#include "nrf_drv_timer.h"
#include "app_error.h"
#include "Boards.h"
#include "et_spi_gpio.h"
#include "et_debug.h"
#include "etMotor.h"
/*****************/
struct ke_timer usr_timer[USR_TIMER_MAX] = {{0,0}};
static unsigned char gTimerTickFlg = 0;
static unsigned short gUsrUsingTimerCount = 0;
/*****************/
#define NRF_Timer2Set 1
#if NRF_Timer2Set
const nrf_drv_timer_t TIMER_GSensor = NRF_DRV_TIMER_INSTANCE(2);
//const nrf_drv_timer_t TIMER_PWM = NRF_DRV_TIMER_INSTANCE(1);
//BOOL Timer2flag=FALSE;
/**
* @brief Handler for timer events.
*/
/*
void timer2_event_handler(nrf_timer_event_t event_type, void* p_context)
{
switch(event_type)
{
case NRF_TIMER_EVENT_COMPARE0:
//gTimerTickFlg = 1;
//#if 0
//if(Timer2flag==FALSE)
#include "nrf_gpiote.h"
#include "nrf_gpio.h"
#include "boards.h"
#include "nrf_drv_ppi.h"
#include "nrf_drv_timer.h"
#include "nrf_drv_gpiote.h"
#include "app_error.h"
#ifdef BSP_LED_0
#define GPIO_OUTPUT_PIN_NUMBER BSP_LED_0 /**< Pin number for output. */
#endif
#ifndef GPIO_OUTPUT_PIN_NUMBER
#error "Please indicate output pin"
#endif
static nrf_drv_timer_t timer = NRF_DRV_TIMER_INSTANCE(0);
void timer_dummy_handler(nrf_timer_event_t event_type, void * p_context){}
static void led_blinking_setup()
{
uint32_t compare_evt_addr;
uint32_t gpiote_task_addr;
nrf_ppi_channel_t ppi_channel;
ret_code_t err_code;
nrf_drv_gpiote_out_config_t config = GPIOTE_CONFIG_OUT_TASK_TOGGLE(false);
err_code = nrf_drv_gpiote_out_init(GPIO_OUTPUT_PIN_NUMBER, &config);
APP_ERROR_CHECK(err_code);
#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS) /**< Connection supervisory timeout (4 seconds), Supervision Timeout uses 10 ms units. */
#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */
#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000, APP_TIMER_PRESCALER) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */
#define MAX_CONN_PARAMS_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */
#define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */
#define UART_TX_BUF_SIZE 512 /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE 64 /**< UART RX buffer size. */
#define ADC_BUFFER_SIZE 6 //Size of buffer for ADC samples. Buffer size should be multiple of number of adc channels located.
#define ADC_SAMPLE_RATE_DIVIDER 0x6000; //This constant and the TIMER2 prescaler value (TIMER2_CONFIG_FREQUENCY) in nrf_drv_config.h file set the ADC sampling frequency
static nrf_adc_value_t adc_buffer[ADC_BUFFER_SIZE]; /**< ADC buffer. */
static nrf_ppi_channel_t m_ppi_channel;
static const nrf_drv_timer_t m_timer = NRF_DRV_TIMER_INSTANCE(2);
static uint8_t adc_event_counter = 0;
static uint8_t number_of_adc_channels;
static ble_nus_t m_nus; /**< Structure to identify the Nordic UART Service. */
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */
static ble_uuid_t m_adv_uuids[] = {{BLE_UUID_NUS_SERVICE, NUS_SERVICE_UUID_TYPE}}; /**< Universally unique service identifier. */
/**@brief Function for assert macro callback.
*
* @details This function will be called in case of an assert in the SoftDevice.
*
* @warning This handler is an example only and does not fit a final product. You need to analyse
* how your product is supposed to react in case of Assert.
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include "nrf_delay.h"
#include "app_uart.h"
#include "app_error.h"
#include "boards.h"
#include "nrf_drv_ppi.h"
#include "nrf_drv_timer.h"
#include "nordic_common.h"
#define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE 1 /**< UART RX buffer size. */
const nrf_drv_timer_t timer0 = NRF_DRV_TIMER_INSTANCE(0);
const nrf_drv_timer_t timer1 = NRF_DRV_TIMER_INSTANCE(1);
const nrf_drv_timer_t timer2 = NRF_DRV_TIMER_INSTANCE(2);
nrf_ppi_channel_t ppi_channel1, ppi_channel2;
void uart_error_handle(app_uart_evt_t * p_event)
{
if (p_event->evt_type == APP_UART_COMMUNICATION_ERROR)
{
APP_ERROR_HANDLER(p_event->data.error_communication);
}
else if (p_event->evt_type == APP_UART_FIFO_ERROR)
{
APP_ERROR_HANDLER(p_event->data.error_code);
}
/**@brief States of simple timer state machine.
*/
typedef enum
{
SIMPLE_TIMER_STATE_IDLE = 0,
SIMPLE_TIMER_STATE_INITIALIZED,
SIMPLE_TIMER_STATE_STOPPED,
SIMPLE_TIMER_STATE_STARTED
}simple_timer_states_t;
static app_simple_timer_mode_t m_mode; /**< Registered timer mode. */
static app_simple_timer_timeout_handler_t m_timeout_handler = NULL; /**< Registered time-out handler. */
static void * mp_timeout_handler_context = NULL; /**< Registered time-out handler context. */
static simple_timer_states_t m_simple_timer_state = SIMPLE_TIMER_STATE_IDLE; /**< State machine state. */
const nrf_drv_timer_t SIMPLE_TIMER = NRF_DRV_TIMER_INSTANCE(SIMPLE_TIMER_CONFIG_INSTANCE);
/**
* @brief Handler for timer events.
*/
static void app_simple_timer_event_handler(nrf_timer_event_t event_type, void * p_context)
{
switch (event_type)
{
case NRF_TIMER_EVENT_COMPARE0:
if (m_mode == APP_SIMPLE_TIMER_MODE_SINGLE_SHOT)
{
m_simple_timer_state = SIMPLE_TIMER_STATE_STOPPED;
}
//@note: No NULL check required as performed in timer_start(...).
*/
/** @file timer_blinky.c (changed by pcbreflux)
* @brief Blinky Example Application main file.
*
*/
#include <stdlib.h>
#include "nrf_delay.h"
#include "nrf_gpio.h"
#include "nrf_drv_clock.h"
#include "nrf_drv_timer.h"
#include "app_error.h"
// see nrf_drv_config.h for defining TIMER1
// Softdevice S110, S120, S130 blocks TIMER0
const nrf_drv_timer_t mytimer1 = NRF_DRV_TIMER_INSTANCE(1); /**< Declaring an instance of nrf_drv_timer for TIMER1. */
const uint32_t led_pin1 = 19;
static uint32_t tick_pos = 0;
/** @brief Function initialization and configuration of GPIO.
*/
static void gpio_config(void) {
// Configure LED-pin as outputs and clear.
nrf_gpio_cfg_output(led_pin1);
nrf_gpio_pin_clear(led_pin1);
}
/** @brief Function for timer events.
*/
static void timer1_handler(nrf_timer_event_t event_type, void* p_context) {
#endif //ADC_PRESENT
#endif //USE_COMP
#if USE_COMP
/* Number of channels required by PPI. */
#define PPI_REQUIRED_CHANNELS 3
/* Array of PPI channels. */
static nrf_ppi_channel_t m_ppi_channels[PPI_REQUIRED_CHANNELS];
/**
* @defgroup timer_instances Timer instances.
* @{
*/
static const nrf_drv_timer_t m_timer0 = NRF_DRV_TIMER_INSTANCE(TIMER0_FOR_CSENSE);
static const nrf_drv_timer_t m_timer1 = NRF_DRV_TIMER_INSTANCE(TIMER1_FOR_CSENSE);
/* @} */
#endif //USE_COMP
/* Configuration of the capacitive sensor module. */
typedef struct
{
volatile nrf_drv_state_t module_state; /**< State of the module. */
nrf_drv_csense_event_handler_t event_handler; /**< Event handler for capacitor sensor events. */
uint16_t analog_values[MAX_ANALOG_INPUTS]; /**< Array containing analog values measured on the corresponding COMP/ADC channel. */
volatile bool busy; /**< Indicates state of module - busy if there are ongoing conversions. */
volatile uint8_t cur_chann_idx; /**< Current channel to be read if enabled. */
volatile uint8_t adc_channels_input_mask; /**< Enabled channels. */
uint8_t output_pin; /**< Pin to generate signal charging capacitors. */
uint8_t channels_to_read; /**< Mask of channels remaining to be read in the current measurement. */
MAX_KERNEL_AWARE_CMSIS_PRI /* keep always last */
};
/* "kernel-aware" interrupts should not overlap the PendSV priority */
Q_ASSERT_COMPILE(MAX_KERNEL_AWARE_CMSIS_PRI <= (0xFF >>(8-__NVIC_PRIO_BITS)));
#ifdef Q_SPY
QSTimeCtr QS_tickTime_;
QSTimeCtr QS_i_getTime;
#endif
uint8_t BSP_readButton() {
#define BTN_PIN 17
return !nrf_gpio_pin_read(BTN_PIN);
}
const nrf_drv_timer_t TIMER1 = NRF_DRV_TIMER_INSTANCE(1);
void Timer1_handler(nrf_timer_event_t event_type, void* p_context) {
if (event_type != NRF_TIMER_EVENT_COMPARE0) return;
//QS_BEGIN(TRACE_SDK_EVT, NULL)
// QS_U8(0, 0);
//QS_END() QS_FLUSH();
#ifdef Q_SPY
QS_tickTime_ += 1000/BSP_TICKS_PER_SEC;
QS_i_getTime = 0;//reset
#endif
QF_tickXISR(0U); /* process time events for rate 0 */
}
static app_simple_timer_mode_t m_mode; /**< Registered timer mode. */
static app_simple_timer_timeout_handler_t m_timeout_handler = NULL; /**< Registered time-out handler. */
static void * mp_timeout_handler_context = NULL; /**< Registered time-out handler context. */
static simple_timer_states_t m_simple_timer_state = SIMPLE_TIMER_STATE_IDLE; /**< State machine state. */
#define APP_SIMPLE_TIMER_INSTANCE 1
#if (APP_SIMPLE_TIMER_INSTANCE == 0)
#if (TIMER_CONFIG_MODE(0) != TIMER_MODE_MODE_Timer)
#error "Unsupported timer mode."
#endif
#if (TIMER_CONFIG_BIT_WIDTH(0) != TIMER_BITMODE_BITMODE_16Bit)
#error "Unsupported timer bit width."
#endif
const nrf_drv_timer_t SIMPLE_TIMER = NRF_DRV_TIMER_INSTANCE(0);
#elif (APP_SIMPLE_TIMER_INSTANCE == 1)
#if (TIMER_CONFIG_MODE(1) != TIMER_MODE_MODE_Timer)
#error "Unsupported timer mode."
#endif
#if (TIMER_CONFIG_BIT_WIDTH(1) != TIMER_BITMODE_BITMODE_16Bit)
#error "Unsupported timer bit width."
#endif
const nrf_drv_timer_t SIMPLE_TIMER = NRF_DRV_TIMER_INSTANCE(1);
#elif (APP_SIMPLE_TIMER_INSTANCE == 2)
#if (TIMER_CONFIG_MODE(2) != TIMER_MODE_MODE_Timer)
#error "Unsupported timer mode."
#endif
#if (TIMER_CONFIG_BIT_WIDTH(2) != TIMER_BITMODE_BITMODE_16Bit)
#error "Unsupported timer bit width."
#endif
