示例#1
0
/*
 * Optionally prune and repair fragmentation in the specified page.
 *
 * This is an opportunistic function.  It will perform housekeeping
 * only if the page heuristically looks like a candidate for pruning and we
 * can acquire buffer cleanup lock without blocking.
 *
 * Note: this is called quite often.  It's important that it fall out quickly
 * if there's not any use in pruning.
 *
 * Caller must have pin on the buffer, and must *not* have a lock on it.
 *
 * OldestXmin is the cutoff XID used to distinguish whether tuples are DEAD
 * or RECENTLY_DEAD (see HeapTupleSatisfiesVacuum).
 */
void
heap_page_prune_opt(Relation relation, Buffer buffer, TransactionId OldestXmin)
{
	Page		page = BufferGetPage(buffer);
	Size		minfree;

	/*
	 * Let's see if we really need pruning.
	 *
	 * Forget it if page is not hinted to contain something prunable that's
	 * older than OldestXmin.
	 */
	if (!PageIsPrunable(page, OldestXmin))
		return;

	/*
	 * We can't write WAL in recovery mode, so there's no point trying to
	 * clean the page. The master will likely issue a cleaning WAL record soon
	 * anyway, so this is no particular loss.
	 */
	if (RecoveryInProgress())
		return;

	/*
	 * We prune when a previous UPDATE failed to find enough space on the page
	 * for a new tuple version, or when free space falls below the relation's
	 * fill-factor target (but not less than 10%).
	 *
	 * Checking free space here is questionable since we aren't holding any
	 * lock on the buffer; in the worst case we could get a bogus answer. It's
	 * unlikely to be *seriously* wrong, though, since reading either pd_lower
	 * or pd_upper is probably atomic.	Avoiding taking a lock seems more
	 * important than sometimes getting a wrong answer in what is after all
	 * just a heuristic estimate.
	 */
	minfree = RelationGetTargetPageFreeSpace(relation,
											 HEAP_DEFAULT_FILLFACTOR);
	minfree = Max(minfree, BLCKSZ / 10);

	if (PageIsFull(page) || PageGetHeapFreeSpace(page) < minfree)
	{
		/* OK, try to get exclusive buffer lock */
		if (!ConditionalLockBufferForCleanup(buffer))
			return;

		/*
		 * Now that we have buffer lock, get accurate information about the
		 * page's free space, and recheck the heuristic about whether to
		 * prune. (We needn't recheck PageIsPrunable, since no one else could
		 * have pruned while we hold pin.)
		 */
		if (PageIsFull(page) || PageGetHeapFreeSpace(page) < minfree)
		{
			TransactionId ignore = InvalidTransactionId;		/* return value not
																 * needed */

			/* OK to prune */
			(void) heap_page_prune(relation, buffer, OldestXmin, true, &ignore);
		}

		/* And release buffer lock */
		LockBuffer(buffer, BUFFER_LOCK_UNLOCK);
	}
}
示例#2
0
/*
 * Optionally prune and repair fragmentation in the specified page.
 *
 * This is an opportunistic function.  It will perform housekeeping
 * only if the page heuristically looks like a candidate for pruning and we
 * can acquire buffer cleanup lock without blocking.
 *
 * Note: this is called quite often.  It's important that it fall out quickly
 * if there's not any use in pruning.
 *
 * Caller must have pin on the buffer, and must *not* have a lock on it.
 *
 * OldestXmin is the cutoff XID used to distinguish whether tuples are DEAD
 * or RECENTLY_DEAD (see HeapTupleSatisfiesVacuum).
 */
void
heap_page_prune_opt(Relation relation, Buffer buffer, TransactionId OldestXmin)
{
	Page		page = BufferGetPage(buffer);
	Size		minfree;

	/*
	 * In GPDB we may call into here without having a local snapshot and thus
	 * no valid OldestXmin transaction id. Exit early if so.
	 */
	if (!TransactionIdIsValid(OldestXmin))
		return;

	/*
	 * Let's see if we really need pruning.
	 *
	 * Forget it if page is not hinted to contain something prunable that's
	 * older than OldestXmin.
	 */
	if (!PageIsPrunable(page, OldestXmin))
		return;

	/*
	 * We prune when a previous UPDATE failed to find enough space on the page
	 * for a new tuple version, or when free space falls below the relation's
	 * fill-factor target (but not less than 10%).
	 *
	 * Checking free space here is questionable since we aren't holding any
	 * lock on the buffer; in the worst case we could get a bogus answer. It's
	 * unlikely to be *seriously* wrong, though, since reading either pd_lower
	 * or pd_upper is probably atomic.	Avoiding taking a lock seems more
	 * important than sometimes getting a wrong answer in what is after all
	 * just a heuristic estimate.
	 */
	minfree = RelationGetTargetPageFreeSpace(relation,
											 HEAP_DEFAULT_FILLFACTOR);
	minfree = Max(minfree, BLCKSZ / 10);

	if (PageIsFull(page) || PageGetHeapFreeSpace(page) < minfree)
	{
		/*
		 * Check if we have gp_persistent_relation_node information, to be
		 * added to the XLOG record. As in some cases it maybe too late to
		 * fetch the same and hence for such cases just give-up.
		 */
		if (!RelationAllowedToGenerateXLogRecord(relation))
			return;

		/* OK, try to get exclusive buffer lock */
		if (!ConditionalLockBufferForCleanup(buffer))
			return;

		/*
		 * Now that we have buffer lock, get accurate information about the
		 * page's free space, and recheck the heuristic about whether to
		 * prune. (We needn't recheck PageIsPrunable, since no one else could
		 * have pruned while we hold pin.)
		 */
		if (PageIsFull(page) || PageGetHeapFreeSpace(page) < minfree)
		{
			/* OK to prune (though not to remove redirects) */
			(void) heap_page_prune(relation, buffer, OldestXmin, false, true);
		}

		/* And release buffer lock */
		LockBuffer(buffer, BUFFER_LOCK_UNLOCK);
	}
}
示例#3
0
/*
 * Optionally prune and repair fragmentation in the specified page.
 *
 * This is an opportunistic function.  It will perform housekeeping
 * only if the page heuristically looks like a candidate for pruning and we
 * can acquire buffer cleanup lock without blocking.
 *
 * Note: this is called quite often.  It's important that it fall out quickly
 * if there's not any use in pruning.
 *
 * Caller must have pin on the buffer, and must *not* have a lock on it.
 *
 * OldestXmin is the cutoff XID used to distinguish whether tuples are DEAD
 * or RECENTLY_DEAD (see HeapTupleSatisfiesVacuum).
 */
void
heap_page_prune_opt(Relation relation, Buffer buffer)
{
	Page		page = BufferGetPage(buffer);
	Size		minfree;
	TransactionId OldestXmin;

	/*
	 * We can't write WAL in recovery mode, so there's no point trying to
	 * clean the page. The master will likely issue a cleaning WAL record soon
	 * anyway, so this is no particular loss.
	 */
	if (RecoveryInProgress())
		return;

	/*
	 * Use the appropriate xmin horizon for this relation. If it's a proper
	 * catalog relation or a user defined, additional, catalog relation, we
	 * need to use the horizon that includes slots, otherwise the data-only
	 * horizon can be used. Note that the toast relation of user defined
	 * relations are *not* considered catalog relations.
	 *
	 * It is OK to apply the old snapshot limit before acquiring the cleanup
	 * lock because the worst that can happen is that we are not quite as
	 * aggressive about the cleanup (by however many transaction IDs are
	 * consumed between this point and acquiring the lock).  This allows us to
	 * save significant overhead in the case where the page is found not to be
	 * prunable.
	 */
	if (IsCatalogRelation(relation) ||
		RelationIsAccessibleInLogicalDecoding(relation))
		OldestXmin = RecentGlobalXmin;
	else
		OldestXmin =
				TransactionIdLimitedForOldSnapshots(RecentGlobalDataXmin,
													relation);

	Assert(TransactionIdIsValid(OldestXmin));

	/*
	 * Let's see if we really need pruning.
	 *
	 * Forget it if page is not hinted to contain something prunable that's
	 * older than OldestXmin.
	 */
	if (!PageIsPrunable(page, OldestXmin))
		return;

	/*
	 * We prune when a previous UPDATE failed to find enough space on the page
	 * for a new tuple version, or when free space falls below the relation's
	 * fill-factor target (but not less than 10%).
	 *
	 * Checking free space here is questionable since we aren't holding any
	 * lock on the buffer; in the worst case we could get a bogus answer. It's
	 * unlikely to be *seriously* wrong, though, since reading either pd_lower
	 * or pd_upper is probably atomic.  Avoiding taking a lock seems more
	 * important than sometimes getting a wrong answer in what is after all
	 * just a heuristic estimate.
	 */
	minfree = RelationGetTargetPageFreeSpace(relation,
											 HEAP_DEFAULT_FILLFACTOR);
	minfree = Max(minfree, BLCKSZ / 10);

	if (PageIsFull(page) || PageGetHeapFreeSpace(page) < minfree)
	{
		/* OK, try to get exclusive buffer lock */
		if (!ConditionalLockBufferForCleanup(buffer))
			return;

		/*
		 * Now that we have buffer lock, get accurate information about the
		 * page's free space, and recheck the heuristic about whether to
		 * prune. (We needn't recheck PageIsPrunable, since no one else could
		 * have pruned while we hold pin.)
		 */
		if (PageIsFull(page) || PageGetHeapFreeSpace(page) < minfree)
		{
			TransactionId ignore = InvalidTransactionId;		/* return value not
																 * needed */

			/* OK to prune */
			(void) heap_page_prune(relation, buffer, OldestXmin, true, &ignore);
		}

		/* And release buffer lock */
		LockBuffer(buffer, BUFFER_LOCK_UNLOCK);
	}
}