FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString,
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() )
{
m_showBorderAndTitleBlock = false; // true to show the frame references
m_showAxis = true; // true to show X and Y axis on screen
m_showGridAxis = true; // show the grid origin axis
m_hotkeysDescrList = g_Module_Editor_Hokeys_Descr;
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) );
SetIcon( icon );
// Show a title (frame title + footprint name):
updateTitle();
// Create GAL canvas
PCB_BASE_FRAME* parentFrame = static_cast<PCB_BASE_FRAME*>( Kiway().Player( FRAME_PCB, true ) );
PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
parentFrame->GetGalCanvas()->GetBackend() );
SetGalCanvas( drawPanel );
SetBoard( new BOARD() );
// In modedit, the default net clearance is not known.
// (it depends on the actual board)
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0);
// restore the last footprint from the project, if any
restoreLastFootprint();
// Ensure all layers and items are visible:
// In footprint editor, some layers have no meaning or
// cannot be used, but we show all of them, at least to be able
// to edit a bad layer
GetBoard()->SetVisibleAlls();
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), font.GetPointSize(), true );
LoadSettings( config() );
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
GetScreen()->SetCurItem( NULL );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// In modedit, set the default paper size to A4:
// this should be OK for all footprint to plot/print
SetPageSettings( PAGE_INFO( PAGE_INFO::A4 ) );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg_pane;
mesg_pane.MessageToolbarPane();
// Create a wxAuiPaneInfo for the Layers Manager, not derived from the template.
// LAYER_WIDGET is floatable, but initially docked at far right
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget
lyrs.BestSize( m_Layers->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) );
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
// The main right vertical toolbar
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer(1) );
// Add the layer manager ( most right side of pcbframe )
m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 2 ) );
// Layers manager is visible
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( true );
// The left vertical toolbar (fast acces to display options)
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left().Layer(1) );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
// Create the manager and dispatcher & route draw panel events to the dispatcher
setupTools();
UseGalCanvas( parentFrame->IsGalCanvasActive() );
if( m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).IsShown() )
{
m_Layers->ReFill();
m_Layers->ReFillRender();
GetScreen()->m_Active_Layer = F_SilkS;
m_Layers->SelectLayer( F_SilkS );
m_Layers->OnLayerSelected();
}
m_auimgr.Update();
Raise(); // On some window managers, this is needed
Show( true );
Zoom_Automatique( false );
}
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent,
EDA_DRAW_PANEL_GAL::GAL_TYPE aBackend ) :
PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString,
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() )
{
m_showBorderAndTitleBlock = false; // true to show the frame references
m_showAxis = true; // true to show X and Y axis on screen
m_showGridAxis = true; // show the grid origin axis
m_hotkeysDescrList = g_Module_Editor_Hotkeys_Descr;
m_FrameSize = ConvertDialogToPixels( wxSize( 500, 350 ) ); // default in case of no prefs
m_canvasType = aBackend;
m_AboutTitle = "ModEdit";
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) );
SetIcon( icon );
// Create GAL canvas
if( aBackend == EDA_DRAW_PANEL_GAL::GAL_TYPE_UNKNOWN )
m_canvasType = LoadCanvasTypeSetting();
else
m_canvasType = aBackend;
PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
GetGalDisplayOptions(), m_canvasType );
SetGalCanvas( drawPanel );
SetBoard( new BOARD() );
// In modedit, the default net clearance is not known.
// (it depends on the actual board)
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance( 0 );
// Don't show the default board solder mask clearance in the footprint editor. Only the
// footprint or pad clearance setting should be shown if it is not 0.
GetBoard()->GetDesignSettings().m_SolderMaskMargin = 0;
// restore the last footprint from the project, if any
restoreLastFootprint();
// Ensure all layers and items are visible:
// In footprint editor, some layers have no meaning or
// cannot be used, but we show all of them, at least to be able
// to edit a bad layer
GetBoard()->SetVisibleAlls();
// However the "no net" mark on pads is useless, because there is
// no net in footprint editor: make it non visible
GetBoard()->SetElementVisibility( LAYER_NO_CONNECTS, false );
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), true );
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings( config() );
GetGalDisplayOptions().m_axesEnabled = true;
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
GetScreen()->AddGrid( m_UserGridSize, EDA_UNITS_T::UNSCALED_UNITS, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// In modedit, set the default paper size to A4:
// this should be OK for all footprint to plot/print
SetPageSettings( PAGE_INFO( PAGE_INFO::A4 ) );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
initLibraryTree();
m_treePane = new FOOTPRINT_TREE_PANE( this );
// Create the manager and dispatcher & route draw panel events to the dispatcher
setupTools();
// ReCreateMenuBar(); // UseGalCanvas() will do this for us.
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
m_Layers->ReFill();
m_Layers->ReFillRender();
GetScreen()->m_Active_Layer = F_SilkS;
m_Layers->SelectLayer( F_SilkS );
m_Layers->OnLayerSelected();
m_auimgr.SetManagedWindow( this );
m_auimgr.SetArtProvider( new EDA_DOCKART( this ) );
// Horizontal items; layers 4 - 6
m_auimgr.AddPane( m_mainToolBar, EDA_PANE().HToolbar().Name( "MainToolbar" ).Top().Layer(6) );
m_auimgr.AddPane( m_messagePanel, EDA_PANE().Messages().Name( "MsgPanel" ).Bottom().Layer(6) );
// Vertical items; layers 1 - 3
m_auimgr.AddPane( m_optionsToolBar, EDA_PANE().VToolbar().Name( "OptToolbar" ).Left().Layer(3) );
m_auimgr.AddPane( m_treePane, EDA_PANE().Palette().Name( "Footprints" ).Left().Layer(1)
.Caption( _( "Libraries" ) ).MinSize( 250, 400 )
.BestSize( m_defaultLibWidth, -1 ) );
m_auimgr.AddPane( m_drawToolBar, EDA_PANE().VToolbar().Name( "ToolsToolbar" ).Right().Layer(1) );
m_auimgr.AddPane( m_Layers, EDA_PANE().Palette().Name( "LayersManager" ).Right().Layer(3)
.Caption( _( "Layers Manager" ) ).PaneBorder( false )
.MinSize( 80, -1 ).BestSize( m_Layers->GetBestSize() ) );
m_auimgr.AddPane( m_canvas, EDA_PANE().Canvas().Name( "DrawFrame" ).Center() );
m_auimgr.AddPane( GetGalCanvas(), EDA_PANE().Canvas().Name( "DrawFrameGal" ).Center().Hide() );
GetGalCanvas()->GetGAL()->SetAxesEnabled( true );
// Set up viewport
KIGFX::VIEW* view = GetGalCanvas()->GetView();
view->SetScale( GetZoomLevelCoeff() / m_canvas->GetZoom() );
view->SetCenter( VECTOR2D( m_canvas->GetScreenCenterLogicalPosition() ) );
UseGalCanvas();
m_auimgr.Update();
updateTitle();
Raise(); // On some window managers, this is needed
Show( true );
Zoom_Automatique( false );
}
