示例#1
0
文件: psxmem.c 项目: DAOWAce/pcsxr
u32 psxMemRead32(u32 mem) {
	char *p;
	u32 t;


	psxRegs.cycle += 1;

	
	t = mem >> 16;
	if (t == 0x1f80 || t == 0x9f80 || t == 0xbf80) {
		if ((mem & 0xffff) < 0x400)
			return psxHu32(mem);
		else
			return psxHwRead32(mem);
	} else {
		p = (char *)(psxMemRLUT[t]);
		if (p != NULL) {
			if (Config.Debug)
				DebugCheckBP((mem & 0xffffff) | 0x80000000, BR4);
			return SWAPu32(*(u32 *)(p + (mem & 0xffff)));
		} else {
#ifdef PSXMEM_LOG
			if (writeok) { PSXMEM_LOG("err lw %8.8lx\n", mem); }
#endif
			return 0;
		}
	}
}
示例#2
0
文件: Sio.c 项目: AlexBu/pcsx
void sioInterrupt() {
#ifdef PAD_LOG
	PAD_LOG("Sio Interrupt (CP0.Status = %x)\n", psxRegs.CP0.n.Status);
#endif
//	SysPrintf("Sio Interrupt\n");
	StatReg|= IRQ;
	psxHu32ref(0x1070)|= SWAPu32(0x80);
}
示例#3
0
void sioInterrupt() {
#ifdef PAD_LOG
	PAD_LOG("Sio Interrupt (CP0.Status = %x)\n", psxRegs.CP0.n.Status);
#endif
	if (!(StatReg & IRQ)) {
		StatReg |= IRQ;
		psxHu32ref(0x1070) |= SWAPu32(0x80);
	}
}
示例#4
0
文件: sio.c 项目: Asmodean-/PCSXR
void sioInterrupt() {
#ifdef PAD_LOG
	PAD_LOG("Sio Interrupt (CP0.Status = %x)\n", psxRegs.CP0.n.Status);
#endif
//	SysPrintf("Sio Interrupt\n");
	StatReg |= IRQ;
	psxHu32ref(0x1070) |= SWAPu32(0x80);

#if 0
	// Rhapsody: fixes input problems
	// Twisted Metal 2: breaks intro
	StatReg |= TX_RDY;
	StatReg |= RX_RDY;
#endif
}
示例#5
0
文件: psxmem.c 项目: Mystro256/wiisxr
u32 psxMemRead32(u32 mem) {
	u32 t;

	t = mem >> 16;
	if (t == 0x1f80) {
		if (mem < 0x1f801000)
			return psxHu32(mem);
		else
			return psxHwRead32(mem);
	} else {
		char *p = (char *)(psxMemRLUT[t]);
		if (p != NULL) {
			return SWAPu32(*(u32 *)(p + (mem & 0xffff)));
		} else {
#ifdef PSXMEM_LOG
			if (writeok) { PSXMEM_LOG("err lw %8.8lx\n", mem); }
#endif
			return 0;
		}
	}
}
示例#6
0
void CALLBACK SIO1irq(void) {
    psxHu32ref(0x1070) |= SWAPu32(0x100);
}
示例#7
0
int Load(const char *ExePath) {
	FILE *tmpFile;
	EXE_HEADER tmpHead;
	FILHDR coffHead;
	AOUTHDR optHead;
	SCNHDR section;
	int type, i;
	int retval = 0;
	u8 opcode;
	u32 section_address, section_size;
	void* psxmaddr;

	strncpy(CdromId, "SLUS99999", 9);
	strncpy(CdromLabel, "SLUS_999.99", 11);

	tmpFile = fopen(ExePath, "rb");
	if (tmpFile == NULL) {
		SysPrintf(_("Error opening file: %s.\n"), ExePath);
		retval = -1;
	} else {
		LoadLibPS();

		type = PSXGetFileType(tmpFile);
		switch (type) {
			case PSX_EXE:
				fread(&tmpHead, sizeof(EXE_HEADER), 1, tmpFile);
				fseek(tmpFile, 0x800, SEEK_SET);		
				fread(PSXM(SWAP32(tmpHead.t_addr)), SWAP32(tmpHead.t_size), 1, tmpFile);
				fclose(tmpFile);
				psxRegs.pc = SWAP32(tmpHead.pc0);
				psxRegs.GPR.n.gp = SWAP32(tmpHead.gp0);
				psxRegs.GPR.n.sp = SWAP32(tmpHead.s_addr); 
				if (psxRegs.GPR.n.sp == 0)
					psxRegs.GPR.n.sp = 0x801fff00;
				retval = 0;
				break;

			case CPE_EXE:
				fseek(tmpFile, 6, SEEK_SET); /* Something tells me we should go to 4 and read the "08 00" here... */
				do {
					fread(&opcode, 1, 1, tmpFile);
					switch (opcode) {
						case 1: /* Section loading */
							fread(&section_address, 4, 1, tmpFile);
							fread(&section_size, 4, 1, tmpFile);
							section_address = SWAPu32(section_address);
							section_size = SWAPu32(section_size);
#ifdef EMU_LOG
							EMU_LOG("Loading %08X bytes from %08X to %08X\n", section_size, ftell(tmpFile), section_address);
#endif
							fread(PSXM(section_address), section_size, 1, tmpFile);
							break;
						case 3: /* register loading (PC only?) */
							fseek(tmpFile, 2, SEEK_CUR); /* unknown field */
							fread(&psxRegs.pc, 4, 1, tmpFile);
							psxRegs.pc = SWAPu32(psxRegs.pc);
							break;
						case 0: /* End of file */
							break;
						default:
							SysPrintf(_("Unknown CPE opcode %02x at position %08x.\n"), opcode, ftell(tmpFile) - 1);
							retval = -1;
							break;
					}
				} while (opcode != 0 && retval == 0);
				break;

			case COFF_EXE:
				fread(&coffHead, sizeof(coffHead), 1, tmpFile);
				fread(&optHead, sizeof(optHead), 1, tmpFile);

				psxRegs.pc = SWAP32(optHead.entry);
				psxRegs.GPR.n.sp = 0x801fff00;

				for (i = 0; i < SWAP16(coffHead.f_nscns); i++) {
					fseek(tmpFile, sizeof(FILHDR) + SWAP16(coffHead.f_opthdr) + sizeof(section) * i, SEEK_SET);
					fread(&section, sizeof(section), 1, tmpFile);

					if (section.s_scnptr != 0) {
						fseek(tmpFile, SWAP32(section.s_scnptr), SEEK_SET);
						fread(PSXM(SWAP32(section.s_paddr)), SWAP32(section.s_size), 1, tmpFile);
					} else {
						psxmaddr = PSXM(SWAP32(section.s_paddr));
						assert(psxmaddr != NULL);
						memset(psxmaddr, 0, SWAP32(section.s_size));
					}
				}
				break;

			case INVALID_EXE:
				SysPrintf("%s", _("This file does not appear to be a valid PSX file.\n"));
				retval = -1;
				break;
		}
	}

	if (retval != 0) {
		CdromId[0] = '\0';
		CdromLabel[0] = '\0';
	}

	return retval;
}
示例#8
0
int Load(const char *ExePath) {
	FILE *tmpFile;
	EXE_HEADER tmpHead;
	int type;
	int retval = 0;
	u8 opcode;
	u32 section_address, section_size;
	void *mem;

	strncpy(CdromId, "SLUS99999", 9);
	strncpy(CdromLabel, "SLUS_999.99", 11);

	tmpFile = fopen(ExePath, "rb");
	if (tmpFile == NULL) {
		SysPrintf(_("Error opening file: %s.\n"), ExePath);
		retval = -1;
	} else {
		type = PSXGetFileType(tmpFile);
		switch (type) {
			case PSX_EXE:
				fread(&tmpHead,sizeof(EXE_HEADER),1,tmpFile);
				section_address = SWAP32(tmpHead.t_addr);
				section_size = SWAP32(tmpHead.t_size);
				mem = PSXM(section_address);
				if (mem != NULL) {
					fseek(tmpFile, 0x800, SEEK_SET);		
					fread_to_ram(mem, section_size, 1, tmpFile);
					psxCpu->Clear(section_address, section_size / 4);
				}
				fclose(tmpFile);
				psxRegs.pc = SWAP32(tmpHead.pc0);
				psxRegs.GPR.n.gp = SWAP32(tmpHead.gp0);
				psxRegs.GPR.n.sp = SWAP32(tmpHead.s_addr); 
				if (psxRegs.GPR.n.sp == 0)
					psxRegs.GPR.n.sp = 0x801fff00;
				retval = 0;
				break;
			case CPE_EXE:
				fseek(tmpFile, 6, SEEK_SET); /* Something tells me we should go to 4 and read the "08 00" here... */
				do {
					fread(&opcode, 1, 1, tmpFile);
					switch (opcode) {
						case 1: /* Section loading */
							fread(&section_address, 4, 1, tmpFile);
							fread(&section_size, 4, 1, tmpFile);
							section_address = SWAPu32(section_address);
							section_size = SWAPu32(section_size);
#ifdef EMU_LOG
							EMU_LOG("Loading %08X bytes from %08X to %08X\n", section_size, ftell(tmpFile), section_address);
#endif
							mem = PSXM(section_address);
							if (mem != NULL) {
								fread_to_ram(mem, section_size, 1, tmpFile);
								psxCpu->Clear(section_address, section_size / 4);
							}
							break;
						case 3: /* register loading (PC only?) */
							fseek(tmpFile, 2, SEEK_CUR); /* unknown field */
							fread(&psxRegs.pc, 4, 1, tmpFile);
							psxRegs.pc = SWAPu32(psxRegs.pc);
							break;
						case 0: /* End of file */
							break;
						default:
							SysPrintf(_("Unknown CPE opcode %02x at position %08x.\n"), opcode, ftell(tmpFile) - 1);
							retval = -1;
							break;
					}
				} while (opcode != 0 && retval == 0);
				break;
			case COFF_EXE:
				SysPrintf(_("COFF files not supported.\n"));
				retval = -1;
				break;
			case INVALID_EXE:
				SysPrintf(_("This file does not appear to be a valid PSX EXE file.\n"));
				SysPrintf(_("(did you forget -cdfile ?)\n"));
				retval = -1;
				break;
		}
	}

	if (retval != 0) {
		CdromId[0] = '\0';
		CdromLabel[0] = '\0';
	}

	return retval;
}
示例#9
0
void psxHwWrite32(u32 add, u32 value) {
	switch (add) {
	    case 0x1f801040:
			sioWrite8((unsigned char)value);
			sioWrite8((unsigned char)((value&0xff) >>  8));
			sioWrite8((unsigned char)((value&0xff) >> 16));
			sioWrite8((unsigned char)((value&0xff) >> 24));
#ifdef PAD_LOG
			PAD_LOG("sio write32 %x\n", value);
#endif
			return;
#ifdef ENABLE_SIO1API
		case 0x1f801050:
			SIO1_writeData32(value);
			return;
#endif
#ifdef PSXHW_LOG
		case 0x1f801060:
			PSXHW_LOG("RAM size write %x\n", value);
			psxHu32ref(add) = SWAPu32(value);
			return; // Ram size
#endif

		case 0x1f801070: 
#ifdef PSXHW_LOG
			PSXHW_LOG("IREG 32bit write %x\n", value);
#endif
			if (Config.Sio) psxHu32ref(0x1070) |= SWAPu32(0x80);
			if (Config.SpuIrq) psxHu32ref(0x1070) |= SWAPu32(0x200);
			psxHu32ref(0x1070) &= SWAPu32((psxHu32(0x1074) & value));
			return;
		case 0x1f801074:
#ifdef PSXHW_LOG
			PSXHW_LOG("IMASK 32bit write %x\n", value);
#endif
			psxHu32ref(0x1074) = SWAPu32(value);
			if (psxHu32ref(0x1070) & value)
				new_dyna_set_event(PSXINT_NEWDRC_CHECK, 1);
			return;

#ifdef PSXHW_LOG
		case 0x1f801080:
			PSXHW_LOG("DMA0 MADR 32bit write %x\n", value);
			HW_DMA0_MADR = SWAPu32(value); return; // DMA0 madr
		case 0x1f801084:
			PSXHW_LOG("DMA0 BCR 32bit write %x\n", value);
			HW_DMA0_BCR  = SWAPu32(value); return; // DMA0 bcr
#endif
		case 0x1f801088:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA0 CHCR 32bit write %x\n", value);
#endif
			DmaExec(0);	                 // DMA0 chcr (MDEC in DMA)
			return;

#ifdef PSXHW_LOG
		case 0x1f801090:
			PSXHW_LOG("DMA1 MADR 32bit write %x\n", value);
			HW_DMA1_MADR = SWAPu32(value); return; // DMA1 madr
		case 0x1f801094:
			PSXHW_LOG("DMA1 BCR 32bit write %x\n", value);
			HW_DMA1_BCR  = SWAPu32(value); return; // DMA1 bcr
#endif
		case 0x1f801098:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA1 CHCR 32bit write %x\n", value);
#endif
			DmaExec(1);                  // DMA1 chcr (MDEC out DMA)
			return;

#ifdef PSXHW_LOG
		case 0x1f8010a0:
			PSXHW_LOG("DMA2 MADR 32bit write %x\n", value);
			HW_DMA2_MADR = SWAPu32(value); return; // DMA2 madr
		case 0x1f8010a4:
			PSXHW_LOG("DMA2 BCR 32bit write %x\n", value);
			HW_DMA2_BCR  = SWAPu32(value); return; // DMA2 bcr
#endif
		case 0x1f8010a8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA2 CHCR 32bit write %x\n", value);
#endif
			DmaExec(2);                  // DMA2 chcr (GPU DMA)
			return;

#ifdef PSXHW_LOG
		case 0x1f8010b0:
			PSXHW_LOG("DMA3 MADR 32bit write %x\n", value);
			HW_DMA3_MADR = SWAPu32(value); return; // DMA3 madr
		case 0x1f8010b4:
			PSXHW_LOG("DMA3 BCR 32bit write %x\n", value);
			HW_DMA3_BCR  = SWAPu32(value); return; // DMA3 bcr
#endif
		case 0x1f8010b8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA3 CHCR 32bit write %x\n", value);
#endif
			DmaExec(3);                  // DMA3 chcr (CDROM DMA)
			
			return;

#ifdef PSXHW_LOG
		case 0x1f8010c0:
			PSXHW_LOG("DMA4 MADR 32bit write %x\n", value);
			HW_DMA4_MADR = SWAPu32(value); return; // DMA4 madr
		case 0x1f8010c4:
			PSXHW_LOG("DMA4 BCR 32bit write %x\n", value);
			HW_DMA4_BCR  = SWAPu32(value); return; // DMA4 bcr
#endif
		case 0x1f8010c8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA4 CHCR 32bit write %x\n", value);
#endif
			DmaExec(4);                  // DMA4 chcr (SPU DMA)
			return;

#if 0
		case 0x1f8010d0: break; //DMA5write_madr();
		case 0x1f8010d4: break; //DMA5write_bcr();
		case 0x1f8010d8: break; //DMA5write_chcr(); // Not needed
#endif

#ifdef PSXHW_LOG
		case 0x1f8010e0:
			PSXHW_LOG("DMA6 MADR 32bit write %x\n", value);
			HW_DMA6_MADR = SWAPu32(value); return; // DMA6 bcr
		case 0x1f8010e4:
			PSXHW_LOG("DMA6 BCR 32bit write %x\n", value);
			HW_DMA6_BCR  = SWAPu32(value); return; // DMA6 bcr
#endif
		case 0x1f8010e8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA6 CHCR 32bit write %x\n", value);
#endif
			DmaExec(6);                   // DMA6 chcr (OT clear)
			return;

#ifdef PSXHW_LOG
		case 0x1f8010f0:
			PSXHW_LOG("DMA PCR 32bit write %x\n", value);
			HW_DMA_PCR = SWAPu32(value);
			return;
#endif

		case 0x1f8010f4:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA ICR 32bit write %x\n", value);
#endif
		{
			u32 tmp = value & 0x00ff803f;
			tmp |= (SWAPu32(HW_DMA_ICR) & ~value) & 0x7f000000;
			if ((tmp & HW_DMA_ICR_GLOBAL_ENABLE && tmp & 0x7f000000)
			    || tmp & HW_DMA_ICR_BUS_ERROR) {
				if (!(SWAPu32(HW_DMA_ICR) & HW_DMA_ICR_IRQ_SENT))
					psxHu32ref(0x1070) |= SWAP32(8);
				tmp |= HW_DMA_ICR_IRQ_SENT;
			}
			HW_DMA_ICR = SWAPu32(tmp);
			return;
		}

		case 0x1f801810:
#ifdef PSXHW_LOG
			PSXHW_LOG("GPU DATA 32bit write %x\n", value);
#endif
			GPU_writeData(value); return;
		case 0x1f801814:
#ifdef PSXHW_LOG
			PSXHW_LOG("GPU STATUS 32bit write %x\n", value);
#endif
			GPU_writeStatus(value);
			gpuSyncPluginSR();
			return;

		case 0x1f801820:
			mdecWrite0(value); break;
		case 0x1f801824:
			mdecWrite1(value); break;

		case 0x1f801100:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 COUNT 32bit write %x\n", value);
#endif
			psxRcntWcount(0, value & 0xffff); return;
		case 0x1f801104:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 MODE 32bit write %x\n", value);
#endif
			psxRcntWmode(0, value); return;
		case 0x1f801108:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 TARGET 32bit write %x\n", value);
#endif
			psxRcntWtarget(0, value & 0xffff); return; //  HW_DMA_ICR&= SWAP32((~value)&0xff000000);

		case 0x1f801110:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 COUNT 32bit write %x\n", value);
#endif
			psxRcntWcount(1, value & 0xffff); return;
		case 0x1f801114:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 MODE 32bit write %x\n", value);
#endif
			psxRcntWmode(1, value); return;
		case 0x1f801118:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 TARGET 32bit write %x\n", value);
#endif
			psxRcntWtarget(1, value & 0xffff); return;

		case 0x1f801120:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 COUNT 32bit write %x\n", value);
#endif
			psxRcntWcount(2, value & 0xffff); return;
		case 0x1f801124:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 MODE 32bit write %x\n", value);
#endif
			psxRcntWmode(2, value); return;
		case 0x1f801128:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 TARGET 32bit write %x\n", value);
#endif
			psxRcntWtarget(2, value & 0xffff); return;

		default:
			// Dukes of Hazard 2 - car engine noise
			if (add>=0x1f801c00 && add<0x1f801e00) {
				SPU_writeRegister(add, value&0xffff);
				SPU_writeRegister(add + 2, value>>16);
				return;
			}

			psxHu32ref(add) = SWAPu32(value);
#ifdef PSXHW_LOG
			PSXHW_LOG("*Unknown 32bit write at address %x value %x\n", add, value);
#endif
			return;
	}
示例#10
0
u32 psxHwRead32(u32 add) {
	u32 hard;

	switch (add) {
		case 0x1f801040:
			hard = sioRead8();
			hard |= sioRead8() << 8;
			hard |= sioRead8() << 16;
			hard |= sioRead8() << 24;
#ifdef PAD_LOG
			PAD_LOG("sio read32 ;ret = %x\n", hard);
#endif
			return hard;
#ifdef ENABLE_SIO1API
		case 0x1f801050:
			hard = SIO1_readData32();
			return hard;
#endif
#ifdef PSXHW_LOG
		case 0x1f801060:
			PSXHW_LOG("RAM size read %x\n", psxHu32(0x1060));
			return psxHu32(0x1060);
#endif
#ifdef PSXHW_LOG
		case 0x1f801070: PSXHW_LOG("IREG 32bit read %x\n", psxHu32(0x1070));
			return psxHu32(0x1070);
#endif
#ifdef PSXHW_LOG
		case 0x1f801074: PSXHW_LOG("IMASK 32bit read %x\n", psxHu32(0x1074));
			return psxHu32(0x1074);
#endif

		case 0x1f801810:
			hard = GPU_readData();
#ifdef PSXHW_LOG
			PSXHW_LOG("GPU DATA 32bit read %x\n", hard);
#endif
			return hard;
		case 0x1f801814:
			gpuSyncPluginSR();
			hard = HW_GPU_STATUS;
			if (hSyncCount < 240 && (HW_GPU_STATUS & PSXGPU_ILACE_BITS) != PSXGPU_ILACE_BITS)
				hard |= PSXGPU_LCF & (psxRegs.cycle << 20);
#ifdef PSXHW_LOG
			PSXHW_LOG("GPU STATUS 32bit read %x\n", hard);
#endif
			return hard;

		case 0x1f801820: hard = mdecRead0(); break;
		case 0x1f801824: hard = mdecRead1(); break;

#ifdef PSXHW_LOG
		case 0x1f8010a0:
			PSXHW_LOG("DMA2 MADR 32bit read %x\n", psxHu32(0x10a0));
			return SWAPu32(HW_DMA2_MADR);
		case 0x1f8010a4:
			PSXHW_LOG("DMA2 BCR 32bit read %x\n", psxHu32(0x10a4));
			return SWAPu32(HW_DMA2_BCR);
		case 0x1f8010a8:
			PSXHW_LOG("DMA2 CHCR 32bit read %x\n", psxHu32(0x10a8));
			return SWAPu32(HW_DMA2_CHCR);
#endif

#ifdef PSXHW_LOG
		case 0x1f8010b0:
			PSXHW_LOG("DMA3 MADR 32bit read %x\n", psxHu32(0x10b0));
			return SWAPu32(HW_DMA3_MADR);
		case 0x1f8010b4:
			PSXHW_LOG("DMA3 BCR 32bit read %x\n", psxHu32(0x10b4));
			return SWAPu32(HW_DMA3_BCR);
		case 0x1f8010b8:
			PSXHW_LOG("DMA3 CHCR 32bit read %x\n", psxHu32(0x10b8));
			return SWAPu32(HW_DMA3_CHCR);
#endif

#ifdef PSXHW_LOG
/*		case 0x1f8010f0:
			PSXHW_LOG("DMA PCR 32bit read %x\n", psxHu32(0x10f0));
			return SWAPu32(HW_DMA_PCR); // dma rest channel
		case 0x1f8010f4:
			PSXHW_LOG("DMA ICR 32bit read %x\n", psxHu32(0x10f4));
			return SWAPu32(HW_DMA_ICR); // interrupt enabler?*/
#endif

		// time for rootcounters :)
		case 0x1f801100:
			hard = psxRcntRcount(0);
#ifdef PSXHW_LOG
			PSXHW_LOG("T0 count read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801104:
			hard = psxRcntRmode(0);
#ifdef PSXHW_LOG
			PSXHW_LOG("T0 mode read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801108:
			hard = psxRcntRtarget(0);
#ifdef PSXHW_LOG
			PSXHW_LOG("T0 target read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801110:
			hard = psxRcntRcount(1);
#ifdef PSXHW_LOG
			PSXHW_LOG("T1 count read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801114:
			hard = psxRcntRmode(1);
#ifdef PSXHW_LOG
			PSXHW_LOG("T1 mode read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801118:
			hard = psxRcntRtarget(1);
#ifdef PSXHW_LOG
			PSXHW_LOG("T1 target read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801120:
			hard = psxRcntRcount(2);
#ifdef PSXHW_LOG
			PSXHW_LOG("T2 count read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801124:
			hard = psxRcntRmode(2);
#ifdef PSXHW_LOG
			PSXHW_LOG("T2 mode read32: %x\n", hard);
#endif
			return hard;
		case 0x1f801128:
			hard = psxRcntRtarget(2);
#ifdef PSXHW_LOG
			PSXHW_LOG("T2 target read32: %x\n", hard);
#endif
			return hard;

		default:
			hard = psxHu32(add); 
#ifdef PSXHW_LOG
			PSXHW_LOG("*Unkwnown 32bit read at address %x\n", add);
#endif
			return hard;
	}
#ifdef PSXHW_LOG
	PSXHW_LOG("*Known 32bit read at address %x\n", add);
#endif
	return hard;
}
示例#11
0
文件: plugins.cpp 项目: zear/pcsx4all
//senquack - A generic function SPU plugins can use to acknowledge SPU interrupts:
void CALLBACK AcknowledgeSPUIRQ(void) {
	psxHu32ref(0x1070) |= SWAPu32(0x200);
}
示例#12
0
文件: psxmem.c 项目: DAOWAce/pcsxr
void psxMemWrite32(u32 mem, u32 value) {
	char *p;
	u32 t;

	
	psxRegs.cycle += 1;


	//	if ((mem&0x1fffff) == 0x71E18 || value == 0x48088800) SysPrintf("t2fix!!\n");
	t = mem >> 16;
	if (t == 0x1f80 || t == 0x9f80 || t == 0xbf80) {
		if ((mem & 0xffff) < 0x400)
			psxHu32ref(mem) = SWAPu32(value);
		else
			psxHwWrite32(mem, value);
	} else {
		p = (char *)(psxMemWLUT[t]);
		if (p != NULL) {
			if (Config.Debug)
				DebugCheckBP((mem & 0xffffff) | 0x80000000, BW4);
			*(u32 *)(p + (mem & 0xffff)) = SWAPu32(value);
#ifdef PSXREC
			psxCpu->Clear(mem, 1);
#endif
		} else {
			if (mem != 0xfffe0130) {
#ifdef PSXREC
				if (!writeok)
					psxCpu->Clear(mem, 1);
#endif

#ifdef PSXMEM_LOG
				if (writeok) { PSXMEM_LOG("err sw %8.8lx\n", mem); }
#endif
			} else {
				int i;

				// a0-44: used for cache flushing
				switch (value) {
					case 0x800: case 0x804:
						if (writeok == 0) break;
						writeok = 0;
						memset(psxMemWLUT + 0x0000, 0, 0x80 * sizeof(void *));
						memset(psxMemWLUT + 0x8000, 0, 0x80 * sizeof(void *));
						memset(psxMemWLUT + 0xa000, 0, 0x80 * sizeof(void *));

						psxRegs.ICache_valid = FALSE;
						break;
					case 0x00: case 0x1e988:
						if (writeok == 1) break;
						writeok = 1;
						for (i = 0; i < 0x80; i++) psxMemWLUT[i + 0x0000] = (void *)&psxM[(i & 0x1f) << 16];
						memcpy(psxMemWLUT + 0x8000, psxMemWLUT, 0x80 * sizeof(void *));
						memcpy(psxMemWLUT + 0xa000, psxMemWLUT, 0x80 * sizeof(void *));
						break;
					default:
#ifdef PSXMEM_LOG
						PSXMEM_LOG("unk %8.8lx = %x\n", mem, value);
#endif
						break;
				}
			}
		}
	}
}
示例#13
0
文件: psxhw.c 项目: kmooney/pcsxr
void psxHwWrite32(u32 add, u32 value) {
    switch (add) {
    case 0x1f801040:
        sioWrite8((unsigned char)value);
        sioWrite8((unsigned char)((value&0xff) >>  8));
        sioWrite8((unsigned char)((value&0xff) >> 16));
        sioWrite8((unsigned char)((value&0xff) >> 24));
#ifdef PAD_LOG
        PAD_LOG("sio write32 %x\n", value);
#endif
        return;
#ifdef ENABLE_SIO1API
    case 0x1f801050:
        SIO1_writeData32(value);
#ifdef SIO1_LOG
        SIO1_LOG("sio1 write32 %x\n", value);
#endif
        return;
#endif
#ifdef PSXHW_LOG
    case 0x1f801060:
        PSXHW_LOG("RAM size write %x\n", value);
        psxHu32ref(add) = SWAPu32(value);
        return; // Ram size
#endif

    case 0x1f801070:
#ifdef PSXHW_LOG
        PSXHW_LOG("IREG 32bit write %x\n", value);
#endif
        if (Config.SioIrq) psxHu32ref(0x1070) |= SWAPu32(0x80);
        if (Config.SpuIrq) psxHu32ref(0x1070) |= SWAPu32(0x200);
        psxHu32ref(0x1070) &= SWAPu32(value);
        return;
    case 0x1f801074:
#ifdef PSXHW_LOG
        PSXHW_LOG("IMASK 32bit write %x\n", value);
#endif
        psxHu32ref(0x1074) = SWAPu32(value);
        return;

#ifdef PSXHW_LOG
    case 0x1f801080:
        PSXHW_LOG("DMA0 MADR 32bit write %x\n", value);
        HW_DMA0_MADR = SWAPu32(value);
        return; // DMA0 madr
    case 0x1f801084:
        PSXHW_LOG("DMA0 BCR 32bit write %x\n", value);
        HW_DMA0_BCR  = SWAPu32(value);
        return; // DMA0 bcr
#endif
    case 0x1f801088:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA0 CHCR 32bit write %x\n", value);
#endif
        DmaExec(0);	                 // DMA0 chcr (MDEC in DMA)
        return;

#ifdef PSXHW_LOG
    case 0x1f801090:
        PSXHW_LOG("DMA1 MADR 32bit write %x\n", value);
        HW_DMA1_MADR = SWAPu32(value);
        return; // DMA1 madr
    case 0x1f801094:
        PSXHW_LOG("DMA1 BCR 32bit write %x\n", value);
        HW_DMA1_BCR  = SWAPu32(value);
        return; // DMA1 bcr
#endif
    case 0x1f801098:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA1 CHCR 32bit write %x\n", value);
#endif
        DmaExec(1);                  // DMA1 chcr (MDEC out DMA)
        return;

#ifdef PSXHW_LOG
    case 0x1f8010a0:
        PSXHW_LOG("DMA2 MADR 32bit write %x\n", value);
        HW_DMA2_MADR = SWAPu32(value);
        return; // DMA2 madr
    case 0x1f8010a4:
        PSXHW_LOG("DMA2 BCR 32bit write %x\n", value);
        HW_DMA2_BCR  = SWAPu32(value);
        return; // DMA2 bcr
#endif
    case 0x1f8010a8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA2 CHCR 32bit write %x\n", value);
#endif
        /* A hack that makes Vampire Hunter D title screen visible,
        /* but makes Tomb Raider II water effect to stay opaque
        /* Root cause for this problem is that when DMA2 is issued
        /* it is incompletele and still beign built by the game.
        /* Maybe it is ready when some signal comes in or within given delay?
        */
        if (dmaGpuListHackEn && value == 0x00000401 && HW_DMA2_BCR == 0x0) {
            psxDma2(SWAPu32(HW_DMA2_MADR), SWAPu32(HW_DMA2_BCR), SWAPu32(value));
            return;
        }
        DmaExec(2);                  // DMA2 chcr (GPU DMA)
        if (HW_DMA2_CHCR == 0x1000401)
            dmaGpuListHackEn=TRUE;
        return;

#ifdef PSXHW_LOG
    case 0x1f8010b0:
        PSXHW_LOG("DMA3 MADR 32bit write %x\n", value);
        HW_DMA3_MADR = SWAPu32(value);
        return; // DMA3 madr
    case 0x1f8010b4:
        PSXHW_LOG("DMA3 BCR 32bit write %x\n", value);
        HW_DMA3_BCR  = SWAPu32(value);
        return; // DMA3 bcr
#endif
    case 0x1f8010b8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA3 CHCR 32bit write %x\n", value);
#endif
        DmaExec(3);                  // DMA3 chcr (CDROM DMA)

        return;

#ifdef PSXHW_LOG
    case 0x1f8010c0:
        PSXHW_LOG("DMA4 MADR 32bit write %x\n", value);
        HW_DMA4_MADR = SWAPu32(value);
        return; // DMA4 madr
    case 0x1f8010c4:
        PSXHW_LOG("DMA4 BCR 32bit write %x\n", value);
        HW_DMA4_BCR  = SWAPu32(value);
        return; // DMA4 bcr
#endif
    case 0x1f8010c8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA4 CHCR 32bit write %x\n", value);
#endif
        DmaExec(4);                  // DMA4 chcr (SPU DMA)
        return;

#if 0
    case 0x1f8010d0:
        break; //DMA5write_madr();
    case 0x1f8010d4:
        break; //DMA5write_bcr();
    case 0x1f8010d8:
        break; //DMA5write_chcr(); // Not needed
#endif

#ifdef PSXHW_LOG
    case 0x1f8010e0:
        PSXHW_LOG("DMA6 MADR 32bit write %x\n", value);
        HW_DMA6_MADR = SWAPu32(value);
        return; // DMA6 bcr
    case 0x1f8010e4:
        PSXHW_LOG("DMA6 BCR 32bit write %x\n", value);
        HW_DMA6_BCR  = SWAPu32(value);
        return; // DMA6 bcr
#endif
    case 0x1f8010e8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA6 CHCR 32bit write %x\n", value);
#endif
        DmaExec(6);                   // DMA6 chcr (OT clear)
        return;

#ifdef PSXHW_LOG
    case 0x1f8010f0:
        PSXHW_LOG("DMA PCR 32bit write %x\n", value);
        HW_DMA_PCR = SWAPu32(value);
        return;
#endif

    case 0x1f8010f4:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA ICR 32bit write %x\n", value);
#endif
        {
            u32 tmp = (~value) & SWAPu32(HW_DMA_ICR);
            HW_DMA_ICR = SWAPu32(((tmp ^ value) & 0xffffff) ^ tmp);
            return;
        }


    case 0x1f801014:
#ifdef PSXHW_LOG
        PSXHW_LOG("SPU delay [0x1014] write32: %8.8lx\n", value);
#endif
        psxHu32ref(add) = SWAPu32(value);
        return;
    case 0x1f801810:
#ifdef PSXHW_LOG
        PSXHW_LOG("GPU DATA 32bit write %x\n", value);
#endif
        GPU_writeData(value);
        return;
    case 0x1f801814:
#ifdef PSXHW_LOG
        PSXHW_LOG("GPU STATUS 32bit write %x\n", value);
#endif
        if (value & 0x8000000)
            dmaGpuListHackEn=FALSE;
        GPU_writeStatus(value);
        return;

    case 0x1f801820:
        mdecWrite0(value);
        break;
    case 0x1f801824:
        mdecWrite1(value);
        break;

    case 0x1f801100:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 0 COUNT 32bit write %x\n", value);
#endif
        psxRcntWcount(0, value & 0xffff);
        return;
    case 0x1f801104:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 0 MODE 32bit write %x\n", value);
#endif
        psxRcntWmode(0, value);
        return;
    case 0x1f801108:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 0 TARGET 32bit write %x\n", value);
#endif
        psxRcntWtarget(0, value & 0xffff);
        return; //  HW_DMA_ICR&= SWAP32((~value)&0xff000000);

    case 0x1f801110:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 1 COUNT 32bit write %x\n", value);
#endif
        psxRcntWcount(1, value & 0xffff);
        return;
    case 0x1f801114:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 1 MODE 32bit write %x\n", value);
#endif
        psxRcntWmode(1, value);
        return;
    case 0x1f801118:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 1 TARGET 32bit write %x\n", value);
#endif
        psxRcntWtarget(1, value & 0xffff);
        return;

    case 0x1f801120:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 2 COUNT 32bit write %x\n", value);
#endif
        psxRcntWcount(2, value & 0xffff);
        return;
    case 0x1f801124:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 2 MODE 32bit write %x\n", value);
#endif
        psxRcntWmode(2, value);
        return;
    case 0x1f801128:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 2 TARGET 32bit write %x\n", value);
#endif
        psxRcntWtarget(2, value & 0xffff);
        return;

    default:
        // Dukes of Hazard 2 - car engine noise
        if (add>=0x1f801c00 && add<0x1f801e00) {
            SPU_writeRegister(add, value&0xffff);
            add += 2;
            value >>= 16;

            if (add>=0x1f801c00 && add<0x1f801e00)
                SPU_writeRegister(add, value&0xffff);
            return;
        }


        psxHu32ref(add) = SWAPu32(value);
#ifdef PSXHW_LOG
        PSXHW_LOG("*Unknown 32bit write at address %x value %x\n", add, value);
#endif
        return;
    }
示例#14
0
文件: psxhw.c 项目: kmooney/pcsxr
u32 psxHwRead32(u32 add) {
    u32 hard;

    switch (add) {
    case 0x1f801040:
        hard = sioRead8();
        hard |= sioRead8() << 8;
        hard |= sioRead8() << 16;
        hard |= sioRead8() << 24;
#ifdef PAD_LOG
        PAD_LOG("sio read32 ;ret = %x\n", hard);
#endif
        return hard;
#ifdef ENABLE_SIO1API
    case 0x1f801050:
        hard = SIO1_readData32();
#ifdef SIO1_LOG
        SIO1_LOG("sio1 read32 ;ret = %x\n", hard);
#endif
        return hard;
#endif
#ifdef PSXHW_LOG
    case 0x1f801060:
        PSXHW_LOG("RAM size read %x\n", psxHu32(0x1060));
        return psxHu32(0x1060);
#endif
#ifdef PSXHW_LOG
    case 0x1f801070:
        PSXHW_LOG("IREG 32bit read %x\n", psxHu32(0x1070));
        return psxHu32(0x1070);
#endif
#ifdef PSXHW_LOG
    case 0x1f801074:
        PSXHW_LOG("IMASK 32bit read %x\n", psxHu32(0x1074));
        return psxHu32(0x1074);
#endif

    case 0x1f801810:
        hard = GPU_readData();
#ifdef PSXHW_LOG
        PSXHW_LOG("GPU DATA 32bit read %x\n", hard);
#endif
        return hard;
    case 0x1f801814:
        hard = gpuReadStatus();
#ifdef PSXHW_LOG
        PSXHW_LOG("GPU STATUS 32bit read %x\n", hard);
#endif
        return hard;

    case 0x1f801820:
        hard = mdecRead0();
        break;
    case 0x1f801824:
        hard = mdecRead1();
        break;

#ifdef PSXHW_LOG
    case 0x1f8010a0:
        PSXHW_LOG("DMA2 MADR 32bit read %x\n", psxHu32(0x10a0));
        return SWAPu32(HW_DMA2_MADR);
    case 0x1f8010a4:
        PSXHW_LOG("DMA2 BCR 32bit read %x\n", psxHu32(0x10a4));
        return SWAPu32(HW_DMA2_BCR);
    case 0x1f8010a8:
        PSXHW_LOG("DMA2 CHCR 32bit read %x\n", psxHu32(0x10a8));
        return SWAPu32(HW_DMA2_CHCR);
#endif

#ifdef PSXHW_LOG
    case 0x1f8010b0:
        PSXHW_LOG("DMA3 MADR 32bit read %x\n", psxHu32(0x10b0));
        return SWAPu32(HW_DMA3_MADR);
    case 0x1f8010b4:
        PSXHW_LOG("DMA3 BCR 32bit read %x\n", psxHu32(0x10b4));
        return SWAPu32(HW_DMA3_BCR);
    case 0x1f8010b8:
        PSXHW_LOG("DMA3 CHCR 32bit read %x\n", psxHu32(0x10b8));
        return SWAPu32(HW_DMA3_CHCR);
#endif

#ifdef PSXHW_LOG
    case 0x1f8010f0:
        PSXHW_LOG("DMA PCR 32bit read %x\n", HW_DMA_PCR);
        return SWAPu32(HW_DMA_PCR); // DMA control register
    case 0x1f8010f4:
        PSXHW_LOG("DMA ICR 32bit read %x\n", HW_DMA_ICR);
        return SWAPu32(HW_DMA_ICR); // DMA interrupt register (enable/ack)
#endif

    // time for rootcounters :)
    case 0x1f801100:
        hard = psxRcntRcount(0);
#ifdef PSXHW_LOG
        PSXHW_LOG("T0 count read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801104:
        hard = psxRcntRmode(0);
#ifdef PSXHW_LOG
        PSXHW_LOG("T0 mode read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801108:
        hard = psxRcntRtarget(0);
#ifdef PSXHW_LOG
        PSXHW_LOG("T0 target read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801110:
        hard = psxRcntRcount(1);
#ifdef PSXHW_LOG
        PSXHW_LOG("T1 count read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801114:
        hard = psxRcntRmode(1);
#ifdef PSXHW_LOG
        PSXHW_LOG("T1 mode read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801118:
        hard = psxRcntRtarget(1);
#ifdef PSXHW_LOG
        PSXHW_LOG("T1 target read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801120:
        hard = psxRcntRcount(2);
#ifdef PSXHW_LOG
        PSXHW_LOG("T2 count read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801124:
        hard = psxRcntRmode(2);
#ifdef PSXHW_LOG
        PSXHW_LOG("T2 mode read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801128:
        hard = psxRcntRtarget(2);
#ifdef PSXHW_LOG
        PSXHW_LOG("T2 target read32: %x\n", hard);
#endif
        return hard;
    case 0x1f801014:
        hard = psxHu32(add);
#ifdef PSXHW_LOG
        PSXHW_LOG("SPU delay [0x1014] read32: %8.8lx\n", hard);
#endif
        return hard;

    default:
        hard = psxHu32(add);
#ifdef PSXHW_LOG
        PSXHW_LOG("*Unknown 32bit read at address %x (0x%8.8lx)\n", add, hard);
#endif
        return hard;
    }
#ifdef PSXHW_LOG
    PSXHW_LOG("*Known 32bit read at address %x\n", add);
#endif
    return hard;
}
示例#15
0
static inline
void setIrq( u32 irq )
{
    psxHu32ref(0x1070) |= SWAPu32(irq);
}
示例#16
0
			psxRcntWmode(2, value); return;
		case 0x1f801128:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 TARGET 32bit write %x\n", value);
#endif
			psxRcntWtarget(2, value & 0xffff); return;

		default:
			// Dukes of Hazard 2 - car engine noise
			if (add>=0x1f801c00 && add<0x1f801e00) {
				SPU_writeRegister(add, value&0xffff);
				SPU_writeRegister(add + 2, value>>16);
				return;
			}

			psxHu32ref(add) = SWAPu32(value);
#ifdef PSXHW_LOG
			PSXHW_LOG("*Unknown 32bit write at address %x value %x\n", add, value);
#endif
			return;
	}
	psxHu32ref(add) = SWAPu32(value);
#ifdef PSXHW_LOG
	PSXHW_LOG("*Known 32bit write at address %x value %x\n", add, value);
#endif
}

int psxHwFreeze(gzFile f, int Mode) {
	return 0;
}
示例#17
0
文件: spu.c 项目: Luindy/wiisxr
void CALLBACK SPUirq(void) {
	psxHu32ref(0x1070)|= SWAPu32(0x200);
	psxRegs.interrupt|= 0x80000000;
}
示例#18
0
INLINE void setIrq( u32 irq )
{
	psxHu32ref(0x1070) |= SWAPu32(irq);
// CHUI: Añado ResetIoCycle para permite que en el proximo salto entre en psxBranchTest
    	ResetIoCycle();
}