VOID
MPSendPackets(
IN NDIS_HANDLE MiniportAdapterContext,
IN PPNDIS_PACKET PacketArray,
IN UINT NumberOfPackets
)
/*++
Routine Description:
Send Packet Array handler. Either this or our SendPacket handler is called
based on which one is enabled in our Miniport Characteristics.
Arguments:
MiniportAdapterContext Pointer to our adapter
PacketArray Set of packets to send
NumberOfPackets Self-explanatory
Return Value:
None
--*/
{
PADAPT pAdapt = (PADAPT)MiniportAdapterContext;
NDIS_STATUS Status;
UINT i;
PVOID MediaSpecificInfo = NULL;
UINT MediaSpecificInfoSize = 0;
for (i = 0; i < NumberOfPackets; i++)
{
PNDIS_PACKET Packet, MyPacket;
ULONG SndFltAction;
Packet = PacketArray[i];
//
// The driver should fail the send if the virtual miniport is in low
// power state
//
if (pAdapt->MPDeviceState > NdisDeviceStateD0)
{
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
NDIS_STATUS_FAILURE);
continue;
}
//
// Call Send Packet Filter
//
SndFltAction = FltFilterSendPacket(
pAdapt,
Packet,
FALSE // Caller is running at IRQL <= DISPATCH_LEVEL
);
//
// Possibly Block (Drop) Packet
// ----------------------------
// Lying send. Report SUCCESS, even though it really hasn't
// been sent.
//
if( SndFltAction & ACTION_BLOCK_PACKET ) {
NdisMSendComplete( ADAPT_MINIPORT_HANDLE(pAdapt), Packet, NDIS_STATUS_SUCCESS);
continue;
}
#ifdef NDIS51
//
// Use NDIS 5.1 packet stacking:
//
{
PNDIS_PACKET_STACK pStack;
BOOLEAN Remaining;
//
// Packet stacks: Check if we can use the same packet for sending down.
//
pStack = NdisIMGetCurrentPacketStack(Packet, &Remaining);
if (Remaining)
{
//
// We can reuse "Packet".
//
// NOTE: if we needed to keep per-packet information in packets
// sent down, we can use pStack->IMReserved[].
//
ASSERT(pStack);
//
// If the below miniport is going to low power state, stop sending down any packet.
//
NdisAcquireSpinLock(&pAdapt->Lock);
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
NDIS_STATUS_FAILURE);
}
else
{
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
NdisSend(&Status,
pAdapt->BindingHandle,
Packet);
if (Status != NDIS_STATUS_PENDING)
{
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
Status);
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
continue;
}
}
#endif
do
{
NdisAcquireSpinLock(&pAdapt->Lock);
//
// If the below miniport is going to low power state, stop sending down any packet.
//
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
Status = NDIS_STATUS_FAILURE;
break;
}
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
NdisAllocatePacket(&Status,
&MyPacket,
pAdapt->SendPacketPoolHandle);
if (Status == NDIS_STATUS_SUCCESS)
{
PSEND_RSVD SendRsvd;
SendRsvd = (PSEND_RSVD)(MyPacket->ProtocolReserved);
SendRsvd->OriginalPkt = Packet;
MyPacket->Private.Flags = NdisGetPacketFlags(Packet);
MyPacket->Private.Head = Packet->Private.Head;
MyPacket->Private.Tail = Packet->Private.Tail;
#ifdef WIN9X
//
// Work around the fact that NDIS does not initialize this
// to FALSE on Win9x.
//
MyPacket->Private.ValidCounts = FALSE;
#endif // WIN9X
//
// Copy the OOB data from the original packet to the new
// packet.
//
NdisMoveMemory(NDIS_OOB_DATA_FROM_PACKET(MyPacket),
NDIS_OOB_DATA_FROM_PACKET(Packet),
sizeof(NDIS_PACKET_OOB_DATA));
//
// Copy relevant parts of the per packet info into the new packet
//
#ifndef WIN9X
NdisIMCopySendPerPacketInfo(MyPacket, Packet);
#endif
//
// Copy the Media specific information
//
NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(Packet,
&MediaSpecificInfo,
&MediaSpecificInfoSize);
if (MediaSpecificInfo || MediaSpecificInfoSize)
{
NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO(MyPacket,
MediaSpecificInfo,
MediaSpecificInfoSize);
}
NdisSend(&Status,
pAdapt->BindingHandle,
MyPacket);
if (Status != NDIS_STATUS_PENDING)
{
#ifndef WIN9X
NdisIMCopySendCompletePerPacketInfo (Packet, MyPacket);
#endif
NdisFreePacket(MyPacket);
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
else
{
//
// The driver cannot allocate a packet.
//
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
while (FALSE);
if (Status != NDIS_STATUS_PENDING)
{
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
Status);
}
}
}
VOID
MPSendPackets(
IN NDIS_HANDLE MiniportAdapterContext,
IN PPNDIS_PACKET PacketArray,
IN UINT NumberOfPackets
)
/*++
Routine Description:
Send Packet Array handler. Either this or our SendPacket handler is called
based on which one is enabled in our Miniport Characteristics.
Arguments:
MiniportAdapterContext Pointer to our adapter
PacketArray Set of packets to send
NumberOfPackets Self-explanatory
Return Value:
None
--*/
{
PADAPT pAdapt = (PADAPT)MiniportAdapterContext;
NDIS_STATUS Status;
UINT i;
PVOID MediaSpecificInfo = NULL;
UINT MediaSpecificInfoSize = 0;
FILTER_STATUS fStatus;
PUCHAR pBuffer;
int nBufLen;
for (i = 0; i < NumberOfPackets; i++)
{
PNDIS_PACKET Packet, MyPacket;
Packet = PacketArray[i];
//KdPrint(("微端口MPSendPackets方法,开始报文分析\n"));
getMemoryCopyFromPacket(Packet, &pBuffer, &nBufLen);
KdPrint(("\n==> 微端口MPSendPackets方法,开始分析报文\n"));
fStatus = analyzeBuffer(pAdapt, pBuffer, &nBufLen, MODE_SEND);
//fStatus = AnalysisPacket(Packet, FALSE);
//fStatus = FILTER_STATUS_PASS;
if (fStatus == FILTER_STATUS_DROP)
{
//丢弃
KdPrint(("<== 微端口MPSendPackets方法,进入FILTER_STATUS_DROP模式\n"));
freeMemory(pBuffer);
// 在这个函数中，任何一个被放弃的包，都必须调用NdisMSendComplete。
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt), Packet, NDIS_STATUS_FAILURE);
continue;
}
/*
else if (fStatus == FILTER_STATUS_MODIFY_REDIRECT)
{
//没有发送时接收转发这种情况
}
*/
else if (fStatus == FILTER_STATUS_MODIFY_SEND)
{
//修改+发送
KdPrint(("<== 微端口MPSendPackets方法,进入FILTER_STATUS_MODIFY_SEND模式\n"));
MyPacket = createPacketFromMemory_SendPool(pAdapt, pBuffer, nBufLen);
//freePacketBufferOnly(Packet);
// The driver should fail the send if the virtual miniport is in low
// power state
//
if (pAdapt->MPDeviceState > NdisDeviceStateD0)
{
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
NDIS_STATUS_FAILURE);
continue;
}
//这里原来有NDIS51的一个简化处理，放在此文件最下面了
do
{
PSEND_RSVD SendRsvd;
NdisAcquireSpinLock(&pAdapt->Lock);
//
// If the below miniport is going to low power state, stop sending down any packet.
//
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
Status = NDIS_STATUS_FAILURE;
break;
}
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
//NdisAllocatePacket(&Status,
// &MyPacket,
// pAdapt->SendPacketPoolHandle);
SendRsvd = (PSEND_RSVD)(MyPacket->ProtocolReserved);
SendRsvd->OriginalPkt = Packet;
NdisGetPacketFlags(MyPacket) = NdisGetPacketFlags(Packet);
NdisSetPacketFlags(MyPacket, NDIS_FLAGS_RESERVED4); //我们做个标记
//现在我们自己构造buffer，所以不需要用原packet的buffer了
//NDIS_PACKET_FIRST_NDIS_BUFFER(MyPacket) = NDIS_PACKET_FIRST_NDIS_BUFFER(Packet);
//NDIS_PACKET_LAST_NDIS_BUFFER(MyPacket) = NDIS_PACKET_LAST_NDIS_BUFFER(Packet);
//
// Copy the OOB data from the original packet to the new
// packet.
//
NdisMoveMemory(NDIS_OOB_DATA_FROM_PACKET(MyPacket),
NDIS_OOB_DATA_FROM_PACKET(Packet),
sizeof(NDIS_PACKET_OOB_DATA));
//
// Copy relevant parts of the per packet info into the new packet
//
NdisIMCopySendPerPacketInfo(MyPacket, Packet);
//
// Copy the Media specific information
//
NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(Packet,
&MediaSpecificInfo,
&MediaSpecificInfoSize);
if (MediaSpecificInfo || MediaSpecificInfoSize)
{
NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO(MyPacket,
MediaSpecificInfo,
MediaSpecificInfoSize);
}
NdisSend(&Status,
pAdapt->BindingHandle,
MyPacket);
if (Status != NDIS_STATUS_PENDING)
{
NdisIMCopySendCompletePerPacketInfo (Packet, MyPacket);
//NdisFreePacket(MyPacket);
freePacketBufferAndMemory(MyPacket);
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
while (FALSE);
if (Status != NDIS_STATUS_PENDING)
{
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
Status);
}
}
else //FILTER_STATUS_PASS
{
//按PASS处理
KdPrint(("<== 微端口MPSendPackets方法,进入FILTER_STATUS_PASS模式\n"));
freeMemory(pBuffer);
//
// The driver should fail the send if the virtual miniport is in low
// power state
//
if (pAdapt->MPDeviceState > NdisDeviceStateD0)
{
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
NDIS_STATUS_FAILURE);
continue;
}
//这里原来有NDIS51的一个简化处理，放在此文件最下面了
do
{
NdisAcquireSpinLock(&pAdapt->Lock);
//
// If the below miniport is going to low power state, stop sending down any packet.
//
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
Status = NDIS_STATUS_FAILURE;
break;
}
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
NdisAllocatePacket(&Status,
&MyPacket,
pAdapt->SendPacketPoolHandle);
if (Status == NDIS_STATUS_SUCCESS)
{
PSEND_RSVD SendRsvd;
SendRsvd = (PSEND_RSVD)(MyPacket->ProtocolReserved);
SendRsvd->OriginalPkt = Packet;
NdisGetPacketFlags(MyPacket) = NdisGetPacketFlags(Packet);
NdisClearPacketFlags(MyPacket, NDIS_FLAGS_RESERVED4); //防止和上面的包混淆
NDIS_PACKET_FIRST_NDIS_BUFFER(MyPacket) = NDIS_PACKET_FIRST_NDIS_BUFFER(Packet);
NDIS_PACKET_LAST_NDIS_BUFFER(MyPacket) = NDIS_PACKET_LAST_NDIS_BUFFER(Packet);
//
// Copy the OOB data from the original packet to the new
// packet.
//
NdisMoveMemory(NDIS_OOB_DATA_FROM_PACKET(MyPacket),
NDIS_OOB_DATA_FROM_PACKET(Packet),
sizeof(NDIS_PACKET_OOB_DATA));
//
// Copy relevant parts of the per packet info into the new packet
//
NdisIMCopySendPerPacketInfo(MyPacket, Packet);
//
// Copy the Media specific information
//
NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(Packet,
&MediaSpecificInfo,
&MediaSpecificInfoSize);
if (MediaSpecificInfo || MediaSpecificInfoSize)
{
NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO(MyPacket,
MediaSpecificInfo,
MediaSpecificInfoSize);
}
NdisSend(&Status,
pAdapt->BindingHandle,
MyPacket);
if (Status != NDIS_STATUS_PENDING)
{
NdisIMCopySendCompletePerPacketInfo (Packet, MyPacket);
NdisFreePacket(MyPacket);
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
else
{
//
// The driver cannot allocate a packet.
//
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
while (FALSE);
if (Status != NDIS_STATUS_PENDING)
{
NdisMSendComplete(ADAPT_MINIPORT_HANDLE(pAdapt),
Packet,
Status);
}
}
}
}
NDIS_STATUS
MPSend(
IN NDIS_HANDLE MiniportAdapterContext,
IN PNDIS_PACKET Packet,
IN UINT Flags
)
/*++
Routine Description:
Send Packet handler. Either this or our SendPackets (array) handler is called
based on which one is enabled in our Miniport Characteristics.
Arguments:
MiniportAdapterContext Pointer to the adapter
Packet Packet to send
Flags Unused, passed down below
Return Value:
Return code from NdisSend
--*/
{
PADAPT pAdapt = (PADAPT)MiniportAdapterContext;
NDIS_STATUS Status;
PNDIS_PACKET MyPacket;
PVOID MediaSpecificInfo = NULL;
ULONG MediaSpecificInfoSize = 0;
ULONG SndFltAction;
//
// The driver should fail the send if the virtual miniport is in low
// power state
//
if (pAdapt->MPDeviceState > NdisDeviceStateD0) {
return NDIS_STATUS_FAILURE;
}
//
// Call Send Packet Filter
//
SndFltAction = FltFilterSendPacket(
pAdapt,
Packet,
TRUE // Caller is running at IRQL DISPATCH_LEVEL
);
//
// Possibly Block (Drop) Packet
// ----------------------------
// Lying send. Report SUCCESS, even though it really hasn't
// been sent.
//
if( SndFltAction & ACTION_BLOCK_PACKET) {
return NDIS_STATUS_SUCCESS;
}
#ifdef NDIS51
//
// Use NDIS 5.1 packet stacking:
//
{
PNDIS_PACKET_STACK pStack;
BOOLEAN Remaining;
//
// Packet stacks: Check if we can use the same packet for sending down.
//
pStack = NdisIMGetCurrentPacketStack(Packet, &Remaining);
if (Remaining)
{
//
// We can reuse "Packet".
//
// NOTE: if we needed to keep per-packet information in packets
// sent down, we can use pStack->IMReserved[].
//
ASSERT(pStack);
//
// If the below miniport is going to low power state, stop sending down any packet.
//
NdisAcquireSpinLock(&pAdapt->Lock);
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
return NDIS_STATUS_FAILURE;
}
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
NdisSend(&Status,
pAdapt->BindingHandle,
Packet);
if (Status != NDIS_STATUS_PENDING)
{
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
return(Status);
}
}
#endif // NDIS51
//
// We are either not using packet stacks, or there isn't stack space
// in the original packet passed down to us. Allocate a new packet
// to wrap the data with.
//
//
// If the below miniport is going to low power state, stop sending down any packet.
//
NdisAcquireSpinLock(&pAdapt->Lock);
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
return NDIS_STATUS_FAILURE;
}
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
NdisAllocatePacket(&Status,
&MyPacket,
pAdapt->SendPacketPoolHandle);
if (Status == NDIS_STATUS_SUCCESS)
{
PSEND_RSVD SendRsvd;
//
// Save a pointer to the original packet in our reserved
// area in the new packet. This is needed so that we can
// get back to the original packet when the new packet's send
// is completed.
//
SendRsvd = (PSEND_RSVD)(MyPacket->ProtocolReserved);
SendRsvd->OriginalPkt = Packet;
MyPacket->Private.Flags = Flags;
//
// Set up the new packet so that it describes the same
// data as the original packet.
//
MyPacket->Private.Head = Packet->Private.Head;
MyPacket->Private.Tail = Packet->Private.Tail;
#ifdef WIN9X
//
// Work around the fact that NDIS does not initialize this
// to FALSE on Win9x.
//
MyPacket->Private.ValidCounts = FALSE;
#endif
//
// Copy the OOB Offset from the original packet to the new
// packet.
//
NdisMoveMemory(NDIS_OOB_DATA_FROM_PACKET(MyPacket),
NDIS_OOB_DATA_FROM_PACKET(Packet),
sizeof(NDIS_PACKET_OOB_DATA));
#ifndef WIN9X
//
// Copy the right parts of per packet info into the new packet.
// This API is not available on Win9x since task offload is
// not supported on that platform.
//
NdisIMCopySendPerPacketInfo(MyPacket, Packet);
#endif
//
// Copy the Media specific information
//
NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(Packet,
&MediaSpecificInfo,
&MediaSpecificInfoSize);
if (MediaSpecificInfo || MediaSpecificInfoSize)
{
NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO(MyPacket,
MediaSpecificInfo,
MediaSpecificInfoSize);
}
NdisSend(&Status,
pAdapt->BindingHandle,
MyPacket);
if (Status != NDIS_STATUS_PENDING)
{
#ifndef WIN9X
NdisIMCopySendCompletePerPacketInfo (Packet, MyPacket);
#endif
NdisFreePacket(MyPacket);
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
else
{
ADAPT_DECR_PENDING_SENDS(pAdapt);
//
// We are out of packets. Silently drop it. Alternatively we can deal with it:
// - By keeping separate send and receive pools
// - Dynamically allocate more pools as needed and free them when not needed
//
}
return(Status);
}
NDIS_STATUS
MPSend(
IN NDIS_HANDLE MiniportAdapterContext,
IN PNDIS_PACKET Packet,
IN UINT Flags
)
/*++
Routine Description:
Send Packet handler. Either this or our SendPackets (array) handler is called
based on which one is enabled in our Miniport Characteristics.
Arguments:
MiniportAdapterContext Pointer to the adapter
Packet Packet to send
Flags Unused, passed down below
Return Value:
Return code from NdisSend
--*/
{
PADAPT pAdapt = (PADAPT)MiniportAdapterContext;
NDIS_STATUS Status;
FILTER_STATUS fStatus;
PNDIS_PACKET MyPacket;
PVOID MediaSpecificInfo = NULL;
ULONG MediaSpecificInfoSize = 0;
//
// The driver should fail the send if the virtual miniport is in low
// power state
//
if (pAdapt->MPDeviceState > NdisDeviceStateD0)
{
return NDIS_STATUS_FAILURE;
}
//***************************此函数作废！！！！！！！！！！！！！！！************************************
//KdPrint(("微端口MPSend方法,开始报文分析\n"));
fStatus = AnalysisPacket(Packet, MODE_SEND);
//getPacketBuffer(Packet, )
//fStatus = FILTER_STATUS_PASS;
if (fStatus == FILTER_STATUS_DROP)
{
return NDIS_STATUS_FAILURE;
}
else if(fStatus == FILTER_STATUS_MODIFY_REDIRECT)
{
// 转发......
// 修改包中的目标地址，和正常发送一样将包向下发送
// TODO.
}
#ifdef NDIS51
//
// Use NDIS 5.1 packet stacking:
//
{
PNDIS_PACKET_STACK pStack;
BOOLEAN Remaining;
//
// Packet stacks: Check if we can use the same packet for sending down.
//
pStack = NdisIMGetCurrentPacketStack(Packet, &Remaining);
if (Remaining)
{
//
// We can reuse "Packet".
//
// NOTE: if we needed to keep per-packet information in packets
// sent down, we can use pStack->IMReserved[].
//
ASSERT(pStack);
//
// If the below miniport is going to low power state, stop sending down any packet.
//
NdisAcquireSpinLock(&pAdapt->Lock);
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
return NDIS_STATUS_FAILURE;
}
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
NdisSend(&Status,
pAdapt->BindingHandle,
Packet);
if (Status != NDIS_STATUS_PENDING)
{
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
return(Status);
}
}
#endif // NDIS51
//
// We are either not using packet stacks, or there isn't stack space
// in the original packet passed down to us. Allocate a new packet
// to wrap the data with.
//
//
// If the below miniport is going to low power state, stop sending down any packet.
//
NdisAcquireSpinLock(&pAdapt->Lock);
if (pAdapt->PTDeviceState > NdisDeviceStateD0)
{
NdisReleaseSpinLock(&pAdapt->Lock);
return NDIS_STATUS_FAILURE;
}
pAdapt->OutstandingSends++;
NdisReleaseSpinLock(&pAdapt->Lock);
NdisAllocatePacket(&Status,
&MyPacket,
pAdapt->SendPacketPoolHandle);
if (Status == NDIS_STATUS_SUCCESS)
{
PSEND_RSVD SendRsvd;
//
// Save a pointer to the original packet in our reserved
// area in the new packet. This is needed so that we can
// get back to the original packet when the new packet's send
// is completed.
//
SendRsvd = (PSEND_RSVD)(MyPacket->ProtocolReserved);
SendRsvd->OriginalPkt = Packet;
NdisGetPacketFlags(MyPacket) = Flags;
//
// Set up the new packet so that it describes the same
// data as the original packet.
//
NDIS_PACKET_FIRST_NDIS_BUFFER(MyPacket) = NDIS_PACKET_FIRST_NDIS_BUFFER(Packet);
NDIS_PACKET_LAST_NDIS_BUFFER(MyPacket) = NDIS_PACKET_LAST_NDIS_BUFFER(Packet);
#ifdef WIN9X
//
// Work around the fact that NDIS does not initialize this
// to FALSE on Win9x.
//
NDIS_PACKET_VALID_COUNTS(MyPacket) = FALSE;
#endif
//
// Copy the OOB Offset from the original packet to the new
// packet.
//
NdisMoveMemory(NDIS_OOB_DATA_FROM_PACKET(MyPacket),
NDIS_OOB_DATA_FROM_PACKET(Packet),
sizeof(NDIS_PACKET_OOB_DATA));
#ifndef WIN9X
//
// Copy the right parts of per packet info into the new packet.
// This API is not available on Win9x since task offload is
// not supported on that platform.
//
NdisIMCopySendPerPacketInfo(MyPacket, Packet);
#endif
//
// Copy the Media specific information
//
NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(Packet,
&MediaSpecificInfo,
&MediaSpecificInfoSize);
if (MediaSpecificInfo || MediaSpecificInfoSize)
{
NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO(MyPacket,
MediaSpecificInfo,
MediaSpecificInfoSize);
}
NdisSend(&Status,
pAdapt->BindingHandle,
MyPacket);
if (Status != NDIS_STATUS_PENDING)
{
#ifndef WIN9X
NdisIMCopySendCompletePerPacketInfo (Packet, MyPacket);
#endif
NdisFreePacket(MyPacket);
ADAPT_DECR_PENDING_SENDS(pAdapt);
}
}
else
{
ADAPT_DECR_PENDING_SENDS(pAdapt);
//
// We are out of packets. Silently drop it. Alternatively we can deal with it:
// - By keeping separate send and receive pools
// - Dynamically allocate more pools as needed and free them when not needed
//
}
return(Status);
}
