void motor_forwardWithoutEnd(int power)
{
OnFwdSync(OUT_AC,motor_site*power,0);
}
int main()
{
int i;
printf("hello world\n");
printf("start of out_test\n");
Wait(SEC_1);
// initialize
if (!OutputInit())
printf("output init returned false\n");
ResetAllTachoCounts(OUT_ABCD);
// OutputSetType(OUT_A, DEVICE_TYPE_TACHO);
// OutputSetType(OUT_B, DEVICE_TYPE_TACHO);
// OutputSetType(OUT_C, DEVICE_TYPE_MINITACHO);
// OutputSetTypes(DEVICE_TYPE_TACHO, DEVICE_TYPE_TACHO, DEVICE_TYPE_TACHO, DEVICE_TYPE_TACHO);
SetPower(OUT_A, 90);
SetSpeed(OUT_B, 40);
SetPower(OUT_C, 60);
SetPower(OUT_D, -60);
On(OUT_ALL);
bool isBusy = false;
for(i=0; i < 10; i++)
{
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("OUT_C: %d %d %d\n", MotorRotationCount(OUT_C), MotorTachoCount(OUT_C), MotorActualSpeed(OUT_C));
printf("OUT_D: %d %d %d\n", MotorRotationCount(OUT_D), MotorTachoCount(OUT_D), MotorActualSpeed(OUT_D));
Wait(SEC_1);
isBusy = MotorBusy(OUT_ALL);
printf("Any output isBusy = %d\n", (byte)isBusy);
}
// Wait(SEC_5);
printf("Float(OUT_ALL)\n");
Float(OUT_ALL);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("ResetAllTachoCounts(OUT_ALL)\n");
ResetAllTachoCounts(OUT_ALL);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("OUT_C: %d %d %d\n", MotorRotationCount(OUT_C), MotorTachoCount(OUT_C), MotorActualSpeed(OUT_C));
printf("OUT_D: %d %d %d\n", MotorRotationCount(OUT_D), MotorTachoCount(OUT_D), MotorActualSpeed(OUT_D));
printf("Wait(SEC_1)\n");
Wait(SEC_1);
printf("RotateMotorNoWait(OUT_AB, 75, 7200)\n");
RotateMotorNoWait(OUT_AB, 75, 7200);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
isBusy = MotorBusy(OUT_AB);
printf("A or B isBusy = %d\n", (byte)isBusy);
printf("Wait(SEC_20)\n");
Wait(SEC_20);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("resetting all tacho counters\n");
ResetAllTachoCounts(OUT_ALL);
printf("Wait(SEC_1)\n");
Wait(SEC_1);
printf("OnForSync(OUT_AB, SEC_10, 75)\n");
OnForSync(OUT_AB, SEC_10, 75);
for(i=0; i < 10; i++)
{
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
isBusy = MotorBusy(OUT_AB);
printf("A or B isBusy = %d\n", (byte)isBusy);
isBusy = MotorBusy(OUT_CD);
printf("C or D isBusy = %d\n", (byte)isBusy);
Wait(SEC_1);
}
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
// synchronized motor movement without tacho or time limitation
printf("OnFwdSync(OUT_AB, 75)\n");
OnFwdSync(OUT_AB, 75);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("Off(OUT_AB)\n");
Off(OUT_AB); // stop with braking
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("Wait(SEC_1)\n");
Wait(SEC_1);
/*
* Turn ratio is how tight you turn and to what direction you turn
* - 0 value is moving straight forward
* - Negative values turns to the left
* - Positive values turns to the right
* - Value -100 stops the left motor
* - Value +100 stops the right motor
* - Values less than -100 makes the left motor run the opposite
* direction of the right motor (Spin)
* - Values greater than +100 makes the right motor run the opposite
* direction of the left motor (Spin)
*/
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("OnFwdSyncEx(OUT_AB, 75, -20, RESET_NONE)\n");
OnFwdSyncEx(OUT_AB, 75, -20, RESET_NONE);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("OnFwdSync(OUT_AB, 50, -50, RESET_NONE)");
OnFwdSyncEx(OUT_AB, 50, -50, RESET_NONE);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("OnFwdSync(OUT_AB, 20, -100, RESET_NONE)\n");
OnFwdSyncEx(OUT_AB, 20, -100, RESET_NONE);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("OnFwdSync(OUT_AB, 80, -150, RESET_NONE)\n");
OnFwdSyncEx(OUT_AB, 80, -150, RESET_NONE);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("OnFwdSync(OUT_AB, 30, -200, RESET_NONE)\n");
OnFwdSyncEx(OUT_AB, 30, -200, RESET_NONE);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("Off(OUT_AB)\n");
Off(OUT_AB);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
printf("ResetAllTachoCounts(OUT_AB)\n");
ResetAllTachoCounts(OUT_AB);
printf("Wait(SEC_2)\n");
Wait(SEC_2);
printf("OUT_A: %d %d %d\n", MotorRotationCount(OUT_A), MotorTachoCount(OUT_A), MotorActualSpeed(OUT_A));
printf("OUT_B: %d %d %d\n", MotorRotationCount(OUT_B), MotorTachoCount(OUT_B), MotorActualSpeed(OUT_B));
// a blocking version of RotateMotor (function call does not return
// until the motor rotation is complete)
printf("RotateMotor(OUT_AB, 75, 1800)");
RotateMotor(OUT_AB, 75, 1800); // 5 rotations
// by the time the function above returns the motors are no longer busy
isBusy = MotorBusy(OUT_AB);
printf("A or B isBusy = %d\n", isBusy);
// this call starts the motors running Forward without regulation or
// synchronization and the function call does not return until the
// specified amount of time has elapsed.
// at the end of the elapsed time the motors are stopped with braking.
printf("OnFor(OUT_AB, SEC_3)\n");
OnFor(OUT_AB, SEC_3);
printf("Off(OUT_AB)\n");
Off(OUT_AB);
printf("Wait(SEC_5)\n");
Wait(SEC_5);
OutputClose();
OutputExit();
printf("end of out_test\n");
return 0;
}