void Report(struct NaClApp *nap)
{
GString *r = g_string_sized_new(BIG_ENOUGH_STRING);
char *eol = report_mode == 1 ? "; " : "\n";
char *acc = FinalAccounting();
/* report validator state and user return code */
REPORT(r, "%s%d%s", REPORT_VALIDATOR, validation_state, eol);
REPORT(r, "%s%d%s", REPORT_DAEMON, daemon_state, eol);
REPORT(r, "%s%d%s", REPORT_RETCODE, user_code, eol);
/* add memory digest to cumulative digests if asked */
if(nap != NULL && nap->manifest != NULL)
if(nap->manifest->mem_tag != NULL)
ReportTag(STDRAM, GetMemoryDigest(nap));
/* report tags digests and remove ending " " if exist */
REPORT(r, "%s", REPORT_ETAG);
REPORT(r, "%s", digests->len == 0
? TAG_ENGINE_DISABLED : digests->str);
g_string_truncate(r, r->len - 1);
/* report accounting and session message */
if(zvm_state == NULL) zvm_state = UNKNOWN_STATE;
REPORT(r, "%s%s%s%s", eol, REPORT_ACCOUNTING, acc, eol);
REPORT(r, "%s%s%s", REPORT_STATE,
zvm_state == NULL ? UNKNOWN_STATE : zvm_state, eol);
REPORT(r, "%s%s", REPORT_CMD, eol);
OutputReport(r->str);
g_string_free(r, TRUE);
g_free(acc);
}
//第六次扫描：积分并整理
void CSignalProcessDlg::OnSixthScan()
{
m_PeakDraw.ClearLine();
//m_PeakSeak.ConfigArgs_SixthScan(); //(接口)信号处理:最终整理
m_PeakSeak.SP_SixthScan();
m_PeakDraw.SetCPeakSeakData(m_PeakSeak);
m_PeakDraw.SignalDisplay();
m_Peak.clear();
m_PeakSeak.GetPeakResult(m_Peak);
OutputReport();
m_ConfigArgs.clear();
m_ConfigArgs = m_PeakSeak.m_AnalysisConfigArg.GetResultArgument();
//把最终结果配置列表保存到txt文件中去
// CReadSaveArgs ReadSaveArgs;
// ReadSaveArgs.Write2Txt(&m_ConfigArgs);
OutputResultConfigArgs(); //输入最终结果配置列表
GetDlgItem(IDC_SIXTHSCAN)->EnableWindow(FALSE); //第六次按键inactive
CString szMsg;
m_PeakSeak.GetPeakTypeStr(szMsg);
MessageBox(szMsg);
}
void FastReport()
{
char *eol = report_mode == 1 ? "; " : EOL;
static int64_t start = 0;
int64_t now = 0;
struct timeval t;
char *acc = NULL;
char *r = NULL;
/* skip fast report if specified */
if(report_mode != 2) return;
/* check if it is time to report */
gettimeofday(&t, NULL);
now = MICRO_PER_SEC * t.tv_sec + t.tv_usec;
if(now - start < QUANT) return;
start += start == 0 ? now : QUANT;
/* create and output report */
acc = FastAccounting();
r = g_strdup_printf("%s%s%s", REPORT_ACCOUNTING, acc, eol);
OutputReport(r);
g_free(acc);
g_free(r);
}
//第三次扫描：重叠峰处理
void CSignalProcessDlg::OnThirdScan()
{
m_PeakDraw.ClearLine();
//(接口)信号处理:重叠峰处理(垂直分峰，峰谷连线，切线分峰
m_PeakSeak.SP_ThirdScan();
m_PeakDraw.SetCPeakSeakData(m_PeakSeak);
m_PeakDraw.SignalDisplay();
GetDlgItem(IDC_FOURTHSCAN)->EnableWindow(TRUE);
GetDlgItem(IDC_THIRDSCAN)->EnableWindow(FALSE); //第三次按键inactive
m_PeakSeak.GetPeakResult(m_Peak);
OutputReport();
}
//第二次扫描：去除不要的峰
void CSignalProcessDlg::OnSecondScan()
{
m_PeakDraw.ClearLine();
//m_PeakSeak.ConfigArgs_SecondScan(); //(接口)信号处理:去除不要的峰
m_PeakSeak.SP_SecondScan();
m_PeakDraw.SetCPeakSeakData(m_PeakSeak);
m_PeakDraw.SignalDisplay();
m_PeakSeak.GetPeakResult(m_Peak);
OutputReport();
GetDlgItem(IDC_THIRDSCAN)->EnableWindow(TRUE); //第三次按键active
GetDlgItem(IDC_SECONDSCAN)->EnableWindow(FALSE); //第二次扫描按键inactive
}
//第五次扫描：手工调整峰
void CSignalProcessDlg::OnFifthScan()
{
m_PeakDraw.ClearLine();
//m_PeakSeak.ConfigArgs_FourthScan(); //(接口)信号处理:手工调整峰（合并峰、手工分峰、手工基线、手工封顶
m_PeakSeak.SP_FifthScan();
m_PeakDraw.SetCPeakSeakData(m_PeakSeak);
m_PeakDraw.SignalDisplay();
GetDlgItem(IDC_SIXTHSCAN)->EnableWindow(TRUE);
GetDlgItem(IDC_FIFTHSCAN)->EnableWindow(FALSE); //第五次按键inactive
m_PeakSeak.GetPeakResult(m_Peak);
OutputReport();
}
//第4次扫描：基线的校正
void CSignalProcessDlg::OnFourthScan()
{
m_PeakDraw.ClearLine();
//(接口)信号处理:基线校正
m_PeakSeak.SP_FourthScan();
m_PeakSeak.SP_FourthScan(); // 1 more time
m_PeakDraw.SetCPeakSeakData(m_PeakSeak);
m_PeakDraw.SignalDisplay();
GetDlgItem(IDC_FIFTHSCAN)->EnableWindow(TRUE);
GetDlgItem(IDC_FOURTHSCAN)->EnableWindow(FALSE); //第四次按键inactive
m_PeakSeak.GetPeakResult(m_Peak);
OutputReport();
}
