示例#1
0
文件: features.c 项目: arcanex/ioio-1
void SetPinAnalogIn(int pin) {
  log_printf("SetPinAnalogIn(%d)", pin);
  SAVE_PIN_FOR_LOG(pin);
  PinSetRpor(pin, 0);
  PinSetCnen(pin, 0);
  PinSetCnpu(pin, 0);
  PinSetCnpd(pin, 0);
  PinSetAnsel(pin, 1);
  PinSetTris(pin, 1);
}
示例#2
0
void SetPinAnalogIn(int pin) {
  log_printf("SetPinAnalogIn(%d)", pin);
  SAVE_PIN_FOR_LOG(pin);
  PinSetRpor(pin, 0);
  PinSetCnen(pin, 0);
  PinSetCnpu(pin, 0);
  PinSetCnpd(pin, 0);
  PinSetAnsel(pin, 1);
  PinSetTris(pin, 1);
  ADCSetScan(pin, 0); //ANDROID THERMOSTAT MOD
}
示例#3
0
文件: features.c 项目: sefgit/ioio
void SetPinDigitalOut(int pin, int value, int open_drain) {
  log_printf("SetPinDigitalOut(%d, %d, %d)", pin, value, open_drain);
  SAVE_PIN_FOR_LOG(pin);
  ADCSetScan(pin, 0);
  PinSetAnsel(pin, 0);
  PinSetRpor(pin, 0);
  PinSetCnen(pin, 0);
  PinSetCnpu(pin, 0);
  PinSetCnpd(pin, 0);
  PinSetLat(pin, value);
  PinSetOdc(pin, open_drain);
  PinSetTris(pin, 0);
}
示例#4
0
文件: features.c 项目: arcanex/ioio-1
void SetPinCapSense(int pin) {
  log_printf("SetPinCapSense(%d)", pin);
  SAVE_PIN_FOR_LOG(pin);

  // In cap-sense mode, the pin is configured for analog input, but initially
  // pulling low in order to discharge, the circuit.
  PinSetRpor(pin, 0);
  PinSetCnen(pin, 0);
  PinSetCnpu(pin, 0);
  PinSetCnpd(pin, 0);
  PinSetAnsel(pin, 1);
  PinSetLat(pin, 0);
  PinSetTris(pin, 1);
}
示例#5
0
文件: features.c 项目: arcanex/ioio-1
void SetPinDigitalOut(int pin, int value, int open_drain) {
  log_printf("SetPinDigitalOut(%d, %d, %d)", pin, value, open_drain);
  SAVE_PIN_FOR_LOG(pin);
  // Protect from the user trying to use push-pull, later pulling low using the
  // bootloader pin.
  if (pin == 0) open_drain = 1;
  PinSetAnsel(pin, 0);
  PinSetRpor(pin, 0);
  PinSetCnen(pin, 0);
  PinSetCnpu(pin, 0);
  PinSetCnpd(pin, 0);
  PinSetLat(pin, value);
  PinSetOdc(pin, open_drain);
  PinSetTris(pin, 0);
}
示例#6
0
文件: features.c 项目: arcanex/ioio-1
void SetPinDigitalIn(int pin, int pull) {
  log_printf("SetPinDigitalIn(%d, %d)", pin, pull);
  SAVE_PIN_FOR_LOG(pin);
  PinSetAnsel(pin, 0);
  PinSetRpor(pin, 0);
  PinSetCnen(pin, 0);
  switch (pull) {
    case 1:
      PinSetCnpd(pin, 0);
      PinSetCnpu(pin, 1);
      break;

    case 2:
      PinSetCnpu(pin, 0);
      PinSetCnpd(pin, 1);
      break;

    default:
      PinSetCnpu(pin, 0);
      PinSetCnpd(pin, 0);
  }
  PinSetTris(pin, 1);
}