
      ErrorMsg = 
        L"The TCP Port you selected is already in use. "
        L"Please choose a different port.";
      goto LExit;
    }
  }
  
  
  DWORD QuickConfigLen = MAX_PATH;
  MsiGetPropertyW (hInstall, L"STDCONFIG", QuickConfig, &QuickConfigLen);
  if(QuickConfig[0] !=0)
  {
     MEMORYSTATUSEX memstatus;
     memstatus.dwLength =sizeof(memstatus);
     wchar_t invalidValueMsg[256];

     if (!GlobalMemoryStatusEx(&memstatus))
     {
        WcaLog(LOGMSG_STANDARD, "Error %u from GlobalMemoryStatusEx", 
          GetLastError());
        er= ERROR_INSTALL_FAILURE;
        goto LExit;
     }
     DWORD BufferPoolSizeLen= 16;
     MsiGetPropertyW(hInstall, L"BUFFERPOOLSIZE", BufferPoolSize, &BufferPoolSizeLen);
     /* Strip spaces */
     for(DWORD i=BufferPoolSizeLen-1; i > 0; i--)
     {
      if(BufferPoolSize[i]== ' ')
        BufferPoolSize[i] = 0;
     }
     unsigned long long availableMemory=
       GetMaxBufferSize(memstatus.ullTotalPhys)/ONE_MB;
     swprintf_s(invalidValueMsg,
        L"Invalid buffer pool size. Please use a number between 1 and %llu",
         availableMemory);
     if(BufferPoolSizeLen == 0 || BufferPoolSizeLen > 15)
     {
       ErrorMsg= invalidValueMsg;
       goto LExit;
     }
     for (DWORD i=0; i < BufferPoolSizeLen && BufferPoolSize[BufferPoolSizeLen];
       i++)
     {
       if(BufferPoolSize[i]< '0' || BufferPoolSize[i] > '9')
       {
         ErrorMsg= invalidValueMsg;
         goto LExit;
       }
     }
     BufferPoolSize[BufferPoolSizeLen]=0;
     MsiSetPropertyW(hInstall, L"BUFFERPOOLSIZE", BufferPoolSize);
     long long sz = _wtoi64(BufferPoolSize);
     if(sz <= 0 || sz > (long long)availableMemory)
     {
       if(sz > 0)
       {
         swprintf_s(invalidValueMsg,
           L"Value for buffer pool size is too large."
           L"Only approximately %llu MB is available for allocation."
           L"Please use a number between 1 and %llu.",
          availableMemory, availableMemory);
       }
       ErrorMsg= invalidValueMsg;
       goto LExit;
     }
  }
LExit:
  MsiSetPropertyW (hInstall, L"WarningText", ErrorMsg);
  return WcaFinalize(er);
}
示例#8
0
UINT VBoxSetProperty(MSIHANDLE a_hModule, WCHAR *a_pwszName, WCHAR *a_pwszValue)
{
    return MsiSetPropertyW(a_hModule, a_pwszName, a_pwszValue);
}