//##############################################################################################################
void SX1278TASK_PROCESS(void const * argument)
{
uint32_t Last;
BoardInit( );
Radio = RadioDriverInit( );
Radio->Init( );
Radio_UserInit();
Radio->StartRx( );
Last=HAL_GetTick();
while(1)
{
switch( Radio->Process( ))
{
case RF_CHANNEL_ACTIVITY_DETECTED:
__NOP();
break;
case RF_CHANNEL_EMPTY:
__NOP();__NOP();
break;
case RF_LEN_ERROR:
__NOP();__NOP();__NOP();
break;
case RF_IDLE:
__NOP();__NOP();__NOP();__NOP();
break;
case RF_BUSY:
__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
break;
case RF_RX_TIMEOUT:
Radio_RxTimeout();
break;
case RF_RX_DONE:
Radio->GetRxPacket( RadioBuffer, ( uint16_t* )&RadioLength );
if( RadioLength > 0 )
{
Radio_RxDone(RadioBuffer,RadioLength);
}
break;
case RF_TX_DONE:
__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
Radio->StartRx( );
break;
case RF_TX_TIMEOUT:
break;
default:
break;
}
osDelay(1);
if(HAL_GetTick()-Last < 100)
{
Last = HAL_GetTick();
Radio_Misc_Per100ms();
}
}
}
void RadioStart()
{
bool bTX = false;
BoardInit( );
GreenLedBlink();
RedLedBlink();
Radio = RadioDriverInit();
Radio->Init();
Radio->StartRx( );
while(1)
{
switch(Radio->Process())
{
case RF_RX_DONE:
Radio->GetRxPacket( Buffer, ( uint16_t* )&BufferSize );
if( BufferSize > 0 )
{
if (bDeviceState == CONFIGURED)
{
if (packet_sent == 1)
{
CDC_Send_DATA ((unsigned char*)Buffer,BufferSize);
}
}
}
GreenLedBlink();
Radio->StartRx( );
break;
case RF_TX_DONE:
RedLedBlink();
Radio->StartRx( );
bTX = false;
break;
default:
if (bDeviceState == CONFIGURED)
{
if(bTX) break;
if (Receive_length != 0)
{
Radio->SetTxPacket( (unsigned char*)Receive_Buffer,Receive_length );
CDC_Receive_DATA();
Receive_length = 0;
bTX = true;
}
}
break;
}
}
}
int main(void)
{
MCU_Init();
LEDG_OFF();
LEDR1_OFF();
LEDR2_OFF();
memset( TxBuf, 0, ( size_t )TxBufSize);
//GetChipId(); //获取芯片ID
//Flash_Read((uint32_t)0x0800FFF0,gateway_mac,6);
//Flash_Read((uint32_t)0x0800FFE0,net_id,2);
//Print_Array(gateway_mac,6,s1);
//Print_Array(net_id,2,s2);
//初始化Radio驱动
Radio = RadioDriverInit( );
Radio->Init( );
Radio->StartRx( );
//printf("The radio have been init!!\r\n");
while(1)
{
OnSlave();
if(receive_flag==true)
{
receive_flag=false;
Config_Handler(ReceiveBuff);
}
// IWDG_ReloadCounter();
// SignalBw [0: 7.8kHz, 1: 10.4 kHz, 2: 15.6 kHz, 3: 20.8 kHz, 4: 31.2 kHz,5: 41.6 kHz, 6: 62.5 kHz, 7: 125 kHz, 8: 250 kHz, 9: 500 kHz, other: Reserved]
//SX1276LoRaSetSignalBandwidth(8);
//SpreadingFactor [6: 64, 7: 128, 8: 256, 9: 512, 10: 1024, 11: 2048, 12: 4096 chips]
// SX1276LoRaSetSpreadingFactor( uint8_t factor );
// ErrorCoding [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
// SX1276LoRaSetErrorCoding( uint8_t value );
//// DMA_Cmd(DMA1_Channel4,ENABLE);
//// USART_DMACmd(USART1, USART_DMAReq_Tx, ENABLE);
}
}
/*
* Main application entry point.
*/
int main( void )
{
Radio = RadioDriverInit( );
Radio->Init( );
Radio->StartRx( );
while( 1 )
{
if( EnableMaster == true )
{
OnMaster( );
}
else
{
OnSlave( );
}
#if( PLATFORM == SX12xxEiger ) && ( USE_UART == 1 )
UartProcess( );
{
uint8_t data = 0;
if( UartGetChar( &data ) == UART_OK )
{
UartPutChar( data );
}
}
#endif
}
#ifdef __GNUC__
return 0;
#endif
}
