static int
pci_device_freebsd_probe( struct pci_device * dev )
{
struct pci_device_private *priv = (struct pci_device_private *) dev;
struct pci_bar_io bar;
uint8_t irq;
int err, i;
#if HAVE_PCI_IO_PC_DOMAIN
bar.pbi_sel.pc_domain = dev->domain;
#endif
bar.pbi_sel.pc_bus = dev->bus;
bar.pbi_sel.pc_dev = dev->dev;
bar.pbi_sel.pc_func = dev->func;
/* Many of the fields were filled in during initial device enumeration.
* At this point, we need to fill in regions, rom_size, and irq.
*/
err = pci_device_cfg_read_u8( dev, &irq, 60 );
if (err)
return errno;
dev->irq = irq;
for (i = 0; i < pci_device_freebsd_get_num_regions( dev ); i++) {
bar.pbi_reg = PCIR_BAR(i);
if ( ioctl( freebsd_pci_sys->pcidev, PCIOCGETBAR, &bar ) < 0 )
continue;
if (PCI_BAR_IO(bar.pbi_base))
dev->regions[i].is_IO = 1;
if ((bar.pbi_base & PCIM_BAR_MEM_TYPE) == PCIM_BAR_MEM_64)
dev->regions[i].is_64 = 1;
if (bar.pbi_base & PCIM_BAR_MEM_PREFETCH)
dev->regions[i].is_prefetchable = 1;
dev->regions[i].base_addr = bar.pbi_base & ~((uint64_t)0xf);
dev->regions[i].size = bar.pbi_length;
}
/* If it's a VGA device, set up the rom size for read_rom using the
* 0xc0000 mapping.
*/
if ((dev->device_class & 0x00ffff00) ==
((PCIC_DISPLAY << 16) | (PCIS_DISPLAY_VGA << 8))) {
dev->rom_size = 64 * 1024;
}
return 0;
}
static int
ipmi2_pci_attach(device_t dev)
{
struct ipmi_softc *sc;
int error, iface, type;
sc = device_get_softc(dev);
sc->ipmi_dev = dev;
/* Interface is determined by progif. */
switch (pci_get_progif(dev)) {
case PCIP_SERIALBUS_IPMI_SMIC:
iface = SMIC_MODE;
break;
case PCIP_SERIALBUS_IPMI_KCS:
iface = KCS_MODE;
break;
case PCIP_SERIALBUS_IPMI_BT:
iface = BT_MODE;
device_printf(dev, "BT interface unsupported\n");
return (ENXIO);
default:
device_printf(dev, "Unsupported interface: %d\n",
pci_get_progif(dev));
return (ENXIO);
}
/* Check the BAR to determine our resource type. */
sc->ipmi_io_rid = PCIR_BAR(0);
if (PCI_BAR_IO(pci_read_config(dev, PCIR_BAR(0), 4)))
type = SYS_RES_IOPORT;
else
type = SYS_RES_MEMORY;
sc->ipmi_io_type = type;
sc->ipmi_io_spacing = 1;
sc->ipmi_io_res[0] = bus_alloc_resource_any(dev, type,
&sc->ipmi_io_rid, RF_ACTIVE);
if (sc->ipmi_io_res[0] == NULL) {
device_printf(dev, "couldn't map ports/memory\n");
return (ENXIO);
}
sc->ipmi_irq_rid = 0;
sc->ipmi_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->ipmi_irq_rid, RF_SHAREABLE | RF_ACTIVE);
switch (iface) {
case KCS_MODE:
device_printf(dev, "using KSC interface\n");
/*
* We have to examine the resource directly to determine the
* alignment.
*/
if (!ipmi_kcs_probe_align(sc)) {
device_printf(dev, "Unable to determine alignment\n");
error = ENXIO;
goto bad;
}
error = ipmi_kcs_attach(sc);
if (error)
goto bad;
break;
case SMIC_MODE:
device_printf(dev, "using SMIC interface\n");
error = ipmi_smic_attach(sc);
if (error)
goto bad;
break;
}
error = ipmi_attach(dev);
if (error)
goto bad;
return (0);
bad:
ipmi_release_resources(dev);
return (error);
}
static int
mpt_pci_attach(device_t dev)
{
struct mpt_softc *mpt;
int iqd;
uint32_t data, cmd;
int mpt_io_bar, mpt_mem_bar;
mpt = (struct mpt_softc*)device_get_softc(dev);
switch (pci_get_device(dev)) {
case MPI_MANUFACTPAGE_DEVICEID_FC909_FB:
case MPI_MANUFACTPAGE_DEVICEID_FC909:
case MPI_MANUFACTPAGE_DEVICEID_FC919:
case MPI_MANUFACTPAGE_DEVICEID_FC919_LAN_FB:
case MPI_MANUFACTPAGE_DEVICEID_FC929:
case MPI_MANUFACTPAGE_DEVICEID_FC929_LAN_FB:
case MPI_MANUFACTPAGE_DEVICEID_FC929X:
case MPI_MANUFACTPAGE_DEVICEID_FC929X_LAN_FB:
case MPI_MANUFACTPAGE_DEVICEID_FC919X:
case MPI_MANUFACTPAGE_DEVICEID_FC919X_LAN_FB:
case MPI_MANUFACTPAGE_DEVICEID_FC949E:
case MPI_MANUFACTPAGE_DEVICEID_FC949X:
mpt->is_fc = 1;
break;
case MPI_MANUFACTPAGE_DEVID_SAS1078:
case MPI_MANUFACTPAGE_DEVID_SAS1078DE_FB:
mpt->is_1078 = 1;
/* FALLTHROUGH */
case MPI_MANUFACTPAGE_DEVID_SAS1064:
case MPI_MANUFACTPAGE_DEVID_SAS1064A:
case MPI_MANUFACTPAGE_DEVID_SAS1064E:
case MPI_MANUFACTPAGE_DEVID_SAS1066:
case MPI_MANUFACTPAGE_DEVID_SAS1066E:
case MPI_MANUFACTPAGE_DEVID_SAS1068:
case MPI_MANUFACTPAGE_DEVID_SAS1068A_FB:
case MPI_MANUFACTPAGE_DEVID_SAS1068E:
case MPI_MANUFACTPAGE_DEVID_SAS1068E_FB:
mpt->is_sas = 1;
break;
default:
mpt->is_spi = 1;
break;
}
mpt->dev = dev;
mpt->unit = device_get_unit(dev);
mpt->raid_resync_rate = MPT_RAID_RESYNC_RATE_DEFAULT;
mpt->raid_mwce_setting = MPT_RAID_MWCE_DEFAULT;
mpt->raid_queue_depth = MPT_RAID_QUEUE_DEPTH_DEFAULT;
mpt->verbose = MPT_PRT_NONE;
mpt->role = MPT_ROLE_NONE;
mpt->mpt_ini_id = MPT_INI_ID_NONE;
#ifdef __sparc64__
if (mpt->is_spi)
mpt->mpt_ini_id = OF_getscsinitid(dev);
#endif
mpt_set_options(mpt);
if (mpt->verbose == MPT_PRT_NONE) {
mpt->verbose = MPT_PRT_WARN;
/* Print INFO level (if any) if bootverbose is set */
mpt->verbose += (bootverbose != 0)? 1 : 0;
}
/* Make sure memory access decoders are enabled */
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
if ((cmd & PCIM_CMD_MEMEN) == 0) {
device_printf(dev, "Memory accesses disabled");
return (ENXIO);
}
/*
* Make sure that SERR, PERR, WRITE INVALIDATE and BUSMASTER are set.
*/
cmd |=
PCIM_CMD_SERRESPEN | PCIM_CMD_PERRESPEN |
PCIM_CMD_BUSMASTEREN | PCIM_CMD_MWRICEN;
pci_write_config(dev, PCIR_COMMAND, cmd, 2);
/*
* Make sure we've disabled the ROM.
*/
data = pci_read_config(dev, PCIR_BIOS, 4);
data &= ~PCIM_BIOS_ENABLE;
pci_write_config(dev, PCIR_BIOS, data, 4);
/*
* Is this part a dual?
* If so, link with our partner (around yet)
*/
switch (pci_get_device(dev)) {
case MPI_MANUFACTPAGE_DEVICEID_FC929:
case MPI_MANUFACTPAGE_DEVICEID_FC929_LAN_FB:
case MPI_MANUFACTPAGE_DEVICEID_FC949E:
case MPI_MANUFACTPAGE_DEVICEID_FC949X:
case MPI_MANUFACTPAGE_DEVID_53C1030:
case MPI_MANUFACTPAGE_DEVID_53C1030ZC:
mpt_link_peer(mpt);
break;
default:
break;
}
/*
* Figure out which are the I/O and MEM Bars
*/
data = pci_read_config(dev, PCIR_BAR(0), 4);
if (PCI_BAR_IO(data)) {
/* BAR0 is IO, BAR1 is memory */
mpt_io_bar = 0;
mpt_mem_bar = 1;
} else {
/* BAR0 is memory, BAR1 is IO */
mpt_mem_bar = 0;
mpt_io_bar = 1;
}
/*
* Set up register access. PIO mode is required for
* certain reset operations (but must be disabled for
* some cards otherwise).
*/
mpt_io_bar = PCIR_BAR(mpt_io_bar);
mpt->pci_pio_reg = bus_alloc_resource_any(dev, SYS_RES_IOPORT,
&mpt_io_bar, RF_ACTIVE);
if (mpt->pci_pio_reg == NULL) {
if (bootverbose) {
device_printf(dev,
"unable to map registers in PIO mode\n");
}
} else {
mpt->pci_pio_st = rman_get_bustag(mpt->pci_pio_reg);
mpt->pci_pio_sh = rman_get_bushandle(mpt->pci_pio_reg);
}
mpt_mem_bar = PCIR_BAR(mpt_mem_bar);
mpt->pci_reg = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&mpt_mem_bar, RF_ACTIVE);
if (mpt->pci_reg == NULL) {
if (bootverbose || mpt->is_sas || mpt->pci_pio_reg == NULL) {
device_printf(dev,
"Unable to memory map registers.\n");
}
if (mpt->is_sas || mpt->pci_pio_reg == NULL) {
device_printf(dev, "Giving Up.\n");
goto bad;
}
if (bootverbose) {
device_printf(dev, "Falling back to PIO mode.\n");
}
mpt->pci_st = mpt->pci_pio_st;
mpt->pci_sh = mpt->pci_pio_sh;
} else {
mpt->pci_st = rman_get_bustag(mpt->pci_reg);
mpt->pci_sh = rman_get_bushandle(mpt->pci_reg);
}
/* Get a handle to the interrupt */
iqd = 0;
if (mpt->msi_enable) {
/*
* First try to alloc an MSI-X message. If that
* fails, then try to alloc an MSI message instead.
*/
if (pci_msix_count(dev) == 1) {
mpt->pci_msi_count = 1;
if (pci_alloc_msix(dev, &mpt->pci_msi_count) == 0) {
iqd = 1;
} else {
mpt->pci_msi_count = 0;
}
}
if (iqd == 0 && pci_msi_count(dev) == 1) {
mpt->pci_msi_count = 1;
if (pci_alloc_msi(dev, &mpt->pci_msi_count) == 0) {
iqd = 1;
} else {
mpt->pci_msi_count = 0;
}
}
}
mpt->pci_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &iqd,
RF_ACTIVE | (mpt->pci_msi_count ? 0 : RF_SHAREABLE));
if (mpt->pci_irq == NULL) {
device_printf(dev, "could not allocate interrupt\n");
goto bad;
}
MPT_LOCK_SETUP(mpt);
/* Disable interrupts at the part */
mpt_disable_ints(mpt);
/* Register the interrupt handler */
if (mpt_setup_intr(dev, mpt->pci_irq, MPT_IFLAGS, NULL, mpt_pci_intr,
mpt, &mpt->ih)) {
device_printf(dev, "could not setup interrupt\n");
goto bad;
}
/* Allocate dma memory */
if (mpt_dma_mem_alloc(mpt)) {
mpt_prt(mpt, "Could not allocate DMA memory\n");
goto bad;
}
#if 0
/*
* Save the PCI config register values
*
* Hard resets are known to screw up the BAR for diagnostic
* memory accesses (Mem1).
*
* Using Mem1 is known to make the chip stop responding to
* configuration space transfers, so we need to save it now
*/
mpt_read_config_regs(mpt);
#endif
/*
* Disable PIO until we need it
*/
if (mpt->is_sas) {
pci_disable_io(dev, SYS_RES_IOPORT);
}
/* Initialize the hardware */
if (mpt->disabled == 0) {
if (mpt_attach(mpt) != 0) {
goto bad;
}
} else {
mpt_prt(mpt, "device disabled at user request\n");
goto bad;
}
mpt->eh = EVENTHANDLER_REGISTER(shutdown_post_sync, mpt_pci_shutdown,
dev, SHUTDOWN_PRI_DEFAULT);
if (mpt->eh == NULL) {
mpt_prt(mpt, "shutdown event registration failed\n");
(void) mpt_detach(mpt);
goto bad;
}
return (0);
bad:
mpt_dma_mem_free(mpt);
mpt_free_bus_resources(mpt);
mpt_unlink_peer(mpt);
MPT_LOCK_DESTROY(mpt);
/*
* but return zero to preserve unit numbering
*/
return (0);
}
static int
cfginitbar(struct vmctx *ctx, struct passthru_softc *sc)
{
int i, error;
struct pci_devinst *pi;
struct pci_bar_io bar;
enum pcibar_type bartype;
uint64_t base, size;
pi = sc->psc_pi;
/*
* Initialize BAR registers
*/
for (i = 0; i <= PCI_BARMAX; i++) {
bzero(&bar, sizeof(bar));
bar.pbi_sel = sc->psc_sel;
bar.pbi_reg = PCIR_BAR(i);
if (ioctl(pcifd, PCIOCGETBAR, &bar) < 0)
continue;
if (PCI_BAR_IO(bar.pbi_base)) {
bartype = PCIBAR_IO;
base = bar.pbi_base & PCIM_BAR_IO_BASE;
} else {
switch (bar.pbi_base & PCIM_BAR_MEM_TYPE) {
case PCIM_BAR_MEM_64:
bartype = PCIBAR_MEM64;
break;
default:
bartype = PCIBAR_MEM32;
break;
}
base = bar.pbi_base & PCIM_BAR_MEM_BASE;
}
size = bar.pbi_length;
if (bartype != PCIBAR_IO) {
if (((base | size) & PAGE_MASK) != 0) {
printf("passthru device %d/%d/%d BAR %d: "
"base %#lx or size %#lx not page aligned\n",
sc->psc_sel.pc_bus, sc->psc_sel.pc_dev,
sc->psc_sel.pc_func, i, base, size);
return (-1);
}
}
/* Cache information about the "real" BAR */
sc->psc_bar[i].type = bartype;
sc->psc_bar[i].size = size;
sc->psc_bar[i].addr = base;
/* Allocate the BAR in the guest I/O or MMIO space */
error = pci_emul_alloc_pbar(pi, i, base, bartype, size);
if (error)
return (-1);
/* The MSI-X table needs special handling */
if (i == pci_msix_table_bar(pi)) {
error = init_msix_table(ctx, sc, base);
if (error)
return (-1);
} else if (bartype != PCIBAR_IO) {
/* Map the physical BAR in the guest MMIO space */
error = vm_map_pptdev_mmio(ctx, sc->psc_sel.pc_bus,
sc->psc_sel.pc_dev, sc->psc_sel.pc_func,
pi->pi_bar[i].addr, pi->pi_bar[i].size, base);
if (error)
return (-1);
}
/*
* 64-bit BAR takes up two slots so skip the next one.
*/
if (bartype == PCIBAR_MEM64) {
i++;
assert(i <= PCI_BARMAX);
sc->psc_bar[i].type = PCIBAR_MEMHI64;
}
}
return (0);
}
