static int __init smsc_setup(void)
{
unsigned char devid, devrev;
smsc_virt = onchip_remap(SMSC_BASE, 1024, "SMSC");
if (!smsc_virt) {
panic("Unable to remap SMSC\n");
}
/* Initially the chip is in run state */
/* Put it into configuration state */
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
/* Read device ID info */
devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
printk("SMSC devid %02x rev %02x\n", devid, devrev);
/* Select the keyboard device */
SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* Select the interrupts */
/* On a PC keyboard is IRQ1, mouse is IRQ12 */
SMSC_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
SMSC_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
/* Exit the configuraton state */
outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
return 0;
}
/*
* Setup for the SMSC FDC37C93xAPM
*/
static int __init smsc_superio_setup(void)
{
unsigned char devid, devrev;
/* Initially the chip is in run state */
/* Put it into configuration state */
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
/* Read device ID info */
devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
if ( (devid==0x30) && (devrev==0x01) )
{
printk("SMSC FDC37C93xAPM SuperIO device detected\n");
}
else
{ /* not the device identity we expected */
printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n",
devid, devrev);
/* inform the keyboard driver that we have no keyboard controller */
microdev_kbd_controller_present = 0;
/* little point in doing anything else in this functon */
return 0;
}
/* Select the keyboard device */
SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* enable the interrupts */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
/* Select the Serial #1 device */
SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
/* enable the interrupts */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
/* Select the Serial #2 device */
SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
/* enable the interrupts */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
/* Select the IDE#1 device */
SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
/* select the interrupt */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
/* Select the IDE#2 device */
SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
/* select the interrupt */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
/* Select the configuration registers */
SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
/* enable the appropriate GPIO pins for IDE functionality:
* bit[0] In/Out 1==input; 0==output
* bit[1] Polarity 1==invert; 0==no invert
* bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
* bit[3:4] Function Select 00==original; 01==Alternate Function #1
*/
SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
/* Exit the configuration state */
outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
return 0;
}
