int
main(int argc, char *argv[])
{
extern int optind;
extern int optopt;
extern char *optarg;
int c;
int nfailsTotal = 0; /* total number of failures */
#if 1 /* both CRAY MPP and OSF/1 Alpha systems need this */
/*
* Some of the extreme test assignments in this program trigger
* floating point exceptions on CRAY T90
*/
(void) signal(SIGFPE, SIG_IGN);
#endif
progname = argv[0];
create_file = 0; /* file test.nc will normally already exist */
read_only = 0; /* assume may write in test dir as default */
verbose = 0;
max_nmpt = 8;
while ((c = getopt(argc, argv, "chrvn:")) != EOF)
switch(c) {
case 'c': /* Create file test.nc */
create_file = 1;
break;
case 'r': /* just perform read-only tests */
read_only = 1;
break;
case 'v': /* verbose mode */
verbose = 1;
break;
case 'n': /* verbose mode */
max_nmpt = atoi(optarg);
break;
case 'h':
case '?':
usage();
return 1;
}
/* Initialize global variables defining test file */
init_gvars();
if ( create_file ) {
write_file(testfile);
return nfailsTotal > 0;
}
/* delete any existing scratch netCDF file */
if ( ! read_only )
(void) remove(scratch);
/* Test read-only functions, using pregenerated test-file */
NC_TEST(nc_strerror);
NC_TEST(nc_open);
NC_TEST(nc_close);
NC_TEST(nc_inq);
NC_TEST(nc_inq_dimid);
NC_TEST(nc_inq_dim);
NC_TEST(nc_inq_dimlen);
NC_TEST(nc_inq_dimname);
NC_TEST(nc_inq_varid);
NC_TEST(nc_inq_var);
NC_TEST(nc_inq_natts);
NC_TEST(nc_inq_ndims);
NC_TEST(nc_inq_nvars);
NC_TEST(nc_inq_unlimdim);
NC_TEST(nc_inq_vardimid);
NC_TEST(nc_inq_varname);
NC_TEST(nc_inq_varnatts);
NC_TEST(nc_inq_varndims);
NC_TEST(nc_inq_vartype);
NC_TEST(nc_get_var_text);
NC_TEST(nc_get_var_uchar);
NC_TEST(nc_get_var_schar);
NC_TEST(nc_get_var_short);
NC_TEST(nc_get_var_int);
NC_TEST(nc_get_var_long);
NC_TEST(nc_get_var_float);
NC_TEST(nc_get_var_double);
NC_TEST(nc_get_var1_text);
NC_TEST(nc_get_var1_uchar);
NC_TEST(nc_get_var1_schar);
NC_TEST(nc_get_var1_short);
NC_TEST(nc_get_var1_int);
NC_TEST(nc_get_var1_long);
NC_TEST(nc_get_var1_float);
NC_TEST(nc_get_var1_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_get_var1);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_get_vara_text);
NC_TEST(nc_get_vara_uchar);
NC_TEST(nc_get_vara_schar);
NC_TEST(nc_get_vara_short);
NC_TEST(nc_get_vara_int);
NC_TEST(nc_get_vara_long);
NC_TEST(nc_get_vara_float);
NC_TEST(nc_get_vara_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_get_vara);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_get_vars_text);
NC_TEST(nc_get_vars_uchar);
NC_TEST(nc_get_vars_schar);
NC_TEST(nc_get_vars_short);
NC_TEST(nc_get_vars_int);
NC_TEST(nc_get_vars_long);
NC_TEST(nc_get_vars_float);
NC_TEST(nc_get_vars_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_get_vars);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_get_varm_text);
NC_TEST(nc_get_varm_uchar);
NC_TEST(nc_get_varm_schar);
NC_TEST(nc_get_varm_short);
NC_TEST(nc_get_varm_int);
NC_TEST(nc_get_varm_long);
NC_TEST(nc_get_varm_float);
NC_TEST(nc_get_varm_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_get_varm);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_get_att_text);
NC_TEST(nc_get_att_uchar);
NC_TEST(nc_get_att_schar);
NC_TEST(nc_get_att_short);
NC_TEST(nc_get_att_int);
NC_TEST(nc_get_att_long);
NC_TEST(nc_get_att_float);
NC_TEST(nc_get_att_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_get_att);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_inq_att);
NC_TEST(nc_inq_attname);
NC_TEST(nc_inq_attid);
NC_TEST(nc_inq_attlen);
NC_TEST(nc_inq_atttype);
/* Test write functions */
if (! read_only) {
NC_TEST(nc_create);
NC_TEST(nc_redef);
/* NC_TEST(nc_enddef); *//* redundant */
NC_TEST(nc_sync);
NC_TEST(nc_abort);
NC_TEST(nc_def_dim);
NC_TEST(nc_rename_dim);
NC_TEST(nc_def_var);
NC_TEST(nc_put_var_text);
NC_TEST(nc_put_var_uchar);
NC_TEST(nc_put_var_schar);
NC_TEST(nc_put_var_short);
NC_TEST(nc_put_var_int);
NC_TEST(nc_put_var_long);
NC_TEST(nc_put_var_float);
NC_TEST(nc_put_var_double);
NC_TEST(nc_put_var1_text);
NC_TEST(nc_put_var1_uchar);
NC_TEST(nc_put_var1_schar);
NC_TEST(nc_put_var1_short);
NC_TEST(nc_put_var1_int);
NC_TEST(nc_put_var1_long);
NC_TEST(nc_put_var1_float);
NC_TEST(nc_put_var1_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_put_var1);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_put_vara_text);
NC_TEST(nc_put_vara_uchar);
NC_TEST(nc_put_vara_schar);
NC_TEST(nc_put_vara_short);
NC_TEST(nc_put_vara_int);
NC_TEST(nc_put_vara_long);
NC_TEST(nc_put_vara_float);
NC_TEST(nc_put_vara_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_put_vara);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_put_vars_text);
NC_TEST(nc_put_vars_uchar);
NC_TEST(nc_put_vars_schar);
NC_TEST(nc_put_vars_short);
NC_TEST(nc_put_vars_int);
NC_TEST(nc_put_vars_long);
NC_TEST(nc_put_vars_float);
NC_TEST(nc_put_vars_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_put_vars);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_put_varm_text);
NC_TEST(nc_put_varm_uchar);
NC_TEST(nc_put_varm_schar);
NC_TEST(nc_put_varm_short);
NC_TEST(nc_put_varm_int);
NC_TEST(nc_put_varm_long);
NC_TEST(nc_put_varm_float);
NC_TEST(nc_put_varm_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_put_varm);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_rename_var);
NC_TEST(nc_put_att_text);
NC_TEST(nc_put_att_uchar);
NC_TEST(nc_put_att_schar);
NC_TEST(nc_put_att_short);
NC_TEST(nc_put_att_int);
NC_TEST(nc_put_att_long);
NC_TEST(nc_put_att_float);
NC_TEST(nc_put_att_double);
#ifdef TEST_VOIDSTAR
NC_TEST(nc_put_att);
#endif /* TEST_VOIDSTAR */
NC_TEST(nc_copy_att);
NC_TEST(nc_rename_att);
NC_TEST(nc_del_att);
NC_TEST(nc_set_fill);
}
print( "\nTotal number of failures: %d\n", nfailsTotal);
return nfailsTotal > 0;
}
int
main(int argc, char *argv[])
{
int i;
int nfailsTotal = 0; /* total number of failures */
/* Both CRAY MPP and OSF/1 Alpha systems need this. Some of the
* extreme test assignments in this program trigger floating point
* exceptions on CRAY T90
*/
(void) signal(SIGFPE, SIG_IGN);
verbose = 0;
max_nmpt = 8;
/* Initialize global variables defining test file */
init_gvars();
/* If you uncomment the nc_set_log_level line, you will get a lot
* of debugging info. If you set the number higher, you'll get
* more. 6 is max, 0 shows only errors. 3 is a good place to
* start. */
/*nc_set_log_level(3);*/
fprintf(stderr, "Testing %d different netCDF formats.\n", NUM_FORMATS);
/* Go thru formats and run all tests for each of two (for netCDF-3
* only builds), or 3 (for netCDF-4 builds) different formats. Do
* the netCDF-4 format last, however, because, as an additional
* test, the ../nc_test4/tst_nc_test_file program looks at the
* output of this program. */
for (i = 1; i <= NUM_FORMATS; i++)
{
switch (i)
{
case NC_FORMAT_CLASSIC:
nc_set_default_format(NC_FORMAT_CLASSIC, NULL);
fprintf(stderr, "\n\nSwitching to netCDF classic format.\n");
strcpy(testfile, "nc_test_classic.nc");
break;
case NC_FORMAT_64BIT:
nc_set_default_format(NC_FORMAT_64BIT, NULL);
fprintf(stderr, "\n\nSwitching to 64-bit offset format.\n");
strcpy(testfile, "nc_test_64bit.nc");
break;
#ifdef USE_NETCDF4
case NC_FORMAT_NETCDF4: /* actually it's _CLASSIC. */
nc_set_default_format(NC_FORMAT_NETCDF4_CLASSIC, NULL);
strcpy(testfile, "nc_test_netcdf4.nc");
fprintf(stderr, "\n\nSwitching to netCDF-4 format (with NC_CLASSIC_MODEL).\n");
break;
#endif
default:
fprintf(stderr, "Unexpected format!\n");
return 2;
}
/* Write the test file, needed for the read-only tests below. */
write_file(testfile);
/* delete any existing scratch netCDF file */
(void) remove(scratch);
/* Test read-only functions, using pre-generated test-file */
NC_TEST(nc_strerror);
NC_TEST(nc_open);
NC_TEST(nc_close);
NC_TEST(nc_inq);
NC_TEST(nc_inq_dimid);
NC_TEST(nc_inq_dim);
NC_TEST(nc_inq_dimlen);
NC_TEST(nc_inq_dimname);
NC_TEST(nc_inq_varid);
NC_TEST(nc_inq_var);
NC_TEST(nc_inq_natts);
NC_TEST(nc_inq_ndims);
NC_TEST(nc_inq_nvars);
NC_TEST(nc_inq_unlimdim);
NC_TEST(nc_inq_vardimid);
NC_TEST(nc_inq_varname);
NC_TEST(nc_inq_varnatts);
NC_TEST(nc_inq_varndims);
NC_TEST(nc_inq_vartype);
NC_TEST(nc_get_var_text);
NC_TEST(nc_get_var_uchar);
NC_TEST(nc_get_var_schar);
NC_TEST(nc_get_var_short);
NC_TEST(nc_get_var_int);
NC_TEST(nc_get_var_long);
NC_TEST(nc_get_var_float);
NC_TEST(nc_get_var_double);
NC_TEST(nc_get_var1_text);
NC_TEST(nc_get_var1_uchar);
NC_TEST(nc_get_var1_schar);
NC_TEST(nc_get_var1_short);
NC_TEST(nc_get_var1_int);
NC_TEST(nc_get_var1_long);
NC_TEST(nc_get_var1_float);
NC_TEST(nc_get_var1_double);
NC_TEST(nc_get_var1);
NC_TEST(nc_get_vara_text);
NC_TEST(nc_get_vara_uchar);
NC_TEST(nc_get_vara_schar);
NC_TEST(nc_get_vara_short);
NC_TEST(nc_get_vara_int);
NC_TEST(nc_get_vara_long);
NC_TEST(nc_get_vara_float);
NC_TEST(nc_get_vara_double);
NC_TEST(nc_get_vara);
NC_TEST(nc_get_vars_text);
NC_TEST(nc_get_vars_uchar);
NC_TEST(nc_get_vars_schar);
NC_TEST(nc_get_vars_short);
NC_TEST(nc_get_vars_int);
NC_TEST(nc_get_vars_long);
NC_TEST(nc_get_vars_float);
NC_TEST(nc_get_vars_double);
NC_TEST(nc_get_vars);
NC_TEST(nc_get_varm_text);
NC_TEST(nc_get_varm_uchar);
NC_TEST(nc_get_varm_schar);
NC_TEST(nc_get_varm_short);
NC_TEST(nc_get_varm_int);
NC_TEST(nc_get_varm_long);
NC_TEST(nc_get_varm_float);
NC_TEST(nc_get_varm_double);
NC_TEST(nc_get_varm);
NC_TEST(nc_get_att_text);
NC_TEST(nc_get_att_uchar);
NC_TEST(nc_get_att_schar);
NC_TEST(nc_get_att_short);
NC_TEST(nc_get_att_int);
NC_TEST(nc_get_att_long);
NC_TEST(nc_get_att_float);
NC_TEST(nc_get_att_double);
NC_TEST(nc_get_att);
NC_TEST(nc_inq_att);
NC_TEST(nc_inq_attname);
NC_TEST(nc_inq_attid);
NC_TEST(nc_inq_attlen);
NC_TEST(nc_inq_atttype);
/* Test write functions */
NC_TEST(nc_create);
NC_TEST(nc_redef);
/* NC_TEST(nc_enddef); *//* redundant */
NC_TEST(nc_sync);
NC_TEST(nc_abort);
NC_TEST(nc_def_dim);
NC_TEST(nc_rename_dim);
NC_TEST(nc_def_var);
NC_TEST(nc_put_var_text);
NC_TEST(nc_put_var_uchar);
NC_TEST(nc_put_var_schar);
NC_TEST(nc_put_var_short);
NC_TEST(nc_put_var_int);
NC_TEST(nc_put_var_long);
NC_TEST(nc_put_var_float);
NC_TEST(nc_put_var_double);
NC_TEST(nc_put_var1_text);
NC_TEST(nc_put_var1_uchar);
NC_TEST(nc_put_var1_schar);
NC_TEST(nc_put_var1_short);
NC_TEST(nc_put_var1_int);
NC_TEST(nc_put_var1_long);
NC_TEST(nc_put_var1_float);
NC_TEST(nc_put_var1_double);
NC_TEST(nc_put_var1);
NC_TEST(nc_put_vara_text);
NC_TEST(nc_put_vara_uchar);
NC_TEST(nc_put_vara_schar);
NC_TEST(nc_put_vara_short);
NC_TEST(nc_put_vara_int);
NC_TEST(nc_put_vara_long);
NC_TEST(nc_put_vara_float);
NC_TEST(nc_put_vara_double);
NC_TEST(nc_put_vara);
NC_TEST(nc_put_vars_text);
NC_TEST(nc_put_vars_uchar);
NC_TEST(nc_put_vars_schar);
NC_TEST(nc_put_vars_short);
NC_TEST(nc_put_vars_int);
NC_TEST(nc_put_vars_long);
NC_TEST(nc_put_vars_float);
NC_TEST(nc_put_vars_double);
NC_TEST(nc_put_vars);
NC_TEST(nc_put_varm_text);
NC_TEST(nc_put_varm_uchar);
NC_TEST(nc_put_varm_schar);
NC_TEST(nc_put_varm_short);
NC_TEST(nc_put_varm_int);
NC_TEST(nc_put_varm_long);
NC_TEST(nc_put_varm_float);
NC_TEST(nc_put_varm_double);
NC_TEST(nc_put_varm);
NC_TEST(nc_rename_var);
NC_TEST(nc_put_att_text);
NC_TEST(nc_put_att_uchar);
NC_TEST(nc_put_att_schar);
NC_TEST(nc_put_att_short);
NC_TEST(nc_put_att_int);
NC_TEST(nc_put_att_long);
NC_TEST(nc_put_att_float);
NC_TEST(nc_put_att_double);
NC_TEST(nc_put_att);
NC_TEST(nc_copy_att);
NC_TEST(nc_rename_att);
NC_TEST(nc_del_att);
NC_TEST(nc_set_default_format);
}
fprintf(stderr, "\n*** Total number of failures: %d\n", nfailsTotal);
if (nfailsTotal)
{
fprintf(stderr, "*** nc_test FAILURE!!!\n");
return 2;
}
else
fprintf(stderr, "*** nc_test SUCCESS!!!\n");
return 0;
}
